Photon sources based on spontaneous parametric down-conversion (SPDC) are central to experimental quantum optics and quantum technologies. Their performance is commonly quantified by three metrics: pair-collection probability, heralding efficiency, and spectral purity. In bulk-crystal SPDC, these metrics are known to be mutually constrained, yet the physical origin of the resulting trade-offs is often obscured. We show that these trade-offs originate from the frequency-dependent population of discrete spatial modes in the SPDC emission. By performing a Laguerre-Gauss mode decomposition at each frequency component, we show how spectral-spatial non-separability impacts collection probability, heralding efficiency, and purity. We apply this framework to two widely used quasi-phase-matching configurations: collinear degenerate type-0 and type-II SPDC in periodically poled bulk crystals, and quantify how different phase-matching functions shape the spectral-spatial mode structure. In particular, for type-II SPDC we compare standard periodically poled and aperiodically poled Gaussian phase matching. We experimentally validate some of our theoretical results using spatial- and spectral-projection measurements. This spectral-spatial mode analysis provides a quantitative and predictive framework for understanding and engineering bulk-crystal photon sources, enabling systematic multi-parameter optimization beyond qualitative design guidelines.
Both correlated-mode coupling efficiency and photon pair flux (brightness) of spontaneous parametric down-conversion (SPDC) coupled into single-mode fibers are key parameters for various quantum information science applications. We present an experimental investigation on the optimization of the correlated-mode coupling efficiency and the brightness of frequency-degenerated SPDC photon pairs into single-mode optical fibers. Using photon pairs generated from a type-I phase-matched bulk $\ensuremath{\beta}$-barium borate crystal pumped by a continuous-wave laser, we carefully evaluated both the correlated-mode coupling efficiency and the brightness of SPDC light coupled to a single-mode optical fiber, while continuously changing the focusing of the pump and collection modes, experimenting with Rayleigh lengths from 3 to 280 (for the pump) and 0.2 to 20 (for the collection) times the crystal length. The measured data suggest that the correlated-mode coupling efficiency can be close to unity for any pump focus, however, the optimal Rayleigh length of the collection mode depends on the pump focus parameter, and the brightness can be increased by tightening the pump focus, provided that the Rayleigh length of the collection mode is precisely adjusted. A maximal correlated-mode coupling efficiency of $99.0\ifmmode\pm\else\textpm\fi{}1.3%$ was experimentally achieved. These results will be useful for photonic quantum science and technology using SPDC sources with high heralding efficiencies.
Sources of photon pairs based on the spontaneous parametric down-conversion process are commonly used for long-distance quantum communication and quantum information processing. The key feature for improving the range of transmission is engineering their spectral properties. Our analysis shows the way for full control of spectral correlation within a fiber-coupled photon pair. The result of extensive numerical simulations allows us to specify the settings for the generation of pairs featuring positive-energy correlation, which can potentially improve the signal-to-noise ratio in practical implementation of quantum communication protocols. We analytically and numerically analyze the characteristics of a source based on a $\ensuremath{\beta}$-barium borate crystal cut for type-II phase matching at the degenerated frequencies $755\phantom{\rule{4pt}{0ex}}\mathrm{nm} \ensuremath{\rightarrow}1550\phantom{\rule{4pt}{0ex}}\mathrm{nm}+1550\phantom{\rule{4pt}{0ex}}\mathrm{nm}$. The presented framework is general and can be applied to other crystals.
The spectral properties of entangled photon pairs generated via quasi-phased matching in spontaneous parametric down-conversion are proposed and demonstrated experimentally.A general mathematical model for evaluating the spectral properties is developed to obtain the spectrum shape and range of down-converted photons.The model takes into account the effects of phase mismatching due to non-ideal pumping and the relationship between crystal periodic modulation function and the incidence angle of the pump beam.The spectrum curve shape is determined by the discrete Fourier transform of a Gaussian pump beam and the integration of parametric down-conversion generated by an individual plane wave.An experiment is carried out with a PPLN non-linear crystal and dispersing optics, which shows a good consistency in their spectral ranges and shapes with our model predictions within the spectrum of 600-633 nm.This therefore illustrates that both the simulation model and the experimental process are reasonable.This novel method has potential applications in high-accuracy calibration in the wide spectrum using correlated photons.
We present a theoretical and experimental investigation of the emission characteristics and the flux of photon pairs generated by spontaneous parametric downconversion in quasi-phase matched bulk crystals for the use in quantum communication sources. We show that, by careful design, one can attain well defined modes close to the fundamental mode of optical fibers and obtain high coupling efficiencies also for bulk crystals, these being more easily aligned than crystal waveguides. We distinguish between singles coupling, ${\ensuremath{\gamma}}_{\mathrm{s}}$ and ${\ensuremath{\gamma}}_{\mathrm{i}}$, conditional coincidence, ${\ensuremath{\mu}}_{\mathrm{i}\ensuremath{\mid}\mathrm{s}}$, and pair coupling, ${\ensuremath{\gamma}}_{\mathrm{c}}$, and show how each of these parameters can be maximized by varying the focusing of the pump mode and the fiber-matched modes using standard optical elements. Specifically we analyze a periodically poled KTP-crystal pumped by a
532nm laser creating photon pairs at
810nm and
1550nm. Numerical calculations lead to coupling efficiencies above 93% at optimal focusing, which is found by the geometrical relation
L∕zR to be $\ensuremath{\approx}1$ to 2 for the pump mode and $\ensuremath{\approx}2$ to 3 for the fiber-modes, where
L is the crystal length and
zR is the Rayleigh-range of the mode-profile. These results are independent on
L. By showing that the single-mode bandwidth decreases $\ensuremath{\propto}1∕L$, we can therefore design the source to produce and couple narrow bandwidth photon pairs well into the fibers. Smaller bandwidth means both less chromatic dispersion for long propagation distances in fibers, and that telecom Bragg gratings can be utilized to compensate for broadened photon packets---a vital problem for time-multiplexed qubits. Longer crystals also yield an increase in fiber photon flux $\ensuremath{\propto}\sqrt{L}$, and so, assuming correct focusing, we can only see advantages using long crystals.
There are several problems that must be solved in order to increase the distance of quantum communication protocols based on photons as an information carriers. One of them is the dispersion, whose effects can be minimized by engineering spectral properties of transmitted photons. In particular, it is expected that positively correlated photon pairs can be very useful. We present the full characterization of a source of single photon pairs at a telecom wavelength based on type II spontaneous parametric down conversion (SPDC) process in a beta-barium borate (BBO) crystal. In the type II process, a pump photon, which is polarized extraordinarily, splits in a nonlinear medium into signal and idler photons, which are polarized perpendicularly to each other. In order for the process to be efficient a phase matching condition must be fulfilled. These conditions originate from momentum and energy conservation rules and put severe restrictions on source parameters. Seemingly, these conditions force the photon pair to be negatively correlated in their spectral domain. However, it is possible to achieve positive correlation for pulsed pumping. The experimentally available degrees of freedom of a source are the width of the pumping beam, the collected modes’ widths, the length of the nonlinear crystal and the duration of the pumping pulse. In our numerical model we use the following figures of merit: the pair production rate, the efficiency of photon coupling into a single mode fiber, the spectral correlation of the coupled photon pair. The last one is defined as the Pearson correlation parameter for a joint spectral distribution. The aim here is to find the largest positive spectral correlation and the highest coupling efficiency. By resorting to the numerical model Ref. [1] we showed in Ref. [2], that by careful adjustment of the pump’s and the collected modes’ characteristics, one can optimize any of the source's parameters. Our numerical outcomes conform to the experimental results presented in Refs [3,4]. Here we investigate typical, experimentally available source parameters: the widths of the pump beam and collected modes ranging from 20μm to 500m, the crystal length ranging from 1mm to 7.5mm while the pulse duration is set to 50fs, 100fs or 150fs. We achieve the correlation coefficient value as high as approximately 0.8, or – for different values of parameters – coupling efficiency equal to 0.76.