Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0901.2997 · IEEE Journal of Quantum Electronics

Slow Light of an Amplitude-Modulated Gaussian Pulse in Cesium Vapor

Wenzhuo Tang, Bin Luo, Yu Liu, Hong Mei Guo

Published Mar 1, 2010• 1 citation
arXivHTMLPDF

Abstract

Slow light of an amplitude-modulated Gaussian (AMG) pulse in cesium vapor is demonstrated and studied, since the appropriate amplitude modulation to a single pulse can enrich its spectrum and even enhance the bandwidth utilization efficiency of the slow light system. In a single- ¿ type electromagnetically induced transparency (EIT) system, the slowed AMG pulse experiences severe distortion, which is mainly owing to the frequency dependent transmission of medium. Additionally, due to its spectral distribution, the frequency dependent dispersion of the medium causes simultaneous slow and fast light for different spectral components and thus a certain dispersive distortion of the AMG pulse. Further, a post-processing method is proposed to recover the slowed (distorted) pulse, which indicates that, by introducing a linear optical system with desired gain spectrum, the optical pulse can be recovered in an ¿all-optical¿ way. Finally, we discuss the limitations of this compensation procedure in detail. Although this method is demonstrated in the cesium vapor using EIT, it is also applicable to a wide range of slow light systems.

DOI
10.1109/jqe.2009.2034122

Related papers

EFFECTS OF MODULATION SCHEMES ON OPTICAL PULSES TRANSITING AN ELECTROMAGNETICALLY INDUCED TRANSPARENT MEDIUM

Wachter, Christian F.

This thesis investigates the result of modulation schemes in electromagnetically induced transparency (EIT) in rubidium vapor. Through the process of EIT, a control beam can be used to change the optical properties of a medium experienced by a probe field, generating a transparency window. The corresponding change in index of refraction results in slowed group velocity while the beam propagates through the medium. Modulation is used to transmit a message signal through a medium. In classical systems, this entails converting data into a radio frequency by adding a message to an electronic or optical carrier signal. The properties of EIT, light-slowing, and their impacts on a probe pulse with modulation will be confirmed through a detailed semi-classical analysis and by experimental observation.

•Sep 1, 2023•0 citations

Pulse distortion in linear slow light systems: theoretical limits and compensation strategies

Miguel González‐Herráez, Luc Thévenaz

We study analytically pulse distortion in linear slow light systems, and provide some useful limits on these devices. Additionally, we also show that the contributions of phase and amplitude broadening can be de-coupled and quantified. It is observed that phase broadening is generally smaller than amplitude broadening in conventional slow light media (lorentzian gain profile) except for very large fractional delays, where it becomes larger. Upon these expressions, we may envisage new strategies to minimize the distortion in the delaying of pulses, depending on the specific application and the required fractional delay. To overcome the residual distortion, we show that nonlinear systems can lead to a resharpening of the pulses and a re-generation of the filtered frequencies.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 10, 2011•2 citations

Optical filter with electromagnetically induced transparency

J. Odeurs, R. N. Shakhmuratov

This report shows that the electromagnetically-induced transparency (EIT) window can be used as a time-to-frequency filter for the probe pulse whose spectrum is much broader than the width of the EIT window. This study demonstrates that the narrow spectral region of the pulse, coincident with the EIT window, develops in a long Gaussian pulse with slow group velocity. An analytical theory is developed describing the propagation of a small amplitude pulse through an optically dense absorptive medium with a narrow EIT window.

European Quantum Electronics Conference (EQEC)•Jan 18, 2006•0 citations

Implementations of slow light using double-resonances

Ryan M. Camacho

Many practical applications of slow optical pulse propagation (slow light) require that a pulse be delayed by many times its temporal width, or equivalently that the product of the pulse’s delay and bandwidth greatly exceed unity. Implementations in optical buffering, quantum memories, remote sensing, interferometry, and chip-scale optical circuits, for example, would be enabled by large delay-bandwidth products. While in the last decade researchers have succeeded in slowing optical pulses by up to a factor of 10 7, for a variety of reasons they have not made exceptional progress in demonstrating large delay-bandwidth products. The present work investigates the slow propagation of optical pulses whose carrier frequency lies between two strongly absorbing Lorentzian resonances in an atomic vapor and how this system mitigates the delay-bandwidth problem. My studies show that owing to the symmetry of the double-resonance configuration, pulse distortion is reduced in such a way that multiple pulse delays are possible. Detailed theoretical and experimental investigations are undertaken to understand the physical origins of this effect, revealing an important interplay between absorption and dispersion which allows for large delay-bandwidth products. Specifically, I report on two proof-of-principle experiments demonstrating tens of pulse delays using the incoherent ground-state hyperfine resonances in 85 Rb and Cs, and develop a concise model based on dispersion theory using Feynman diagrams. Several implementations of the scheme are then demonstrated experimentally, including applications to imaging, interferometry, and quantum entanglement. It is shown that double-resonances may also be prepared in a coherent fashion, allowing for tunable resonance parameters, fast switching, and applications in nonlinear optics. Finally, it is shown that coherent preparation of an atomic vapor may extend the results on slow images to much longer time scales, where atomic diffusion begins to dominate image distortion. A 4f imaging method using analog Fourier optics is shown to mitigate this complication. My work concludes with a summary of the principle results and a discussion of their implications.

•Jan 1, 2008•0 citations

Producing slow light in warm alkali vapor using electromagnetically induced transparency

Kenneth DeRose, Kefeng Jiang, Jianqiao Li +4 more

We present undergraduate-friendly instructions on how to produce light pulses propagating through warm Rubidium vapor with speeds less than 400 m/s, i.e., nearly a million times slower than c. We elucidate the role played by electromagnetically induced transparency (EIT) in producing slow light pulses and discuss how to achieve the required experimental conditions. The optical setup is presented, and details provided for preparation of pump, probe, and reference pulses of the required size, frequency, intensity, temporal width, and polarization purity. EIT-based slow light pulses provide the most widely studied architecture for creating quantum memories. Therefore, the basic concepts presented here are useful for physics and engineering majors who wish to get involved in the development of cutting-edge quantum technologies.

arXiv:2011.09229•American Journal of Physics•Feb 17, 2023•26 citations

Physical limits to broadening compensation in a linear slow light system

Miguel González‐Herráez, Luc Thévenaz

The dispersion experienced by a signal in a slow light system leads to a significant pulse broadening and sets a limit to the maximum delay actually achievable by the system. To overcome this limitation, a substantial research effort is currently being carried out, and successful strategies to reduce distortion in linear slow light systems have already been demonstrated. Recent theoretical and experimental works have even claimed the achievement of zero-broadening of pulses in these systems. In this work we obtain some physical limits to broadening compensation in linear slow light systems based on simple Fourier analysis. We show that gain and dispersion broadening can never compensate in such a system. Additionally, it is simply proven that all the linear slow light systems that introduce a low-pass filtering of the signal (a reduction in the signal root-mean- square spectral width), will always cause pulse broadening. These demonstrations are done using a rigorous shape-independent definition of pulse width (the root-mean-square temporal width) and arguments borrowed from time-frequency analysis.

Optics Express•Mar 10, 2009•18 citations
Slow light of an amplitude-modulated Gaussian (AMG) pulse in cesium vapor is demonstrated and studied, since the appropriate amplitude modulation to a single pulse can enrich its spectrum and even enhance the bandwidth utilization efficiency of the slow light system. In a single- ¿ type electromagnetically induced transparency (EIT) system, the slowed AMG pulse experiences severe distortion, which is mainly owing to the frequency dependent transmission of medium. Additionally, due to its spectral distribution, the frequency dependent dispersion of the medium causes simultaneous slow and fast light for different spectral components and thus a certain dispersive distortion of the AMG pulse. Further, a post-processing method is proposed to recover the slowed (distorted) pulse, which indicates that, by introducing a linear optical system with desired gain spectrum, the optical pulse can be recovered in an ¿all-optical¿ way. Finally, we discuss the limitations of this compensation procedure in detail. Although this method is demonstrated in the cesium vapor using EIT, it is also applicable to a wide range of slow light systems.
This thesis investigates the result of modulation schemes in electromagnetically induced transparency (EIT) in rubidium vapor. Through the process of EIT, a control beam can be used to change the optical properties of a medium experienced by a probe field, generating a transparency window. The corresponding change in index of refraction results in slowed group velocity while the beam propagates through the medium. Modulation is used to transmit a message signal through a medium. In classical systems, this entails converting data into a radio frequency by adding a message to an electronic or optical carrier signal. The properties of EIT, light-slowing, and their impacts on a probe pulse with modulation will be confirmed through a detailed semi-classical analysis and by experimental observation.
We study analytically pulse distortion in linear slow light systems, and provide some useful limits on these devices. Additionally, we also show that the contributions of phase and amplitude broadening can be de-coupled and quantified. It is observed that phase broadening is generally smaller than amplitude broadening in conventional slow light media (lorentzian gain profile) except for very large fractional delays, where it becomes larger. Upon these expressions, we may envisage new strategies to minimize the distortion in the delaying of pulses, depending on the specific application and the required fractional delay. To overcome the residual distortion, we show that nonlinear systems can lead to a resharpening of the pulses and a re-generation of the filtered frequencies.
This report shows that the electromagnetically-induced transparency (EIT) window can be used as a time-to-frequency filter for the probe pulse whose spectrum is much broader than the width of the EIT window. This study demonstrates that the narrow spectral region of the pulse, coincident with the EIT window, develops in a long Gaussian pulse with slow group velocity. An analytical theory is developed describing the propagation of a small amplitude pulse through an optically dense absorptive medium with a narrow EIT window.
Many practical applications of slow optical pulse propagation (slow light) require that a pulse be delayed by many times its temporal width, or equivalently that the product of the pulse’s delay and bandwidth greatly exceed unity. Implementations in optical buffering, quantum memories, remote sensing, interferometry, and chip-scale optical circuits, for example, would be enabled by large delay-bandwidth products. While in the last decade researchers have succeeded in slowing optical pulses by up to a factor of 10 7, for a variety of reasons they have not made exceptional progress in demonstrating large delay-bandwidth products. The present work investigates the slow propagation of optical pulses whose carrier frequency lies between two strongly absorbing Lorentzian resonances in an atomic vapor and how this system mitigates the delay-bandwidth problem. My studies show that owing to the symmetry of the double-resonance configuration, pulse distortion is reduced in such a way that multiple pulse delays are possible. Detailed theoretical and experimental investigations are undertaken to understand the physical origins of this effect, revealing an important interplay between absorption and dispersion which allows for large delay-bandwidth products. Specifically, I report on two proof-of-principle experiments demonstrating tens of pulse delays using the incoherent ground-state hyperfine resonances in 85 Rb and Cs, and develop a concise model based on dispersion theory using Feynman diagrams. Several implementations of the scheme are then demonstrated experimentally, including applications to imaging, interferometry, and quantum entanglement. It is shown that double-resonances may also be prepared in a coherent fashion, allowing for tunable resonance parameters, fast switching, and applications in nonlinear optics. Finally, it is shown that coherent preparation of an atomic vapor may extend the results on slow images to much longer time scales, where atomic diffusion begins to dominate image distortion. A 4f imaging method using analog Fourier optics is shown to mitigate this complication. My work concludes with a summary of the principle results and a discussion of their implications.
We present undergraduate-friendly instructions on how to produce light pulses propagating through warm Rubidium vapor with speeds less than 400 m/s, i.e., nearly a million times slower than c. We elucidate the role played by electromagnetically induced transparency (EIT) in producing slow light pulses and discuss how to achieve the required experimental conditions. The optical setup is presented, and details provided for preparation of pump, probe, and reference pulses of the required size, frequency, intensity, temporal width, and polarization purity. EIT-based slow light pulses provide the most widely studied architecture for creating quantum memories. Therefore, the basic concepts presented here are useful for physics and engineering majors who wish to get involved in the development of cutting-edge quantum technologies.
The dispersion experienced by a signal in a slow light system leads to a significant pulse broadening and sets a limit to the maximum delay actually achievable by the system. To overcome this limitation, a substantial research effort is currently being carried out, and successful strategies to reduce distortion in linear slow light systems have already been demonstrated. Recent theoretical and experimental works have even claimed the achievement of zero-broadening of pulses in these systems. In this work we obtain some physical limits to broadening compensation in linear slow light systems based on simple Fourier analysis. We show that gain and dispersion broadening can never compensate in such a system. Additionally, it is simply proven that all the linear slow light systems that introduce a low-pass filtering of the signal (a reduction in the signal root-mean- square spectral width), will always cause pulse broadening. These demonstrations are done using a rigorous shape-independent definition of pulse width (the root-mean-square temporal width) and arguments borrowed from time-frequency analysis.