Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Physical limits to broadening compensation in a linear slow light system

Miguel González‐Herráez, Luc Thévenaz

Published Mar 10, 2009• 18 citations
Publisher

Abstract

The dispersion experienced by a signal in a slow light system leads to a significant pulse broadening and sets a limit to the maximum delay actually achievable by the system. To overcome this limitation, a substantial research effort is currently being carried out, and successful strategies to reduce distortion in linear slow light systems have already been demonstrated. Recent theoretical and experimental works have even claimed the achievement of zero-broadening of pulses in these systems. In this work we obtain some physical limits to broadening compensation in linear slow light systems based on simple Fourier analysis. We show that gain and dispersion broadening can never compensate in such a system. Additionally, it is simply proven that all the linear slow light systems that introduce a low-pass filtering of the signal (a reduction in the signal root-mean- square spectral width), will always cause pulse broadening. These demonstrations are done using a rigorous shape-independent definition of pulse width (the root-mean-square temporal width) and arguments borrowed from time-frequency analysis.

DOI
10.1364/oe.17.004732

Related papers

Pulse distortion in linear slow light systems: theoretical limits and compensation strategies

Miguel González‐Herráez, Luc Thévenaz

We study analytically pulse distortion in linear slow light systems, and provide some useful limits on these devices. Additionally, we also show that the contributions of phase and amplitude broadening can be de-coupled and quantified. It is observed that phase broadening is generally smaller than amplitude broadening in conventional slow light media (lorentzian gain profile) except for very large fractional delays, where it becomes larger. Upon these expressions, we may envisage new strategies to minimize the distortion in the delaying of pulses, depending on the specific application and the required fractional delay. To overcome the residual distortion, we show that nonlinear systems can lead to a resharpening of the pulses and a re-generation of the filtered frequencies.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 10, 2011•2 citations

Complete broadening compensation in a slow light system using a non-linear regeneration element

Sanghoon Chin, Miguel González‐Herráez, Luc Thévenaz

We demonstrate experimentally a new configuration to realize zero-broadening slow light. The inevitable pulse broadening in the slow light medium was completely compensated by a nonlinear regeneration element. Experimental results show 1.3-bit delays without distortion.

Advances in Optical Sciences Congress•Jan 1, 2009•1 citation

Distortion reduction in Slow Light systems based on stimulated Brillouin scattering

Thomas Schneider, Ronny Henker, Kai-Uwe Lauterbach +1 more

We show a simple method to reduce the distortions in SBS based slow light systems. The distortion reduction is simply based on a broadening and adaptation of the gain bandwidth. However, a broadened gain reduces the achievable fractional delay which cannot be compensated by higher pump powers. Here we will show that this compensation can be done by additional loss spectra. With the presented method low distortions for high fractional pulse delays are possible. We show the theory and experimental verifications of our method. For Gaussian pulses with a fractional delay of 1 Bit we achieved a distortion reduction of around 23%.

Optics Express•May 22, 2008•31 citations

Analytical expression of pulse broadening in an arbitrary linear slow light medium

Miguel González‐Herráez, Sonia Martín‐López, Luc Thévenaz

We derive an analytical expression for the broadening of a Gaussian input pulse in an arbitrary linear slow light medium. The expression consists of two terms, one corresponding to amplitude broadening (low-pass filtering of the pulse bandwidth) and another corresponding to phase broadening (phase dispersion around the resonance). It is shown that for a Lorentzian gain profile, the amplitude broadening is dominant at small fractional delays. However, for large fractional delays, phase broadening is inevitably dominate.

Optics Letters•Jul 24, 2012•6 citations

Comparative investigation of zero-broadening methods in Brillouin based slow-light systems

Andrzej Wiatrek, Ronny Henker, Stefan Preußler +1 more

The manipulation of the velocity of optical pulses in fibers by so-called slow-light systems seems to be very promising for future all-optical networks, but actual approaches suffer from an inevitable pulse broadening due to the delay process. In this article two different methods for the achievement of zero-broadening in Brillouin based slow-light systems are compared in theory and experiment. While one system works in the saturated regime of a Brillouin amplifier the other works in its linear regime. Both approaches fully avoid the system inherent broadening of conventional slow-light delays and can therefore extend such systems to increase their efficiency significantly. (6 pages)

Irish Signals and Systems Conference•Jan 1, 2009•2 citations

Broadening-free stimulated Brillouin scattering-based slow and fast light in optical fibers

Thomas Schneider, Andrzej Wiatrek

The manipulation of the group velocity of optical signals (slow and fast light) has many possible applications in telecommunications, sensing, nonlinear optics, and so on. The exploitation of the effect of stimulated Brillouin scattering (SBS) is of special interest for the alteration of the group velocity in optical fibers, since it just requires standard telecom equipment and low-to-moderate optical power. However, each delay in one single, low-gain SBS-based slow-light system is accompanied by a pulse broadening. This is a result of the inherent Kramers–Kronig relations among the gain, the phase change, and the accompanied group velocity. For an ideal flat gain, the phase change is nonideal, and for an ideal phase change the gain curve leads to a broadening. Furthermore, if the gain bandwidth is adapted to the signal by broadening, the delay will be reduced. Thus the signal broadening can be reduced by several methods for one single low-gain slow-light system, but it cannot be zero. Here, we will show how a zero-broadening SBS-based slow light can be achieved with several methods. The basic idea is a reshaping of the original pulse in a second stage by saturation of the SBS system, or by the superposition of two gains. As will be shown, all of these systems show an almost ideal overall gain and phase function over the bandwidth of the pulses. Thus, SBS-based slow light with a delay bandwidth product of 1 bit and zero distortion is possible.

Optical Engineering•Aug 25, 2014•0 citations
The dispersion experienced by a signal in a slow light system leads to a significant pulse broadening and sets a limit to the maximum delay actually achievable by the system. To overcome this limitation, a substantial research effort is currently being carried out, and successful strategies to reduce distortion in linear slow light systems have already been demonstrated. Recent theoretical and experimental works have even claimed the achievement of zero-broadening of pulses in these systems. In this work we obtain some physical limits to broadening compensation in linear slow light systems based on simple Fourier analysis. We show that gain and dispersion broadening can never compensate in such a system. Additionally, it is simply proven that all the linear slow light systems that introduce a low-pass filtering of the signal (a reduction in the signal root-mean- square spectral width), will always cause pulse broadening. These demonstrations are done using a rigorous shape-independent definition of pulse width (the root-mean-square temporal width) and arguments borrowed from time-frequency analysis.
We study analytically pulse distortion in linear slow light systems, and provide some useful limits on these devices. Additionally, we also show that the contributions of phase and amplitude broadening can be de-coupled and quantified. It is observed that phase broadening is generally smaller than amplitude broadening in conventional slow light media (lorentzian gain profile) except for very large fractional delays, where it becomes larger. Upon these expressions, we may envisage new strategies to minimize the distortion in the delaying of pulses, depending on the specific application and the required fractional delay. To overcome the residual distortion, we show that nonlinear systems can lead to a resharpening of the pulses and a re-generation of the filtered frequencies.
We show a simple method to reduce the distortions in SBS based slow light systems. The distortion reduction is simply based on a broadening and adaptation of the gain bandwidth. However, a broadened gain reduces the achievable fractional delay which cannot be compensated by higher pump powers. Here we will show that this compensation can be done by additional loss spectra. With the presented method low distortions for high fractional pulse delays are possible. We show the theory and experimental verifications of our method. For Gaussian pulses with a fractional delay of 1 Bit we achieved a distortion reduction of around 23%.
We derive an analytical expression for the broadening of a Gaussian input pulse in an arbitrary linear slow light medium. The expression consists of two terms, one corresponding to amplitude broadening (low-pass filtering of the pulse bandwidth) and another corresponding to phase broadening (phase dispersion around the resonance). It is shown that for a Lorentzian gain profile, the amplitude broadening is dominant at small fractional delays. However, for large fractional delays, phase broadening is inevitably dominate.
The manipulation of the velocity of optical pulses in fibers by so-called slow-light systems seems to be very promising for future all-optical networks, but actual approaches suffer from an inevitable pulse broadening due to the delay process. In this article two different methods for the achievement of zero-broadening in Brillouin based slow-light systems are compared in theory and experiment. While one system works in the saturated regime of a Brillouin amplifier the other works in its linear regime. Both approaches fully avoid the system inherent broadening of conventional slow-light delays and can therefore extend such systems to increase their efficiency significantly. (6 pages)
The manipulation of the group velocity of optical signals (slow and fast light) has many possible applications in telecommunications, sensing, nonlinear optics, and so on. The exploitation of the effect of stimulated Brillouin scattering (SBS) is of special interest for the alteration of the group velocity in optical fibers, since it just requires standard telecom equipment and low-to-moderate optical power. However, each delay in one single, low-gain SBS-based slow-light system is accompanied by a pulse broadening. This is a result of the inherent Kramers–Kronig relations among the gain, the phase change, and the accompanied group velocity. For an ideal flat gain, the phase change is nonideal, and for an ideal phase change the gain curve leads to a broadening. Furthermore, if the gain bandwidth is adapted to the signal by broadening, the delay will be reduced. Thus the signal broadening can be reduced by several methods for one single low-gain slow-light system, but it cannot be zero. Here, we will show how a zero-broadening SBS-based slow light can be achieved with several methods. The basic idea is a reshaping of the original pulse in a second stage by saturation of the SBS system, or by the superposition of two gains. As will be shown, all of these systems show an almost ideal overall gain and phase function over the bandwidth of the pulses. Thus, SBS-based slow light with a delay bandwidth product of 1 bit and zero distortion is possible.