Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0901.1009 · Physical Review B

Dynamics of a SQUID ratchet coupled to a nanomechanical resonator

Stefano Pugnetti, Yaroslav M. Blanter, Fabrizio Dolcini, Rosario Fazio

Published May 11, 2009• 8 citations
arXivHTMLPDF

Abstract

We investigate the dynamics of a superconducting rectifying circuit, namely, a three-junction superconducting quantum interference device (SQUID), where one arm of the superconducting loop consists of a nanomechanical resonator. We find that the dc characteristic curve of the system displays features that are directly related to the frequency and amplitude of the mechanical oscillations; these effects can be further enhanced by biasing the SQUID with an ac current. We discuss potential future developments of this idea in the field of ultrasensitive position detection, and assess their feasibility in current setups.

DOI
10.1103/physrevb.79.174516

Related papers

Tunable strong nonlinearity of a micromechanical beam embedded in a dc-superconducting quantum interference device

Lior Ella, D. Yuvaraj, Oren Suchoi +2 more

We present a study of the controllable nonlinear dynamics of a micromechanical beam coupled to a dc-SQUID (superconducting quantum interference device). The coupling between these systems places the modes of the beam in a highly nonlinear potential, whose shape can be altered by varying the bias current and applied flux of the SQUID. We detect the position of the beam by placing it in an optical cavity, which sets free the SQUID to be used solely for actuation. This enables us to probe the previously unexplored full parameter space of this device. We measure the frequency response of the beam and find that it displays a Duffing oscillator behavior which is periodic in the applied magnetic flux. To account for this, we develop a model based on the standard theory for SQUID dynamics. In addition, with the aim of understanding if the device can reach nonlinearity at the single phonon level, we use this model to show that the responsivity of the current circulating in the SQUID to the position of the beam can become divergent, with its magnitude limited only by noise. This suggests a direction for the generation of macroscopically distinguishable superposition states of the beam.

arXiv:1312.1247•Journal of Applied Physics•Jan 6, 2015•4 citations

Multistability of a Josephson parametric amplifier coupled to a mechanical resonator

Olga Shevchuk, Rosario Fazio, Yaroslav M. Blanter

We study the dynamics of a Josephson parametric amplifier (JPA) coupled to a mechanical oscillator, as realized with a dc superconducting quantum interference device (SQUID) with an embedded movable arm. We analyze this system in the regime when the frequency of the mechanical oscillator is comparable in magnitude to the plasma oscillation of the SQUID. When the nanomechanical resonator is driven, it strongly affects the dynamics of the JPA. We show that this coupling can considerably modify the dynamics of the JPA and induce its multistability rather than common bistability. This analysis is relevant if one considers a JPA for detection of mechanical motion.

arXiv:1405.6991•Physical Review B•Nov 11, 2014•4 citations

A coupled DC SQUID with low 1/f noise

Heikki Seppä, M. Kiviranta, Alexandre Satrapinski +3 more

A low-noise coupled DC superconducting quantum interference device (SQUID) especially optimized for low frequency is discussed. Using large Josephson junctions and a low loop inductance the contribution of the critical current fluctuation to 1/f noise can be minimized. To minimize the inductance the Josephson junctions are placed in the center of the washer close to the SQUID loop. A scaled-up copper model of the SQUID and the signal coil is used to analyze the impedance of the SQUID loop affected by the signal coil. An equivalent circuit model describing the effective inductance of the SQUID loop as a function of the frequency is used to design appropriate damping of the resonances. The DC SQUID characteristics are smooth and the noise performance of the SQUID does not markedly suffer from resonances. The contribution of the 1/f noise at 1 Hz is found to be about 5*10/sup -7/ Phi /sub 0// square root Hz.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•25 citations

Tunable Backaction of a DC SQUID on an Integrated Micromechanical Resonator

Menno Poot, Samir Etaki, Imran Mahboob +4 more

We have measured the backaction of a dc superconducting quantum interference device (SQUID) position detector on an integrated 1 MHz flexural resonator. The frequency and quality factor of the micromechanical resonator can be tuned with bias current and applied magnetic flux. The backaction is caused by the Lorentz force due to the change in circulating current when the resonator displaces. The experimental features are reproduced by numerical calculations using the resistively and capacitively shunted junction model.

arXiv:1009.4115•Physical Review Letters•Nov 10, 2010•29 citations

Coupling carbon nanotube mechanics to a superconducting circuit

Ben H. Schneider, Samir Etaki, Herre S. J. van der Zant +1 more

The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coherent photons or a superconducting device, coupled to the resonators motion. For nanotubes, however, this is a challenge due to their small size. Here, we couple a carbon nanoelectromechanical (NEMS) device to a superconducting circuit. Suspended carbon nanotubes act as both superconducting junctions and moving elements in a Superconducting Quantum Interference Device (SQUID). We observe a strong modulation of the flux through the SQUID from displacements of the nanotube. Incorporating this SQUID into superconducting resonators and qubits should enable the detection and manipulation of nanotube mechanical quantum states at the single-phonon level.

arXiv:1209.1514•Scientific Reports•Sep 3, 2012•68 citations

Effect of capacitive feedback on the characteristics of direct current superconducting quantum interference device coupled to a multiturn input coil

Tadashi Minotani, Keiji Enpuku, Y. Kuroki

Distortion of voltage versus flux (V–Φ) relation of a dc superconducting quantum interference device (SQUID) coupled to a multiturn input coil is studied. First, resonant behavior of the coupled SQUID due to the so-called input coil resonance is clarified. It is shown that large rf noise flux is produced by the input coil resonance. This rf flux is added to the SQUID, and results in large rf voltage across the SQUID. In the case where parasitic capacitance exists between the input coil and the ground of the SQUID, this rf voltage produces the rf flux again, i.e., a feedback loop for the rf flux is formed. Taking into account this capacitive feedback, we study the V–Φ relation of the coupled SQUID. Numerical simulation shows that the V–Φ relation is distorted considerably by the feedback mechanism. The simulation result explains well the experimental V–Φ relation of the coupled SQUID. The combination of the input coil resonance with the capacitive feedback is the most likely mechanism for the distorted V–Φ curve of the coupled SQUID. The condition for occurrence of the distorted V–Φ curve due to the capacitive feedback is also obtained, and methods to prevent degradation are discussed.

Journal of Applied Physics•Jul 1, 1997•15 citations
We investigate the dynamics of a superconducting rectifying circuit, namely, a three-junction superconducting quantum interference device (SQUID), where one arm of the superconducting loop consists of a nanomechanical resonator. We find that the dc characteristic curve of the system displays features that are directly related to the frequency and amplitude of the mechanical oscillations; these effects can be further enhanced by biasing the SQUID with an ac current. We discuss potential future developments of this idea in the field of ultrasensitive position detection, and assess their feasibility in current setups.
We present a study of the controllable nonlinear dynamics of a micromechanical beam coupled to a dc-SQUID (superconducting quantum interference device). The coupling between these systems places the modes of the beam in a highly nonlinear potential, whose shape can be altered by varying the bias current and applied flux of the SQUID. We detect the position of the beam by placing it in an optical cavity, which sets free the SQUID to be used solely for actuation. This enables us to probe the previously unexplored full parameter space of this device. We measure the frequency response of the beam and find that it displays a Duffing oscillator behavior which is periodic in the applied magnetic flux. To account for this, we develop a model based on the standard theory for SQUID dynamics. In addition, with the aim of understanding if the device can reach nonlinearity at the single phonon level, we use this model to show that the responsivity of the current circulating in the SQUID to the position of the beam can become divergent, with its magnitude limited only by noise. This suggests a direction for the generation of macroscopically distinguishable superposition states of the beam.
We study the dynamics of a Josephson parametric amplifier (JPA) coupled to a mechanical oscillator, as realized with a dc superconducting quantum interference device (SQUID) with an embedded movable arm. We analyze this system in the regime when the frequency of the mechanical oscillator is comparable in magnitude to the plasma oscillation of the SQUID. When the nanomechanical resonator is driven, it strongly affects the dynamics of the JPA. We show that this coupling can considerably modify the dynamics of the JPA and induce its multistability rather than common bistability. This analysis is relevant if one considers a JPA for detection of mechanical motion.
A low-noise coupled DC superconducting quantum interference device (SQUID) especially optimized for low frequency is discussed. Using large Josephson junctions and a low loop inductance the contribution of the critical current fluctuation to 1/f noise can be minimized. To minimize the inductance the Josephson junctions are placed in the center of the washer close to the SQUID loop. A scaled-up copper model of the SQUID and the signal coil is used to analyze the impedance of the SQUID loop affected by the signal coil. An equivalent circuit model describing the effective inductance of the SQUID loop as a function of the frequency is used to design appropriate damping of the resonances. The DC SQUID characteristics are smooth and the noise performance of the SQUID does not markedly suffer from resonances. The contribution of the 1/f noise at 1 Hz is found to be about 5*10/sup -7/ Phi /sub 0// square root Hz.>
We have measured the backaction of a dc superconducting quantum interference device (SQUID) position detector on an integrated 1 MHz flexural resonator. The frequency and quality factor of the micromechanical resonator can be tuned with bias current and applied magnetic flux. The backaction is caused by the Lorentz force due to the change in circulating current when the resonator displaces. The experimental features are reproduced by numerical calculations using the resistively and capacitively shunted junction model.
The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coherent photons or a superconducting device, coupled to the resonators motion. For nanotubes, however, this is a challenge due to their small size. Here, we couple a carbon nanoelectromechanical (NEMS) device to a superconducting circuit. Suspended carbon nanotubes act as both superconducting junctions and moving elements in a Superconducting Quantum Interference Device (SQUID). We observe a strong modulation of the flux through the SQUID from displacements of the nanotube. Incorporating this SQUID into superconducting resonators and qubits should enable the detection and manipulation of nanotube mechanical quantum states at the single-phonon level.
Distortion of voltage versus flux (V–Φ) relation of a dc superconducting quantum interference device (SQUID) coupled to a multiturn input coil is studied. First, resonant behavior of the coupled SQUID due to the so-called input coil resonance is clarified. It is shown that large rf noise flux is produced by the input coil resonance. This rf flux is added to the SQUID, and results in large rf voltage across the SQUID. In the case where parasitic capacitance exists between the input coil and the ground of the SQUID, this rf voltage produces the rf flux again, i.e., a feedback loop for the rf flux is formed. Taking into account this capacitive feedback, we study the V–Φ relation of the coupled SQUID. Numerical simulation shows that the V–Φ relation is distorted considerably by the feedback mechanism. The simulation result explains well the experimental V–Φ relation of the coupled SQUID. The combination of the input coil resonance with the capacitive feedback is the most likely mechanism for the distorted V–Φ curve of the coupled SQUID. The condition for occurrence of the distorted V–Φ curve due to the capacitive feedback is also obtained, and methods to prevent degradation are discussed.