Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0812.3905 · Physical Review B

Vertical distribution of nitrogen-vacancy centers in diamond formed by ion implantation and annealing

Charles Santori, Paul E. Barclay, Kai‐Mei C. Fu, Raymond G. Beausoleil

Published Mar 16, 2009• 141 citations
arXivHTMLPDF

Abstract

Etching experiments were performed that reveal the vertical distribution of optically active nitrogen-vacancy (NV) centers in diamond created in close proximity to a surface through ion implantation and annealing. The NV distribution depends strongly on the native nitrogen concentration, and spectral measurements of the neutral and negatively charged NV peaks give evidence for electron depletion effects in lower-nitrogen material. The results are important for potential quantum information and magnetometer devices where NV centers must be created in close proximity to a surface for coupling to optical structures.

DOI
10.1103/physrevb.79.125313

Related papers

Structures in diamond for optical manipulation of nitrogen-vacancy centers

Charles Santori, Kai‐Mei C. Fu, Paul E. Barclay +1 more

We describe research on new optical structures in diamond for quantum information and sensing applications based on the nitrogen-vacancy (NV) center. Results include etching experiments that reveal the vertical distribution of NV centers produced by ion implantation and annealing, and gallium phosphide waveguides fabricated on diamond with evanescent coupling to NV centers close to the diamond surface.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Dec 29, 2008•0 citations

Engineering of nitrogen-vacancy color centers in high purity diamond by ion implantation and annealing

Julius O. Orwa, Charles Santori, Kai‐Mei C. Fu +11 more

The negatively-charged nitrogen-vacancy (NV) center is the most studied optical center in diamond and is very important for applications in quantum information science. Many proposals for integrating NV centers in quantum and sensing applications rely on their tailored fabrication in ultra pure host material. In this study, we use ion implantation to controllably introduce nitrogen into high purity, low nitrogen chemical vapor deposition diamond samples. The properties of the resulting NV centers are studied as a function of implantation temperature, annealing temperature, and implantation fluence. We compare the implanted NV centers with native NV centers present deep in the bulk of the as-grown samples. The results for implanted NV centers are promising but indicate, at this stage, that the deep native NV centers possess overall superior optical properties. In particular, the implanted NV centers obtained after annealing at 2000 °C under a stabilizing pressure of 8 GPa showed an ensemble linewidth of 0.17 nm compared to 0.61 nm after annealing at 1000 °C. Over the same temperature range, the ensemble NV−/NV0 ratio increased by a factor of ∼5, although this was accompanied by an overall decrease in the NV count.

Journal of Applied Physics•Apr 15, 2011•126 citations

Diamond nitrogen-vacancy centers created by scanning focused helium ion beam and annealing

Zhihong Huang, W.-D. Li, Charles Santori +7 more

We demonstrate a method to create nitrogen-vacancy (NV) centers in diamond using focused helium ion microscopy. Near-surface NV centers can be created with spatial resolution below 0.6 μm. We studied the density, creation efficiency, and spectral linewidths at optical and microwave frequencies for NV centers produced using various helium ion implantation doses. The optical linewidths are narrower than those of similar nitrogen-vacancy centers produced using nitrogen ion implantation.

Applied Physics Letters•Aug 19, 2013•65 citations

Nitrogen ion implantation for controlled nitrogen-vacancy center creation in single- and polycrystalline diamond

Zeeshan Rashid, Nemanja Markešević, S. Lagomarsino +11 more

Precise control over the spatial distribution and charge state of nitrogen-vacancy (NV) centers in diamond is a key requirement for further advancing this platform in quantum sensing and photonic applications. Here, we investigate nitrogen ion implantation as a scalable method to engineer NV centers in bulk single-crystalline (SC) and a 5 μ m -thick polycrystalline (PC) diamond membrane. Nitrogen-doped regions (1–80 ppm) were fabricated using a 0.7 MeV ion beam and high-temperature annealing, with NV center formation verified by confocal fluorescence imaging and spectral analysis. In SC bulk diamond, we estimate the NV concentration from spectral analysis and model the fluorescence response as a function of implantation dose, capturing both the initial increase at low concentrations and a saturation behavior at higher doses due to quenching mechanisms. In contrast, PC diamond membranes show a weaker dependence at low implantation fluences, consistent with pre-existing nitrogen impurities, thus making a statistical model significantly more complex. The activation yield is found to be of order of 1%, which is lower than in N-rich diamond samples, as implanted N is predominantly interstitial. Photoluminescence spectroscopy indicates that NV 0 is the dominant charge state in both materials, with a laser-power-dependent redistribution between neutral and negative charge states. Optically detected magnetic resonance (ODMR) measurements in SC bulk diamond resolve the hyperfine structure and allow extraction of the dephasing time ( T 2 ∗ ), while in PC diamond membranes, where NV centers tend do form near the grain boundaries, the ODMR signals are observed but spectral resolution is currently limited by impurities, grain-dependent NV orientations, and photoluminescence background.

Diamond and Related Materials•Sep 12, 2026•0 citations

Optical coherence of diamond nitrogen-vacancy centers formed by ion implantation and annealing

Suzanne B. van Dam, Michael E. Walsh, Maarten J. Degen +8 more

Nitrogen-vacancy (NV) centers in diamond with coherent optical transitions are a promising candidate for quantum science and technology protocols. A widely used strategy for their creation is nitrogen-ion implantation and high-temperature annealing. The data presented in this work show that while low-strain, narrow-optical-linewidth NV centers are formed from naturally occurring ${}^{14}$N atoms, NV centers formed from the implanted ${}^{15}$N atoms show broadened optical transitions and experience higher strain. These results have immediate implications for the positioning accuracy of current NV center creation protocols.

arXiv:1812.11523•Physical review. B./Physical review. B•Apr 19, 2019•132 citations

Impact of surface and laser-induced noise on the spectral stability of implanted nitrogen-vacancy centers in diamond

Srivatsa Chakravarthi, Christian Pederson, Zeeshawn Kazi +2 more

Scalable realizations of quantum network technologies utilizing the nitrogen-vacancy (NV) center in diamond require creation of optically coherent NV centers in close proximity to a surface for coupling to optical structures. We create single NV centers by $^{15}\mathrm{N}$ ion implantation and high-temperature vacuum annealing. The origin of the NV centers is established by optically detected magnetic resonance spectroscopy for nitrogen isotope identification. Near-lifetime-limited optical linewidths $(<60 \mathrm{MHz})$ are observed for the majority of the normal-implant (${7}^{\ensuremath{\circ}}$, $\ensuremath{\approx}100$ nm deep) $^{15}\mathrm{NV}$ centers. Long-term stability of the ${\mathrm{NV}}^{\ensuremath{-}}$ charge state and emission frequency is demonstrated. The effect of NV-surface interaction is investigated by varying the implantation angle for a fixed ion energy, and thus lattice damage profile. In contrast to the normal-implant condition, NVs from an oblique implant (${85}^{\ensuremath{\circ}}$, $\ensuremath{\approx}20$ nm deep) exhibit substantially reduced optical coherence. Our results imply that the surface is a larger source of perturbation than implantation damage for shallow implanted NVs. This work supports the viability of ion implantation for formation of optically stable NV centers. However, careful surface preparation will be necessary for scalable defect engineering.

arXiv:2105.09483•Physical review. B./Physical review. B•Aug 24, 2021•33 citations
Etching experiments were performed that reveal the vertical distribution of optically active nitrogen-vacancy (NV) centers in diamond created in close proximity to a surface through ion implantation and annealing. The NV distribution depends strongly on the native nitrogen concentration, and spectral measurements of the neutral and negatively charged NV peaks give evidence for electron depletion effects in lower-nitrogen material. The results are important for potential quantum information and magnetometer devices where NV centers must be created in close proximity to a surface for coupling to optical structures.
The negatively-charged nitrogen-vacancy (NV) center is the most studied optical center in diamond and is very important for applications in quantum information science. Many proposals for integrating NV centers in quantum and sensing applications rely on their tailored fabrication in ultra pure host material. In this study, we use ion implantation to controllably introduce nitrogen into high purity, low nitrogen chemical vapor deposition diamond samples. The properties of the resulting NV centers are studied as a function of implantation temperature, annealing temperature, and implantation fluence. We compare the implanted NV centers with native NV centers present deep in the bulk of the as-grown samples. The results for implanted NV centers are promising but indicate, at this stage, that the deep native NV centers possess overall superior optical properties. In particular, the implanted NV centers obtained after annealing at 2000 °C under a stabilizing pressure of 8 GPa showed an ensemble linewidth of 0.17 nm compared to 0.61 nm after annealing at 1000 °C. Over the same temperature range, the ensemble NV−/NV0 ratio increased by a factor of ∼5, although this was accompanied by an overall decrease in the NV count.
Precise control over the spatial distribution and charge state of nitrogen-vacancy (NV) centers in diamond is a key requirement for further advancing this platform in quantum sensing and photonic applications. Here, we investigate nitrogen ion implantation as a scalable method to engineer NV centers in bulk single-crystalline (SC) and a 5 μ m -thick polycrystalline (PC) diamond membrane. Nitrogen-doped regions (1–80 ppm) were fabricated using a 0.7 MeV ion beam and high-temperature annealing, with NV center formation verified by confocal fluorescence imaging and spectral analysis. In SC bulk diamond, we estimate the NV concentration from spectral analysis and model the fluorescence response as a function of implantation dose, capturing both the initial increase at low concentrations and a saturation behavior at higher doses due to quenching mechanisms. In contrast, PC diamond membranes show a weaker dependence at low implantation fluences, consistent with pre-existing nitrogen impurities, thus making a statistical model significantly more complex. The activation yield is found to be of order of 1%, which is lower than in N-rich diamond samples, as implanted N is predominantly interstitial. Photoluminescence spectroscopy indicates that NV 0 is the dominant charge state in both materials, with a laser-power-dependent redistribution between neutral and negative charge states. Optically detected magnetic resonance (ODMR) measurements in SC bulk diamond resolve the hyperfine structure and allow extraction of the dephasing time ( T 2 ∗ ), while in PC diamond membranes, where NV centers tend do form near the grain boundaries, the ODMR signals are observed but spectral resolution is currently limited by impurities, grain-dependent NV orientations, and photoluminescence background.
Nitrogen-vacancy (NV) centers in diamond with coherent optical transitions are a promising candidate for quantum science and technology protocols. A widely used strategy for their creation is nitrogen-ion implantation and high-temperature annealing. The data presented in this work show that while low-strain, narrow-optical-linewidth NV centers are formed from naturally occurring 14{}^{14}14N atoms, NV centers formed from the implanted 15{}^{15}15N atoms show broadened optical transitions and experience higher strain. These results have immediate implications for the positioning accuracy of current NV center creation protocols.
Scalable realizations of quantum network technologies utilizing the nitrogen-vacancy (NV) center in diamond require creation of optically coherent NV centers in close proximity to a surface for coupling to optical structures. We create single NV centers by 15N^{15}\mathrm{N}15N ion implantation and high-temperature vacuum annealing. The origin of the NV centers is established by optically detected magnetic resonance spectroscopy for nitrogen isotope identification. Near-lifetime-limited optical linewidths (<60MHz)(<60 \mathrm{MHz})(<60MHz) are observed for the majority of the normal-implant (${7}^{\ensuremath{\circ}}$, $\ensuremath{\approx}100$ nm deep) 15NV^{15}\mathrm{NV}15NV centers. Long-term stability of the ${\mathrm{NV}}^{\ensuremath{-}}$ charge state and emission frequency is demonstrated. The effect of NV-surface interaction is investigated by varying the implantation angle for a fixed ion energy, and thus lattice damage profile. In contrast to the normal-implant condition, NVs from an oblique implant (${85}^{\ensuremath{\circ}}$, $\ensuremath{\approx}20$ nm deep) exhibit substantially reduced optical coherence. Our results imply that the surface is a larger source of perturbation than implantation damage for shallow implanted NVs. This work supports the viability of ion implantation for formation of optically stable NV centers. However, careful surface preparation will be necessary for scalable defect engineering.