Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0811.2422 · Applied Physics Letters

Individual addressing of ions using magnetic field gradients in a surface-electrode ion trap

Shannon X. Wang, Jaroslaw Labaziewicz, Yufei Ge, Ruth Shewmon, Isaac L. Chuang

Published Mar 2, 2009• 66 citations
arXivHTMLPDF

Abstract

A dense array of ions in microfabricated traps represents one possible way to scale up ion trap quantum computing. The ability to address individual ions is an important component of such a scheme. We demonstrate individual addressing of trapped ions in a microfabricated surface-electrode trap using a magnetic field gradient generated on-chip. A frequency splitting of 310(2) kHz for two ions separated by 5 μm is achieved. Selective single qubit operations are performed on one of two trapped ions with an average of 2.2(±1.0%) crosstalk. Coherence time is reduced by the magnetic field gradient, but the spin-echo technique effectively restores the coherence time.

DOI
10.1063/1.3095520

Related papers

Individual-Ion Addressing with Microwave Field Gradients

Ulrich Warring, C. Ospelkaus, Yves Colombe +3 more

Individual-qubit addressing is a prerequisite for many instances of quantum information processing. We demonstrate this capability on trapped-ion qubits with microwave near fields delivered by electrode structures integrated into a microfabricated surface-electrode trap. We describe four approaches that may be used in quantum information experiments with hyperfine levels as qubits. We implement individual control on two 25Mg+ ions separated by 4.3 μm and find spin-flip crosstalk errors on the order of 10(-3).

arXiv:1210.6407•Physical Review Letters•Apr 22, 2013•66 citations

Near-field microwave addressing of trapped-ion qubits for scalable quantum computation

Diana Prado Lopes Aude Craik

This thesis reports high-fidelity near-field spatial microwave addressing of long-lived 43Ca+ "atomic clock" qubits performed in a two-zone single-layer surface-electrode ion trap. Addressing is implemented by using two of the trap's integrated microwave electrodes, one in each zone, to drive single-qubit rotations in the zone we choose to address whilst interferometrically cancelling the microwave field at the neighbour (non-addressed) zone. Using this field-nulling scheme, we measure a Rabi frequency ratio between addressed and non-addressed zones of up to 1400, from which we calculate an addressing error (or a spin-flip probability on the qubit transition) of 1e-6. Off-resonant excitation out of the qubit state is a more significant source of error in this experiment, but we also demonstrate polarisation control of the microwave field at an error level of 2e-5, which, if combined with individual-ion addressing, would be sufficient to suppress off-resonant excitation errors to the 1e-9 level. Further, this thesis presents preliminary results obtained with a micron-scale coupled-microstrip differential antenna probe that can be scanned over an ion-trap chip to map microwave magnetic near fields. The probe is designed to enable the measurement of fields at tens of microns above electrode surfaces and to act as an effective characterisation tool, speeding up design-fabrication-characterisation cycles in the production of new prototype microwave ion-trap chips. Finally, a new multi-layer design for an ion-trap chip which displays, in simulations, a 100-fold improvement in addressing performance, is presented. The chip electrode structure is designed to use the cancelling effect of microwave return currents to produce Rabi frequency ratios of order 1000 between trap zones using a single microwave electrode (i.e. without the need for nulling fields). If realised, this chip could be used to drive individually addressed single-qubit operations on arrays of memory qubits in parallel and with high fidelity.

•Jan 1, 2016•1 citation

Surface-electrode ion traps for scalable quantum computing

D. T. C. Allcock

The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.

•Jan 1, 2011•6 citations

High Fidelity Single Qubit Manipulation in a Microfabricated Ion Trap

Emily Mount

The trapped atomic ion qubits feature desirable properties for use in a quantum computer such as long coherence times, high qubit readout fidelity, and universal logic gates. While these essential properties have been demonstrated, the ability to scale a trapped ion quantum system has not yet been shown. The challenge of scaling the system calls for methods to realize high-fidelity logic gates in scalable trap structures. Surface electrode ion traps, that are microfabricated from a silicon substrate, provide a scalable platform for trapping ion qubits only if high-fidelity operations are achievable in these structures. Here, we present a system for trapping and manipulating ions in a scalable surface trap. Trapping times exceeding 20 minutes without laser cooling, and heating rates as low as 0.8 quanta/ms indicate stable trapping conditions in these microtraps. Coherence times of more than one second verify adequate qubit and control field stability. We demonstrate low-error single-qubit gates performed using stimulated Raman transitions driven by lasers that are tightly focused on the ion qubit. Digital feedback loops are implemented to control the driving field's amplitude and frequency. Gate errors are measured using a randomized benchmarking protocol for single qubit gates, where residual amplitude error in the control beam is compensated using various pulse sequence techniques. Using pulse compensation, we demonstrate single qubit gates with an average error per randomized Clifford group gate of $3.6(3)\\times10^{-4}$, which is below the fault-tolerant threshold for some error-correction schemes.

•Jan 1, 2015•0 citations

Characterization of Microfabricated Surface Ion Traps.

Craig Hogle

Current classical computing methods are unable to simulate quantum many-body interactions efficiently.Analog quantum simulators with even small numbers of quantum degrees of freedom are expected to enable the investigation of systems not fully accessible in traditional computing such as condensed-matter systems, quantum chemistry, and material science.Two-dimensional lattices of trapped ions are a good candidate to realize an analog quantum simulator for their addressability, individual control and individual detection.Here, we report on multiple unique lattice surface ion trap designs, microfabricated at Sandia National Laboratories, capable of trapping and interacting up to 4 ions.Ions are held in close proximity in individual all radio-frequency potential minima and interact via their Coulomb repulsion.The Coulomb coupling between ions allows for simulation of spin-spin interactions 1-6 .Control electrodes of the trap can be used to adjust principal axes of the ion's motion and thus enable individual control over the interaction between ions.The lattice trap array architecture tested in this work can be scaled to larger two-dimensional lattices of trapped ions.

•Jul 4, 2018•0 citations

Entanglement on a surface chip using scalable control technologies for trapped ion qubits

Daisy Smith (9231587)

A blueprint for a scalable quantum computer using microwave radiation and a lattice of microfabricated surface ion traps was first proposed by Lekitsch et al. [1] in 2017. These surface ion traps require an integrated current-carrying wire layer which produces a variable magnetic field gradient at the position of the ions. Such a surface trap was first presented by Siegele et al. [2] in 2022. This thesis outlines the first use-case of this trap, demonstrating single-qubit control and characterization using long-wavelength radiation, and discusses the use of an Arbitrary Waveform Generator as a more scalable method for this qubit control. The thesis then characterizes the current-carrying wires, using the hyperfine states of 171Yb+ to demonstrate a variable and controllable gradient. In a magnetic field gradient, the use of a dressed state can greatly increase the coherence time of qubits, as presented by [3], the dressed state is created on this surface trap for the first time. Finally maximal entanglement of spin and motion, as proposed by Mintert and Wunderlich in [4], is shown in a single ion using long-wavelength radiation and using the current-carrying wires to produce the gradient.

•Apr 23, 2025•0 citations
A dense array of ions in microfabricated traps represents one possible way to scale up ion trap quantum computing. The ability to address individual ions is an important component of such a scheme. We demonstrate individual addressing of trapped ions in a microfabricated surface-electrode trap using a magnetic field gradient generated on-chip. A frequency splitting of 310(2) kHz for two ions separated by 5 μm is achieved. Selective single qubit operations are performed on one of two trapped ions with an average of 2.2(±1.0%) crosstalk. Coherence time is reduced by the magnetic field gradient, but the spin-echo technique effectively restores the coherence time.
Individual-qubit addressing is a prerequisite for many instances of quantum information processing. We demonstrate this capability on trapped-ion qubits with microwave near fields delivered by electrode structures integrated into a microfabricated surface-electrode trap. We describe four approaches that may be used in quantum information experiments with hyperfine levels as qubits. We implement individual control on two 25Mg+ ions separated by 4.3 μm and find spin-flip crosstalk errors on the order of 10(-3).
This thesis reports high-fidelity near-field spatial microwave addressing of long-lived 43Ca+ "atomic clock" qubits performed in a two-zone single-layer surface-electrode ion trap. Addressing is implemented by using two of the trap's integrated microwave electrodes, one in each zone, to drive single-qubit rotations in the zone we choose to address whilst interferometrically cancelling the microwave field at the neighbour (non-addressed) zone. Using this field-nulling scheme, we measure a Rabi frequency ratio between addressed and non-addressed zones of up to 1400, from which we calculate an addressing error (or a spin-flip probability on the qubit transition) of 1e-6. Off-resonant excitation out of the qubit state is a more significant source of error in this experiment, but we also demonstrate polarisation control of the microwave field at an error level of 2e-5, which, if combined with individual-ion addressing, would be sufficient to suppress off-resonant excitation errors to the 1e-9 level. Further, this thesis presents preliminary results obtained with a micron-scale coupled-microstrip differential antenna probe that can be scanned over an ion-trap chip to map microwave magnetic near fields. The probe is designed to enable the measurement of fields at tens of microns above electrode surfaces and to act as an effective characterisation tool, speeding up design-fabrication-characterisation cycles in the production of new prototype microwave ion-trap chips. Finally, a new multi-layer design for an ion-trap chip which displays, in simulations, a 100-fold improvement in addressing performance, is presented. The chip electrode structure is designed to use the cancelling effect of microwave return currents to produce Rabi frequency ratios of order 1000 between trap zones using a single microwave electrode (i.e. without the need for nulling fields). If realised, this chip could be used to drive individually addressed single-qubit operations on arrays of memory qubits in parallel and with high fidelity.
The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.
The trapped atomic ion qubits feature desirable properties for use in a quantum computer such as long coherence times, high qubit readout fidelity, and universal logic gates. While these essential properties have been demonstrated, the ability to scale a trapped ion quantum system has not yet been shown. The challenge of scaling the system calls for methods to realize high-fidelity logic gates in scalable trap structures. Surface electrode ion traps, that are microfabricated from a silicon substrate, provide a scalable platform for trapping ion qubits only if high-fidelity operations are achievable in these structures. Here, we present a system for trapping and manipulating ions in a scalable surface trap. Trapping times exceeding 20 minutes without laser cooling, and heating rates as low as 0.8 quanta/ms indicate stable trapping conditions in these microtraps. Coherence times of more than one second verify adequate qubit and control field stability. We demonstrate low-error single-qubit gates performed using stimulated Raman transitions driven by lasers that are tightly focused on the ion qubit. Digital feedback loops are implemented to control the driving field's amplitude and frequency. Gate errors are measured using a randomized benchmarking protocol for single qubit gates, where residual amplitude error in the control beam is compensated using various pulse sequence techniques. Using pulse compensation, we demonstrate single qubit gates with an average error per randomized Clifford group gate of 3.6(3)times10−43.6(3)\\times10^{-4}3.6(3)times10−4, which is below the fault-tolerant threshold for some error-correction schemes.
Current classical computing methods are unable to simulate quantum many-body interactions efficiently.Analog quantum simulators with even small numbers of quantum degrees of freedom are expected to enable the investigation of systems not fully accessible in traditional computing such as condensed-matter systems, quantum chemistry, and material science.Two-dimensional lattices of trapped ions are a good candidate to realize an analog quantum simulator for their addressability, individual control and individual detection.Here, we report on multiple unique lattice surface ion trap designs, microfabricated at Sandia National Laboratories, capable of trapping and interacting up to 4 ions.Ions are held in close proximity in individual all radio-frequency potential minima and interact via their Coulomb repulsion.The Coulomb coupling between ions allows for simulation of spin-spin interactions 1-6 .Control electrodes of the trap can be used to adjust principal axes of the ion's motion and thus enable individual control over the interaction between ions.The lattice trap array architecture tested in this work can be scaled to larger two-dimensional lattices of trapped ions.
A blueprint for a scalable quantum computer using microwave radiation and a lattice of microfabricated surface ion traps was first proposed by Lekitsch et al. [1] in 2017. These surface ion traps require an integrated current-carrying wire layer which produces a variable magnetic field gradient at the position of the ions. Such a surface trap was first presented by Siegele et al. [2] in 2022. This thesis outlines the first use-case of this trap, demonstrating single-qubit control and characterization using long-wavelength radiation, and discusses the use of an Arbitrary Waveform Generator as a more scalable method for this qubit control. The thesis then characterizes the current-carrying wires, using the hyperfine states of 171Yb+ to demonstrate a variable and controllable gradient. In a magnetic field gradient, the use of a dressed state can greatly increase the coherence time of qubits, as presented by [3], the dressed state is created on this surface trap for the first time. Finally maximal entanglement of spin and motion, as proposed by Mintert and Wunderlich in [4], is shown in a single ion using long-wavelength radiation and using the current-carrying wires to produce the gradient.