Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0712.2475 · The Journal of Chemical Physics

Orbital optimization in the density matrix renormalization group, with applications to polyenes and β-carotene

Debashree Ghosh, Johannes Hachmann, Takeshi Yanai, Garnet Kin‐Lic Chan

Published Apr 11, 2008• 344 citations
arXivHTMLPDF

Abstract

In previous work we have shown that the density matrix renormalization group (DMRG) enables near-exact calculations in active spaces much larger than are possible with traditional complete active space algorithms. Here, we implement orbital optimization with the DMRG to further allow the self-consistent improvement of the active orbitals, as is done in the complete active space self-consistent field (CASSCF) method. We use our resulting DMRG-CASSCF method to study the low-lying excited states of the all-trans polyenes up to C24H26 as well as beta-carotene, correlating with near-exact accuracy the optimized complete pi-valence space with up to 24 active electrons and orbitals, and analyze our results in the light of the recent discovery from resonance Raman experiments of new optically dark states in the spectrum.

DOI
10.1063/1.2883976

Related papers

The density matrix renormalization group self-consistent field method: Orbital optimization with the density matrix renormalization group method in the active space

Dominika Zgid, Marcel Nooijen

We present the density matrix renormalization group self-consistent field (DMRG-SCF) approach that is analogous to the complete active space self-consisted field (CASSCF) method but instead of using for the description of the active space the full configuration interaction (FCI) method, the DMRG-SCF uses the density matrix renormalization group (DMRG) method. The DMRG-SCF approach, similarly to CASSCF, properly describes the multiconfigurational character of the wave function but avoids the exponential scaling of the FCI method and replaces it with a polynomial scaling. Hence, calculations for a larger number of orbitals and electrons in the active space are possible since the DMRG method provides an efficient tool to automatically select from the full Hilbert space the many-body contracted basis states that are the most important for the description of the wave function.

The Journal of Chemical Physics•Apr 11, 2008•203 citations

Accelerated One-Step Density Matrix Renormalization Group Self-Consistent Field Method

Ji-Feng Yang

CASSCF (Complete Active Space Self-Consistent Field) computes the exact FCI (Full-Configuration Interaction) wavefunction for valence electrons within a user-designated active space, and becomes a standard multi-reference method for computing non-dynamic electronic correlations of strongly correlated molecule. DMRG (Density Matrix Renormalization Group)-based CASSCF (DMRGSCF) allows to treat a large active space which is beyond the limit of conventional CASSCF. However, all reported DMRGSCF methods in literature are based on the two-step optimization in which molecular orbitals (MOs) and CI wavefunction parameters are optimized separately. Apparently the caveat in any two-step procedure is that when orbitals and wavefunction are strongly coupled, or an active space is not wisely chosen, it leads to a rather slow iterative convergence and sometimes even a serious divergence problem. In this talk, I will present our recent progress in developing a one-step DMRGSCF procedure in which the second-order optimization is carried out for both MOs and wavefunctions simultaneously. Our algorithm, implementation and numerical results will be discussed to demonstrate an accelerated convergence of otherwise challenging examples.

•Jan 1, 2017•0 citations

The Density Matrix Renormalization Group for Strong Correlation in Ground and Excited States

Leon Freitag, Markus Reiher

The density matrix renormalization group (DMRG), originally introduced by White in 1992 in solid state physics, has since found numerous applications in quantum chemistry. DMRG allows one to approximate the full CI wave function with polynomial scaling, making active spaces with about 100 orbitals accessible. Together with self-consistent field orbital optimization (DMRG-SCF), it allows for much larger active spaces than the complete active space self-consistent field (CASSCF) method. In this chapter, we provide an introduction to the theory behind DMRG, both in the original renormalization group formulation, as well as in the more modern formulation where wave functions and operators are represented as matrix product states and matrix product operators, respectively. We further discuss quantum-information-theoretical orbital entanglement measures that are accessible through DMRG, which pave the way to automated active space selection in multicongurational calculations, and factors that control DMRG convergence and accuracy. Finally, we review modern developments in and around DMRG, such as post-DMRG methods for the description of dynamic correlation and environment effects, tensor network states, as well as applications of DMRG and DMRG-SCF in quantum chemistry.

Wiley eBooks•Nov 23, 2020•27 citations

Density matrix renormalization group (DMRG) method as a common tool for large active-space CASSCF/CASPT2 calculations

Naoki Nakatani, Sheng Guo

This paper describes an interface between the density matrix renormalization group (DMRG) method and the complete active-space self-consistent field (CASSCF) method and its analytical gradient, as well as an extension to the second-order perturbation theory (CASPT2) method. This interfacing allows large active-space multi-reference computations to be easily performed. The interface and its extension are both implemented in terms of reduced density matrices (RDMs) which can be efficiently computed via the DMRG sweep algorithm. We also present benchmark results showing that, in practice, the DMRG-CASSCF calculations scale with active-space size in a polynomial manner in the case of quasi-1D systems. Geometry optimization of a binuclear iron-sulfur cluster using the DMRG-CASSCF analytical gradient is demonstrated, indicating that the inclusion of the valence p-orbitals of sulfur and double-shell d-orbitals of iron lead to non-negligible changes in the geometry compared to the results of small active-space calculations. With the exception of the selection of M values, many computational settings in these practical DMRG calculations have been tuned and black-boxed in our interface, and so the resulting DMRG-CASSCF and DMRG-CASPT2 calculations are now available to novice users as a common tool to compute strongly correlated electronic wavefunctions.

The Journal of Chemical Physics•Mar 1, 2017•92 citations

Density-matrix renormalization group algorithm with multi-level active space

Yingjin Ma, Jing Wen, Haibo Ma

The density-matrix renormalization group (DMRG) method, which can deal with a large active space composed of tens of orbitals, is nowadays widely used as an efficient addition to traditional complete active space (CAS)-based approaches. In this paper, we present the DMRG algorithm with a multi-level (ML) control of the active space based on chemical intuition-based hierarchical orbital ordering, which is called as ML-DMRG with its self-consistent field (SCF) variant ML-DMRG-SCF. Ground and excited state calculations of H2O, N2, indole, and Cr2 with comparisons to DMRG references using fixed number of kept states (M) illustrate that ML-type DMRG calculations can obtain noticeable efficiency gains. It is also shown that the orbital re-ordering based on hierarchical multiple active subspaces may be beneficial for reducing computational time for not only ML-DMRG calculations but also DMRG ones with fixed M values.

arXiv:1507.05264•The Journal of Chemical Physics•Jul 17, 2015•22 citations

Assessment of various natural orbitals as the basis of large active space density-matrix renormalization group calculations

Yingjin Ma, Haibo Ma

It is well-known that not only the orbital ordering but also the choice of the orbitals itself as the basis may significantly influence the computational efficiency of density-matrix renormalization group (DMRG) calculations. In this study, for assessing the efficiency of using various natural orbitals (NOs) as the DMRG basis, we performed benchmark DMRG calculations with different bases, which included the NOs obtained by various traditional electron correlation methods, as well as NOs acquired from preliminary moderate DMRG calculations (e.g., preserved states less than 500). The tested systems included N2, transition metal Cr2 systems, as well as 1D hydrogen polyradical chain systems under equilibrium and dissociation conditions and 2D hydrogen aggregates. The results indicate that a good compromise between the requirement for low computational costs of acquiring NOs and the demand for high efficiency of NOs as the basis of DMRG calculations may be very dependent on the studied systems' diverse electron correlation characteristics and the size of the active space. It is also shown that a DMRG-complete active space configuration interaction (DMRG-CASCI) calculation in a basis of carefully chosen NOs can provide a less expensive alternative to the standard DMRG-complete active space self-consistent field (DMRG-CASSCF) calculation and avoid the convergence difficulties of orbital optimization for large active spaces. The effect of different NO ordering schemes on DMRG-CASCI calculations is also discussed.

arXiv:1303.0616•The Journal of Chemical Physics•Jun 12, 2013•46 citations
In previous work we have shown that the density matrix renormalization group (DMRG) enables near-exact calculations in active spaces much larger than are possible with traditional complete active space algorithms. Here, we implement orbital optimization with the DMRG to further allow the self-consistent improvement of the active orbitals, as is done in the complete active space self-consistent field (CASSCF) method. We use our resulting DMRG-CASSCF method to study the low-lying excited states of the all-trans polyenes up to C24H26 as well as beta-carotene, correlating with near-exact accuracy the optimized complete pi-valence space with up to 24 active electrons and orbitals, and analyze our results in the light of the recent discovery from resonance Raman experiments of new optically dark states in the spectrum.
We present the density matrix renormalization group self-consistent field (DMRG-SCF) approach that is analogous to the complete active space self-consisted field (CASSCF) method but instead of using for the description of the active space the full configuration interaction (FCI) method, the DMRG-SCF uses the density matrix renormalization group (DMRG) method. The DMRG-SCF approach, similarly to CASSCF, properly describes the multiconfigurational character of the wave function but avoids the exponential scaling of the FCI method and replaces it with a polynomial scaling. Hence, calculations for a larger number of orbitals and electrons in the active space are possible since the DMRG method provides an efficient tool to automatically select from the full Hilbert space the many-body contracted basis states that are the most important for the description of the wave function.
CASSCF (Complete Active Space Self-Consistent Field) computes the exact FCI (Full-Configuration Interaction) wavefunction for valence electrons within a user-designated active space, and becomes a standard multi-reference method for computing non-dynamic electronic correlations of strongly correlated molecule. DMRG (Density Matrix Renormalization Group)-based CASSCF (DMRGSCF) allows to treat a large active space which is beyond the limit of conventional CASSCF. However, all reported DMRGSCF methods in literature are based on the two-step optimization in which molecular orbitals (MOs) and CI wavefunction parameters are optimized separately. Apparently the caveat in any two-step procedure is that when orbitals and wavefunction are strongly coupled, or an active space is not wisely chosen, it leads to a rather slow iterative convergence and sometimes even a serious divergence problem. In this talk, I will present our recent progress in developing a one-step DMRGSCF procedure in which the second-order optimization is carried out for both MOs and wavefunctions simultaneously. Our algorithm, implementation and numerical results will be discussed to demonstrate an accelerated convergence of otherwise challenging examples.
The density matrix renormalization group (DMRG), originally introduced by White in 1992 in solid state physics, has since found numerous applications in quantum chemistry. DMRG allows one to approximate the full CI wave function with polynomial scaling, making active spaces with about 100 orbitals accessible. Together with self-consistent field orbital optimization (DMRG-SCF), it allows for much larger active spaces than the complete active space self-consistent field (CASSCF) method. In this chapter, we provide an introduction to the theory behind DMRG, both in the original renormalization group formulation, as well as in the more modern formulation where wave functions and operators are represented as matrix product states and matrix product operators, respectively. We further discuss quantum-information-theoretical orbital entanglement measures that are accessible through DMRG, which pave the way to automated active space selection in multicongurational calculations, and factors that control DMRG convergence and accuracy. Finally, we review modern developments in and around DMRG, such as post-DMRG methods for the description of dynamic correlation and environment effects, tensor network states, as well as applications of DMRG and DMRG-SCF in quantum chemistry.
This paper describes an interface between the density matrix renormalization group (DMRG) method and the complete active-space self-consistent field (CASSCF) method and its analytical gradient, as well as an extension to the second-order perturbation theory (CASPT2) method. This interfacing allows large active-space multi-reference computations to be easily performed. The interface and its extension are both implemented in terms of reduced density matrices (RDMs) which can be efficiently computed via the DMRG sweep algorithm. We also present benchmark results showing that, in practice, the DMRG-CASSCF calculations scale with active-space size in a polynomial manner in the case of quasi-1D systems. Geometry optimization of a binuclear iron-sulfur cluster using the DMRG-CASSCF analytical gradient is demonstrated, indicating that the inclusion of the valence p-orbitals of sulfur and double-shell d-orbitals of iron lead to non-negligible changes in the geometry compared to the results of small active-space calculations. With the exception of the selection of M values, many computational settings in these practical DMRG calculations have been tuned and black-boxed in our interface, and so the resulting DMRG-CASSCF and DMRG-CASPT2 calculations are now available to novice users as a common tool to compute strongly correlated electronic wavefunctions.
The density-matrix renormalization group (DMRG) method, which can deal with a large active space composed of tens of orbitals, is nowadays widely used as an efficient addition to traditional complete active space (CAS)-based approaches. In this paper, we present the DMRG algorithm with a multi-level (ML) control of the active space based on chemical intuition-based hierarchical orbital ordering, which is called as ML-DMRG with its self-consistent field (SCF) variant ML-DMRG-SCF. Ground and excited state calculations of H2O, N2, indole, and Cr2 with comparisons to DMRG references using fixed number of kept states (M) illustrate that ML-type DMRG calculations can obtain noticeable efficiency gains. It is also shown that the orbital re-ordering based on hierarchical multiple active subspaces may be beneficial for reducing computational time for not only ML-DMRG calculations but also DMRG ones with fixed M values.
It is well-known that not only the orbital ordering but also the choice of the orbitals itself as the basis may significantly influence the computational efficiency of density-matrix renormalization group (DMRG) calculations. In this study, for assessing the efficiency of using various natural orbitals (NOs) as the DMRG basis, we performed benchmark DMRG calculations with different bases, which included the NOs obtained by various traditional electron correlation methods, as well as NOs acquired from preliminary moderate DMRG calculations (e.g., preserved states less than 500). The tested systems included N2, transition metal Cr2 systems, as well as 1D hydrogen polyradical chain systems under equilibrium and dissociation conditions and 2D hydrogen aggregates. The results indicate that a good compromise between the requirement for low computational costs of acquiring NOs and the demand for high efficiency of NOs as the basis of DMRG calculations may be very dependent on the studied systems' diverse electron correlation characteristics and the size of the active space. It is also shown that a DMRG-complete active space configuration interaction (DMRG-CASCI) calculation in a basis of carefully chosen NOs can provide a less expensive alternative to the standard DMRG-complete active space self-consistent field (DMRG-CASSCF) calculation and avoid the convergence difficulties of orbital optimization for large active spaces. The effect of different NO ordering schemes on DMRG-CASCI calculations is also discussed.