The density-matrix renormalization group (DMRG) method, which can deal with a large active space composed of tens of orbitals, is nowadays widely used as an efficient addition to traditional complete active space (CAS)-based approaches. In this paper, we present the DMRG algorithm with a multi-level (ML) control of the active space based on chemical intuition-based hierarchical orbital ordering, which is called as ML-DMRG with its self-consistent field (SCF) variant ML-DMRG-SCF. Ground and excited state calculations of H2O, N2, indole, and Cr2 with comparisons to DMRG references using fixed number of kept states (M) illustrate that ML-type DMRG calculations can obtain noticeable efficiency gains. It is also shown that the orbital re-ordering based on hierarchical multiple active subspaces may be beneficial for reducing computational time for not only ML-DMRG calculations but also DMRG ones with fixed M values.
The density-matrix renormalization group (DMRG) method, which can deal with a large active space composed of tens of orbitals, is nowadays widely used as an efficient addition to traditional complete active space (CAS)-based approaches. In this paper, we present the DMRG algorithm with a multi-level (ML) control of the active space based on chemical intuition-based hierarchical orbital ordering, which is called as ML-DMRG with its self-consistent field (SCF) variant ML-DMRG-SCF. Ground and excited state calculations of H2O, N2, indole, and Cr2 with comparisons to DMRG references using fixed number of kept states (M) illustrate that ML-type DMRG calculations can obtain noticeable efficiency gains. It is also shown that the orbital re-ordering based on hierarchical multiple active subspaces may be beneficial for reducing computational time for not only ML-DMRG calculations but also DMRG ones with fixed M values.
We present the density matrix renormalization group self-consistent field (DMRG-SCF) approach that is analogous to the complete active space self-consisted field (CASSCF) method but instead of using for the description of the active space the full configuration interaction (FCI) method, the DMRG-SCF uses the density matrix renormalization group (DMRG) method. The DMRG-SCF approach, similarly to CASSCF, properly describes the multiconfigurational character of the wave function but avoids the exponential scaling of the FCI method and replaces it with a polynomial scaling. Hence, calculations for a larger number of orbitals and electrons in the active space are possible since the DMRG method provides an efficient tool to automatically select from the full Hilbert space the many-body contracted basis states that are the most important for the description of the wave function.
The density matrix renormalization group (DMRG), originally introduced by White in 1992 in solid state physics, has since found numerous applications in quantum chemistry. DMRG allows one to approximate the full CI wave function with polynomial scaling, making active spaces with about 100 orbitals accessible. Together with self-consistent field orbital optimization (DMRG-SCF), it allows for much larger active spaces than the complete active space self-consistent field (CASSCF) method. In this chapter, we provide an introduction to the theory behind DMRG, both in the original renormalization group formulation, as well as in the more modern formulation where wave functions and operators are represented as matrix product states and matrix product operators, respectively. We further discuss quantum-information-theoretical orbital entanglement measures that are accessible through DMRG, which pave the way to automated active space selection in multicongurational calculations, and factors that control DMRG convergence and accuracy. Finally, we review modern developments in and around DMRG, such as post-DMRG methods for the description of dynamic correlation and environment effects, tensor network states, as well as applications of DMRG and DMRG-SCF in quantum chemistry.
Despite the success of modern quantum chemistry in predicting properties of organic molecules, the treatment of inorganic systems, which have many close lying states, remains out of quantitative reach for current methods. To treat non-dynamic correlation, we take advantage of the density matrix renormalization group (DMRG) method that has become very successful in the field of solid state physics. We present a detailed study of the DMRG method, and we pay special attention to the evolution of the understanding behind the mathematical structure of the DMRG wave function. Our primary goal is to develop a density matrix renormalization group self--consistent--field (DMRG-SCF) approach, analogous to the complete active space self--consistent field (CASSCF) method, but dealing with large active spaces that are too demanding for the full configuration interaction (FCI) method. \nAs a first step towards such a DMRG-SCF procedure, we present a spin-adapted DMRG algorithm designed to target spin- and spatial-symmetry states that are hard to obtain while using an unrestricted algorithm. \nOur next step is a modification of the DMRG algorithm to obtain decreasing energy at every step during the sweep. This monotonically convergent DMRG scheme lets us obtain the two-body density matrix as a by--product of the existing procedure without any additional cost in storage. Additionally, the two-body density matrix produced at convergence using this scheme is free from the N-representability problem that is present when the two--body density matrix is produced with the two-site DMRG scheme without additional storage cost. Finally, taking advantage of the modifications developed herein, we present results obtained from our DMRG-SCF method. Lastly, we discuss possible ways of incorporating dynamical correlation into the DMRG scheme, in order to obtain a modern multireference approach.
It is well-known that not only the orbital ordering but also the choice of the orbitals itself as the basis may significantly influence the computational efficiency of density-matrix renormalization group (DMRG) calculations. In this study, for assessing the efficiency of using various natural orbitals (NOs) as the DMRG basis, we performed benchmark DMRG calculations with different bases, which included the NOs obtained by various traditional electron correlation methods, as well as NOs acquired from preliminary moderate DMRG calculations (e.g., preserved states less than 500). The tested systems included N2, transition metal Cr2 systems, as well as 1D hydrogen polyradical chain systems under equilibrium and dissociation conditions and 2D hydrogen aggregates. The results indicate that a good compromise between the requirement for low computational costs of acquiring NOs and the demand for high efficiency of NOs as the basis of DMRG calculations may be very dependent on the studied systems' diverse electron correlation characteristics and the size of the active space. It is also shown that a DMRG-complete active space configuration interaction (DMRG-CASCI) calculation in a basis of carefully chosen NOs can provide a less expensive alternative to the standard DMRG-complete active space self-consistent field (DMRG-CASSCF) calculation and avoid the convergence difficulties of orbital optimization for large active spaces. The effect of different NO ordering schemes on DMRG-CASCI calculations is also discussed.
This article presents an efficient and parallelized implementation of the density matrix renormalization group (DMRG) algorithm for quantum chemistry calculations. The DMRG method as a large-scale multireference electronic structure model is by nature particularly efficient for one-dimensionally correlated systems, while the present development is oriented toward applications for polynuclear transition metal compounds, in which the macroscopic one-dimensional structure of electron correlation is absent. A straightforward extension of the DMRG algorithm is proposed with further improvements and aggressive optimizations to allow its application with large multireference active space, which is often demanded for metal compound calculations. Special efficiency is achieved by making better use of sparsity and symmetry in the operator and wave function representations. By accomplishing computationally intensive DMRG calculations, the authors have found that a large number of renormalized basis states are required to represent high entanglement of the electron correlation for metal compound applications, and it is crucial to adopt auxiliary perturbative correction to the projected density matrix during the DMRG sweep optimization in order to attain proper convergence to the solution. Potential energy curve calculations for the Cr(2) molecule near the known equilibrium precisely predicted the full configuration interaction energies with a correlation space of 24 electrons in 30 orbitals [denoted by (24e,30o)]. The energies are demonstrated to be accurate to 0.6mE(h) (the error from the extrapolated best value) when as many as 10,000 renormalized basis states are employed for the left and right DMRG block representations. The relative energy curves for [Cu(2)O(2)](2+) along the isomerization coordinate were obtained from DMRG and other correlated calculations, for which a fairly large orbital space (32e,62o) is modeled as a full correlation space. The DMRG prediction nearly overlaps with the energy curve from the coupled cluster with singles, doubles, and perturbative triple [CCSD(T)] calculations, while the multireference complete active space self-consistent field (CASSCF) calculations with the small reference configuration (8e,8o) are found to overestimate the biradical character of the electronic state of [Cu(2)O(2)](2+) according to the one-electron density matrix analysis.
CASSCF (Complete Active Space Self-Consistent Field) computes the exact FCI (Full-Configuration Interaction) wavefunction for valence electrons within a user-designated active space, and becomes a standard multi-reference method for computing non-dynamic electronic correlations of strongly correlated molecule. DMRG (Density Matrix Renormalization Group)-based CASSCF (DMRGSCF) allows to treat a large active space which is beyond the limit of conventional CASSCF. However, all reported DMRGSCF methods in literature are based on the two-step optimization in which molecular orbitals (MOs) and CI wavefunction parameters are optimized separately. Apparently the caveat in any two-step procedure is that when orbitals and wavefunction are strongly coupled, or an active space is not wisely chosen, it leads to a rather slow iterative convergence and sometimes even a serious divergence problem. In this talk, I will present our recent progress in developing a one-step DMRGSCF procedure in which the second-order optimization is carried out for both MOs and wavefunctions simultaneously. Our algorithm, implementation and numerical results will be discussed to demonstrate an accelerated convergence of otherwise challenging examples.