Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0712.1587 · Physical Review A

Planar multipole ion trap

Markus Debatin, Michael Kroener, Jochen Mikosch, Sebastian H. Trippel, Nathan Morrison, M. Reetz‐Lamour, Peter Woias, Roland Wester, Matthias Weidemüller

Published Mar 27, 2008• 31 citations
arXivHTMLPDF

Abstract

We report on the realization of a chip-based multipole ion trap manufactured using microelectromechanical systems technology, requiring minimal manual alignment of the electrodes. It provides ion confinement in an almost field-free volume between two planes of radiofrequency electrodes, deposited on glass substrates, which allows for optical access to the trap. An analytical model of the effective trapping potential is presented and compared with numerical calculations. Stable trapping of argon ions is achieved, and a lifetime of 16 s is measured. Electrostatic charging of the chip surfaces is studied and found to agree with a numerical estimate.

DOI
10.1103/physreva.77.033422

Related papers

TWO-DIMENSIONAL ARRAY OF ION TRAPS ON A PLANAR CHIP

Jinyin Wan, Yuzhu Wang, Liang Liu

We investigate a planar ion chip design with a two-dimensional array of linear ion traps for the scalable quantum information processor. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate, a combination of appropriate rf and DC potentials are applied to them for stable ion confinement, and the trap axes are located above the surface at a distance controlled by the electrodes' lateral extent and the substrate's height as discussed. The potential distributions are calculated using static electric field qualitatively. This architecture is conceptually simple and many current microfabrication techniques are feasible for the basic structure. It may provide a promising route for scalable quantum computers.

Modern Physics Letters B•Jan 10, 2009•1 citation

Monolithic microfabricated ion trap forquantum information processing

Fayaz A. Shaikh

The objective of this research is to design, fabricate, and demonstrate a microfabricated \nmonolithic ion trap for applications in quantum computation and quantum simulation. \nMost current microfabricated ion trap designs are based on planar-segmented surface electrodes. \nAlthough promising scalability to trap arrays containing ten to one hundred ions, \nthese planar designs suffer from the challenges of shallow trap depths, radial asymmetry of \nthe confining potential, and electrode charging resulting from laser interactions with dielectric \nsurfaces. In this research, the design, fabrication, and testing of a monolithic \nand symmetric two-level ion trap is presented. This ion trap overcomes the challenges of \nsurface-electrode ion traps. Numerical electrostatic simulations show that this symmetric \ntrap produces a deep (1 eV for 171Yb+ ion), radially symmetric RF confinement potential. \nThe trap has an angled through-chip slot that allows back-side ion loading and generous \nthrough laser access, while avoiding surface-light scattering and dielectric charging that \ncan corrupt the design control electrode compensating potentials. The geometry of the trap \nand its dimensions are optimized for trapping long and linear ion chains with equal spacing \nfor use with quantum simulation problems and quantum computation architectures.

•Mar 26, 2013•0 citations

Surface Planar Ion Chip for Linear Radio-Frequency Paul Traps

Jinyin Wan, Qu Qiu-Zhi, Zichao Zhou +3 more

We propose a surface planar ion chip which forms a linear radio frequency Paul ion trap. The electrodes reside in the two planes of a chip, and the trap axis is located above the chip surface. Its electric field and potential distribution are similar to the standard linear radio frequency Paul ion trap. This ion trap geometry may be greatly meaningful for quantum information processing.

Chinese Physics Letters•May 1, 2007•4 citations

Planar ion chip design for scalable quantum information processing

Jinyin Wan, Wang Yu-Zhu, Liang Liu

We investigate a planar ion chip design with a two-dimensional array of linear ion traps for scalable quantum information processing. Qubits are formed from the internal electronic states of trapped 40 Ca + ions. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate separately, a combination of appropriate rf and DC potentials is applied to them for stable ion confinement. Every two adjacent electrodes can generate a linear ion trap in and between the electrodes above the chip at a distance dependent on the geometrical scale and other considerations. The potential distributions are calculated by using a static electric field qualitatively. This architecture provides a conceptually simple avenue to achieving the microfabrication and large-scale quantum computation based on the arrays of trapped ions.

Chinese Physics B•Oct 1, 2008•4 citations

Planar Ion Trap Geometry for Microfabrication

M. J. Madsen, W. K. Hensinger, D. Stick +2 more

Abstract We describe a novel high aspect ratio radiofrequency linear ion trap geometry that is amenable to modern microfabrication techniques. The ion trap electrode structure consists of a pair of stacked conducting cantilevers resulting in confining fields that take the form of fringe fields from parallel plate capacitors. The confining potentials are modeled both analytically and numerically. This ion trap geometry may form the basis for large scale quantum computers or parallel quadrupole mass spectrometers. PACS: 39.25.+k, 03.67.Lx, 07.75.+h, 07.10+Cm 1

•Jan 1, 2004•81 citations

A microfabricated ion trap chip with a sloped loading slot to minimize exposing trapped ions to stray charges

Changhyun Jung, Woojun Lee, Junho Jeong +4 more

Abstract A novel microfabricated ion trap chip that can geometrically minimize exposing trapped ions to stray charges on dielectric surfaces is developed. The new design utilizes a sloped loading slot to make the dielectric layers of the loading slot sidewalls invisible to the trapped ions. The designed loading slot is realized by applying silicon anisotropic etching processes, and the ion trap chip that contains the sloped loading slot is fabricated using microelectromechanical system processes. Stray charges induced by injecting an ultraviolet laser on the surface of the fabricated ion trap chip are experimentally characterized by measuring stray electric fields at the location of the trapped ions. The measured results are compared to those of a previous ion trap chip with a vertical loading slot. The magnitude of the measured stray electric field in the axial direction is within 1.5 V m−1 for the proposed ion trap chip, whereas it is approximately 10 V m−1 for the previously reported ion trap chip.

Quantum Science and Technology•Jul 1, 2021•10 citations
We report on the realization of a chip-based multipole ion trap manufactured using microelectromechanical systems technology, requiring minimal manual alignment of the electrodes. It provides ion confinement in an almost field-free volume between two planes of radiofrequency electrodes, deposited on glass substrates, which allows for optical access to the trap. An analytical model of the effective trapping potential is presented and compared with numerical calculations. Stable trapping of argon ions is achieved, and a lifetime of 16 s is measured. Electrostatic charging of the chip surfaces is studied and found to agree with a numerical estimate.
We investigate a planar ion chip design with a two-dimensional array of linear ion traps for the scalable quantum information processor. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate, a combination of appropriate rf and DC potentials are applied to them for stable ion confinement, and the trap axes are located above the surface at a distance controlled by the electrodes' lateral extent and the substrate's height as discussed. The potential distributions are calculated using static electric field qualitatively. This architecture is conceptually simple and many current microfabrication techniques are feasible for the basic structure. It may provide a promising route for scalable quantum computers.
The objective of this research is to design, fabricate, and demonstrate a microfabricated \nmonolithic ion trap for applications in quantum computation and quantum simulation. \nMost current microfabricated ion trap designs are based on planar-segmented surface electrodes. \nAlthough promising scalability to trap arrays containing ten to one hundred ions, \nthese planar designs suffer from the challenges of shallow trap depths, radial asymmetry of \nthe confining potential, and electrode charging resulting from laser interactions with dielectric \nsurfaces. In this research, the design, fabrication, and testing of a monolithic \nand symmetric two-level ion trap is presented. This ion trap overcomes the challenges of \nsurface-electrode ion traps. Numerical electrostatic simulations show that this symmetric \ntrap produces a deep (1 eV for 171Yb+ ion), radially symmetric RF confinement potential. \nThe trap has an angled through-chip slot that allows back-side ion loading and generous \nthrough laser access, while avoiding surface-light scattering and dielectric charging that \ncan corrupt the design control electrode compensating potentials. The geometry of the trap \nand its dimensions are optimized for trapping long and linear ion chains with equal spacing \nfor use with quantum simulation problems and quantum computation architectures.
We investigate a planar ion chip design with a two-dimensional array of linear ion traps for scalable quantum information processing. Qubits are formed from the internal electronic states of trapped 40 Ca + ions. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate separately, a combination of appropriate rf and DC potentials is applied to them for stable ion confinement. Every two adjacent electrodes can generate a linear ion trap in and between the electrodes above the chip at a distance dependent on the geometrical scale and other considerations. The potential distributions are calculated by using a static electric field qualitatively. This architecture provides a conceptually simple avenue to achieving the microfabrication and large-scale quantum computation based on the arrays of trapped ions.
Abstract We describe a novel high aspect ratio radiofrequency linear ion trap geometry that is amenable to modern microfabrication techniques. The ion trap electrode structure consists of a pair of stacked conducting cantilevers resulting in confining fields that take the form of fringe fields from parallel plate capacitors. The confining potentials are modeled both analytically and numerically. This ion trap geometry may form the basis for large scale quantum computers or parallel quadrupole mass spectrometers. PACS: 39.25.+k, 03.67.Lx, 07.75.+h, 07.10+Cm 1
Abstract A novel microfabricated ion trap chip that can geometrically minimize exposing trapped ions to stray charges on dielectric surfaces is developed. The new design utilizes a sloped loading slot to make the dielectric layers of the loading slot sidewalls invisible to the trapped ions. The designed loading slot is realized by applying silicon anisotropic etching processes, and the ion trap chip that contains the sloped loading slot is fabricated using microelectromechanical system processes. Stray charges induced by injecting an ultraviolet laser on the surface of the fabricated ion trap chip are experimentally characterized by measuring stray electric fields at the location of the trapped ions. The measured results are compared to those of a previous ion trap chip with a vertical loading slot. The magnitude of the measured stray electric field in the axial direction is within 1.5 V m−1 for the proposed ion trap chip, whereas it is approximately 10 V m−1 for the previously reported ion trap chip.