Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Modern Physics Letters B

TWO-DIMENSIONAL ARRAY OF ION TRAPS ON A PLANAR CHIP

Jinyin Wan, Yuzhu Wang, Liang Liu

Published Jan 10, 2009• 1 citation
Publisher

Abstract

We investigate a planar ion chip design with a two-dimensional array of linear ion traps for the scalable quantum information processor. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate, a combination of appropriate rf and DC potentials are applied to them for stable ion confinement, and the trap axes are located above the surface at a distance controlled by the electrodes' lateral extent and the substrate's height as discussed. The potential distributions are calculated using static electric field qualitatively. This architecture is conceptually simple and many current microfabrication techniques are feasible for the basic structure. It may provide a promising route for scalable quantum computers.

DOI
10.1142/s0217984909017819

Related papers

Planar ion chip design for scalable quantum information processing

Jinyin Wan, Wang Yu-Zhu, Liang Liu

We investigate a planar ion chip design with a two-dimensional array of linear ion traps for scalable quantum information processing. Qubits are formed from the internal electronic states of trapped 40 Ca + ions. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate separately, a combination of appropriate rf and DC potentials is applied to them for stable ion confinement. Every two adjacent electrodes can generate a linear ion trap in and between the electrodes above the chip at a distance dependent on the geometrical scale and other considerations. The potential distributions are calculated by using a static electric field qualitatively. This architecture provides a conceptually simple avenue to achieving the microfabrication and large-scale quantum computation based on the arrays of trapped ions.

Chinese Physics B•Oct 1, 2008•4 citations

Monolithic microfabricated ion trap forquantum information processing

Fayaz A. Shaikh

The objective of this research is to design, fabricate, and demonstrate a microfabricated \nmonolithic ion trap for applications in quantum computation and quantum simulation. \nMost current microfabricated ion trap designs are based on planar-segmented surface electrodes. \nAlthough promising scalability to trap arrays containing ten to one hundred ions, \nthese planar designs suffer from the challenges of shallow trap depths, radial asymmetry of \nthe confining potential, and electrode charging resulting from laser interactions with dielectric \nsurfaces. In this research, the design, fabrication, and testing of a monolithic \nand symmetric two-level ion trap is presented. This ion trap overcomes the challenges of \nsurface-electrode ion traps. Numerical electrostatic simulations show that this symmetric \ntrap produces a deep (1 eV for 171Yb+ ion), radially symmetric RF confinement potential. \nThe trap has an angled through-chip slot that allows back-side ion loading and generous \nthrough laser access, while avoiding surface-light scattering and dielectric charging that \ncan corrupt the design control electrode compensating potentials. The geometry of the trap \nand its dimensions are optimized for trapping long and linear ion chains with equal spacing \nfor use with quantum simulation problems and quantum computation architectures.

•Mar 26, 2013•0 citations

Surface-electrode architecture for ion-trap quantum information processing

John Chiaverini, R. B. Blakestad, J. Britton +5 more

We investigate a surface-mounted electrode geometry for miniature linear radio frequency Paul ion traps. The electrodes reside in a single plane on a substrate, and the pseudopotential minimum of the trap is located above the substrate at a distance on the order of the electrodes' lateral extent or separation. This architecture provides the possibility to apply standard microfabrication principles to the construction of multiplexed ion traps, which may be of particular importance in light of recent proposals for large-scale quantum computation based on individual trapped ions.

arXiv:quant-ph/0501147•Quantum Information and Computation•Sep 1, 2005•276 citations

A grooved planar ion trap design for scalable quantum information processing

Wei-Bang Ji, Jinyin Wan, Hua-Dong Cheng +1 more

We describe a new electrode design for a grooved surface-electrode ion trap, which is fabricated in printed-circuit-board technology with segmented electrodes. This design allows a laser beam to get through the central groove to avoid optical access blocking and laser scattering from the ion trap surface. The confining potentials are modeled both analytically and numerically. We optimize the radio frequency (rf) electrodes and dc electrodes to achieve the maximum trap depth for a given ion height above the trap electrodes. We also compare our design with the reality ion chip MI I for practical considerations. Comparison results show that our design is superior to MI I. This ion trap design may form the basis for large scale quantum computers or parallel quadrupole mass spectrometers.

Chinese Physics B•Jun 1, 2012•3 citations

Surface Planar Ion Chip for Linear Radio-Frequency Paul Traps

Jinyin Wan, Qu Qiu-Zhi, Zichao Zhou +3 more

We propose a surface planar ion chip which forms a linear radio frequency Paul ion trap. The electrodes reside in the two planes of a chip, and the trap axis is located above the chip surface. Its electric field and potential distribution are similar to the standard linear radio frequency Paul ion trap. This ion trap geometry may be greatly meaningful for quantum information processing.

Chinese Physics Letters•May 1, 2007•4 citations

Demonstration of transport in an ion trap design for two-dimensional lattices

Michael Pfeifer, Marco Valentini, Matthias Dietl +7 more

Microfabricated ion trap chips are at the core of some of the most advanced quantum computers. How a large number of ions is arranged and controlled on an ion trap chip depends on the chosen trap architecture. One such architecture is the quantum spring array (QSA). In the QSA architecture, ion chains are arranged in a two-dimensional lattice and interact with ion chains in neighboring sites in the radial and axial directions of the respective chain. This interaction, or coupling, is mediated by the Coulomb force while keeping ions in separate trapping sites, and scales inversely with the third power of the separation. The capability to control the distance between ions in the lattice is thus essential. In previous works, the radial separation between ions was tuned by controlling the rf pseudo-potential, which revealed to be experimentally challenging to realize while maintaining low heating rates. In this work, we present an ion trap chip design that allows tuning of the radial distance between ions using only dc voltages. The radial transport is executed between different interaction zones, designated for quantum operations, through specifically designed transition zones. A prototype of this type of ion trap chip was microfabricated on fused silica substrate. Its functionality is characterized by demonstrating dc-controlled radial transport of a single ion through a transition zone and measuring stray fields and ion heating rates in the center of the trap. Moreover, the fabrication of a multi-metal layer version of such a trap is presented as a scaling path for the presented chip design.

quant-pharXiv:2605.16543•May 19, 2026•0 citations
We investigate a planar ion chip design with a two-dimensional array of linear ion traps for the scalable quantum information processor. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate, a combination of appropriate rf and DC potentials are applied to them for stable ion confinement, and the trap axes are located above the surface at a distance controlled by the electrodes' lateral extent and the substrate's height as discussed. The potential distributions are calculated using static electric field qualitatively. This architecture is conceptually simple and many current microfabrication techniques are feasible for the basic structure. It may provide a promising route for scalable quantum computers.
We investigate a planar ion chip design with a two-dimensional array of linear ion traps for scalable quantum information processing. Qubits are formed from the internal electronic states of trapped 40 Ca + ions. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate separately, a combination of appropriate rf and DC potentials is applied to them for stable ion confinement. Every two adjacent electrodes can generate a linear ion trap in and between the electrodes above the chip at a distance dependent on the geometrical scale and other considerations. The potential distributions are calculated by using a static electric field qualitatively. This architecture provides a conceptually simple avenue to achieving the microfabrication and large-scale quantum computation based on the arrays of trapped ions.
The objective of this research is to design, fabricate, and demonstrate a microfabricated \nmonolithic ion trap for applications in quantum computation and quantum simulation. \nMost current microfabricated ion trap designs are based on planar-segmented surface electrodes. \nAlthough promising scalability to trap arrays containing ten to one hundred ions, \nthese planar designs suffer from the challenges of shallow trap depths, radial asymmetry of \nthe confining potential, and electrode charging resulting from laser interactions with dielectric \nsurfaces. In this research, the design, fabrication, and testing of a monolithic \nand symmetric two-level ion trap is presented. This ion trap overcomes the challenges of \nsurface-electrode ion traps. Numerical electrostatic simulations show that this symmetric \ntrap produces a deep (1 eV for 171Yb+ ion), radially symmetric RF confinement potential. \nThe trap has an angled through-chip slot that allows back-side ion loading and generous \nthrough laser access, while avoiding surface-light scattering and dielectric charging that \ncan corrupt the design control electrode compensating potentials. The geometry of the trap \nand its dimensions are optimized for trapping long and linear ion chains with equal spacing \nfor use with quantum simulation problems and quantum computation architectures.
We investigate a surface-mounted electrode geometry for miniature linear radio frequency Paul ion traps. The electrodes reside in a single plane on a substrate, and the pseudopotential minimum of the trap is located above the substrate at a distance on the order of the electrodes' lateral extent or separation. This architecture provides the possibility to apply standard microfabrication principles to the construction of multiplexed ion traps, which may be of particular importance in light of recent proposals for large-scale quantum computation based on individual trapped ions.
We describe a new electrode design for a grooved surface-electrode ion trap, which is fabricated in printed-circuit-board technology with segmented electrodes. This design allows a laser beam to get through the central groove to avoid optical access blocking and laser scattering from the ion trap surface. The confining potentials are modeled both analytically and numerically. We optimize the radio frequency (rf) electrodes and dc electrodes to achieve the maximum trap depth for a given ion height above the trap electrodes. We also compare our design with the reality ion chip MI I for practical considerations. Comparison results show that our design is superior to MI I. This ion trap design may form the basis for large scale quantum computers or parallel quadrupole mass spectrometers.
Microfabricated ion trap chips are at the core of some of the most advanced quantum computers. How a large number of ions is arranged and controlled on an ion trap chip depends on the chosen trap architecture. One such architecture is the quantum spring array (QSA). In the QSA architecture, ion chains are arranged in a two-dimensional lattice and interact with ion chains in neighboring sites in the radial and axial directions of the respective chain. This interaction, or coupling, is mediated by the Coulomb force while keeping ions in separate trapping sites, and scales inversely with the third power of the separation. The capability to control the distance between ions in the lattice is thus essential. In previous works, the radial separation between ions was tuned by controlling the rf pseudo-potential, which revealed to be experimentally challenging to realize while maintaining low heating rates. In this work, we present an ion trap chip design that allows tuning of the radial distance between ions using only dc voltages. The radial transport is executed between different interaction zones, designated for quantum operations, through specifically designed transition zones. A prototype of this type of ion trap chip was microfabricated on fused silica substrate. Its functionality is characterized by demonstrating dc-controlled radial transport of a single ion through a transition zone and measuring stray fields and ion heating rates in the center of the trap. Moreover, the fabrication of a multi-metal layer version of such a trap is presented as a scaling path for the presented chip design.