We describe an experimentally straightforward method for preparing an entangled W state of at least 100 qubits. Our repeat-until-success protocol relies on detection of single photons from collective spontaneous emission in free space. Our method allows entanglement preparation in a wide range of qubit implementations that lack entangling qubit–qubit interactions. We give detailed numerical examples for entanglement of neutral atoms in optical lattices and of nitrogen-vacancy centres in diamond. The simplicity of our method should enable preparation of mesoscopic entangled states in a number of physical systems in the near future.
We describe an experimentally straightforward method for preparing an entangled W state of at least 100 qubits. Our repeat-until-success protocol relies on detection of single photons from collective spontaneous emission in free space. Our method allows entanglement preparation in a wide range of qubit implementations that lack entangling qubit–qubit interactions. We give detailed numerical examples for entanglement of neutral atoms in optical lattices and of nitrogen-vacancy centres in diamond. The simplicity of our method should enable preparation of mesoscopic entangled states in a number of physical systems in the near future.
Implementations of solid-state quantum optics provide us with devices where qubits are placed at fixed positions in photonic or plasmonic one-dimensional waveguides. We show that solely by controlling the position of the qubits and with the help of a coherent driving, collective spontaneous decay may be engineered to yield an entangled mesoscopic steady state. Our scheme relies on the realization of pure superradiant Dicke models by a destructive interference that cancels dipole-dipole interactions in one dimension.
We show how radiation emitted from a collection of noninteracting two-level particles, which can be treated as qubits, can be used to detect a wide class of entangled states of this system. This result is an example of a macroscopical manifestation of entanglement that can be inferred from direct measurements. Some examples of physical effects directly related to the collective emission of radiation, such as photon echoes and superradiance, are discussed, suggesting some ways of how to experimentally witness entanglement with simple and standard techniques.
Quantum entanglement, a key resource for quantum information science, is inherent in a solid. It has been recently shown that entanglement between a single optical photon and a single spin qubit in a solid is generated via spontaneous emission. However, entanglement generation by measurement is rather essential for quantum operations. We here show that the physics behind the entangled emission can be time reversed to demonstrate entangled absorption mediated by an inherent spin-orbit entanglement in a single nitrogen vacancy center in diamond. Optical arbitrary spin state preparation and complete spin state tomography reveal the fidelity of the entangled absorption to be 95%. With the entangled emission and absorption of a photon, materials can be spontaneously entangled or swap their quantum state based on the quantum teleportation scheme.
Abstract The generation of entanglement between remote matter qubits has developed into a key capability for fundamental investigations as well as for emerging quantum technologies. In the single-photon, protocol entanglement is heralded by generation of qubit-photon entangled states and subsequent detection of a single photon behind a beam splitter. In this work we perform a detailed theoretical and experimental investigation of this protocol and its various sources of infidelity. We develop an extensive theoretical model and subsequently tailor it to our experimental setting, based on nitrogen-vacancy centers in diamond. Experimentally, we verify the model by generating remote states for varying phase and amplitudes of the initial qubit superposition states and varying optical phase difference of the photons arriving at the beam splitter. We show that a static frequency offset between the optical transitions of the qubits leads to an entangled state phase that depends on the photon detection time. We find that the implementation of a Charge-Resonance check on the nitrogen-vacancy center yields transform-limited linewidths. Moreover, we measure the probability of double optical excitation, a significant source of infidelity, as a function of the power of the excitation pulse. Finally, we find that imperfect optical excitation can lead to a detection-arm-dependent entangled state fidelity and rate. The conclusion presented here are not specific to the nitrogen-vacancy centers used to carry out the experiments, and are therefore readily applicable to other qubit platforms.
Manipulation of quantum effects for computing is an important step in the creation of faster and more powerful computational tools. The nitrogen vacancy centre (NVC) in diamond, when in the negative charge state, has shown significant promise towards being used as a qubit, such as optical polarization and readout, long coherence times (T∗ 2 and T2), and a long relaxation time T1. Such times are desired for producing good quantum memory, utilising the spin state of the sites. Cryogenic conditions are required for facilitating the optical entanglement of two NVC, and can serve to significantly extend these times. These sites have been created using a laser writing technique, capable of producing a large number of NVC with good coherence characteristics at arbitrary locations within diamond samples. This thesis reports on methods to reliably create NVC with good coherence characteristics for quantum computing applications by altering the annealing regime used. This annealing regime has been improved by the design and construction of a new vacuum furnace with better temperature control and thermometry. Steps towards the ideal combination of annealing conditions for a range of desired NV concentrations and characteristics have been undertaken, showing good conversion of laser written sites to NVC. NVC have been systematically tracked using a confocal fluorescence microscope apparatus throughout multiple annealing steps, with the collection of coherence data including T1, T2 and T∗ 2 on the same NV centre at multiple annealing temperatures, for the first time. This data allows for tracking of the influence of annealing temperature on the coherence properties of sites without the caveat of comparing data from either different sites, or different diamonds altogether. Such centres show coherence times above 800 μs, with production rates at and above 40% for single emitters. NVC are limited by their weak emission into the zero phonon line. These issues can be alleviated by increasing the collection efficiency of photons, which requires thin diamonds capable of being used with cavity systems. Steps towards producing such diamonds by a thin-region design have been undertaken and show promising results. Further efforts include the use of nanostructures on the diamond surface, which has been implemented and detailed. Magnetic control of NVC within diamond, especially at cryogenic temperatures, introduces some operational complexity to potential quantum operations. By implementing the use of diamond cut at the (111) crystal plane, this alignment is likely to become more straightforward, enabling future work with diamond at this crystal plane. Diamonds have been produced, with NVC laser written in, for the first time.
The fluorescence of the nitrogen-vacancy (NV) centre in artificial diamond has been widely studied for applications such as quantum communication protocols, quantum computation, fluorescence-based biolabelling, and optical sensing. Optical sensing by itself encompasses a wide range of possible applications: from magnetic and electric field sensing to temperature sensing and enabling, for example, the detection of paramagnetic ions and the identification of molecules by nuclear magnetic resonance. Compared to many other systems capable of optical sensing, the NV centre works at room temperature, and its spin-dependent fluorescence emission is the key property to achieve a high sensitivity to the surrounding environment. Additionally, the NV centre emission is highly photostable, has a relatively short lifetime (~ 12ns) and spans a broad wavelength range, from the red to the near-infrared region of the electromagnetic spectrum (600 - 800nm). While the common denominator of all mentioned applications is the NV centre, the properties of the artificial diamond surrounding the NV centre have a significant impact on its sensing performance. At present, the processing of artificial diamond has not been fully optimised, and research and development towards the realisation of the `best¿ diamond sample for optical sensing is far from over. Specifically, the role of other defects in diamond and their effects on the photo-physical properties of the NV centres are not entirely understood. In this thesis, I will discuss the potential benefits of a novel processing technique to create ensembles of NV centres, and the importance that surrounding nitrogen defects has on the achievable magnetic field sensitivity. Additionally, I will show both theoretical and experimental investigations of the NV centres photo-physical processes, with focus on magnetic field sensing. I will initially explore a protocol for microwave-free magnetometry. This protocol predicts a theoretical magnetic field sensitivity <10µT/√Hz in the range 0.3 - 30mT and I will demonstrate it experimentally with a maximum sensitivity of 3.6mT/Hz. Following, I will focus on exploring techniques to increase the magnetic field sensitivity by improving the material properties of the diamond samples. I will demonstrate that the simultaneous electron irradiation and annealing improves the creation efficiency of an ensemble of NV centres by up to 117%. Finally, I will investigate how substitutional nitrogen defects in the surrounding lattice affects the charge state of the NV centre, its emission intensity, its lifetime and its magnetic field sensitivity. I will study a sample characterised by multiple regions across its volume, with nitrogen concentration changing between 10ppm and 100ppm in each region. There si an optimal region with ~ 40ppm of substitutional nitrogen which demonstrates the highest fluorescence emission, mainly from the negatively-charged NV centre, and the highest magnetic field sensitivity of 1.6 ± 0.2µT/√Hz. However, both the regions with lower and higher substitutional nitrogen concentration than the optimal region show lower emission intensity and worse magnetic field sensitivity. Following is a summary of the content in each chapter: Chapter 1 will present an introduction to the diamond material and the classification of artificial diamond samples. It will introduce the NV centre, its fluorescence properties and the process to create NV centres in diamond. The chapter will also introduce the concepts around optical magnetometry and the working principle that allows the NV centre to sense magnetic fields as well as other external quantities, such as temperature or pressure. Finally, it will include a brief overview of the defects that are found in artificial diamond or are created during the sample processing. Chapter 2 will describe the working principle of the instruments utilised in this work. I will list the details of each instrument and describe the methods used for the analysis of the data. Chapter 3 will introduce the background of modelling the fluorescence emission from NV centres. I will discuss the implementation of a computational model based on the Lindblad master equation to simulate the photo-physical dynamics of the NV centre. I will demonstrate the successful simulation of the saturation emission, fluorescence lifetime and optically detected magnetic resonance using the theoretical model. Finally, I will explore the theoretically predicted sensitivity of microwave-free magnetometry, based on the NV centre emission intensity change under an external magnetic field. Chapter 4 will demonstrate experimentally the microwave-free magnetometry technique. In relation to the study of microwave-free magnetometry, this chapter will explore an unexpected increase in emission intensity at high magnetic fields > 100mT. Combining the experimental observations and the theoretical simulation developed in the previous chapter, I will identify and discuss a phenomenological decrease in the NV centre transition rate from the triplet state to the singlet state. The chapter will conclude comparing the experimental and theoretical sensitivities associated with the microwave-free magnetometry technique. Chapter 5 will show the characterisation of a diamond sample at each step of the process to create NV centres. I will study the electron irradiation followed by separate annealing on a high-pressure high-temperature diamond sample. I will then characterise the sample employing visible and infrared absorption spectroscopy, as well as measure the fluorescence spectra and lifetime of the defects identified at each step. Chapter 6 will examine an alternative method to create NV centres in diamond. I will compare diamond samples irradiated and annealed separately with samples simultaneously irradiated and annealed (referred to as 'annealing in situ'). To compare the two processes, I will estimate the concentration of nitrogen defects and NV centres and calculate their N-to-NV conversion efficiency. Chapter 7 will discuss the effects of substitutional nitrogen on the properties of the NV centres in diamond. For this discussion, I will use a single-crystal diamond that shows the presence of 4 growth sectors. Each growth sector is characterised by a different nitrogen concentration, as I will demonstrate at the beginning of the chapter. I will focus on 4 main properties affected by the concentration of nitrogen in the different sectors: the balance between the charge states of the NV centre, the overall fluorescence intensity from each sector, the fluorescence lifetime and its relation to non-radiative processes, and the magnetic field sensitivity obtained with the optically detected magnetic resonance technique. Chapter 8 will gather the results and conclusions of the entire body of work. It will also discuss future avenues of research in the topic of diamond processing and characterisations, to improve the existing optical sensing applications.