Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:quant-ph/0508097 · Applied Physics Letters

T-junction ion trap array for two-dimensional ion shuttling, storage, and manipulation

W. K. Hensinger, S. Olmschenk, D. Stick, D. Hucul, M. Yeo, M. Acton, Louis Deslauriers, C. Monroe, J. Rabchuk

Published Jan 13, 2006• 221 citations
arXivHTMLPDF

Abstract

We demonstrate a two-dimensional 11-zone ion trap array, where individual laser-cooled atomic ions are stored, separated, shuttled, and swapped. The trap geometry consists of two linear rf-ion trap sections that are joined at a 90° angle to form a T-shaped structure. We shuttle a single ion around the corners of the T-junction and swap the positions of two crystallized ions using voltage sequences designed to accommodate the nontrivial electrical potential near the junction. Full two-dimensional control of multiple ions demonstrated in this system may be crucial for the realization of scalable ion trap quantum computation and the implementation of quantum networks.

DOI
10.1063/1.2164910

Related papers

On the transport of atomic ions in linear and multidimensional ion trap arrays

David Hucul, Mark Yeo, W. K. Hensinger +3 more

Trapped atomic ions have become one of the most promising architectures for a quantum computer, and current effort is now devoted to the transport of trapped ions through complex segmented ion trap structures in order to scale up to much larger numbers of trapped ion qubits. This paper covers several important issues relevant to ion transport in any type of complex multidimensional rf (Paul) ion trap array. We develop a general theoretical framework for the application of time-dependent electric fields to shuttle laser-cooled ions along any desired trajectory, and describe a method for determining the effect of arbitrary shuttling schedules on the quantum state of trapped ion motion. In addition to the general case of linear shuttling over short distances, we introduce issues particular to the shuttling through multidimensional junctions, which are required for the arbitrary control of the positions of large arrays of trapped ions. This includes the transport of ions around a corner, through a cross or T junction, and the swapping of positions of multiple ions in a laser-cooled crystal. Where possible, we make connections to recent experimental results in a multidimensional T junction trap, where arbitrary 2-dimensional transport was realized.

arXiv:quant-ph/0702175•Quantum Information and Computation•Jul 1, 2008•74 citations

Shuttling in Bidimensional Segmented Ion-Trap Quantum Processors with T-Junctions

J. Durandau, C. A. Brunet, F. Schmidt-Kaler +3 more

Shuttle-based trapped ion quantum processors typically employ a one-dimensional (1D) linear architecture to transport ion-qubits between one ore more laser interaction zones where the quantum gates are implemented, along with several qubit register storage segments. The two-dimensional (2D) quantum CCD architecture employs also T- or X-junctions for an improved scaling and efficiency. Here, we explore the shuttling layer in the compilation of quantum algorithm typical building blocks in such architecture. To weight the effort of linear shuttle and junction shuttle, we introduce individual cost functions for each operation. This allows comparing the total cost for quantum circuit building blocks such as the QFT, Carry, Adder, Shift, and Comparator circuits. We study their scaling properties with increased qubit numbers. At equivalent transport cost for junction and linear shuttling, we show that 2D architectures outperform the 1D linear trap with the ratio improving as the number of ions increases. Finally, we discuss the use of cells, such that the entire processor is constructed from a 2D array of such interconnected cells. The work aims to optimize quantum processor architectures, implementing a co-design that fits to the specific task and scaling up in a shuttle-efficient way.

quant-pharXiv:2606.21899•Jun 23, 2026•2 citations

Design, fabrication and experimental demonstration of junction surface ion traps

D L Moehring, C Highstrete, Daniel Stick +4 more

We present the design, fabrication and experimental implementation of surface ion traps with Y-shaped junctions. The traps are designed to minimize the pseudopotential variations in the junction region at the symmetric intersection of three linear segments. We experimentally demonstrate robust linear and junction shuttling with greater than 10 6 round-trip shuttles without ion loss. By minimizing the direct line of sight between trapped ions and dielectric surfaces, negligible day-to-day and trap-to-trap variations are observed. In addition to high-fidelity single-ion shuttling, multiple-ion chains survive splitting, ion-position swapping and recombining routines. The development of two-dimensional trapping structures is an important milestone for ion-trap quantum computing and quantum simulations.

arXiv:1105.1834•New Journal of Physics•Jul 29, 2011•94 citations

Bilayer ion trap design for 2D arrays

Gavin Nop, Jonathan D. H. Smith, Daniel Stick +1 more

Abstract Junctions are fundamental elements that support qubit locomotion in two-dimensional ion trap arrays and enhance connectivity in emerging trapped-ion quantum computers. In surface ion traps they have typically been implemented by shaping radio frequency (RF) electrodes in a single plane to minimize the disturbance to the pseudopotential. However, this method introduces issues related to RF lead routing that can increase power dissipation and the likelihood of voltage breakdown. Here, we propose and simulate a novel two-layer junction design incorporating two perpendicularly rotoreflected (rotated, then reflected) linear ion traps. The traps are vertically separated, and create a trapping potential between their respective planes. The orthogonal orientation of the RF electrodes of each trap relative to the other provides perpendicular axes of confinement that can be used to realize transport in two dimensions. While this design introduces manufacturing and operating challenges, as now two separate structures have to be precisely positioned relative to each other in the vertical direction and optical access from the top is obscured, it obviates the need to route RF leads below the top surface of the trap and eliminates the pseudopotential bumps that occur in typical junctions. In this paper the stability of idealized ion transfer in the new configuration is demonstrated, both by solving the Mathieu equation analytically to identify the stable regions and by numerically modeling ion dynamics. Our novel junction layout has the potential to enhance the flexibility of microfabricated ion trap control to enable large-scale trapped-ion quantum computing.

arXiv:2310.07195•Quantum Science and Technology•Apr 16, 2024•2 citations

A versatile laser-machined rf trap for arrays of 100+ ions

Frank G. Schroer, Ilyoung Jung, Thomas W. Burkle +4 more

Large ion crystals in diverse geometries are a key resource for quantum simulation experiments. In this work, we introduce a macroscopic rf trap that supports a wide variety of one-dimensional ion configurations as well as lateral two-dimensional crystals with more than 100 ions. Our design is based on precision-machined fused silica wafers that are stacked to form the trap structure. Ten independently biased electrodes provide flexible control over the axial potential, enabling long one-dimensional crystals, isospaced ion strings, split-well chains, and two-dimensional arrays with tunable aspect ratios. We present the design and fabrication process for this trap and demonstrate the ability to tune the radial secular frequencies, detect and compensate micromotion, rotate the principal axes, and characterize trapped ion heating rates. All trap design and documentation files are freely available alongside this work, to facilitate adoption and further development within the ion trap community.

quant-pharXiv:2607.13342•Jul 16, 2026•2 citations

Deterministic reordering of40Ca+ions in a linear segmented Paul trap

F Splatt, Maximilian Harlander, Michael Brownnutt +3 more

In the endeavour to scale up the number of qubits in an ion-based quantum computer several groups have started to develop miniaturized ion traps for extended spatial control and manipulation of the ions. Shuttling and separation of ion strings have been the foremost issues in linear-trap arrangements and some prototypes of junctions have been demonstrated for the extension of ion motion to two dimensions (2D). While junctions require complex trap structures, small extensions to the 1D motion can be accomplished in simple linear trap arrangements. Here, control of the extended field in a planar, linear chip trap is used to shuttle ions in 2D. With this approach, the order of ions in a string is deterministically reversed. Optimized potentials are theoretically derived and simulations show that the reordering can be carried out adiabatically. The control over individual ion positions in a linear trap presents a new tool for ion-trap quantum computing. The method is also expected to work with mixed crystals of different ion species and as such could have applications for sympathetic cooling of an ion string.

arXiv:0906.5335•New Journal of Physics•Oct 2, 2009•53 citations
We demonstrate a two-dimensional 11-zone ion trap array, where individual laser-cooled atomic ions are stored, separated, shuttled, and swapped. The trap geometry consists of two linear rf-ion trap sections that are joined at a 90° angle to form a T-shaped structure. We shuttle a single ion around the corners of the T-junction and swap the positions of two crystallized ions using voltage sequences designed to accommodate the nontrivial electrical potential near the junction. Full two-dimensional control of multiple ions demonstrated in this system may be crucial for the realization of scalable ion trap quantum computation and the implementation of quantum networks.
Trapped atomic ions have become one of the most promising architectures for a quantum computer, and current effort is now devoted to the transport of trapped ions through complex segmented ion trap structures in order to scale up to much larger numbers of trapped ion qubits. This paper covers several important issues relevant to ion transport in any type of complex multidimensional rf (Paul) ion trap array. We develop a general theoretical framework for the application of time-dependent electric fields to shuttle laser-cooled ions along any desired trajectory, and describe a method for determining the effect of arbitrary shuttling schedules on the quantum state of trapped ion motion. In addition to the general case of linear shuttling over short distances, we introduce issues particular to the shuttling through multidimensional junctions, which are required for the arbitrary control of the positions of large arrays of trapped ions. This includes the transport of ions around a corner, through a cross or T junction, and the swapping of positions of multiple ions in a laser-cooled crystal. Where possible, we make connections to recent experimental results in a multidimensional T junction trap, where arbitrary 2-dimensional transport was realized.
Shuttle-based trapped ion quantum processors typically employ a one-dimensional (1D) linear architecture to transport ion-qubits between one ore more laser interaction zones where the quantum gates are implemented, along with several qubit register storage segments. The two-dimensional (2D) quantum CCD architecture employs also T- or X-junctions for an improved scaling and efficiency. Here, we explore the shuttling layer in the compilation of quantum algorithm typical building blocks in such architecture. To weight the effort of linear shuttle and junction shuttle, we introduce individual cost functions for each operation. This allows comparing the total cost for quantum circuit building blocks such as the QFT, Carry, Adder, Shift, and Comparator circuits. We study their scaling properties with increased qubit numbers. At equivalent transport cost for junction and linear shuttling, we show that 2D architectures outperform the 1D linear trap with the ratio improving as the number of ions increases. Finally, we discuss the use of cells, such that the entire processor is constructed from a 2D array of such interconnected cells. The work aims to optimize quantum processor architectures, implementing a co-design that fits to the specific task and scaling up in a shuttle-efficient way.
We present the design, fabrication and experimental implementation of surface ion traps with Y-shaped junctions. The traps are designed to minimize the pseudopotential variations in the junction region at the symmetric intersection of three linear segments. We experimentally demonstrate robust linear and junction shuttling with greater than 10 6 round-trip shuttles without ion loss. By minimizing the direct line of sight between trapped ions and dielectric surfaces, negligible day-to-day and trap-to-trap variations are observed. In addition to high-fidelity single-ion shuttling, multiple-ion chains survive splitting, ion-position swapping and recombining routines. The development of two-dimensional trapping structures is an important milestone for ion-trap quantum computing and quantum simulations.
Abstract Junctions are fundamental elements that support qubit locomotion in two-dimensional ion trap arrays and enhance connectivity in emerging trapped-ion quantum computers. In surface ion traps they have typically been implemented by shaping radio frequency (RF) electrodes in a single plane to minimize the disturbance to the pseudopotential. However, this method introduces issues related to RF lead routing that can increase power dissipation and the likelihood of voltage breakdown. Here, we propose and simulate a novel two-layer junction design incorporating two perpendicularly rotoreflected (rotated, then reflected) linear ion traps. The traps are vertically separated, and create a trapping potential between their respective planes. The orthogonal orientation of the RF electrodes of each trap relative to the other provides perpendicular axes of confinement that can be used to realize transport in two dimensions. While this design introduces manufacturing and operating challenges, as now two separate structures have to be precisely positioned relative to each other in the vertical direction and optical access from the top is obscured, it obviates the need to route RF leads below the top surface of the trap and eliminates the pseudopotential bumps that occur in typical junctions. In this paper the stability of idealized ion transfer in the new configuration is demonstrated, both by solving the Mathieu equation analytically to identify the stable regions and by numerically modeling ion dynamics. Our novel junction layout has the potential to enhance the flexibility of microfabricated ion trap control to enable large-scale trapped-ion quantum computing.
Large ion crystals in diverse geometries are a key resource for quantum simulation experiments. In this work, we introduce a macroscopic rf trap that supports a wide variety of one-dimensional ion configurations as well as lateral two-dimensional crystals with more than 100 ions. Our design is based on precision-machined fused silica wafers that are stacked to form the trap structure. Ten independently biased electrodes provide flexible control over the axial potential, enabling long one-dimensional crystals, isospaced ion strings, split-well chains, and two-dimensional arrays with tunable aspect ratios. We present the design and fabrication process for this trap and demonstrate the ability to tune the radial secular frequencies, detect and compensate micromotion, rotate the principal axes, and characterize trapped ion heating rates. All trap design and documentation files are freely available alongside this work, to facilitate adoption and further development within the ion trap community.
In the endeavour to scale up the number of qubits in an ion-based quantum computer several groups have started to develop miniaturized ion traps for extended spatial control and manipulation of the ions. Shuttling and separation of ion strings have been the foremost issues in linear-trap arrangements and some prototypes of junctions have been demonstrated for the extension of ion motion to two dimensions (2D). While junctions require complex trap structures, small extensions to the 1D motion can be accomplished in simple linear trap arrangements. Here, control of the extended field in a planar, linear chip trap is used to shuttle ions in 2D. With this approach, the order of ions in a string is deterministically reversed. Optimized potentials are theoretically derived and simulations show that the reordering can be carried out adiabatically. The control over individual ion positions in a linear trap presents a new tool for ion-trap quantum computing. The method is also expected to work with mixed crystals of different ion species and as such could have applications for sympathetic cooling of an ion string.