Quantum circuits implementing fault-tolerant quantum error correction (QEC) for the three-qubit bit-flip code and five-qubit code are studied. To describe the effect of noise, we apply a model based on a generalized effective Hamiltonian where the system-environment interactions are taken into account by including stochastic fluctuating terms in the system Hamiltonian. This noise model enables us to investigate the effect of noise in quantum circuits under realistic device conditions and avoid strong assumptions such as maximal parallelism and weak storage errors. Noise thresholds of the QEC codes are calculated. In addition, the effects of imprecision in projective measurements, collective bath, fault-tolerant repetition protocols, and level of parallelism in circuit constructions on the threshold values are also studied with emphasis on determining the optimal design for the fault-tolerant QEC circuit. These results provide insights into the fault-tolerant QEC process as well as useful information for designing the optimal fault-tolerant QEC circuit for particular physical implementation of quantum computer.
Quantum circuits implementing fault-tolerant quantum error correction (QEC) for the three-qubit bit-flip code and five-qubit code are studied. To describe the effect of noise, we apply a model based on a generalized effective Hamiltonian where the system-environment interactions are taken into account by including stochastic fluctuating terms in the system Hamiltonian. This noise model enables us to investigate the effect of noise in quantum circuits under realistic device conditions and avoid strong assumptions such as maximal parallelism and weak storage errors. Noise thresholds of the QEC codes are calculated. In addition, the effects of imprecision in projective measurements, collective bath, fault-tolerant repetition protocols, and level of parallelism in circuit constructions on the threshold values are also studied with emphasis on determining the optimal design for the fault-tolerant QEC circuit. These results provide insights into the fault-tolerant QEC process as well as useful information for designing the optimal fault-tolerant QEC circuit for particular physical implementation of quantum computer.
Quantum systems operate using quantum bits (qubits), which are highly sensitive to external noises and disturbances and they are easily prone to errors. In the Noisy Intermediate-Scale Quantum (NISQ) era, these errors make difficult to build reliable, fault tolerant quantum circuits for real world deployment. This work provides an overview of need for Quantum Error Correction (QEC) in NISQ devices, as qubits commonly get affected by bit-flip, phase-flip, and combined errors that degrades system performance and examines Quantum Error Correction Code (QECC) techniques usage in communication, computation, and quantum multimedia applications such as image and video transmission. In addition, a simple three-qubit repetition circuit is introduced to demonstrate an error-mitigation approach. These findings, also show how QEC improves fidelity, reduces logical errors, and improves noise tolerance. The analysis also identifies challenges and outlines the future research direction aimed at achieving efficient and scalable fault tolerant quantum circuits.
Quantum systems operate using quantum bits (qubits), which are highly sensitive to external noises and disturbances and they are easily prone to errors. In the Noisy Intermediate-Scale Quantum (NISQ) era, these errors make difficult to build reliable, fault tolerant quantum circuits for real world deployment. This work provides an overview of need for Quantum Error Correction (QEC) in NISQ devices, as qubits commonly get affected by bit-flip, phase-flip, and combined errors that degrades system performance and examines Quantum Error Correction Code (QECC) techniques usage in communication, computation, and quantum multimedia applications such as image and video transmission. In addition, a simple three-qubit repetition circuit is introduced to demonstrate an error-mitigation approach. These findings, also show how QEC improves fidelity, reduces logical errors, and improves noise tolerance. The analysis also identifies challenges and outlines the future research direction aimed at achieving efficient and scalable fault tolerant quantum circuits.
Quantum effect enables enhanced estimation precision in metrology, with the Heisenberg limit (HL) representing the ultimate limit allowed by quantum mechanics. Although the HL is generally unattainable in the presence of noise, quantum error correction (QEC) can recover the HL in various scenarios. A notable example is estimating a Pauli-Z signal under bit-flip noise using the repetition code, which is both optimal for metrology and robust against noise. However, previous protocols often assume noise affects only the signal accumulation step, while the QEC operations -- including state preparation and measurement -- are noiseless. To overcome this limitation, we study fault-tolerant quantum metrology where all qubit operations are subject to noise. We focus on estimating a Pauli-Z signal under bit-flip noise, together with state preparation and measurement errors in all QEC operations. We propose a fault-tolerant metrological protocol where a repetition code is prepared via repeated syndrome measurements, followed by a fault-tolerant logical measurement. We demonstrate the existence of an error threshold, below which errors are effectively suppressed and the HL is attained.
A major obstacle towards realizing a practical quantum computer is the noise that arises due to system-environment interactions. While it is very well known that quantum error correction (QEC) provides a way to protect against errors that arise due to the noise affecting the system, a perfect quantum code requires atleast five physical qubits to observe a noticeable improvement over the no-QEC scenario. However, in cases where the noise structure in the system is already known, it might be more useful to consider quantum codes that are adapted to specific noise models. It is already known in the literature that such codes are resource efficient and perform on par with the standard codes. In this spirit, we address the following questions concerning such adaptive quantum codes in this thesis. (a) Construction: Given a noise model, we propose a simple and fast numerical optimization algorithm to search for good quantum codes. (b) Application: As a simple application of noise-adapted codes, we propose an adaptive QEC protocol that allows transmission of quantum information from one site to the other over a 1-d spin chain with high fidelity. (c) Fault-tolerance: Finally, we address the question of whether such noise-adapted QEC protocols can be made fault-tolerant starting with a [[4,1]] code and obtain a rigorous lower bound on threshold.
Fault-tolerant quantum error correction (QEC) networks are studied by a combination of numerical and approximate analytical treatments. The probability of failure of the recovery operation is calculated for a variety of Calderbank-Shor-Steane codes, including large block codes and concatenated codes. Recent insights into the syndrome extraction process, which render the whole process more efficient and more noise tolerant, are incorporated. The average number of recoveries that can be completed without failure is thus estimated as a function of various parameters. The main parameters are the gate $\ensuremath{\gamma}$ and memory $\ensuremath{\epsilon}$ failure rates, the physical scale-up of the computer size, and the time tm required for measurements and classical processing. The achievable computation size is given as a surface in parameter space. This indicates the noise threshold as well as other information. It is found that concatenated codes based on the [[23,1,7]] Golay code give higher thresholds than those based on the [[7,1,3]] Hamming code under most conditions. The threshold gate noise ${\ensuremath{\gamma}}_{0}$ is a function of $\ensuremath{\epsilon}/\ensuremath{\gamma}$ and tm; example values are ${\ensuremath{\epsilon}/\ensuremath{\gamma}{,t}_{m},{\ensuremath{\gamma}}_{0}}={{1,1,10}^{\ensuremath{-}3}},$ ${0.01,1,3\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}3}},$ ${{1,100,10}^{\ensuremath{-}4}},$ ${0.01,100,2\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}3}},$ assuming zero cost for information transport. This represents an order of magnitude increase in tolerated memory noise, compared with previous calculations, which is made possible by recent insights into the fault-tolerant QEC process.
Quantum error correction (QEC) is essential for realizing scalable quantum computation. However, when evaluating its benefits, most analyses assume idealized components, overlooking the imperfections inherent in realistic fault-tolerant (FT) implementations. In this paper, we investigate the performance of QEC schemes taking into account that quantum gates and measurements are themselves error-prone. We derive bounds for the failure probability of Shor-style FT-QEC schemes using limited structural information, such as the number of flag qubits and quantum gates. Our analysis separates and quantifies two key contributors to the failure rate: decoding errors and residual errors arising from circuit-level faults. The derived bounds highlight fundamental limitations in Shor-style FT-QEC performance and quantify how circuit imperfections degrade error correction capabilities, under the assumption of depolarizing noise.