We propose an approach to reconstruct any superconducting charge qubit state by using quantum state tomography. This procedure requires a series of measurements on a large enough number of identically prepared copies of the quantum system. The experimental feasibility of this procedure is explained and the time scales for different quantum operations are estimated according to experimentally accessible parameters. Based on the state tomography, we also investigate the possibility of the process tomography.
We propose an approach to reconstruct any superconducting charge qubit state by using quantum state tomography. This procedure requires a series of measurements on a large enough number of identically prepared copies of the quantum system. The experimental feasibility of this procedure is explained and the time scales for different quantum operations are estimated according to experimentally accessible parameters. Based on the state tomography, we also investigate the possibility of the process tomography.
In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is not so practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multiqubit quantum states. Furthermore, it was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternative effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.
Quantum state tomography is the experimental procedure of determining an unknown state. It is not only essential for the verification of resources and processors of quantum information but is also important in its own right with regard to the foundation of quantum mechanics. Standard methods have been elusive for large systems because of the enormous number of observables to be measured and the exponential complexity of data post-processing. Here, we propose a new scheme of quantum state tomography that requires the measurement of only three observables (acting jointly on the system and pointer) regardless of the size of the system. The system is coupled to a "pointer" of single qubit, and the wavefunction of the system is "reaped" onto the pointer upon the measurement of the system. Subsequently, standard two-state tomography on the pointer and classical post-processing are used to reconstruct the quantum state of the system. We also developed an efficient and scalable iterative maximum likelihood algorithm to estimate states from statistically incomplete data.
Quantum state tomography (QST) via local measurements on reduced density matrices (LQST) is a promising approach but becomes impractical for large systems. To tackle this challenge, we developed an efficient quantum state tomography method inspired by quantum overlapping tomography [Phys. Rev. Lett. 124, 100401 (2020)PRLTAO0031-900710.1103/PhysRevLett.124.100401], which utilizes parallel measurements (PQST). In contrast to LQST, PQST significantly reduces the number of measurements and offers more robustness against shot noise. Experimentally, we demonstrate the feasibility of PQST in a treelike superconducting qubit chip by designing high-efficiency circuits, preparing W states, ground states of Hamiltonians, and random states, and then reconstructing these density matrices using full quantum state tomography (FQST), LQST, and PQST. Our results show that PQST reduces measurement cost, achieving fidelities of 98.68% and 95.07% after measuring 75 and 99 observables for six-qubit and nine-qubit W states, respectively. Furthermore, the reconstruction of the largest density matrix of the 12-qubit W state is achieved with the similarity of 89.23% after just measuring 243 parallel observables, while 3^{12}=531 441 complete observables are needed for FQST. Consequently, PQST will be a useful tool for future tasks such as the reconstruction, characterization, benchmarking, and properties learning of states.
Full characterization of quantum states and processes is a fundamental requirement for verification and benchmarking of quantum devices. It has been realized in systems with few components, but for larger systems it becomes unfeasible because of the exponential growing with the system size of the number of measurements and the amount of computational power required to process them. A new approach for quantum state tomography and quantum process tomography, requiring a limited number of measurements, has been recently introduced by Maciel et al. [Quantum Inf. Comput. 12, 0442 (2012); Int. J. Mod. Phys. C 22, 1361 (2011).], namely variational quantum-process tomography (VQT). Here we adopt the VQT approach for the experimental characterization of two-qubit quantum processes and compare the reconstructed maps with those obtained by standard tomographic methods. The results demonstrate the high performance of this approach and propose VQT as a powerful alternative to the standard quantum process tomography.
It is a challenge to identify the quantum state with high fidelity as the quantum system size becomes large. The larger system size requires more parameters to be calculated and hence more measurement and more time. For example, 16 and 64 parameters are needed to express two and three qubit state in density matrix, respectively. Here each parameter is determined by the quantum state tomography (QST) after the initial state is prepared by performing simple single gate operations and/or two qubit CNOT gate. This enables us to determine the state fidelity of the given state preparation.
We present a novel method for performing quantum state tomography for many-particle systems, which are particularly suitable for estimating the states in lattice systems such as of ultra-cold atoms in optical lattices. We show that the need to measure a tomographically complete set of observables can be overcome by letting the state evolve under some suitably chosen random circuits followed by the measurement of a single observable. We generalize known results about the approximation of unitary two-designs, i.e. certain classes of random unitary matrices, by random quantum circuits and connect our findings to the theory of quantum compressed sensing. We show that for ultra-cold atoms in optical lattices established experimental techniques such as optical super-lattices, laser speckles and time-of-flight measurements are sufficient to perform fully certified, assumption-free tomography. This is possible without the need to address single sites in any step of the procedure. Combining our approach with tensor network methods—in particular, the theory of matrix product states—we identify situations where the effort of reconstruction is even constant in the number of lattice sites, allowing, in principle, to perform tomography on large-scale systems readily available in present experiments.