Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:quant-ph/0209008 · physica status solidi (b)

Oxide-Semiconductor Materials for Quantum Computation

Jeremy Levy

Published Oct 1, 2002• 8 citations
arXivHTMLPDF

Abstract

Scalable fault-tolerant quantum computer architectures require quantum gates that operate within a small fraction of the qubit decoherence time and with high accuracy over a bandwidth set by the decoherence rate. Electron spin quantum bits in Si are promising because of long decoherence times (∼0.5 ms), but electrical gating schemes still seem problematic. Oxide–semiconductor heterostructures have the potential for precise electrical control of gate operations in the semiconductor, using optical rectification in the ferroelectric oxide. Accurate (∼80 dB), local (∼10 nm), dynamic (>THz) and programmable optical control over electric polarization in the ferroelectric can be achieved using existing technology. Optical techniques may also be useful in rapid initialization of the quantum computer, and for providing a source of initialized qubits to use for quantum error correction. Advantages of optical methods will be discussed within a framework proposed for a quantum information processor using ferroelectrically coupled electron spins and Ge quantum dots in Si.

DOI
10.1002/1521-3951(200210)233:3<467::aid-pssb467>3.0.co;2-3

Related papers

Quantum-information processing with ferroelectrically coupled quantum dots

Jeremy Levy

A proposal is described to construct a quantum-information processor using ferroelectrically coupled Ge/Si quantum dots. The spin of single electrons form the fundamental qubits. Small-diameter (10 nm) Ge quantum dots are optically excited to create spin-polarized electrons in Si. The static polarization of an epitaxial ferroelectric thin film confines electrons laterally in the semiconductor; spin interactions between nearest-neighbor electrons are mediated by the nonlinear process of optical rectification. Single-qubit operations are achieved through ``g-factor engineering'' in the Ge/Si structures; spin-spin interactions occur through Heisenberg exchange, controlled by ferroelectric gates. A method for reading out the final state, while required for quantum computing, is not described; approaches involving single-electron transistors may prove fruitful in satisfying this requirement.

arXiv:quant-ph/0101026•Physical Review A•Oct 10, 2001•105 citations

Silicon CMOS architecture for a spin-based quantum computer

Menno Veldhorst, H. G. J. Eenink, C. H. Yang +1 more

Recent advances in quantum error correction codes for fault-tolerant quantum computing and physical realizations of high-fidelity qubits in multiple platforms give promise for the construction of a quantum computer based on millions of interacting qubits. However, the classical-quantum interface remains a nascent field of exploration. Here, we propose an architecture for a silicon-based quantum computer processor based on complementary metal-oxide-semiconductor (CMOS) technology. We show how a transistor-based control circuit together with charge-storage electrodes can be used to operate a dense and scalable two-dimensional qubit system. The qubits are defined by the spin state of a single electron confined in quantum dots, coupled via exchange interactions, controlled using a microwave cavity, and measured via gate-based dispersive readout. We implement a spin qubit surface code, showing the prospects for universal quantum computation. We discuss the challenges and focus areas that need to be addressed, providing a path for large-scale quantum computing.

arXiv:1609.09700•Nature Communications•Nov 20, 2017•442 citations

Hot qubits in silicon for quantum computation

H. G. J. Eenink

The understanding of quantum mechanics enabled the development of technology such as transistors and has been the foundation of today’s information age. Actively using quantum mechanics to build quantum technology may cause a second revolution in handling information. However, to execute meaningful algorithms, largescale quantum computers have to be built. Such systems are constructed from many qubits, the quantum version of the classical bit. While exciting progress is being made across a range of different qubit platforms, achieving the radical scalability that is necessary to build a largescale processor could be a roadblock. Huge challenges are put on reproducibility, inand output connectivity and material quality. Qubits based on the spins of electrons and holes confined in semiconductor quantum dots may have an important advantage in constructing quantum processors. This platform can profit from the advanced semiconductor industry that was responsible for the first computing revolution. Group IV semiconductors such as silicon and germanium have a high compatibility with industrial semiconductor manufacturing and contain stable isotopes with zero nuclear spin. The materials can be isotopically purified and serve as excellent hosts for spins with long quantum coherence. In Chapter 3 we present quantum dot arrays in silicon metaloxidesemiconductor (SiMOS), strained silicon (Si/SiGe) and strained germanium (Ge/SiGe). A nearly identical integration scheme based on an overlapping gate structure can be used to define quantum dots in each platform. Each platform has its own opportunities, which are carefully assessed. By employing charge sensing we confirm that all quantum dots can be depleted to the singleelectron regime. We compare capacitive crosstalk and find it to be the smallest in SiMOS, relevant for the tuning of quantum dot arrays. Using this crossplatform integration, we can study qubits in each platform with minimal overhead. Long coherence times, excellent singlequbit gate fidelities and twoqubit logic have been demonstrated with SiMOS spin qubits, making it one of the leading platforms for quantum information processing. However, due to the high disorder at the Si/SiO2 interface compared to Ge/SiGe and Si/SiGe interface, quantum dots defined in SiMOS are small and achieving sufficient control over single electrons has been a long standing challenge. In Chapter 5 we show experiments on a double quantum dot that can be isolated from its reservoir. We demonstrate a tunable tunnel coupling between single electrons up to 13 GHz and tunable tunnel rates down to below 1 Hz. These results mark an important step towards the required degree of control over the location of and coupling between quantum dots, necessary for the operation of a large array.

•Aug 31, 2021•2 citations

Oxides: An answer to the qubit problem?

Amit Dey, Sudhakar Yarlagadda

Low-dimensional complex oxides offer new opportunities for small-scale electronic devices where diverse spin, charge and orbital correlations can be suitably adapted by manipulating many-body interactions, geometries, disorder, fields, strain, etc. Therefore, oxides may be viewed as one of the promising candidates for replacing semiconductors in future devices. Maintaining coherence and control in a qubit is an important necessity for quantum computation. In this review, we discuss an example of oxide devices: decoherence-free oxide-based qubits. We present recent progress in demonstrating that long coherence times can be achieved at easily accessible temperatures in charge qubits of oxide double quantum dots. For treating strong coupling to the environment, we describe a nonperturbative approach that is useful for oxides. We illustrate ways to enhance the coherence times: increasing the electron–phonon coupling, detuning the dots to a fraction of the optical phonon energy, decreasing the temperature or reducing the adiabaticity.

International Journal of Modern Physics B•May 31, 2019•3 citations

Semiconductor quantum computation

Xin Zhang, Hai-Ou Li, Gang Cao +3 more

Semiconductors, a significant type of material in the information era, are becoming more and more powerful in the field of quantum information. In recent decades, semiconductor quantum computation was investigated thoroughly across the world and developed with a dramatically fast speed. The research varied from initialization, control and readout of qubits, to the architecture of fault-tolerant quantum computing. Here, we first introduce the basic ideas for quantum computing, and then discuss the developments of single- and two-qubit gate control in semiconductors. Up to now, the qubit initialization, control and readout can be realized with relatively high fidelity and a programmable two-qubit quantum processor has even been demonstrated. However, to further improve the qubit quality and scale it up, there are still some challenges to resolve such as the improvement of the readout method, material development and scalable designs. We discuss these issues and introduce the forefronts of progress. Finally, considering the positive trend of the research on semiconductor quantum devices and recent theoretical work on the applications of quantum computation, we anticipate that semiconductor quantum computation may develop fast and will have a huge impact on our lives in the near future.

arXiv:1905.01592•National Science Review•Dec 21, 2018•191 citations

Semiconductor Circuits for Quantum Computing with Electronic Wave Packets

David Pomaranski, Ito, Ryo, Ngoc Han Tu +7 more

Standard approaches to quantum computing require significant overhead to correct for errors. The hardware size for conventional quantum processors in solids often increases linearly with the number of physical qubits, such as for transmon qubits in superconducting circuits or electron spin qubits in quantum dot arrays. While photonic circuits based on flying qubits do not suffer from decoherence or lack of potential scalability, they have encountered significant challenges to overcome photon loss in long delay circuits. Here, we propose an alternative approach that utilizes flying electronic wave packets propagating in solid-state quantum semiconductor circuits. Using a novel time-bin architecture for the electronic wave packets, hardware requirements are drastically reduced because qubits can be created on-demand and manipulated with a common hardware element, unlike the localized approach of wiring each qubit individually. The electronic Coulomb interaction enables reliable coupling and readout of qubits. Improving upon previous devices, we realize electronic interference at the level of a single quantized mode that can be used for manipulation of electronic wavepackets. This important landmark lays the foundation for fault-tolerant quantum computing with a compact and scalable architecture based on electron interferometry in semiconductors.

arXiv:2410.16244•Oct 21, 2024•5 citations
Scalable fault-tolerant quantum computer architectures require quantum gates that operate within a small fraction of the qubit decoherence time and with high accuracy over a bandwidth set by the decoherence rate. Electron spin quantum bits in Si are promising because of long decoherence times (∼0.5 ms), but electrical gating schemes still seem problematic. Oxide–semiconductor heterostructures have the potential for precise electrical control of gate operations in the semiconductor, using optical rectification in the ferroelectric oxide. Accurate (∼80 dB), local (∼10 nm), dynamic (>THz) and programmable optical control over electric polarization in the ferroelectric can be achieved using existing technology. Optical techniques may also be useful in rapid initialization of the quantum computer, and for providing a source of initialized qubits to use for quantum error correction. Advantages of optical methods will be discussed within a framework proposed for a quantum information processor using ferroelectrically coupled electron spins and Ge quantum dots in Si.
A proposal is described to construct a quantum-information processor using ferroelectrically coupled Ge/Si quantum dots. The spin of single electrons form the fundamental qubits. Small-diameter (10 nm) Ge quantum dots are optically excited to create spin-polarized electrons in Si. The static polarization of an epitaxial ferroelectric thin film confines electrons laterally in the semiconductor; spin interactions between nearest-neighbor electrons are mediated by the nonlinear process of optical rectification. Single-qubit operations are achieved through ``g-factor engineering'' in the Ge/Si structures; spin-spin interactions occur through Heisenberg exchange, controlled by ferroelectric gates. A method for reading out the final state, while required for quantum computing, is not described; approaches involving single-electron transistors may prove fruitful in satisfying this requirement.
Recent advances in quantum error correction codes for fault-tolerant quantum computing and physical realizations of high-fidelity qubits in multiple platforms give promise for the construction of a quantum computer based on millions of interacting qubits. However, the classical-quantum interface remains a nascent field of exploration. Here, we propose an architecture for a silicon-based quantum computer processor based on complementary metal-oxide-semiconductor (CMOS) technology. We show how a transistor-based control circuit together with charge-storage electrodes can be used to operate a dense and scalable two-dimensional qubit system. The qubits are defined by the spin state of a single electron confined in quantum dots, coupled via exchange interactions, controlled using a microwave cavity, and measured via gate-based dispersive readout. We implement a spin qubit surface code, showing the prospects for universal quantum computation. We discuss the challenges and focus areas that need to be addressed, providing a path for large-scale quantum computing.
The understanding of quantum mechanics enabled the development of technology such as transistors and has been the foundation of today’s information age. Actively using quantum mechanics to build quantum technology may cause a second revolution in handling information. However, to execute meaningful algorithms, largescale quantum computers have to be built. Such systems are constructed from many qubits, the quantum version of the classical bit. While exciting progress is being made across a range of different qubit platforms, achieving the radical scalability that is necessary to build a largescale processor could be a roadblock. Huge challenges are put on reproducibility, inand output connectivity and material quality. Qubits based on the spins of electrons and holes confined in semiconductor quantum dots may have an important advantage in constructing quantum processors. This platform can profit from the advanced semiconductor industry that was responsible for the first computing revolution. Group IV semiconductors such as silicon and germanium have a high compatibility with industrial semiconductor manufacturing and contain stable isotopes with zero nuclear spin. The materials can be isotopically purified and serve as excellent hosts for spins with long quantum coherence. In Chapter 3 we present quantum dot arrays in silicon metaloxidesemiconductor (SiMOS), strained silicon (Si/SiGe) and strained germanium (Ge/SiGe). A nearly identical integration scheme based on an overlapping gate structure can be used to define quantum dots in each platform. Each platform has its own opportunities, which are carefully assessed. By employing charge sensing we confirm that all quantum dots can be depleted to the singleelectron regime. We compare capacitive crosstalk and find it to be the smallest in SiMOS, relevant for the tuning of quantum dot arrays. Using this crossplatform integration, we can study qubits in each platform with minimal overhead. Long coherence times, excellent singlequbit gate fidelities and twoqubit logic have been demonstrated with SiMOS spin qubits, making it one of the leading platforms for quantum information processing. However, due to the high disorder at the Si/SiO2 interface compared to Ge/SiGe and Si/SiGe interface, quantum dots defined in SiMOS are small and achieving sufficient control over single electrons has been a long standing challenge. In Chapter 5 we show experiments on a double quantum dot that can be isolated from its reservoir. We demonstrate a tunable tunnel coupling between single electrons up to 13 GHz and tunable tunnel rates down to below 1 Hz. These results mark an important step towards the required degree of control over the location of and coupling between quantum dots, necessary for the operation of a large array.
Low-dimensional complex oxides offer new opportunities for small-scale electronic devices where diverse spin, charge and orbital correlations can be suitably adapted by manipulating many-body interactions, geometries, disorder, fields, strain, etc. Therefore, oxides may be viewed as one of the promising candidates for replacing semiconductors in future devices. Maintaining coherence and control in a qubit is an important necessity for quantum computation. In this review, we discuss an example of oxide devices: decoherence-free oxide-based qubits. We present recent progress in demonstrating that long coherence times can be achieved at easily accessible temperatures in charge qubits of oxide double quantum dots. For treating strong coupling to the environment, we describe a nonperturbative approach that is useful for oxides. We illustrate ways to enhance the coherence times: increasing the electron–phonon coupling, detuning the dots to a fraction of the optical phonon energy, decreasing the temperature or reducing the adiabaticity.
Semiconductors, a significant type of material in the information era, are becoming more and more powerful in the field of quantum information. In recent decades, semiconductor quantum computation was investigated thoroughly across the world and developed with a dramatically fast speed. The research varied from initialization, control and readout of qubits, to the architecture of fault-tolerant quantum computing. Here, we first introduce the basic ideas for quantum computing, and then discuss the developments of single- and two-qubit gate control in semiconductors. Up to now, the qubit initialization, control and readout can be realized with relatively high fidelity and a programmable two-qubit quantum processor has even been demonstrated. However, to further improve the qubit quality and scale it up, there are still some challenges to resolve such as the improvement of the readout method, material development and scalable designs. We discuss these issues and introduce the forefronts of progress. Finally, considering the positive trend of the research on semiconductor quantum devices and recent theoretical work on the applications of quantum computation, we anticipate that semiconductor quantum computation may develop fast and will have a huge impact on our lives in the near future.
Standard approaches to quantum computing require significant overhead to correct for errors. The hardware size for conventional quantum processors in solids often increases linearly with the number of physical qubits, such as for transmon qubits in superconducting circuits or electron spin qubits in quantum dot arrays. While photonic circuits based on flying qubits do not suffer from decoherence or lack of potential scalability, they have encountered significant challenges to overcome photon loss in long delay circuits. Here, we propose an alternative approach that utilizes flying electronic wave packets propagating in solid-state quantum semiconductor circuits. Using a novel time-bin architecture for the electronic wave packets, hardware requirements are drastically reduced because qubits can be created on-demand and manipulated with a common hardware element, unlike the localized approach of wiring each qubit individually. The electronic Coulomb interaction enables reliable coupling and readout of qubits. Improving upon previous devices, we realize electronic interference at the level of a single quantized mode that can be used for manipulation of electronic wavepackets. This important landmark lays the foundation for fault-tolerant quantum computing with a compact and scalable architecture based on electron interferometry in semiconductors.