Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:quant-ph/0005038

Heating of trapped particles close to surfaces - Blackbody and beyond

Carsten Henkel, Martin Wilkens

Published May 10, 2000• 2 citations
arXivHTMLPDF

Abstract

We discuss heating and decoherence in traps for ions and neutral particles close to metallic surfaces. We focus on simple trap geometries and compute noise spectra of thermally excited electromagnetic fields. If the trap is located in the near field of the substrate, the field fluctuations are largely increased compared to the level of the blackbody field, leading to much shorter coherence and life times of the trapped atoms. The corresponding time constants are computed for ion traps and magnetic traps. Analytical estimates for the size dependence of the noise spectrum are given. We finally discuss prospects for the coherent transport of matter waves in integrated surface waveguides.

DOI
10.48550/arxiv.quant-ph/0005038

Related papers

Heating of trapped atoms near thermal surfaces

Carsten Henkel, Martin Wilkens

We study the electromagnetic coupling and concomitant heating of a particle in a miniaturized trap close to a solid surface. Two dominant heating mechanisms are identified: proximity fields generated by thermally excited currents in the absorbing solid and time-dependent image potentials due to elastic surface distortions (Rayleigh phonons). Estimates for the lifetime of the trap ground state are given. Ions are particularly sensitive to electric proximity fields: for a silver substrate, we find a lifetime below one second at distances closer than some ten μm to the surface. Neutral atoms may approach the surface more closely: if they have a magnetic moment, a minimum distance of one μm is estimated in tight traps, the heat being transferred via magnetic proximity fields. For spinless atoms, heat is transferred by inelastic scattering of virtual photons off surface phonons. The corresponding lifetime, however, is estimated to be extremely long compared to the timescale of typical experiments.

arXiv:quant-ph/9902009•Europhysics Letters (EPL)•Aug 15, 1999•110 citations

Microscopic model of electric-field-noise heating in ion traps

Arghavan Safavi-Naini, Peter Rabl, Philippe F. Weck +1 more

Motional heating of ions in microfabricated traps is one of the open challenges hindering experimental realizations of large-scale quantum processing devices. Recently, a series of measurements of the heating rates in surface-electrode ion traps characterized their frequency, distance, and temperature dependencies, but our understanding of the microscopic origin of this noise remains incomplete. In this work we develop a theoretical model for the electric field noise which is associated with a random distribution of adsorbed atoms on the trap electrode surface. By using first-principles calculations of the fluctuating dipole moments of the adsorbed atoms we evaluate the distance, frequency, and temperature dependence of the resulting electric field fluctuation spectrum. Our theory reproduces correctly the ${d}^{\ensuremath{-}4}$ dependence with distance of the ion from the electrode surface and calculates the noise spectrum beyond the standard scenario of two-level fluctuators by incorporating all the relevant vibrational states. Our model predicts a regime of $1/f$ noise which commences at roughly the frequency of the fundamental phonon transition rate and a thermally activated noise spectrum which for higher temperatures exhibits a crossover as a function of frequency.

arXiv:1106.1949•Physical Review A•Aug 22, 2011•91 citations

Interaction of Atoms, Ions, and Molecules with Surfaces

Carsten Henkel

It is quite remarkable that atoms (and molecules or ions) can actually be trapped near the solid surface of an atom chip, at distances of a few micrometers. This chapter reviews the progress made within the last decade for calculating and detecting neutral atom- surface interactions in atom chips. It discusses results obtained for charged particles in front of a solid surface, which are of relevance for ion chips. The chapter focuses on metallic surfaces, as these are often used for producing magnetic traps. It outlines a convenient way to calculate the electromagnetic noise spectrum at thermal equilibrium, using Green function techniques. The chapter provides a few formulas for field spectra and Green tensors at a planar surface. Atom-surface interactions have also been studied in recent years for non-equilibrium situations. The chapter also focuses on transitions between atomic states that are induced by the presence of the atom chip surface. Controlled Vocabulary Terms electromagnetic interference; Green’ s function methods; plasma-wall interactions

Wiley eBooks•Feb 9, 2011•1 citation

Implications of surface noise for the motional coherence of trapped ions

Ishan Talukdar, Dylan J Gorman, Nikos Daniilidis +5 more

Electric noise from metallic surfaces is a major obstacle towards quantum applications with trapped ions due to motional heating of the ions. Here, we discuss how the same noise source can also lead to pure dephasing of motional quantum states. The mechanism is particularly relevant at small ion-surface distances, thus imposing a constraint on trap miniaturization. By means of a free induction decay experiment, we measure the dephasing time of the motion of a single ion trapped 50 $\ensuremath{\mu}\mathrm{m}$ above a Cu-Al surface. From the dephasing times we extract the integrated noise below the secular frequency of the ion. We find that none of the most commonly discussed surface noise models for ion traps describes both the observed heating as well as the measured dephasing satisfactorily. Thus, our measurements provide a benchmark for future models for the electric noise emitted by metallic surfaces.

arXiv:1511.04819•Physical Review A•Apr 20, 2016•29 citations

Thermalization of trapped ions: A quantum perturbation approach

S. K. Lamoreaux

The rate at which external random thermal fluctuations drive transitions between, and cause decoherence of, the near ground vibrational (harmonic oscillator) quantum states of trapped cold ions is of crucial importance in relation to quantum computing. Presented here is an estimate of these rates, for a single trapped ion, based on a quantum perturbation approach where an external thermal energy reservoir is electrically coupled to the ion. The results are for a general system, and it is shown that the relevant parameter in the interpretation of experimentally observed heating rates is the correlation time of the fluctuations. The rates due to the fluctuating electric field associated with blackbody radiation are also considered and shown to be negligible.

Physical Review A•Dec 1, 1997•42 citations

Electric-field noise from thermally activated fluctuators in a surface ion trap

Crystal Noel, Maya Berlin-Udi, Clemens Matthiesen +4 more

We probe electric-field noise near the metal surface of an ion-trap chip in the temperature range from 295 to 530 K. We observe a nontrivial temperature dependence with the noise amplitude at 1 MHz frequency saturating around 500 K. Measurements of the noise spectrum reveal a $1/{f}^{\ensuremath{\alpha}\ensuremath{\approx}1}$ dependence and a small decrease in $\ensuremath{\alpha}$ between low and high temperatures. This behavior can be explained by considering noise from a distribution of thermally activated two-level fluctuators with activation energies between 0.35 and 0.65 eV. Processes in this energy range may be relevant to understanding electric-field noise in ion traps; for example, defect motion in the solid state and surface adsorbate binding energies. The study of these processes may aid in identification of the origin of excess electric-field noise in ion traps---a major source of ion motional decoherence limiting the performance of surface traps as quantum devices.

arXiv:1809.05624•Physical Review A•Jun 26, 2019•40 citations
We discuss heating and decoherence in traps for ions and neutral particles close to metallic surfaces. We focus on simple trap geometries and compute noise spectra of thermally excited electromagnetic fields. If the trap is located in the near field of the substrate, the field fluctuations are largely increased compared to the level of the blackbody field, leading to much shorter coherence and life times of the trapped atoms. The corresponding time constants are computed for ion traps and magnetic traps. Analytical estimates for the size dependence of the noise spectrum are given. We finally discuss prospects for the coherent transport of matter waves in integrated surface waveguides.
We study the electromagnetic coupling and concomitant heating of a particle in a miniaturized trap close to a solid surface. Two dominant heating mechanisms are identified: proximity fields generated by thermally excited currents in the absorbing solid and time-dependent image potentials due to elastic surface distortions (Rayleigh phonons). Estimates for the lifetime of the trap ground state are given. Ions are particularly sensitive to electric proximity fields: for a silver substrate, we find a lifetime below one second at distances closer than some ten μm to the surface. Neutral atoms may approach the surface more closely: if they have a magnetic moment, a minimum distance of one μm is estimated in tight traps, the heat being transferred via magnetic proximity fields. For spinless atoms, heat is transferred by inelastic scattering of virtual photons off surface phonons. The corresponding lifetime, however, is estimated to be extremely long compared to the timescale of typical experiments.
Motional heating of ions in microfabricated traps is one of the open challenges hindering experimental realizations of large-scale quantum processing devices. Recently, a series of measurements of the heating rates in surface-electrode ion traps characterized their frequency, distance, and temperature dependencies, but our understanding of the microscopic origin of this noise remains incomplete. In this work we develop a theoretical model for the electric field noise which is associated with a random distribution of adsorbed atoms on the trap electrode surface. By using first-principles calculations of the fluctuating dipole moments of the adsorbed atoms we evaluate the distance, frequency, and temperature dependence of the resulting electric field fluctuation spectrum. Our theory reproduces correctly the ${d}^{\ensuremath{-}4}$ dependence with distance of the ion from the electrode surface and calculates the noise spectrum beyond the standard scenario of two-level fluctuators by incorporating all the relevant vibrational states. Our model predicts a regime of 1/f1/f1/f noise which commences at roughly the frequency of the fundamental phonon transition rate and a thermally activated noise spectrum which for higher temperatures exhibits a crossover as a function of frequency.
It is quite remarkable that atoms (and molecules or ions) can actually be trapped near the solid surface of an atom chip, at distances of a few micrometers. This chapter reviews the progress made within the last decade for calculating and detecting neutral atom- surface interactions in atom chips. It discusses results obtained for charged particles in front of a solid surface, which are of relevance for ion chips. The chapter focuses on metallic surfaces, as these are often used for producing magnetic traps. It outlines a convenient way to calculate the electromagnetic noise spectrum at thermal equilibrium, using Green function techniques. The chapter provides a few formulas for field spectra and Green tensors at a planar surface. Atom-surface interactions have also been studied in recent years for non-equilibrium situations. The chapter also focuses on transitions between atomic states that are induced by the presence of the atom chip surface. Controlled Vocabulary Terms electromagnetic interference; Green’ s function methods; plasma-wall interactions
Electric noise from metallic surfaces is a major obstacle towards quantum applications with trapped ions due to motional heating of the ions. Here, we discuss how the same noise source can also lead to pure dephasing of motional quantum states. The mechanism is particularly relevant at small ion-surface distances, thus imposing a constraint on trap miniaturization. By means of a free induction decay experiment, we measure the dephasing time of the motion of a single ion trapped 50 $\ensuremath{\mu}\mathrm{m}$ above a Cu-Al surface. From the dephasing times we extract the integrated noise below the secular frequency of the ion. We find that none of the most commonly discussed surface noise models for ion traps describes both the observed heating as well as the measured dephasing satisfactorily. Thus, our measurements provide a benchmark for future models for the electric noise emitted by metallic surfaces.
The rate at which external random thermal fluctuations drive transitions between, and cause decoherence of, the near ground vibrational (harmonic oscillator) quantum states of trapped cold ions is of crucial importance in relation to quantum computing. Presented here is an estimate of these rates, for a single trapped ion, based on a quantum perturbation approach where an external thermal energy reservoir is electrically coupled to the ion. The results are for a general system, and it is shown that the relevant parameter in the interpretation of experimentally observed heating rates is the correlation time of the fluctuations. The rates due to the fluctuating electric field associated with blackbody radiation are also considered and shown to be negligible.
We probe electric-field noise near the metal surface of an ion-trap chip in the temperature range from 295 to 530 K. We observe a nontrivial temperature dependence with the noise amplitude at 1 MHz frequency saturating around 500 K. Measurements of the noise spectrum reveal a $1/{f}^{\ensuremath{\alpha}\ensuremath{\approx}1}$ dependence and a small decrease in $\ensuremath{\alpha}$ between low and high temperatures. This behavior can be explained by considering noise from a distribution of thermally activated two-level fluctuators with activation energies between 0.35 and 0.65 eV. Processes in this energy range may be relevant to understanding electric-field noise in ion traps; for example, defect motion in the solid state and surface adsorbate binding energies. The study of these processes may aid in identification of the origin of excess electric-field noise in ion traps---a major source of ion motional decoherence limiting the performance of surface traps as quantum devices.