Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:physics/0603255 · Physical Review A

Spin-polarizing cold sodium atoms in a strong magnetic field

K. M. R. van der Stam, Anke Kuijk, R. Meppelink, J. M. M. J. Vogels, P. van der Straten

Published Jun 28, 2006• 12 citations
arXivHTMLPDF

Abstract

The efficiency of evaporative cooling, which is used for the creation of a Bose-Einstein condensate, depends strongly on the number of particles at the start of the evaporation. A high efficiency can be reached by filling the magneto-optical trap with a large number of atoms and subsequently transferring these atoms to the magnetic trap as efficiently as possible. In our case (for sodium) this efficiency is limited to $1∕3$, because the magnetic substates of the $F=1$ state, which is used in the trapping process, are equally populated. This limit can be overcome by spin-polarizing the sample before the transfer. For sodium atoms, however, the improvement is very small when it is done in a small magnetic field due to the large number of optical transitions in combination with the high optical density. In this paper, we describe spin-polarizing sodium atoms in a high magnetic field. The transfer efficiency is increased by a factor of 2. The high magnetic field makes the process also more robust against variations in the magnetic field, the laser frequency, and the polarization of the laser beam.

DOI
10.1103/physreva.73.063412

Related papers

Large atom number Bose-Einstein condensate of sodium

K. M. R. van der Stam, Erik van Ooijen, R. Meppelink +2 more

We describe the setup to create a large Bose-Einstein condensate containing more than 120 x 10(6) atoms. In the experiment a thermal beam is slowed by a Zeeman slower and captured in a dark-spot magneto-optical trap (MOT). A typical dark-spot MOT in our experiments contains 2.0 x 10(10) atoms with a temperature of 320 microK and a density of about 1.0 x 10(11) atoms/cm(3). The sample is spin polarized in a high magnetic field before the atoms are loaded in the magnetic trap. Spin polarizing in a high magnetic field results in an increase in the transfer efficiency by a factor of 2 compared to experiments without spin polarizing. In the magnetic trap the cloud is cooled to degeneracy in 50 s by evaporative cooling. To suppress the three-body losses at the end of the evaporation, the magnetic trap is decompressed in the axial direction.

arXiv:physics/0609028•Review of Scientific Instruments•Jan 1, 2007•71 citations

High-Performance Sodium Bose–Einstein Condensate Apparatus with a Hybrid Trap and Long-Distance Magnetic Transfer

Feng Zhang, Yun Long, Jiang-Ling Yang +3 more

We report on the production of large sodium Bose–Einstein condensates in a hybrid of magnetic quadrupole and optical dipole trap. With an optimized spin-flip Zeeman slower, 2 × 10 10 sodium atoms are captured in the magneto-optical trap (MOT). A long distance magnetic transfer setup moves the cold atom over 46 cm from the MOT chamber to the UHV science chamber, which provides great optical access and long conservative trap lifetime. After evaporative cooling in the hybrid trap, we produce nearly pure condensates of 1 × 10 7 atoms with lifetime of 80 s in the optical dipole trap.

Chinese Physics Letters•Dec 1, 2015•4 citations

A Modified Route to Creating Bose–Einstein Condensates of Sodium Atoms

Kou Matsui, Hiromitsu Imai, Hironobu Yamaoka +3 more

Bose–Einstein condensates of dilute gaseous sodium atoms were achieved by Zeeman slowing, dual-operation magneto-optical trapping (MOT), temporal dark MOT, polarization gradient cooling, direct confinement in a compressed magnetic field and radio-frequency-induced forced evaporative cooling. The dependence of the temperature of the phase transition on the radial curvature of the magnetic field was studied.

Applied Physics Express•Feb 20, 2009•3 citations

Optically plugged quadrupole trap for Bose-Einstein condensates

D. Naik, Chandra Raman

We created sodium Bose-Einstein condensates in an optically plugged quadrupole magnetic trap. A focused, 532-nm laser beam repelled atoms from the coil center where Majorana loss is significant. We produced condensates containing up to $3\ifmmode\times\else\texttimes\fi{}{10}^{7}$ atoms, a factor of 60 improvement over previous work and a number comparable to the best all-magnetic traps, and transferred up to $9\ifmmode\times\else\texttimes\fi{}{10}^{6}$ atoms into a purely optical trap. We compare our observations with a simple model of evaporative cooling, concluding that a laser in the range of 1 W (rather than 5 W) may suffice.

arXiv:cond-mat/0406341•Physical Review A•Mar 14, 2005•49 citations

Optimized evaporative cooling for sodium Bose-Einstein condensation against three-body loss

Takahiko Shobu, Hironobu Yamaoka, Hiromitsu Imai +2 more

We report on a highly efficient evaporative cooling optimized experimentally. We successfully created sodium Bose-Einstein condensates with 6.4\ifmmode\times\else\texttimes\fi{}10${}^{7}$ atoms starting from 6.6\ifmmode\times\else\texttimes\fi{}10${}^{9}$ thermal atoms trapped in a magnetic trap by employing a fast linear sweep of radio frequency at the final stage of evaporative cooling so as to overcome the serious three-body losses. The experimental results such as the cooling trajectory and the condensate growth quantitatively agree with the numerical simulations of evaporative cooling on the basis of the kinetic theory of a Bose gas carefully taking into account our specific experimental conditions. We further discuss theoretically a possibility of producing large condensates, more than 10${}^{8}$ sodium atoms, by simply increasing the number of initial thermal trapped atoms and the corresponding optimization of evaporative cooling.

Physical Review A•Sep 20, 2011•9 citations

Bose-Einstein condensates in a large-volume optical trap

Axel Görlitz, T. L. Gustavson, A. E. Leanhardt +7 more

Summary form only given. Bose-Einstein condensates (BEC) are generally produced by evaporative cooling of laser cooled atomic samples in magnetic traps. Though magnetic traps are indispensable for the production of a BEC, they pose restrictions on the possible studies with a BEC. Previous experiments of our group have demonstrated that it is possible to trap a BEC in the circular focus of a far-detuned infrared laser beam. This first realization of an optical dipole trap (ODT) for BEC was used to prepare and investigate spinor condensates of Na atoms in the F=1 hyperfine manifold. However, the initial peak density in this ODT after loading from the magnetic trap reached 10/sup 15/ atoms/cm/sup 3/, leading to rapid losses due to three-body collisions. To realize an ODT capable of storing large condensates for a long time, we have used a laser beam with an elliptical beam profile. The optical trap is loaded by superimposing the light field onto the magnetic trap and then slowly turning off the magnetic fields. The transfer efficiency is close to 100%, and thus more than 10/sup 7/ Bose-condensed atoms can be loaded into the ODT.

Quantum Electronics and Laser Science Conference•Nov 13, 2002•0 citations
The efficiency of evaporative cooling, which is used for the creation of a Bose-Einstein condensate, depends strongly on the number of particles at the start of the evaporation. A high efficiency can be reached by filling the magneto-optical trap with a large number of atoms and subsequently transferring these atoms to the magnetic trap as efficiently as possible. In our case (for sodium) this efficiency is limited to 1∕31∕31∕3, because the magnetic substates of the F=1F=1F=1 state, which is used in the trapping process, are equally populated. This limit can be overcome by spin-polarizing the sample before the transfer. For sodium atoms, however, the improvement is very small when it is done in a small magnetic field due to the large number of optical transitions in combination with the high optical density. In this paper, we describe spin-polarizing sodium atoms in a high magnetic field. The transfer efficiency is increased by a factor of 2. The high magnetic field makes the process also more robust against variations in the magnetic field, the laser frequency, and the polarization of the laser beam.
We describe the setup to create a large Bose-Einstein condensate containing more than 120 x 10(6) atoms. In the experiment a thermal beam is slowed by a Zeeman slower and captured in a dark-spot magneto-optical trap (MOT). A typical dark-spot MOT in our experiments contains 2.0 x 10(10) atoms with a temperature of 320 microK and a density of about 1.0 x 10(11) atoms/cm(3). The sample is spin polarized in a high magnetic field before the atoms are loaded in the magnetic trap. Spin polarizing in a high magnetic field results in an increase in the transfer efficiency by a factor of 2 compared to experiments without spin polarizing. In the magnetic trap the cloud is cooled to degeneracy in 50 s by evaporative cooling. To suppress the three-body losses at the end of the evaporation, the magnetic trap is decompressed in the axial direction.
We report on the production of large sodium Bose–Einstein condensates in a hybrid of magnetic quadrupole and optical dipole trap. With an optimized spin-flip Zeeman slower, 2 × 10 10 sodium atoms are captured in the magneto-optical trap (MOT). A long distance magnetic transfer setup moves the cold atom over 46 cm from the MOT chamber to the UHV science chamber, which provides great optical access and long conservative trap lifetime. After evaporative cooling in the hybrid trap, we produce nearly pure condensates of 1 × 10 7 atoms with lifetime of 80 s in the optical dipole trap.
We created sodium Bose-Einstein condensates in an optically plugged quadrupole magnetic trap. A focused, 532-nm laser beam repelled atoms from the coil center where Majorana loss is significant. We produced condensates containing up to $3\ifmmode\times\else\texttimes\fi{}{10}^{7}$ atoms, a factor of 60 improvement over previous work and a number comparable to the best all-magnetic traps, and transferred up to $9\ifmmode\times\else\texttimes\fi{}{10}^{6}$ atoms into a purely optical trap. We compare our observations with a simple model of evaporative cooling, concluding that a laser in the range of 1 W (rather than 5 W) may suffice.
We report on a highly efficient evaporative cooling optimized experimentally. We successfully created sodium Bose-Einstein condensates with 6.4\ifmmode\times\else\texttimes\fi{}107{}^{7}7 atoms starting from 6.6\ifmmode\times\else\texttimes\fi{}109{}^{9}9 thermal atoms trapped in a magnetic trap by employing a fast linear sweep of radio frequency at the final stage of evaporative cooling so as to overcome the serious three-body losses. The experimental results such as the cooling trajectory and the condensate growth quantitatively agree with the numerical simulations of evaporative cooling on the basis of the kinetic theory of a Bose gas carefully taking into account our specific experimental conditions. We further discuss theoretically a possibility of producing large condensates, more than 108{}^{8}8 sodium atoms, by simply increasing the number of initial thermal trapped atoms and the corresponding optimization of evaporative cooling.
Summary form only given. Bose-Einstein condensates (BEC) are generally produced by evaporative cooling of laser cooled atomic samples in magnetic traps. Though magnetic traps are indispensable for the production of a BEC, they pose restrictions on the possible studies with a BEC. Previous experiments of our group have demonstrated that it is possible to trap a BEC in the circular focus of a far-detuned infrared laser beam. This first realization of an optical dipole trap (ODT) for BEC was used to prepare and investigate spinor condensates of Na atoms in the F=1 hyperfine manifold. However, the initial peak density in this ODT after loading from the magnetic trap reached 10/sup 15/ atoms/cm/sup 3/, leading to rapid losses due to three-body collisions. To realize an ODT capable of storing large condensates for a long time, we have used a laser beam with an elliptical beam profile. The optical trap is loaded by superimposing the light field onto the magnetic trap and then slowly turning off the magnetic fields. The transfer efficiency is close to 100%, and thus more than 10/sup 7/ Bose-condensed atoms can be loaded into the ODT.