Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:physics/0412174

Single-Particle Green Function Approach and Correlated Atomic or Molecular Orbitals

Liqiang Wei

Published Dec 29, 2004• 1 citation
arXivHTMLPDF

Abstract

In this paper, we propose a generic and systematic approach for study of the electronic structure for atoms or molecules. In particular, we address the issue of single particle states, or orbitals, which should be one of the most important aspects of a quantum many-body theory. We argue that the single-particle $\it{Green}$ function provides a most general scheme for generating these single particle states or orbitals. We call them the $\it{correlated}$ atomic or molecular orbitals to make a distinction from those determined from $\it{Hartree-Fock}$ equation. We present the calculation of the single particle properties (i.e., the electron affinities $(EA's)$ and ionization potentials $(IP's)$) for the $H_{2}O$ molecule using the correlated molecular orbitals in the context of quantum chemistry with a second-order self energy. We also calculate the total ground state energy with a single $Slater$ wavefunction determined only from the hole states. Comparisons are made with available experimental data as well as with those from the $\it{Hartree-Fock}$ or density functional theory $(DFT)$ calculations. We conclude that the correlated atomic or molecular orbital approach provides a strictest and most powerful method for studying the single-particle properties of atoms or molecules. It also gives a better total energy than do the $\it{Hartree-Fock}$ and $\it{DFT}$ even at the single $\it{Slater}$ determinant level. It promises that a correlation theory based on the correlated atomic or molecular orbitals will become an approach which possesses the advantages and also overcomes their shortcomings of current quantum chemistry methods based on either the conventional quantum many-body theory or the $DFT$.

DOI
10.48550/arxiv.physics/0412174

Related papers

Ab initioapproach for many-electron systems without invoking orbitals: An integral formulation of density-functional theory

Weitao Yang

A new approach for the calculation of ground states of many-electron systems is proposed via an integral formulation of the Hohenberg-Kohn-Sham density-functional theory. Only equations for the total electron density are involved; orbitals are not employed. Exchange and correlation effects are incorporated. In place of the set of single-electron equations, the total electron density is explicitly expressed in terms of the Kohn-Sham effective local potential through multidimensional integrations. The development is based on the first-order density matrix as obtained from the one-body Green's function in polygonal and Fourier path-integral representations. This might open up the possibility of ab initio calculations for molecules with very many electrons. It also provides explicit solutions to two long-standing problems: electron kinetic energy and momentum density as functionals of the total electron density. The formulation can also be used in calculations for general fermions.

Physical Review A•Dec 1, 1988•19 citations

Combination of many-body and density-functional theories

Dimitri N. Laikov

A framework for developing new approximate electronic structure methods is presented, in which the correlation energy of a many-electron system in the ground state is computed as in the single-reference second-order many-body perturbation theory but with the reference one-body Hamiltonian modified by additional (generally non-local) potentials which are universal functionals of the Hartree-Fock density. The existence of such functionals that reproduce the exact correlation energy justifies the search for approximate models which may overcome some important deficiencies of the traditional density-functional methods and also perform better than the usual low-order wavefunction methods.

arXiv:1106.2744•Jun 14, 2011•0 citations

Treatment of electron-electron correlations in electronic structure calculations

Antonios Gonis, T. C. Schulthess, P. E. A. Turchi +1 more

A methodology is introduced for the systematic treatment of electron-electron correlations in solids and other interacting quantum $N$-particle systems. The method is developed within the framework of electronic structure theory (band theory) but, in contrast to conventional approaches, which are based on the single-particle picture, it is formulated within a many-particle picture in which $n$ particles in $d$-dimensional phase space are treated as a single particle in a phase space of $\mathrm{nd}$ dimensions. In this phase space, interparticle interactions appear as external potentials allowing the treatment of the system of particles through the use of single-particle methods, while at the same time allowing a systematic, direct, and nonperturbative treatment of interparticle interactions. The method makes use of the invariance of the Hamiltonian describing an interacting-particle system under partitioning into subsystems of $n$ particles. This treatment leads to exact results in the limit $n\ensuremath{\rightarrow}N$. Based on such partitioning, we propose a generalization of density functional theory and an appropriately defined local density approximation to treat the interactions between the $n$-particle units in a system of $N>~n$ particles. This approach yields $n$-particle correlated densities and $n$-particle states which can be used in an analysis of the electronic properties of materials, such as total energy, phase stability, electronic transport, and others. We use the formal construct of multiple-scattering theory to develop the method for the calculation of the two-particle electronic structure of a solid and the corresponding total energy of the ground state. We also illustrate some of the properties of the method in terms of a Hubbard model Hamiltonian on a linear ring. Various features of the method and further possible applications are presented in a discussion section.

Physical review. B, Condensed matter•Oct 15, 1997•48 citations

Combining Density Functional Theory and Green’s Function Theory: Range-Separated, Nonlocal, Dynamic, and Orbital-Dependent Hybrid Functional

Alexei A. Kananenka, Dominika Zgid

We present a rigorous framework which combines single-particle Green's function theory with density functional theory based on a separation of electron-electron interactions into short- and long-range components. Short-range contribution to the total energy and exchange-correlation potential is provided by a density functional approximation, while the long-range contribution is calculated using an explicit many-body Green's function method. Such a hybrid results in a nonlocal, dynamic, and orbital-dependent exchange-correlation functional of a single-particle Green's function. In particular, we present a range-separated hybrid functional called srSVWN5-lrGF2 which combines the local-density approximation and the second-order Green's function theory. We illustrate that similarly to density functional approximations, the new functional is weakly basis-set dependent. Furthermore, it offers an improved description of the short-range dynamic correlation. The many-body contribution to the functional mitigates the many-electron self-interaction error present in many density functional approximations and provides a better description of molecular properties. Additionally, we illustrate that the new functional can be used to scale down the self-energy and, therefore, introduce an additional sparsity to the self-energy matrix that in the future can be exploited in calculations for large molecules or periodic systems.

arXiv:1707.00595•Journal of Chemical Theory and Computation•Sep 18, 2017•13 citations

Quantum Theory of Many-Particle Systems. II. Study of the Ordinary Hartree-Fock Approximation

Per‐Olov Löwdin

A system of $N$ antisymmetric particles, moving under the influence of a fixed potential and their mutual many-particle interactions, is investigated in the ordinary Hartree-Fock scheme, having the total wave function approximated by a single Slater determinant. It is shown that all the density matrices of various orders, the wave function, and the entire physical situation depends only on a fundamental invariant $\ensuremath{\rho}({x}_{1}, {x}_{2})$, which is identical with the first-order density matrix. The Hartree-Fock equations are expressed in terms of this quantity.The Hartree-Fock equations are also solved by expanding the eigenfunctions in a given complete set, and applications to the MO-LCAO theory of the electronic structure of molecules, and crystals are given. It is shown that, in this scheme, the entire physical situation depends on a charge- and bond-order matrix $R(\ensuremath{\nu}\ensuremath{\mu})$ with respect to the ordinary atomic spin-orbitals involved. The Hartree-Fock equations for this matrix are investigated.Finally, the ionized and excited states are investigated, and it is shown that the Hartree-Fock scheme has a high degree of physical visuality also in case of many-particle interactions. The excitation energy of the system is the difference (${{\ensuremath{\omega}}_{j}}^{\ensuremath{'}}\ensuremath{-}{\ensuremath{\omega}}_{i}$) between two "spin-orbital energies," being eigenvalues to the effective Hamiltonians associated with the two states under consideration.

Physical Review•Mar 15, 1955•469 citations

Quantum Chemistry in Solid-State Simulations: Gaussian Basis Sets Development and ab-initio Green's Function Based Realistic System Applications

Yanbing Zhou

Understanding emergent many-body phenomena in correlated materials remains one of the grandest challenges in solid-state quantum chemistry calculations. The individuality of electrons diminishes as correlation increases, which leads to the emergence of new features in the system. Seeking to address such problems accurately requires the aid of non-perturbative many-body techniques as well as the corresponding high-quality basis sets. In periodic systems, a given element may be present in different spatial arrangements displaying vastly different physical and chemical properties, and an elemental basis set independent of the physical properties of materials may lead to significant simulation inaccuracies. In fact, with the rapid progress of quantum chemistry methods in condensed-phase simulations, the need for a library of reliable Gaussian basis sets explicitly designed for periodic calculations has become urgent. In the meantime, the development of parameter-free, systematic and reliable quantum chemistry methods for simultaneously treating weak and strong correlations in periodic systems has never stopped. Their ability to treat realistic solid materials needs to be tested, and the obtained results can serve as benchmarks for empirical parameter-guided solid-state calculations. In this thesis, we present numerical studies of various solid-state systems, emphasizing the design and optimization of Gaussian basis sets and assessing the band structure properties of the periodic solid systems. The work begins by introducing the theoretical framework of the electronic structure theory and presenting the fundamentals of a fully self-consistent GW approximation and the self-energy embedding theory (SEET) in Chapters 2 and 3. It continues with a description of the Gaussian basis set optimization scheme we devised for solid-state quantum chemistry calculations. The scheme we present is designed to avoid a lack of material specificity within a given basis set by simultaneously minimizing the total energy of the system and optimizing the band energies when compared to the reference plane wave calculation while accounting for the overlap matrix condition number. We compare the quality of the Gaussian basis sets generated via our method against the existing basis sets. And the optimization scheme is tested to yield improved results. We finally present a quantitative study of electronic properties of realistic materials with the treatment of Green's function based weakly correlated self-consistent GW approximation and the strongly correlated self-energy embedding theory. In the transition metal oxide BiVO3, we found the inaccurate illustration of orbitals including t_{2g} in transition metal Vanadium by DFT. Our calculation shows a systematic trend of DFT failure in illustrating both insulating and metallic solutions, demonstrating the dangers of using DFT when the experimental data is scarce.

•Jan 1, 2022•0 citations
In this paper, we propose a generic and systematic approach for study of the electronic structure for atoms or molecules. In particular, we address the issue of single particle states, or orbitals, which should be one of the most important aspects of a quantum many-body theory. We argue that the single-particle Green\it{Green}Green function provides a most general scheme for generating these single particle states or orbitals. We call them the correlated\it{correlated}correlated atomic or molecular orbitals to make a distinction from those determined from Hartree−Fock\it{Hartree-Fock}Hartree−Fock equation. We present the calculation of the single particle properties (i.e., the electron affinities (EA′s)(EA's)(EA′s) and ionization potentials (IP′s)(IP's)(IP′s)) for the H2OH_{2}OH2​O molecule using the correlated molecular orbitals in the context of quantum chemistry with a second-order self energy. We also calculate the total ground state energy with a single SlaterSlaterSlater wavefunction determined only from the hole states. Comparisons are made with available experimental data as well as with those from the Hartree−Fock\it{Hartree-Fock}Hartree−Fock or density functional theory (DFT)(DFT)(DFT) calculations. We conclude that the correlated atomic or molecular orbital approach provides a strictest and most powerful method for studying the single-particle properties of atoms or molecules. It also gives a better total energy than do the Hartree−Fock\it{Hartree-Fock}Hartree−Fock and DFT\it{DFT}DFT even at the single Slater\it{Slater}Slater determinant level. It promises that a correlation theory based on the correlated atomic or molecular orbitals will become an approach which possesses the advantages and also overcomes their shortcomings of current quantum chemistry methods based on either the conventional quantum many-body theory or the DFTDFTDFT.
A new approach for the calculation of ground states of many-electron systems is proposed via an integral formulation of the Hohenberg-Kohn-Sham density-functional theory. Only equations for the total electron density are involved; orbitals are not employed. Exchange and correlation effects are incorporated. In place of the set of single-electron equations, the total electron density is explicitly expressed in terms of the Kohn-Sham effective local potential through multidimensional integrations. The development is based on the first-order density matrix as obtained from the one-body Green's function in polygonal and Fourier path-integral representations. This might open up the possibility of ab initio calculations for molecules with very many electrons. It also provides explicit solutions to two long-standing problems: electron kinetic energy and momentum density as functionals of the total electron density. The formulation can also be used in calculations for general fermions.
A framework for developing new approximate electronic structure methods is presented, in which the correlation energy of a many-electron system in the ground state is computed as in the single-reference second-order many-body perturbation theory but with the reference one-body Hamiltonian modified by additional (generally non-local) potentials which are universal functionals of the Hartree-Fock density. The existence of such functionals that reproduce the exact correlation energy justifies the search for approximate models which may overcome some important deficiencies of the traditional density-functional methods and also perform better than the usual low-order wavefunction methods.
A methodology is introduced for the systematic treatment of electron-electron correlations in solids and other interacting quantum NNN-particle systems. The method is developed within the framework of electronic structure theory (band theory) but, in contrast to conventional approaches, which are based on the single-particle picture, it is formulated within a many-particle picture in which nnn particles in ddd-dimensional phase space are treated as a single particle in a phase space of nd\mathrm{nd}nd dimensions. In this phase space, interparticle interactions appear as external potentials allowing the treatment of the system of particles through the use of single-particle methods, while at the same time allowing a systematic, direct, and nonperturbative treatment of interparticle interactions. The method makes use of the invariance of the Hamiltonian describing an interacting-particle system under partitioning into subsystems of nnn particles. This treatment leads to exact results in the limit $n\ensuremath{\rightarrow}N$. Based on such partitioning, we propose a generalization of density functional theory and an appropriately defined local density approximation to treat the interactions between the nnn-particle units in a system of N> nN>~nN> n particles. This approach yields nnn-particle correlated densities and nnn-particle states which can be used in an analysis of the electronic properties of materials, such as total energy, phase stability, electronic transport, and others. We use the formal construct of multiple-scattering theory to develop the method for the calculation of the two-particle electronic structure of a solid and the corresponding total energy of the ground state. We also illustrate some of the properties of the method in terms of a Hubbard model Hamiltonian on a linear ring. Various features of the method and further possible applications are presented in a discussion section.
We present a rigorous framework which combines single-particle Green's function theory with density functional theory based on a separation of electron-electron interactions into short- and long-range components. Short-range contribution to the total energy and exchange-correlation potential is provided by a density functional approximation, while the long-range contribution is calculated using an explicit many-body Green's function method. Such a hybrid results in a nonlocal, dynamic, and orbital-dependent exchange-correlation functional of a single-particle Green's function. In particular, we present a range-separated hybrid functional called srSVWN5-lrGF2 which combines the local-density approximation and the second-order Green's function theory. We illustrate that similarly to density functional approximations, the new functional is weakly basis-set dependent. Furthermore, it offers an improved description of the short-range dynamic correlation. The many-body contribution to the functional mitigates the many-electron self-interaction error present in many density functional approximations and provides a better description of molecular properties. Additionally, we illustrate that the new functional can be used to scale down the self-energy and, therefore, introduce an additional sparsity to the self-energy matrix that in the future can be exploited in calculations for large molecules or periodic systems.
A system of NNN antisymmetric particles, moving under the influence of a fixed potential and their mutual many-particle interactions, is investigated in the ordinary Hartree-Fock scheme, having the total wave function approximated by a single Slater determinant. It is shown that all the density matrices of various orders, the wave function, and the entire physical situation depends only on a fundamental invariant $\ensuremath{\rho}({x}_{1}, {x}_{2})$, which is identical with the first-order density matrix. The Hartree-Fock equations are expressed in terms of this quantity.The Hartree-Fock equations are also solved by expanding the eigenfunctions in a given complete set, and applications to the MO-LCAO theory of the electronic structure of molecules, and crystals are given. It is shown that, in this scheme, the entire physical situation depends on a charge- and bond-order matrix $R(\ensuremath{\nu}\ensuremath{\mu})$ with respect to the ordinary atomic spin-orbitals involved. The Hartree-Fock equations for this matrix are investigated.Finally, the ionized and excited states are investigated, and it is shown that the Hartree-Fock scheme has a high degree of physical visuality also in case of many-particle interactions. The excitation energy of the system is the difference (${{\ensuremath{\omega}}_{j}}^{\ensuremath{'}}\ensuremath{-}{\ensuremath{\omega}}_{i}$) between two "spin-orbital energies," being eigenvalues to the effective Hamiltonians associated with the two states under consideration.
Understanding emergent many-body phenomena in correlated materials remains one of the grandest challenges in solid-state quantum chemistry calculations. The individuality of electrons diminishes as correlation increases, which leads to the emergence of new features in the system. Seeking to address such problems accurately requires the aid of non-perturbative many-body techniques as well as the corresponding high-quality basis sets. In periodic systems, a given element may be present in different spatial arrangements displaying vastly different physical and chemical properties, and an elemental basis set independent of the physical properties of materials may lead to significant simulation inaccuracies. In fact, with the rapid progress of quantum chemistry methods in condensed-phase simulations, the need for a library of reliable Gaussian basis sets explicitly designed for periodic calculations has become urgent. In the meantime, the development of parameter-free, systematic and reliable quantum chemistry methods for simultaneously treating weak and strong correlations in periodic systems has never stopped. Their ability to treat realistic solid materials needs to be tested, and the obtained results can serve as benchmarks for empirical parameter-guided solid-state calculations. In this thesis, we present numerical studies of various solid-state systems, emphasizing the design and optimization of Gaussian basis sets and assessing the band structure properties of the periodic solid systems. The work begins by introducing the theoretical framework of the electronic structure theory and presenting the fundamentals of a fully self-consistent GW approximation and the self-energy embedding theory (SEET) in Chapters 2 and 3. It continues with a description of the Gaussian basis set optimization scheme we devised for solid-state quantum chemistry calculations. The scheme we present is designed to avoid a lack of material specificity within a given basis set by simultaneously minimizing the total energy of the system and optimizing the band energies when compared to the reference plane wave calculation while accounting for the overlap matrix condition number. We compare the quality of the Gaussian basis sets generated via our method against the existing basis sets. And the optimization scheme is tested to yield improved results. We finally present a quantitative study of electronic properties of realistic materials with the treatment of Green's function based weakly correlated self-consistent GW approximation and the strongly correlated self-energy embedding theory. In the transition metal oxide BiVO3, we found the inaccurate illustration of orbitals including t_{2g} in transition metal Vanadium by DFT. Our calculation shows a systematic trend of DFT failure in illustrating both insulating and metallic solutions, demonstrating the dangers of using DFT when the experimental data is scarce.