Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:physics/0407040 · Review of Scientific Instruments

High flux source of cold rubidium atoms

Christopher Slowe, L. Vernac, Lene Vestergaard Hau

Published Sep 30, 2005• 52 citations
arXivHTMLPDF

Abstract

We report on the production of a continuous, slow, and cold beam of Rb87 atoms with an extremely high flux of 3.2×1012atoms∕s, a transverse temperature of 3mK, and a longitudinal temperature of 90mK. We describe the apparatus created to generate the atom beam. Hot atoms are emitted from a rubidium candlestick atomic beam source and transversely cooled and collimated by a 20cm long atomic collimator section, boosting overall beam flux by a factor of 50. The Rb atomic beam is then decelerated and longitudinally cooled by a 1m long Zeeman slower.

DOI
10.1063/1.2069651

Related papers

Realization of an intense cold Rb atomic beam based on a two-dimensional magneto-optical trap: Experiments and comparison with simulations

Saptarishi Chaudhuri, Sanjukta Roy, C. S. Unnikrishnan

We discuss the implementation and characterization of the source of a slow, intense, and collimated beam of rubidium atoms. The cold atomic beam is produced by two-dimensional magneto-optical trapping in directions transverse to the atomic beam axis and unbalanced Doppler cooling in the axial direction. The vacuum design allows use of relatively low laser power and a considerably simplified assembly. The atomic beam has a high flux of about $2\ifmmode\times\else\texttimes\fi{}{10}^{10}\phantom{\rule{0.3em}{0ex}}\mathrm{atoms}∕\mathrm{s}$ at a total cooling laser power of $55\phantom{\rule{0.3em}{0ex}}\mathrm{mW}$. It has a narrow longitudinal velocity distribution with mean velocity $15\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}$ with full width at half maximum $3.5\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}$ and has a low divergence of $26\phantom{\rule{0.3em}{0ex}}\mathrm{mrad}$. The high flux enables ultrafast loading of about ${10}^{10}$ atoms into a three-dimensional (3D) magneto-optical trap within 500 ms. The variation of the atomic beam flux was studied as a function of the rubidium vapor pressure, cooling laser power, transverse cooling laser beam length, detuning of the cooling laser, and relative intensities of the cooling beams along the atomic beam axis. We also discuss a detailed comparison of our measurements of the cold atomic beam with a 3D numerical simulation.

Physical Review A•Aug 18, 2006•69 citations

Continuous cold rubidium atomic beam with enhanced flux and tunable velocity

Shengzhe Wang, Zhixin Meng, Peiqiang Yan +2 more

We present a cold atomic beam source based on a two-dimensional (2D)+ magneto-optical trap (MOT), capable of generating a continuous cold beam of 87 Rb atoms with a flux up to 4.3 × 10 9 s -1 , a mean velocity of 10.96(2.20) m/s, and a transverse temperature of 16.90(1.56) µK. Investigating the influence of high cooling laser intensity, we observe a significant population loss of atoms to hyperfine-level dark states. To account for this, we employ a multiple hyperfine level model to calculate the cooling efficiency associated with the population in dark states, subsequently modifying the scattering force. Simulations of beam flux at different cooling and repumping laser intensities using the modified scattering force are in agreement with experimental results. Optimizing repumping and cooling intensities enhances the flux by 50%. The influence of phase modulation on both the pushing and cooling lasers is experimentally studied, revealing that the mean velocity of cold atoms can be tuned from 9.5 m/s to 14.6 m/s with a phase-modulated pushing laser. The versatility of this continuous beam source, featuring high flux, controlled velocity, and narrow transverse temperature, renders it valuable for applications in atom interferometers and clocks, ultimately enhancing bandwidth, sensitivity, and signal contrast in these devices.

arXiv:2312.12027•Optics Express•Jan 31, 2024•5 citations

Low-Velocity Intense Source of Atoms from a Magneto-optical Trap

Zheng‐Tian Lu, Kristan L. Corwin, Michael J. Renn +3 more

We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.

Physical Review Letters•Oct 14, 1996•275 citations

High-brilliance Zeeman-slowed cesium atomic beam

Frank Lison, P. Schuh, D. Haubrich +1 more

We have built a Zeeman-slower apparatus which produces a slow and cold cesium atomic beam. The atomic beam has a mean velocity in the range 35--120 m/s and a high atomic current of more than $2\ifmmode\times\else\texttimes\fi{}{10}^{10}$ cold atoms/s. A small longitudinal velocity spread was achieved by optimizing the termination of the slowing process. The measured value of less than 1 m/s is consistent with a numerical simulation of the slowing process. With a magnetic lens and a tilted two-dimensional optical molasses stage, the slow atomic beam is transversely compressed, collimated, and deflected. We achieve a transverse temperature below the Doppler limit. The brilliance of this beam has been determined to be $7\ifmmode\times\else\texttimes\fi{}{10}^{23}$ atoms ${\mathrm{s}}^{\ensuremath{-}1}{\mathrm{m}}^{\ensuremath{-}2}$ ${\mathrm{sr}}^{\ensuremath{-}1}.$ By optical pumping the slow atomic beam can be polarized in the outermost magnetic substates ${F=4,m}_{F}=\ifmmode\pm\else\textpm\fi{}4,$ of the cesium ground state. This brilliant beam is an ideal source for experiments in atom optics and atom lithography.

Physical Review A•Dec 10, 1999•53 citations

An integrated high-flux cold atomic beam source for strontium

Jie Li, Zhi-Peng Jia, Peng Liu +8 more

We present the design, construction, and characterization of an integrated cold atomic beam source for strontium (Sr), which is based on a compact Zeeman slower for slowing the thermal atomic beam and an atomic deflector for selecting the cold flux. By adopting arrays of permanent magnets to produce the magnetic fields of the slower and the deflector, we effectively reduce the system size and power compared to traditional systems with magnetic coils. After the slower cooling, one can employ additional transverse cooling in the radial direction and improve the atom collimation. The atomic deflectors employ two stages of two-dimensional magnetic-optical trapping (MOT) to deflect the cold flux, whose atomic speed is lower than 50 m/s, by 20° from the thermal atomic beam. We characterize the cold atomic beam flux of the source by measuring the loading rate of a three-dimensional MOT. The loading rates reach up to 109 atoms/s. The setup is compact, highly tunable, lightweight, and requires low electrical power, which addresses the challenge of reducing the complexity of building optical atomic clocks and quantum simulation devices based on Sr.

Review of Scientific Instruments•Sep 1, 2023•9 citations

Continuous, dense, highly collimated sodium beam

W. DeGraffenreid, Jaime Ramirez-Serrano, Y.-M. Liu +1 more

We have developed a slow, highly collimated, and bright sodium atom beam suitable for orientation and alignment studies in cold collisions. A combination of transverse-optical collimation, longitudinal cooling, rapid decoupling from the longitudinal cooling cycle, and a final “optical-force extrusion” stage produces an atom density of 1×1010 cm−3 within a beam-divergence solid angle of 2×10−6 sr. Rapid Zeeman-cooler decoupling results in a narrow laboratory velocity distribution of 5 m/s full width at half maximum and a cold binary intrabeam collision temperature of 4 mK.

Review of Scientific Instruments•Oct 1, 2000•17 citations
We report on the production of a continuous, slow, and cold beam of Rb87 atoms with an extremely high flux of 3.2×1012atoms∕s, a transverse temperature of 3mK, and a longitudinal temperature of 90mK. We describe the apparatus created to generate the atom beam. Hot atoms are emitted from a rubidium candlestick atomic beam source and transversely cooled and collimated by a 20cm long atomic collimator section, boosting overall beam flux by a factor of 50. The Rb atomic beam is then decelerated and longitudinally cooled by a 1m long Zeeman slower.
We discuss the implementation and characterization of the source of a slow, intense, and collimated beam of rubidium atoms. The cold atomic beam is produced by two-dimensional magneto-optical trapping in directions transverse to the atomic beam axis and unbalanced Doppler cooling in the axial direction. The vacuum design allows use of relatively low laser power and a considerably simplified assembly. The atomic beam has a high flux of about $2\ifmmode\times\else\texttimes\fi{}{10}^{10}\phantom{\rule{0.3em}{0ex}}\mathrm{atoms}∕\mathrm{s}$ at a total cooling laser power of 55mW55\phantom{\rule{0.3em}{0ex}}\mathrm{mW}55mW. It has a narrow longitudinal velocity distribution with mean velocity 15m∕s15\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}15m∕s with full width at half maximum 3.5m∕s3.5\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}3.5m∕s and has a low divergence of 26mrad26\phantom{\rule{0.3em}{0ex}}\mathrm{mrad}26mrad. The high flux enables ultrafast loading of about 1010{10}^{10}1010 atoms into a three-dimensional (3D) magneto-optical trap within 500 ms. The variation of the atomic beam flux was studied as a function of the rubidium vapor pressure, cooling laser power, transverse cooling laser beam length, detuning of the cooling laser, and relative intensities of the cooling beams along the atomic beam axis. We also discuss a detailed comparison of our measurements of the cold atomic beam with a 3D numerical simulation.
We present a cold atomic beam source based on a two-dimensional (2D)+ magneto-optical trap (MOT), capable of generating a continuous cold beam of 87 Rb atoms with a flux up to 4.3 × 10 9 s -1 , a mean velocity of 10.96(2.20) m/s, and a transverse temperature of 16.90(1.56) µK. Investigating the influence of high cooling laser intensity, we observe a significant population loss of atoms to hyperfine-level dark states. To account for this, we employ a multiple hyperfine level model to calculate the cooling efficiency associated with the population in dark states, subsequently modifying the scattering force. Simulations of beam flux at different cooling and repumping laser intensities using the modified scattering force are in agreement with experimental results. Optimizing repumping and cooling intensities enhances the flux by 50%. The influence of phase modulation on both the pushing and cooling lasers is experimentally studied, revealing that the mean velocity of cold atoms can be tuned from 9.5 m/s to 14.6 m/s with a phase-modulated pushing laser. The versatility of this continuous beam source, featuring high flux, controlled velocity, and narrow transverse temperature, renders it valuable for applications in atom interferometers and clocks, ultimately enhancing bandwidth, sensitivity, and signal contrast in these devices.
We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.
We have built a Zeeman-slower apparatus which produces a slow and cold cesium atomic beam. The atomic beam has a mean velocity in the range 35--120 m/s and a high atomic current of more than $2\ifmmode\times\else\texttimes\fi{}{10}^{10}$ cold atoms/s. A small longitudinal velocity spread was achieved by optimizing the termination of the slowing process. The measured value of less than 1 m/s is consistent with a numerical simulation of the slowing process. With a magnetic lens and a tilted two-dimensional optical molasses stage, the slow atomic beam is transversely compressed, collimated, and deflected. We achieve a transverse temperature below the Doppler limit. The brilliance of this beam has been determined to be $7\ifmmode\times\else\texttimes\fi{}{10}^{23}$ atoms ${\mathrm{s}}^{\ensuremath{-}1}{\mathrm{m}}^{\ensuremath{-}2}$ ${\mathrm{sr}}^{\ensuremath{-}1}.$ By optical pumping the slow atomic beam can be polarized in the outermost magnetic substates ${F=4,m}_{F}=\ifmmode\pm\else\textpm\fi{}4,$ of the cesium ground state. This brilliant beam is an ideal source for experiments in atom optics and atom lithography.
We present the design, construction, and characterization of an integrated cold atomic beam source for strontium (Sr), which is based on a compact Zeeman slower for slowing the thermal atomic beam and an atomic deflector for selecting the cold flux. By adopting arrays of permanent magnets to produce the magnetic fields of the slower and the deflector, we effectively reduce the system size and power compared to traditional systems with magnetic coils. After the slower cooling, one can employ additional transverse cooling in the radial direction and improve the atom collimation. The atomic deflectors employ two stages of two-dimensional magnetic-optical trapping (MOT) to deflect the cold flux, whose atomic speed is lower than 50 m/s, by 20° from the thermal atomic beam. We characterize the cold atomic beam flux of the source by measuring the loading rate of a three-dimensional MOT. The loading rates reach up to 109 atoms/s. The setup is compact, highly tunable, lightweight, and requires low electrical power, which addresses the challenge of reducing the complexity of building optical atomic clocks and quantum simulation devices based on Sr.
We have developed a slow, highly collimated, and bright sodium atom beam suitable for orientation and alignment studies in cold collisions. A combination of transverse-optical collimation, longitudinal cooling, rapid decoupling from the longitudinal cooling cycle, and a final “optical-force extrusion” stage produces an atom density of 1×1010 cm−3 within a beam-divergence solid angle of 2×10−6 sr. Rapid Zeeman-cooler decoupling results in a narrow laboratory velocity distribution of 5 m/s full width at half maximum and a cold binary intrabeam collision temperature of 4 mK.