Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:physics/0105088 · Physical Review A

Sensitive absolute-gravity gradiometry using atom interferometry

J. M. McGuirk, G. T. Foster, J. B. Fixler, M. J. Snadden, Mark A. Kasevich

Published Feb 8, 2002• 592 citations
arXivHTMLPDF

Abstract

We report the demonstration of a sensitive absolute-gravity gradiometer based on light-pulse atom-interference techniques. The gradiometer consists of two absolute accelerometers operated in a differential mode. We report a differential acceleration sensitivity of $4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}g/{\mathrm{Hz}}^{1/2}$ and an inferred differential acceleration accuracy of less than ${10}^{\ensuremath{-}9}g.$ This corresponds to a gravity-gradient sensitivity of $4E/{\mathrm{Hz}}^{1/2}$ ${(1E=10}^{\ensuremath{-}9}{\mathrm{s}}^{\mathrm{\ensuremath{-}}2})$ and an accuracy of better than $1E$ for a 10-m separation between accelerometers. We demonstrate that the instrument can be used to detect nearby masses in a vibrationally noisy environment and characterize instrument sensitivity to spurious acceleration and rotation noise.

DOI
10.1103/physreva.65.033608

Related papers

Sensitive gravity-gradiometry with atom interferometry: progress towards an improved determination of the gravitational constant

Fiodor Sorrentino, Yu-Hung Lien, G. Rosi +3 more

We here present a high sensitivity gravity-gradiometer based on atom interferometry. In our apparatus, two clouds of laser-cooled rubidium atoms are launched in fountain configuration and interrogated by a Raman interferometry sequence to probe the gradient of gravity field. We recently implemented a high-flux atomic source and a newly designed Raman lasers system in the instrument set-up. We discuss the applications towards a precise determination of the Newtonian gravitational constant G. The long-term stability of the instrument and the signal-to-noise ratio demonstrated here open interesting perspectives for pushing the measurement precision below the 100 ppm level.

arXiv:1002.3549•New Journal of Physics•Sep 24, 2010•55 citations

A Transportable Gravity Gradiometer Based on Atom Interferometry

Nan Yu, Robert J. Thompson, James R. Kellogg +3 more

A transportable atom interferometer-based gravity gradiometer has been developed at JPL to carry out measurements of Earth's gravity field at ever finer spatial resolutions, and to facilitate high-resolution monitoring of temporal variations in the gravity field from ground- and flight-based platforms. Existing satellite-based gravity missions such as CHAMP and GRACE measure the gravity field via precise monitoring of the motion of the satellites; i.e. the satellites themselves function as test masses. JPL's quantum gravity gradiometer employs a quantum phase measurement technique, similar to that employed in atomic clocks, made possible by recent advances in laser cooling and manipulation of atoms. This measurement technique is based on atomwave interferometry, and individual laser-cooled atoms are used as drag-free test masses. The quantum gravity gradiometer employs two identical atom interferometers as precision accelerometers to measure the difference in gravitational acceleration between two points (Figure 1). By using the same lasers for the manipulation of atoms in both interferometers, the accelerometers have a common reference frame and non-inertial accelerations are effectively rejected as common mode noise in the differential measurement of the gravity gradient. As a result, the dual atom interferometer-based gravity gradiometer allows gravity measurements on a moving platform, while achieving the same long-term stability of the best atomic clocks. In the laboratory-based prototype (Figure 2), the cesium atoms used in each atom interferometer are initially collected and cooled in two separate magneto-optic traps (MOTs). Each MOT, consisting of three orthogonal pairs of counter-propagating laser beams centered on a quadrupole magnetic field, collects up to 10(exp 9) atoms. These atoms are then launched vertically as in an atom fountain by switching off the magnetic field and introducing a slight frequency shift between pairs of lasers to create a moving rest frame for the trapped atoms. While still in this moving-frame molasses, the laser frequencies are further detuned from the atomic resonance (while maintaining this relative frequency shift) to cool the atom cloud's temperature to 2 K or below, corresponding to an rms velocity of less than 2 cm/s. After launch, the cold atoms undergo further state and velocity selection to prepare for atom interferometry. The atom interferometers are then realized using laser-induced stimulated Raman transitions to perform the necessary manipulations of each atom, and the resulting interferometer phase is measured using laser-induced fluorescence for state-normalized detection. More than 20 laser beams with independent controls of frequency, phase, and intensity are required for this measurement sequence. This instrument can facilitate the study of Earth's gravitational field from surface and air vehicles, as well as from space by allowing gravity mapping from a low-cost, single spacecraft mission. In addition, the operation of atom interferometer-based instruments in space offers greater sensitivity than is possible in terrestrial instruments due to the much longer interrogation times available in the microgravity environment. A space-based quantum gravity gradiometer has the potential to achieve sensitivities similar to the GRACE mission at long spatial wavelengths, and will also have resolution similar to GOCE for measurement at shorter length scales.

•May 1, 2010•2 citations

A dual-magneto-optical-trap atom gravity gradiometer for determining the Newtonian gravitational constant

Dekai Mao, Xiao-Bing Deng, Hua-Qing Luo +4 more

As part of a program to determine the gravitational constant G using multiple independent methods in the same laboratory, an atom gravity gradiometer is being developed. The gradiometer is designed with two magneto-optical traps to ensure both the fast simultaneous launch of two atomic clouds and an optimized configuration of source masses. Here, the design of the G measurement by atom interferometry is detailed, and the experimental setup of the atom gravity gradiometer is reported. A preliminary sensitivity of 3 × 10−9 g/Hz to differential gravity acceleration is obtained, which corresponds to 99 E/Hz (1 E = 10−9 s−2) for the gradiometer with a baseline of 0.3 m. This provides access to measuring G at the level of less than 200 parts per million in the first experimental stage.

Review of Scientific Instruments•May 1, 2021•29 citations

Sensitivity limits of a Raman atom interferometer as a gravity gradiometer

Fiodor Sorrentino, Quentin Bodart, L. Cacciapuoti +5 more

We evaluate the sensitivity of a dual cloud atom interferometer to the measurement of vertical gravity gradient. We study the influence of most relevant experimental parameters on noise and long term drifts. Results are also applied to the case of doubly differential measurements of the gravitational signal from local source masses. We achieve a short-term sensitivity of $3\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}$ g/$\sqrt{\text{Hz}}$ to differential gravity acceleration, limited by the quantum projection noise of the instrument. Active control of the most critical parameters allows us to reach a resolution of $5\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}11}$ g after 8000 s on the measurement of differential gravity acceleration. The long-term stability is compatible with a measurement of the gravitational constant $G$ at the level of ${10}^{\ensuremath{-}4}$ after an integration time of about 100 h.

arXiv:1312.3741•Physical Review A•Feb 10, 2014•241 citations

Large Area Light-Pulse Atom Interferometry

J. M. McGuirk, M. J. Snadden, Mark A. Kasevich

We report the experimental demonstration of a large area atom interferometer based on extended sequences of light pulses. We characterize the interferometer through measurement of the acceleration due to gravity and demonstrate a threefold enhancement in intrinsic acceleration sensitivity. The technique is applicable to many atom interferometer configurations, including those used for measurement of rotations, gravity gradients, and Planck's over 2pi/m.

Physical Review Letters•Nov 20, 2000•164 citations

Proof-of-principle demonstration of vertical-gravity-gradient measurement using a single-proof-mass double-loop atom interferometer

Isadora Perrin, Yannick Bidel, Nassim Zahzam +3 more

We demonstrate a proof-of-principle of direct Earth gravity-gradient measurement with an atom interferometer-based gravity gradiometer using a single proof mass of cold $^{87}\mathrm{Rb}$ atoms. The atomic gradiometer is implemented in the so-called double-loop configuration, hence providing a direct gravity-gradient dependent phase shift insensitive to dc acceleration and constant rotation rate. The atom interferometer (AI) can be either operated as a gravimeter or a gradiometer by simply adding an extra Raman $\ensuremath{\pi}$ pulse. We demonstrate gravity-gradient measurements first using a vibration isolation platform and second without seismic isolation using the correlation between the AI signal and the vibration signal measured by an auxilliary classical accelerometer allowing one to bypass the absence of common-mode vibration noise rejection in a double-loop geometry. The simplicity of the experimental setup (a single atomic source and unique detection) and the immunity of the AI to rotation-induced contrast loss make it a possible candidate for onboard gravity-gradient measurements.

arXiv:1810.06042•Physical Review A•Jan 2, 2019•27 citations
We report the demonstration of a sensitive absolute-gravity gradiometer based on light-pulse atom-interference techniques. The gradiometer consists of two absolute accelerometers operated in a differential mode. We report a differential acceleration sensitivity of 4\ifmmode×\else\texttimes\fi10\ensuremath−9g/Hz1/24\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}g/{\mathrm{Hz}}^{1/2}4\ifmmode×\else\texttimes\fi10\ensuremath−9g/Hz1/2 and an inferred differential acceleration accuracy of less than 10\ensuremath−9g.{10}^{\ensuremath{-}9}g.10\ensuremath−9g. This corresponds to a gravity-gradient sensitivity of 4E/Hz1/24E/{\mathrm{Hz}}^{1/2}4E/Hz1/2 (1E=10\ensuremath−9s\ensuremath−2){(1E=10}^{\ensuremath{-}9}{\mathrm{s}}^{\mathrm{\ensuremath{-}}2})(1E=10\ensuremath−9s\ensuremath−2) and an accuracy of better than 1E1E1E for a 10-m separation between accelerometers. We demonstrate that the instrument can be used to detect nearby masses in a vibrationally noisy environment and characterize instrument sensitivity to spurious acceleration and rotation noise.
We here present a high sensitivity gravity-gradiometer based on atom interferometry. In our apparatus, two clouds of laser-cooled rubidium atoms are launched in fountain configuration and interrogated by a Raman interferometry sequence to probe the gradient of gravity field. We recently implemented a high-flux atomic source and a newly designed Raman lasers system in the instrument set-up. We discuss the applications towards a precise determination of the Newtonian gravitational constant G. The long-term stability of the instrument and the signal-to-noise ratio demonstrated here open interesting perspectives for pushing the measurement precision below the 100 ppm level.
A transportable atom interferometer-based gravity gradiometer has been developed at JPL to carry out measurements of Earth's gravity field at ever finer spatial resolutions, and to facilitate high-resolution monitoring of temporal variations in the gravity field from ground- and flight-based platforms. Existing satellite-based gravity missions such as CHAMP and GRACE measure the gravity field via precise monitoring of the motion of the satellites; i.e. the satellites themselves function as test masses. JPL's quantum gravity gradiometer employs a quantum phase measurement technique, similar to that employed in atomic clocks, made possible by recent advances in laser cooling and manipulation of atoms. This measurement technique is based on atomwave interferometry, and individual laser-cooled atoms are used as drag-free test masses. The quantum gravity gradiometer employs two identical atom interferometers as precision accelerometers to measure the difference in gravitational acceleration between two points (Figure 1). By using the same lasers for the manipulation of atoms in both interferometers, the accelerometers have a common reference frame and non-inertial accelerations are effectively rejected as common mode noise in the differential measurement of the gravity gradient. As a result, the dual atom interferometer-based gravity gradiometer allows gravity measurements on a moving platform, while achieving the same long-term stability of the best atomic clocks. In the laboratory-based prototype (Figure 2), the cesium atoms used in each atom interferometer are initially collected and cooled in two separate magneto-optic traps (MOTs). Each MOT, consisting of three orthogonal pairs of counter-propagating laser beams centered on a quadrupole magnetic field, collects up to 10(exp 9) atoms. These atoms are then launched vertically as in an atom fountain by switching off the magnetic field and introducing a slight frequency shift between pairs of lasers to create a moving rest frame for the trapped atoms. While still in this moving-frame molasses, the laser frequencies are further detuned from the atomic resonance (while maintaining this relative frequency shift) to cool the atom cloud's temperature to 2 K or below, corresponding to an rms velocity of less than 2 cm/s. After launch, the cold atoms undergo further state and velocity selection to prepare for atom interferometry. The atom interferometers are then realized using laser-induced stimulated Raman transitions to perform the necessary manipulations of each atom, and the resulting interferometer phase is measured using laser-induced fluorescence for state-normalized detection. More than 20 laser beams with independent controls of frequency, phase, and intensity are required for this measurement sequence. This instrument can facilitate the study of Earth's gravitational field from surface and air vehicles, as well as from space by allowing gravity mapping from a low-cost, single spacecraft mission. In addition, the operation of atom interferometer-based instruments in space offers greater sensitivity than is possible in terrestrial instruments due to the much longer interrogation times available in the microgravity environment. A space-based quantum gravity gradiometer has the potential to achieve sensitivities similar to the GRACE mission at long spatial wavelengths, and will also have resolution similar to GOCE for measurement at shorter length scales.
As part of a program to determine the gravitational constant G using multiple independent methods in the same laboratory, an atom gravity gradiometer is being developed. The gradiometer is designed with two magneto-optical traps to ensure both the fast simultaneous launch of two atomic clouds and an optimized configuration of source masses. Here, the design of the G measurement by atom interferometry is detailed, and the experimental setup of the atom gravity gradiometer is reported. A preliminary sensitivity of 3 × 10−9 g/Hz to differential gravity acceleration is obtained, which corresponds to 99 E/Hz (1 E = 10−9 s−2) for the gradiometer with a baseline of 0.3 m. This provides access to measuring G at the level of less than 200 parts per million in the first experimental stage.
We evaluate the sensitivity of a dual cloud atom interferometer to the measurement of vertical gravity gradient. We study the influence of most relevant experimental parameters on noise and long term drifts. Results are also applied to the case of doubly differential measurements of the gravitational signal from local source masses. We achieve a short-term sensitivity of $3\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}$ g/Hz\sqrt{\text{Hz}}Hz​ to differential gravity acceleration, limited by the quantum projection noise of the instrument. Active control of the most critical parameters allows us to reach a resolution of $5\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}11}$ g after 8000 s on the measurement of differential gravity acceleration. The long-term stability is compatible with a measurement of the gravitational constant GGG at the level of ${10}^{\ensuremath{-}4}$ after an integration time of about 100 h.
We demonstrate a proof-of-principle of direct Earth gravity-gradient measurement with an atom interferometer-based gravity gradiometer using a single proof mass of cold 87Rb^{87}\mathrm{Rb}87Rb atoms. The atomic gradiometer is implemented in the so-called double-loop configuration, hence providing a direct gravity-gradient dependent phase shift insensitive to dc acceleration and constant rotation rate. The atom interferometer (AI) can be either operated as a gravimeter or a gradiometer by simply adding an extra Raman $\ensuremath{\pi}$ pulse. We demonstrate gravity-gradient measurements first using a vibration isolation platform and second without seismic isolation using the correlation between the AI signal and the vibration signal measured by an auxilliary classical accelerometer allowing one to bypass the absence of common-mode vibration noise rejection in a double-loop geometry. The simplicity of the experimental setup (a single atomic source and unique detection) and the immunity of the AI to rotation-induced contrast loss make it a possible candidate for onboard gravity-gradient measurements.