Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0703725 · Journal of Statistical Mechanics Theory and Experiment

Different facets of the raise and peel model

Francisco Castilho Alcaraz, V. Rittenberg

Published Jul 6, 2007• 18 citations
arXivHTMLPDF

Abstract

The raise and peel model is a one-dimensional stochastic model of a fluctuating interface with nonlocal interactions. This is an interesting physical model, in this paper we review its properties. Its phase diagram has a massive phase and a gapless phase with varying critical exponents. At the phase transition point, the model exhibits conformal invariance which is a space–time symmetry. Also at this point the model has several other facets which are the connections to associative algebras, two-dimensional fully packed loop models and combinatorics.

DOI
10.1088/1742-5468/2007/07/p07009

Related papers

Nonlocal growth processes and conformal invariance

Francisco Castilho Alcaraz, V. Rittenberg

Up to now the raise and peel model was the single known example of a one-dimensional stochastic process where one can observe conformal invariance. The model has one-parameter. Depending on its value one has a gapped phase, a critical point where one has conformal invariance and a gapless phase with changing values of the dynamical critical exponent $z$. In this model, adsorption is local but desorption is not. The raise and strip model presented here in which desorption is also nonlocal, has the same phase diagram. The critical exponents are different as are some physical properties of the model. Our study suggest the possible existence of a whole class of stochastic models in which one can observe conformal invariance.

arXiv:1204.1001•Journal of Statistical Mechanics Theory and Experiment•May 22, 2012•7 citations

Extensão do modelo Raise and Peel

Julian Andres Jaimes Santamaria

The raise and peel model is a one-dimensional nonlocal stochastic model where adsortion happens locally and desorption is nonlocal.The model depends on the single parameter u that is the ratio among the desorption and adsorption rates.At a special value of this parameter (u = 1) the model has interesting features.The spectrum is described by a conformal field theory (central charge c = 0), and its stationary probability density is related to the equilibrium distribution of a two dimensional system.The phase diagram of the model, as a function of the parameter u, has a massive phase (gapped phase) and a massless (gapless phase) whose critical exponents vary continuously with u.In this monography we study a one-parameter extension of the raise and peel model at u = 1, that depends on the additional parameter p.The new model exhibits conformal invariance for the whole range of values of its parameter p, and it is in the same universality class as the usual raise and peel model.The single difference between the models is the value of the sound velocity v s (p) which is a function of p.The methods used in this monography are the exact diagonalization of the evolution operator of the stochastic model (Hamiltonian), for small lattice sizes and Monte Carlo simulations.

•Oct 5, 2011•0 citations

Pair annihilation reaction D+D→0 in disordered media and conformal invariance

Francisco Castilho Alcaraz, V. Rittenberg

The raise and peel model is a stochastic model of a fluctuating interface separating a substrate covered with clusters of matter of different sizes and a rarefied gas of tiles. The stationary state is obtained when adsorption compensates the desorption of tiles. This model is generalized to an interface with defects (D) . The defects are either adjacent or separated by a cluster. If a tile hits the end of a cluster with a defect nearby, the defect hops at the other end of the cluster, changing its shape. If a tile hits two adjacent defects, the defects annihilate and are replaced by a small cluster. There are no defects in the stationary state. This model can be seen as describing the reaction D+D-->0 , in which the particles (defects) D hop at long distances, changing the medium, and annihilate. Between the hops the medium also changes (tiles hit clusters, changing their shapes). Several properties of this model are presented and some exact results are obtained using the connection of our model with a conformally invariant quantum chain.

arXiv:cond-mat/0612272•Physical Review E•May 14, 2007•7 citations

Stochastic processes and conformal invariance

Jan de Gier, Bernard Nienhuis, Paul A. Pearce +1 more

We discuss a one-dimensional model of a fluctuating interface with a dynamic exponent z=1. The events that occur are adsorption, which is local, and desorption which is nonlocal and may take place over regions of the order of the system size. In the thermodynamic limit, the time dependence of the system is given by characters of the c=0 logarithmic conformal field theory of percolation. This implies in a rigorous way, a connection between logarithmic conformal field theory and stochastic processes. The finite-size scaling behavior of the average height, interface width and other observables are obtained. The avalanches produced during desorption are analyzed and we show that the probability distribution of the avalanche sizes obeys finite-size scaling with new critical exponents.

arXiv:cond-mat/0205467•Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics•Jan 3, 2003•25 citations

Avalanches in the raise and peel model in the presence of a wall

Edwin A. Antillon, Birgit Wehefritz-Kaufmann, Sabre Kais

We investigate a non-equilibrium one-dimensional model known as the raise and peel model describing a growing surface which grows locally and has non-local desorption. For specific values of adsorption ( u a ) and desorption ( u d ) rates, the model shows interesting features. At u a = u d , the model is described by a conformal field theory (with conformal charge c = 0) and its stationary probability can be mapped onto the ground state of the XXZ quantum chain. Moreover, for the regime u a ⩾ u d , the model shows a phase in which the avalanche distribution is scale-invariant. In this work, we study the surface dynamics by looking at avalanche distributions using a finite-sized scaling formalism and explore the effect of adding a wall to the model. The model shows the same universality for the cases with and without a wall for an odd number of tiles removed, but we find a new exponent in the presence of a wall for an even number of tiles released in an avalanche. New insights into the effect of parity on avalanche distributions are discussed and we provide a new conjecture for the probability distribution of avalanches with a wall obtained by using an exact diagonalization of small lattices and Monte Carlo simulations.

arXiv:1301.1634•Journal of Physics A Mathematical and Theoretical•Jun 6, 2013•0 citations

Random and Out-of-Equilibrium Potts models

Christophe Chatelain

A summary of my research activity is presented in this thesis. The first chapter starts with a short presentation of the known critical properties of the pure Potts model, mainly in two dimensions. The influence of disorder coupled to the energy density is then discussed in the general context of temperature-driven phase transitions. A physical explanation for the smoothing of the transition, due to Imry and Wortis, is presented and then applied to explain the phase diagram of the homogeneous random two and three-dimensional Potts models. It is then extended to the Potts model on irregular graphs and with layered randomness. In the third section, the critical properties at the random fixed point are examined in the light of the series expansion obtained by Renormalisation Group. The multifractal spectrum of scaling dimensions is discussed in the two-dimensional case and a new symmetry is proposed. The predictions of conformal invariance for profiles and correlation functions are compared with numerical data for the two-dimensional random Potts model in strip or square geometries. Finally, the geometrical properties of interfaces induced by symmetry-breaking boundary conditions are analysed in the context of the recent Stochastic Schramm-Loewner Evolution theory. The second chapter is devoted to the aging properties of homogeneous or frustrated Potts models submitted to a quench below or at their critical temperature. The scaling theory of two-time functions, as well as the more recent Local Scale Invariance theory , are presented in the first section. The violation of the Fluctuation-Dissipation theorem is described and the interpretation of the so-called Fluctuation-Dissipation Ratio as an out-of-equilibrium effective temperature is discussed. These ideas are applied to different spin models. First, one-dimensional systems with the Ising symmetry are considered. The equivalence of the KDH model with a gas of immobile particles subjected to pair-annihilation is exploited to obtain new analytical results. The question of the universality of dynamical exponents and ratios is then addressed in the two-dimensional case. Several lattices and several models in different universality classes are compared. A new model with the same symmetry as the three-state Potts model but with an irreversible dynamics is introduced. Its phase diagram in the steady state is determined and its aging properties on the critical line are studied. Finally, the aging of the Fully-Frustrated Ising and XY models are examined. Emphasis is put on the presence of logarithmic corrections due to the existence of topological defects. Two applications of the Jarzynski relation to the Potts model are presented at the end of the chapter. A short third chapter introduces the numerical simulations employed to analyse different set of experimental data. Monte Carlo simulations were used to reproduced some magnetic phase transitions in layered nanostructures. Spectroscopic data of surface reconstructions were compared to the electronic band structure obtained by computing the first eigenvectors of the Bloch-Schrödinger equation with a projective technique combined with a multiscale approach.

•Dec 17, 2012•0 citations
The raise and peel model is a one-dimensional stochastic model of a fluctuating interface with nonlocal interactions. This is an interesting physical model, in this paper we review its properties. Its phase diagram has a massive phase and a gapless phase with varying critical exponents. At the phase transition point, the model exhibits conformal invariance which is a space–time symmetry. Also at this point the model has several other facets which are the connections to associative algebras, two-dimensional fully packed loop models and combinatorics.
Up to now the raise and peel model was the single known example of a one-dimensional stochastic process where one can observe conformal invariance. The model has one-parameter. Depending on its value one has a gapped phase, a critical point where one has conformal invariance and a gapless phase with changing values of the dynamical critical exponent zzz. In this model, adsorption is local but desorption is not. The raise and strip model presented here in which desorption is also nonlocal, has the same phase diagram. The critical exponents are different as are some physical properties of the model. Our study suggest the possible existence of a whole class of stochastic models in which one can observe conformal invariance.
The raise and peel model is a one-dimensional nonlocal stochastic model where adsortion happens locally and desorption is nonlocal.The model depends on the single parameter u that is the ratio among the desorption and adsorption rates.At a special value of this parameter (u = 1) the model has interesting features.The spectrum is described by a conformal field theory (central charge c = 0), and its stationary probability density is related to the equilibrium distribution of a two dimensional system.The phase diagram of the model, as a function of the parameter u, has a massive phase (gapped phase) and a massless (gapless phase) whose critical exponents vary continuously with u.In this monography we study a one-parameter extension of the raise and peel model at u = 1, that depends on the additional parameter p.The new model exhibits conformal invariance for the whole range of values of its parameter p, and it is in the same universality class as the usual raise and peel model.The single difference between the models is the value of the sound velocity v s (p) which is a function of p.The methods used in this monography are the exact diagonalization of the evolution operator of the stochastic model (Hamiltonian), for small lattice sizes and Monte Carlo simulations.
The raise and peel model is a stochastic model of a fluctuating interface separating a substrate covered with clusters of matter of different sizes and a rarefied gas of tiles. The stationary state is obtained when adsorption compensates the desorption of tiles. This model is generalized to an interface with defects (D) . The defects are either adjacent or separated by a cluster. If a tile hits the end of a cluster with a defect nearby, the defect hops at the other end of the cluster, changing its shape. If a tile hits two adjacent defects, the defects annihilate and are replaced by a small cluster. There are no defects in the stationary state. This model can be seen as describing the reaction D+D-->0 , in which the particles (defects) D hop at long distances, changing the medium, and annihilate. Between the hops the medium also changes (tiles hit clusters, changing their shapes). Several properties of this model are presented and some exact results are obtained using the connection of our model with a conformally invariant quantum chain.
We discuss a one-dimensional model of a fluctuating interface with a dynamic exponent z=1. The events that occur are adsorption, which is local, and desorption which is nonlocal and may take place over regions of the order of the system size. In the thermodynamic limit, the time dependence of the system is given by characters of the c=0 logarithmic conformal field theory of percolation. This implies in a rigorous way, a connection between logarithmic conformal field theory and stochastic processes. The finite-size scaling behavior of the average height, interface width and other observables are obtained. The avalanches produced during desorption are analyzed and we show that the probability distribution of the avalanche sizes obeys finite-size scaling with new critical exponents.
We investigate a non-equilibrium one-dimensional model known as the raise and peel model describing a growing surface which grows locally and has non-local desorption. For specific values of adsorption ( u a ) and desorption ( u d ) rates, the model shows interesting features. At u a = u d , the model is described by a conformal field theory (with conformal charge c = 0) and its stationary probability can be mapped onto the ground state of the XXZ quantum chain. Moreover, for the regime u a ⩾ u d , the model shows a phase in which the avalanche distribution is scale-invariant. In this work, we study the surface dynamics by looking at avalanche distributions using a finite-sized scaling formalism and explore the effect of adding a wall to the model. The model shows the same universality for the cases with and without a wall for an odd number of tiles removed, but we find a new exponent in the presence of a wall for an even number of tiles released in an avalanche. New insights into the effect of parity on avalanche distributions are discussed and we provide a new conjecture for the probability distribution of avalanches with a wall obtained by using an exact diagonalization of small lattices and Monte Carlo simulations.
A summary of my research activity is presented in this thesis. The first chapter starts with a short presentation of the known critical properties of the pure Potts model, mainly in two dimensions. The influence of disorder coupled to the energy density is then discussed in the general context of temperature-driven phase transitions. A physical explanation for the smoothing of the transition, due to Imry and Wortis, is presented and then applied to explain the phase diagram of the homogeneous random two and three-dimensional Potts models. It is then extended to the Potts model on irregular graphs and with layered randomness. In the third section, the critical properties at the random fixed point are examined in the light of the series expansion obtained by Renormalisation Group. The multifractal spectrum of scaling dimensions is discussed in the two-dimensional case and a new symmetry is proposed. The predictions of conformal invariance for profiles and correlation functions are compared with numerical data for the two-dimensional random Potts model in strip or square geometries. Finally, the geometrical properties of interfaces induced by symmetry-breaking boundary conditions are analysed in the context of the recent Stochastic Schramm-Loewner Evolution theory. The second chapter is devoted to the aging properties of homogeneous or frustrated Potts models submitted to a quench below or at their critical temperature. The scaling theory of two-time functions, as well as the more recent Local Scale Invariance theory , are presented in the first section. The violation of the Fluctuation-Dissipation theorem is described and the interpretation of the so-called Fluctuation-Dissipation Ratio as an out-of-equilibrium effective temperature is discussed. These ideas are applied to different spin models. First, one-dimensional systems with the Ising symmetry are considered. The equivalence of the KDH model with a gas of immobile particles subjected to pair-annihilation is exploited to obtain new analytical results. The question of the universality of dynamical exponents and ratios is then addressed in the two-dimensional case. Several lattices and several models in different universality classes are compared. A new model with the same symmetry as the three-state Potts model but with an irreversible dynamics is introduced. Its phase diagram in the steady state is determined and its aging properties on the critical line are studied. Finally, the aging of the Fully-Frustrated Ising and XY models are examined. Emphasis is put on the presence of logarithmic corrections due to the existence of topological defects. Two applications of the Jarzynski relation to the Potts model are presented at the end of the chapter. A short third chapter introduces the numerical simulations employed to analyse different set of experimental data. Monte Carlo simulations were used to reproduced some magnetic phase transitions in layered nanostructures. Spectroscopic data of surface reconstructions were compared to the electronic band structure obtained by computing the first eigenvectors of the Bloch-Schrödinger equation with a projective technique combined with a multiscale approach.