Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0703586 · Physical Review B

Contractor-renormalization approach to frustrated magnets in a magnetic field

A. Abendschein, Sylvain Capponi

Published Aug 13, 2007• 15 citations
arXivHTMLPDF

Abstract

We propose to use the contractor-renormalization (CORE) technique in order to derive effective models for quantum magnets in a magnetic field. CORE is a powerful nonperturbative technique that can reduce the complexity of a given microscopic model by focusing on the low-energy part. We provide a detailed analysis of frustrated spin ladders, which have been widely studied in the past: in particular, we discuss how to choose the building block and emphasize the use of their reduced density matrix. With a good choice of basis, CORE is able to reproduce the existence or not of magnetization plateaux in the whole phase diagram contrary to a usual perturbation theory. We also address the issue of plateau formation in two-dimensional bilayers and point out the analogy between nonfrustrated strongly anisotropic models and frustrated SU(2) ones.

DOI
10.1103/physrevb.76.064413

Related papers

Numerical contractor renormalization method for quantum spin models

Sylvain Capponi, Andreas Martin Läuchli, Matthieu Mambrini

We demonstrate the utility of the numerical contractor renormalization (CORE) method for quantum spin systems by studying one- and two-dimensional model cases. Our approach consists of two steps: (i) building an effective Hamiltonian with longer ranged interactions up to a certain cutoff using the CORE algorithm and (ii) solving this new model numerically on finite clusters by exact diagonalization and performing finite-size extrapolations to obtain results in the thermodynamic limit. This approach, giving complementary information to analytical treatments of the CORE Hamiltonian, can be used as a semiquantitative numerical method. For ladder-type geometries, we explicitely check the accuracy of the effective models by increasing the range of the effective interactions until reaching convergence. Our results in the perturbative regime and also away from it are in good agreement with previously established results. In two dimensions we consider the plaquette lattice and the kagom\'e lattice as nontrivial test cases for the numerical CORE method. As it becomes more difficult to extend the range of the effective interactions in two dimensions, we propose diagnostic tools (such as the density matrix of the local building block) to ascertain the validity of the basis truncation. On the plaquette lattice we have an excellent description of the system in both the disordered and the ordered phases, thereby showing that the CORE method is able to resolve quantum phase transitions. On the kagom\'e lattice we find that the previously proposed twofold degenerate $S=1∕2$ basis can account for a large number of phenomena of the spin $1∕2$ kagom\'e system. For spin $3∕2$, however, this basis does not seem to be sufficient. In general we are able to simulate system sizes which correspond to an $8\ifmmode\times\else\texttimes\fi{}8$ lattice for the plaquette lattice or a 48-site kagom\'e lattice, which are beyond the possibilities of a standard exact diagonalization approach.

arXiv:cond-mat/0404712•Physical Review B•Sep 29, 2004•59 citations

Computing Effective Hamiltonians of Doped and Frustrated Antiferromagnets By Contractor Renormalization

Assa Auerbach

A review of the Contractor Renormalization (CORE) method, as a systematic derivation of the low energy effective hamiltonian, is given, with emphasis on its differences and advantages over traditional perturbative (weak/strong links) real space RG. For the low energy physics of the 2D Hubbard model, we derive the plaquette bosons (projected SO(5)) model which connects the microscopic model to phases and phenomenology of high‐Tc cuprates. For the S = 1/2 Pyrochlore and Kagomé antiferromagnets, the effective hamiltonians predict spin‐disordered, lattice symmetry breaking, ground states with a large density of low energy singlets as found by exact diagonalization of small clusters.

arXiv:cond-mat/0510738•AIP conference proceedings•Jan 1, 2006•8 citations

Effective Theory of Magnetization Plateaux in the Shastry-Sutherland Lattice

A. Abendschein, Sylvain Capponi

We use the nonperturbative Contractor-Renormalization method (CORE) in order to derive an effective model for triplet excitations on the Shastry-Sutherland lattice. For strong enough magnetic fields, various magnetization plateaux are observed, e.g., at 1/8, 1/4, 1/3 of the saturation, as found experimentally in a related compound. Moreover, other stable plateaux are found at 1/9, 1/6, or 2/9. We give a critical review of previous works and try to resolve some apparent inconsistencies between various theoretical approaches.

arXiv:0807.1071•Physical Review Letters•Nov 26, 2008•72 citations

Magnetization process in a frustrated plaquette dimerized ladder

Federico Elías, Marcelo Arlego, C. A. Lamas

The magnetic phase diagram of a plaquette dimerized and frustrated antiferromagnetic ladder system is studied by using a combination of numerical and analytical techniques. For the strongly frustrated regime, series expansions and bond operator techniques are employed to analyze zero magnetic field, whereas low-energy effective models are used to study the complete magnetization process. The interplay between frustration and dimerization gives rise to a rich plateau structure that is captured by effective models and corroborated by numerical density matrix renormalization group simulations, in particular, the emergence of intermediate plateaus at $M=\frac{1}{4}$ and $\frac{3}{4}$ of saturation in the magnetization curve is clarified.

arXiv:1704.01588•Physical review. B./Physical review. B•Jun 30, 2017•5 citations

ENCORE: An extended contractor renormalization algorithm

A. Fabricio Albuquerque, Helmut G. Katzgraber, Matthias Troyer

Contractor renormalization (CORE) is a real-space renormalization-group method to derive effective Hamiltionians for microscopic models. The original CORE method is based on a real-space decomposition of the lattice into small blocks and the effective degrees of freedom on the lattice are tensor products of those on the small blocks. We present an extension of the CORE method that overcomes this restriction. Our generalization allows the application of CORE to derive arbitrary effective models whose Hilbert space is not just a tensor product of local degrees of freedom. The method is especially well suited to search for microscopic models to emulate low-energy exotic models and can guide the design of quantum devices.

arXiv:0805.2290•Physical Review E•Apr 23, 2009•2 citations

Numerical Contractor Renormalization applied to strongly correlated systems

Sylvain Capponi

We demonstrate the utility of effective Hamilonians for studying strongly correlated systems, such as quantum spin systems. After defining local relevant degrees of freedom, the numerical Contractor Renormalization (CORE) method is applied in two steps: (i) building an effective Hamiltonian with longer ranged interactions up to a certain cut‐off using the CORE algorithm and (ii) solving this new model numerically on finite clusters by exact diagonalization and performing finite‐size extrapolations to obtain results in the thermodynamic limit. This approach, giving complementary information to analytical treatments of the CORE Hamiltonian, can be used as a semi‐quantitative numerical method. For ladder type geometries, we explicitely check the accuracy of the effective models by increasing the range of the effective interactions until reaching convergence. Our results both in the doped and undoped case are in good agreement with previously established results. In two dimensions we consider the plaquette lattice and the kagomé lattice as non‐trivial test cases for the numerical CORE method. As it becomes more difficult to extend the range of the effective interactions in two dimensions, we propose diagnostic tools (such as the density matrix of the local building block) to ascertain the validity of the basis truncation. On the plaquette lattice we have an excellent description of the system in both the disordered and the ordered phases, thereby showing that the CORE method is able to resolve quantum phase transitions. On the kagomé lattice we find that the previously proposed twofold degenerate S = 1/2 basis can account for a large number of phenomena of the spin 1/2 kagomé system and gives a good starting point to study the doped case.

arXiv:cond-mat/0510785•AIP conference proceedings•Jan 1, 2006•2 citations
We propose to use the contractor-renormalization (CORE) technique in order to derive effective models for quantum magnets in a magnetic field. CORE is a powerful nonperturbative technique that can reduce the complexity of a given microscopic model by focusing on the low-energy part. We provide a detailed analysis of frustrated spin ladders, which have been widely studied in the past: in particular, we discuss how to choose the building block and emphasize the use of their reduced density matrix. With a good choice of basis, CORE is able to reproduce the existence or not of magnetization plateaux in the whole phase diagram contrary to a usual perturbation theory. We also address the issue of plateau formation in two-dimensional bilayers and point out the analogy between nonfrustrated strongly anisotropic models and frustrated SU(2) ones.
We demonstrate the utility of the numerical contractor renormalization (CORE) method for quantum spin systems by studying one- and two-dimensional model cases. Our approach consists of two steps: (i) building an effective Hamiltonian with longer ranged interactions up to a certain cutoff using the CORE algorithm and (ii) solving this new model numerically on finite clusters by exact diagonalization and performing finite-size extrapolations to obtain results in the thermodynamic limit. This approach, giving complementary information to analytical treatments of the CORE Hamiltonian, can be used as a semiquantitative numerical method. For ladder-type geometries, we explicitely check the accuracy of the effective models by increasing the range of the effective interactions until reaching convergence. Our results in the perturbative regime and also away from it are in good agreement with previously established results. In two dimensions we consider the plaquette lattice and the kagom\'e lattice as nontrivial test cases for the numerical CORE method. As it becomes more difficult to extend the range of the effective interactions in two dimensions, we propose diagnostic tools (such as the density matrix of the local building block) to ascertain the validity of the basis truncation. On the plaquette lattice we have an excellent description of the system in both the disordered and the ordered phases, thereby showing that the CORE method is able to resolve quantum phase transitions. On the kagom\'e lattice we find that the previously proposed twofold degenerate S=1∕2S=1∕2S=1∕2 basis can account for a large number of phenomena of the spin 1∕21∕21∕2 kagom\'e system. For spin 3∕23∕23∕2, however, this basis does not seem to be sufficient. In general we are able to simulate system sizes which correspond to an $8\ifmmode\times\else\texttimes\fi{}8$ lattice for the plaquette lattice or a 48-site kagom\'e lattice, which are beyond the possibilities of a standard exact diagonalization approach.
A review of the Contractor Renormalization (CORE) method, as a systematic derivation of the low energy effective hamiltonian, is given, with emphasis on its differences and advantages over traditional perturbative (weak/strong links) real space RG. For the low energy physics of the 2D Hubbard model, we derive the plaquette bosons (projected SO(5)) model which connects the microscopic model to phases and phenomenology of high‐Tc cuprates. For the S = 1/2 Pyrochlore and Kagomé antiferromagnets, the effective hamiltonians predict spin‐disordered, lattice symmetry breaking, ground states with a large density of low energy singlets as found by exact diagonalization of small clusters.
We use the nonperturbative Contractor-Renormalization method (CORE) in order to derive an effective model for triplet excitations on the Shastry-Sutherland lattice. For strong enough magnetic fields, various magnetization plateaux are observed, e.g., at 1/8, 1/4, 1/3 of the saturation, as found experimentally in a related compound. Moreover, other stable plateaux are found at 1/9, 1/6, or 2/9. We give a critical review of previous works and try to resolve some apparent inconsistencies between various theoretical approaches.
The magnetic phase diagram of a plaquette dimerized and frustrated antiferromagnetic ladder system is studied by using a combination of numerical and analytical techniques. For the strongly frustrated regime, series expansions and bond operator techniques are employed to analyze zero magnetic field, whereas low-energy effective models are used to study the complete magnetization process. The interplay between frustration and dimerization gives rise to a rich plateau structure that is captured by effective models and corroborated by numerical density matrix renormalization group simulations, in particular, the emergence of intermediate plateaus at M=14M=\frac{1}{4}M=41​ and 34\frac{3}{4}43​ of saturation in the magnetization curve is clarified.
Contractor renormalization (CORE) is a real-space renormalization-group method to derive effective Hamiltionians for microscopic models. The original CORE method is based on a real-space decomposition of the lattice into small blocks and the effective degrees of freedom on the lattice are tensor products of those on the small blocks. We present an extension of the CORE method that overcomes this restriction. Our generalization allows the application of CORE to derive arbitrary effective models whose Hilbert space is not just a tensor product of local degrees of freedom. The method is especially well suited to search for microscopic models to emulate low-energy exotic models and can guide the design of quantum devices.
We demonstrate the utility of effective Hamilonians for studying strongly correlated systems, such as quantum spin systems. After defining local relevant degrees of freedom, the numerical Contractor Renormalization (CORE) method is applied in two steps: (i) building an effective Hamiltonian with longer ranged interactions up to a certain cut‐off using the CORE algorithm and (ii) solving this new model numerically on finite clusters by exact diagonalization and performing finite‐size extrapolations to obtain results in the thermodynamic limit. This approach, giving complementary information to analytical treatments of the CORE Hamiltonian, can be used as a semi‐quantitative numerical method. For ladder type geometries, we explicitely check the accuracy of the effective models by increasing the range of the effective interactions until reaching convergence. Our results both in the doped and undoped case are in good agreement with previously established results. In two dimensions we consider the plaquette lattice and the kagomé lattice as non‐trivial test cases for the numerical CORE method. As it becomes more difficult to extend the range of the effective interactions in two dimensions, we propose diagnostic tools (such as the density matrix of the local building block) to ascertain the validity of the basis truncation. On the plaquette lattice we have an excellent description of the system in both the disordered and the ordered phases, thereby showing that the CORE method is able to resolve quantum phase transitions. On the kagomé lattice we find that the previously proposed twofold degenerate S = 1/2 basis can account for a large number of phenomena of the spin 1/2 kagomé system and gives a good starting point to study the doped case.