We analyze the crosstalk error mechanism in measurement of two capacitively coupled superconducting flux-biased phase qubits. The damped oscillations of the superconducting phase after the measurement of the first qubit may significantly excite the second qubit, leading to its measurement error. The first qubit, which is highly excited after the measurement, is described classically. The second qubit is treated both classically and quantum mechanically. The results of the analysis are used to find the upper limit for the coupling capacitance (thus limiting the frequency of two-qubit operations) for a given tolerable value of the measurement error probability.
We analyze the crosstalk error mechanism in measurement of two capacitively coupled superconducting flux-biased phase qubits. The damped oscillations of the superconducting phase after the measurement of the first qubit may significantly excite the second qubit, leading to its measurement error. The first qubit, which is highly excited after the measurement, is described classically. The second qubit is treated both classically and quantum mechanically. The results of the analysis are used to find the upper limit for the coupling capacitance (thus limiting the frequency of two-qubit operations) for a given tolerable value of the measurement error probability.
We investigate measurement crosstalk in a system with two flux-biased phase qubits coupled by a resonant coplanar waveguide cavity. After qubit measurement, the superconducting phase undergoes damped oscillations in a deep anharmonic potential producing a frequency chirped voltage or crosstalk signal. We show experimentally that a coplanar waveguide cavity acts as a bandpass filter that can significantly reduce the propagation of this crosstalk signal when the qubits are far off resonance from the cavity. The transmission of the crosstalk signal $\ensuremath{\propto}{({\ensuremath{\omega}}_{q}{C}_{x})}^{2}$ can be further minimized by reducing the qubit frequencies and the coupling capacitance to the cavity. We model the large amplitude crosstalk signal and qubit response classically with results that agree well with the experimental data. We find that the maximum energy transferred by the crosstalk generating qubit roughly saturates for long energy relaxation times (T1>100ns) while the delay time necessary for the crosstalk signal to propagate to the cavity scales linearly with T1. Ultimately, the use of resonant cavities as coupling elements and crosstalk filters is extremely beneficial for future architectures incorporating many coupled qubits.
We present a new configuration concept in which two similar Josephson junctions are coupled through a capacitor placed in parallel to a dc-superconducting quantum interference device (SQUID) to improve the characteristics of phase qubits. In real coupled quantum systems, because of mutual effects such as crosstalk, entangled quantum states cannot be independently measured. The proposed two-qubit system is demonstrated to have a negligible crosstalk, obtained from the application of a single measurement pulse and an appropriate external flux to one of the junctions and the dc-SQUID, respectively. Surprisingly, the theoretically predicted fidelity for a single-qubit design increases to 99.99% for typical Josephson junction parameters. The high-fidelity measurement is reached even with pulse times less than 1 ns, while the highest fidelities reported so far are obtained by wide temporal pulses through single-shot current pulse measurements. This is accomplished by proper coupling capacitance, which determines the coupling time, the measurement time, and their proportion. Furthermore, the ratio of decoherence time for this structure with respect to the one belonging to a typical qubit is found to be more than 1.42.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.
Superconducting qubits have achieved exceptional gate fidelities, exceeding the error-correction threshold in recent years. One key ingredient of such improvement is the introduction of tunable couplers to control the qubit-to-qubit coupling through frequency tuning. Moving toward fault-tolerant quantum computation, increasing the number of physical qubits is another step toward effective error correction codes. Under a multiqubit architecture, flux control (Z) lines are crucial in tuning the frequency of the qubits and couplers. However, dense flux lines result in magnetic flux crosstalk, wherein magnetic flux applied to one element inadvertently affects neighboring qubits or couplers. This crosstalk obscures the idle frequency of the qubit when flux bias is applied, which degrades gate performance and calibration accuracy. In this study, we characterize flux crosstalk and suppress it in a multiqubit-coupler chip with multi-Z lines without adding additional readout for couplers. By quantifying the mutual flux-induced frequency shifts of qubits and couplers, we construct a cancellation matrix that enables precise compensation of non-local flux, demonstrating a substantial reduction in Z-line crosstalk from 56.5‰ to 0.13‰, which is close to statistical error. Flux compensation corrects the CZ SWAP measurement, leading to a symmetric map with respect to flux bias. Compared with a crosstalk-free calculated CZ SWAP map, the measured map indicates that our approach provides a near-zero crosstalk for the coupler-transmon system. These results highlight the effectiveness of our approach in enhancing flux crosstalk-free control and supporting its potential for scaling superconducting quantum processors.
We analyze conditions for violation of the Bell inequality in the Clauser-Horne-Shimony-Holt form, focusing on Josephson phase qubits. We start the analysis with maximum violation in the ideal case, and then take into account the effects of local measurement errors and decoherence. Special attention is paid to configurations of the qubit measurement directions in the pseudospin space lying within either horizontal or vertical planes; these configurations are optimal in certain cases. Besides local measurement errors and decoherence, we also discuss the effect of measurement crosstalk, which affects both the classical inequality and the quantum result. In particular, we propose a version of the BI which is insensitive to the crosstalk.
In this work we consider measurements on quantum systems emphasizing\non read-out of superconducting qubits. The qubit is always coupled to an\nenvironment, containing a macroscopic number of degrees of freedom. This\nperturbs the qubit and destroys the phase coherence of the quantum state.\nOne tries to minimize this destructive effect by encoding the quantum information in quantum states which do not couple strongly to the dominant\nnoise sources. It is therefore necessary to design read-out methods that can\ndistinguish these states.\n\nWe focus primarily on the single Cooper-pair box (SCB) charge qubit, whose\nproperties are based on the Josephson effect and Coulumb blockade in superconducting electrical circuits. By encoding the information in the qubit\nenergy eigenstates, it is possible to protect it from the most dangerous decoherence source - charge fluctuations in the environment. We investigate\nthe measurement setup, where the SCB is coupled to a lumped element LCoscillator whose resonance frequency is orders of magnitude smaller than the qubit energy splitting. In this regime the SCB will act as an effective positive or negative capacitance, depending on the quantum state. This quantum capacitance then shifts the oscillator resonance frequency, which can be detected in a homodyne phase measurement.\n\nWe have found that reading out a charge qubit by measuring its quantum\ncapacitance in this manner is quantum limited, independently of the oscillator\nquality factor Q. Moreover, we have found that the low-Q oscillator\nis advantageous for the measurement in two ways: first, such an oscillator\nbetter protects the qubit from thermal dephasing, and, second, it allows to\nincrease the speed of the read-out, making it possible to distinguish the qubit states in a single shot measurement.