Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0605532 · Applied Physics Letters

Low hysteretic behavior of Al∕AlOx∕Al Josephson junctions

S. V. Lotkhov, E. Tolkacheva, D Balashov, M. Khabipov, F.-I. Buchholz, Alexander B Zorin

Published Sep 25, 2006• 22 citations
arXivHTMLPDF

Abstract

All-aluminum Josephson junctions with high-transparency barriers were fabricated using the shadow-evaporation technique and measured at low temperatures, T≈25mK. Due to the high junction transparency, the IV characteristics showed only small hysteresis with a retrapping-to-switching current ratio of up to 80%. The observed critical currents were as large as 80%-100% of the Ambegaokar-Baratoff values. High barrier quality was confirmed by the low subgap leakage currents in the quasiparticle branches, which makes the low hysteretic Al junctions promising for application in integrated rapid single-flux quantum - qubit circuitry.

DOI
10.1063/1.2357915

Related papers

High-Quality Ferromagnetic Josephson Junctions Based on Aluminum Electrodes

Antonio Vettoliere, Roberta Satariano, Raffaella Ferraiuolo +9 more

Aluminum Josephson junctions are the building blocks for the realization of superconducting quantum bits. Attention has been also paid to hybrid ferromagnetic Josephson junctions, which allow switching between different magnetic states, making them interesting for applications such as cryogenic memories, single-photon detectors, and spintronics. In this paper, we report on the fabrication and characterization of high-quality ferromagnetic Josephson junctions based on aluminum technology. We employed an innovative fabrication process inspired by niobium-based technology, allowing us to obtain very high-quality hybrid aluminum Josephson junctions; thus, supporting the use of ferromagnetic Josephson junctions in advanced quantum circuits. The fabrication process is described in detail and the main DC transport properties at low temperatures (current-voltage characteristic, critical current as a function of the temperature, and the external magnetic field) are reported. Here, we illustrate in detail the fabrication process, as well as the main DC transport properties at low temperatures (current-voltage characteristic, critical current as a function of the temperature, and the external magnetic field).

Nanomaterials•Nov 24, 2022•18 citations

Fabrication and I-V Characterization of an Al/AlO x /Al Josephson Junction for Superconducting Qubits

Gustavo Moreto, Diego Molina, Everton Arrighi +1 more

Josephson junctions are key devices in circuit quantum electrodynamics (cQED) and play a central role in quantum technologies. Among the different types, superconductor-insulator-superconductor (S-I-S) junctions based on aluminum/aluminum oxide/aluminum stacks are widely used in superconducting qubits. Despite being a well-established topic, Josephson junctions still present a rich variety of physical regimes and behaviors that require careful experimental investigation. In this work, we present the fabrication of a Dolan-type Josephson junction and its current-voltage (I-V) characterization process. The fabricated devices exhibit good process reproducibility, with approximately 90% yield and a room-temperature resistance variation of about 10% between junctions. The measured I-V curves show nonlinear behavior and hysteresis, consistent with an underdamped regime, while also displaying signatures of phase diffusion. Key parameters such as the normal-state resistance, quasiparticle resistance, critical current, and superconducting gap voltage are extracted and show good agreement with the Ambegaokar-Baratoff relation. The measurement setup and filtering scheme used for the characterization are also described.

Symposium on Microelectronics Technology and Devices•Aug 1, 2026•0 citations

Aluminum-ferromagnetic Josephson tunnel junctions for high quality magnetic switching devices

Antonio Vettoliere, Roberta Satariano, Raffaella Ferraiuolo +9 more

The competition between superconducting and ferromagnetic orderings in Josephson devices has promoted fundamental and applicative studies of high impact for superconducting digital technology, cryogenic memories, and spintronics, where the possibility of switching between different magnetic states is a crucial advantage. Here, we report on fabrication and characterization of very high quality tunnel ferromagnetic Josephson junctions (JJs) with aluminum electrodes, demonstrating hysteretic behavior of the magnetic field pattern preserving typical transport properties of Al junctions, underdamped behavior, and very low quasiparticle dissipation. The proposed technology paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits, toward alternative approaches based on digital control of the Josephson device.

Applied Physics Letters•Jun 27, 2022•15 citations

[INVITED] Overdamped Josephson junctions for digital applications

Pascal Febvre, Romain Collot, Natascia De Leo +4 more

An interesting feature of Superconductor Normal metal Superconductor - Josephson junctions for digital applications is due to their non-hysteretic current-voltage characteristics in a broad temperature range below Tc. This allows to design Single-Flux-Quantum (SFQ) cells without the need of external shunts. Two advantages can be drawn from this property: first the SFQ cells can be more compact which leads to a more integrated solution towards nano-devices and more complex circuits; second the absence of electrical parasitic elements associated with the wiring of resistors external to the Josephson junctions increases the performance of SFQ circuits, in particular regarding the ultimate speed of operation. For this purpose Superconductor Normal metal Insulator-Superconductor Nb/Al-AlOx/Nb Josephson junctions have been recently developed at INRiM with aluminum layer thicknesses between 30 and 100 nm. They exhibit non-hysteretic current-voltage characteristics with RnIc values higher than 0.5 mV in a broad temperature range and optimal Stewart McCumber parameters at 4.2 K for RSFQ applications. The main features of obtained SNIS junctions regarding digital applications are presented.

•Oct 24, 2011•0 citations

Characterization of Superconducting Josephson Junctions on Electro-Optic LiNbO 3 Substrates at mK Temperatures

Saba Kousar, Roberta Satariano, G. Ausanio +5 more

We report on the fabrication and millikelvin char acterization of Nb/Al–AlOx/Nb Josephson junctions directly de posited on X-cut LiNbO3 substrates. Motivated by the strong electro-optic and piezoelectric properties of LiNbO3, such devices are of interest for future hybrid superconducting–electro-optic architectures. The junctions were fabricated using standard processes involving DC magnetron sputtering followed by controlled thermal oxidation of the aluminum layer to form an AlOx tunnel barrier with reproducible junction areas. Insulation of the junctions was achieved by anodization and SiOx deposition. Electrical measurements performed at 30 mK reveal high-quality Josephson tunnel junction behavior with a critical current density ofJc= 70 A/cm2and a characteristic voltage reaching values up toVm= 286 mV. Differential conductance measurements exhibit pronounced quasiparticle peaks corresponding to a sum gap energy of 2Δ = (2.73 ± 0.05) meV, confirming the good quality of the Nb electrodes. Magnetic-field-dependent measure ments yield a Josephson penetration depth of λJ= 45 μm, confirming operation in the small-junction regime, with deviations from the ideal Josephson interference pattern attributed to non-uniform current distribution across the junction area. Compared to our previous characterization at 4.2 K, this work demonstrates reliable Josephson junction operation on LiNbO3 at dilution-refrigerator temperatures relevant for quantum circuits, supporting the suitability of lithium niobate as a promising substrate for future hybrid superconducting–electro-optic device implementations.

IEEE Transactions on Applied Superconductivity•Feb 23, 2026•0 citations

Improved Characteristics of Intrinsically Shunted ${\rm Nb/Al}-{\rm AlO}_{x}-{\rm Nb}$ Josephson Junctions

V. Lacquaniti, Natascia De Leo, Matteo Fretto +3 more

Josephson junctions with non-hysteretic current-voltage characteristics form the basis of most superconducting electronic circuits including RSFQ logic and programmable Josephson voltage standards. In contrast to conventional SIS devices, Nb/Al-AlOx-Nb (SNIS) junctions with an additional comparatively thick Al interlayer and a comparatively thin barrier AlOxare intrinsically shunted at T ≥ 4.2 K . In this contribution, we provide experimental and theoretical arguments proving that this finding is mainly explained by a broad distribution of highly-conductive barrier transparencies with a significant effect from nearly ballistic modes. An additional advantage of the proposed SNIS junctions is possibility to tune the critical voltage value by modifying Nb and/or Al film thicknesses. With observations of wide Shapiro steps up to 1.25 V at 6.3 K we show that this type of Josephson junctions can be successfully used at temperatures above 4.2 K. The presence of well-developed quantized voltage features even at 7.2 K means that Nb/Al-AlOx-Nb devices can successfully operate far above the liquid helium temperature and, in principle, are compatible with two-stage cryocoolers.

IEEE Transactions on Applied Superconductivity•Nov 9, 2010•2 citations
All-aluminum Josephson junctions with high-transparency barriers were fabricated using the shadow-evaporation technique and measured at low temperatures, T≈25mK. Due to the high junction transparency, the IV characteristics showed only small hysteresis with a retrapping-to-switching current ratio of up to 80%. The observed critical currents were as large as 80%-100% of the Ambegaokar-Baratoff values. High barrier quality was confirmed by the low subgap leakage currents in the quasiparticle branches, which makes the low hysteretic Al junctions promising for application in integrated rapid single-flux quantum - qubit circuitry.
Aluminum Josephson junctions are the building blocks for the realization of superconducting quantum bits. Attention has been also paid to hybrid ferromagnetic Josephson junctions, which allow switching between different magnetic states, making them interesting for applications such as cryogenic memories, single-photon detectors, and spintronics. In this paper, we report on the fabrication and characterization of high-quality ferromagnetic Josephson junctions based on aluminum technology. We employed an innovative fabrication process inspired by niobium-based technology, allowing us to obtain very high-quality hybrid aluminum Josephson junctions; thus, supporting the use of ferromagnetic Josephson junctions in advanced quantum circuits. The fabrication process is described in detail and the main DC transport properties at low temperatures (current-voltage characteristic, critical current as a function of the temperature, and the external magnetic field) are reported. Here, we illustrate in detail the fabrication process, as well as the main DC transport properties at low temperatures (current-voltage characteristic, critical current as a function of the temperature, and the external magnetic field).
Josephson junctions are key devices in circuit quantum electrodynamics (cQED) and play a central role in quantum technologies. Among the different types, superconductor-insulator-superconductor (S-I-S) junctions based on aluminum/aluminum oxide/aluminum stacks are widely used in superconducting qubits. Despite being a well-established topic, Josephson junctions still present a rich variety of physical regimes and behaviors that require careful experimental investigation. In this work, we present the fabrication of a Dolan-type Josephson junction and its current-voltage (I-V) characterization process. The fabricated devices exhibit good process reproducibility, with approximately 90% yield and a room-temperature resistance variation of about 10% between junctions. The measured I-V curves show nonlinear behavior and hysteresis, consistent with an underdamped regime, while also displaying signatures of phase diffusion. Key parameters such as the normal-state resistance, quasiparticle resistance, critical current, and superconducting gap voltage are extracted and show good agreement with the Ambegaokar-Baratoff relation. The measurement setup and filtering scheme used for the characterization are also described.
The competition between superconducting and ferromagnetic orderings in Josephson devices has promoted fundamental and applicative studies of high impact for superconducting digital technology, cryogenic memories, and spintronics, where the possibility of switching between different magnetic states is a crucial advantage. Here, we report on fabrication and characterization of very high quality tunnel ferromagnetic Josephson junctions (JJs) with aluminum electrodes, demonstrating hysteretic behavior of the magnetic field pattern preserving typical transport properties of Al junctions, underdamped behavior, and very low quasiparticle dissipation. The proposed technology paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits, toward alternative approaches based on digital control of the Josephson device.
An interesting feature of Superconductor Normal metal Superconductor - Josephson junctions for digital applications is due to their non-hysteretic current-voltage characteristics in a broad temperature range below Tc. This allows to design Single-Flux-Quantum (SFQ) cells without the need of external shunts. Two advantages can be drawn from this property: first the SFQ cells can be more compact which leads to a more integrated solution towards nano-devices and more complex circuits; second the absence of electrical parasitic elements associated with the wiring of resistors external to the Josephson junctions increases the performance of SFQ circuits, in particular regarding the ultimate speed of operation. For this purpose Superconductor Normal metal Insulator-Superconductor Nb/Al-AlOx/Nb Josephson junctions have been recently developed at INRiM with aluminum layer thicknesses between 30 and 100 nm. They exhibit non-hysteretic current-voltage characteristics with RnIc values higher than 0.5 mV in a broad temperature range and optimal Stewart McCumber parameters at 4.2 K for RSFQ applications. The main features of obtained SNIS junctions regarding digital applications are presented.
We report on the fabrication and millikelvin char acterization of Nb/Al–AlOx/Nb Josephson junctions directly de posited on X-cut LiNbO3 substrates. Motivated by the strong electro-optic and piezoelectric properties of LiNbO3, such devices are of interest for future hybrid superconducting–electro-optic architectures. The junctions were fabricated using standard processes involving DC magnetron sputtering followed by controlled thermal oxidation of the aluminum layer to form an AlOx tunnel barrier with reproducible junction areas. Insulation of the junctions was achieved by anodization and SiOx deposition. Electrical measurements performed at 30 mK reveal high-quality Josephson tunnel junction behavior with a critical current density ofJc= 70 A/cm2and a characteristic voltage reaching values up toVm= 286 mV. Differential conductance measurements exhibit pronounced quasiparticle peaks corresponding to a sum gap energy of 2Δ = (2.73 ± 0.05) meV, confirming the good quality of the Nb electrodes. Magnetic-field-dependent measure ments yield a Josephson penetration depth of λJ= 45 μm, confirming operation in the small-junction regime, with deviations from the ideal Josephson interference pattern attributed to non-uniform current distribution across the junction area. Compared to our previous characterization at 4.2 K, this work demonstrates reliable Josephson junction operation on LiNbO3 at dilution-refrigerator temperatures relevant for quantum circuits, supporting the suitability of lithium niobate as a promising substrate for future hybrid superconducting–electro-optic device implementations.
Improved Characteristics of Intrinsically Shunted Nb/Al−AlOx−Nb{\rm Nb/Al}-{\rm AlO}_{x}-{\rm Nb}Nb/Al−AlOx​−Nb Josephson Junctions
Josephson junctions with non-hysteretic current-voltage characteristics form the basis of most superconducting electronic circuits including RSFQ logic and programmable Josephson voltage standards. In contrast to conventional SIS devices, Nb/Al-AlOx-Nb (SNIS) junctions with an additional comparatively thick Al interlayer and a comparatively thin barrier AlOxare intrinsically shunted at T ≥ 4.2 K . In this contribution, we provide experimental and theoretical arguments proving that this finding is mainly explained by a broad distribution of highly-conductive barrier transparencies with a significant effect from nearly ballistic modes. An additional advantage of the proposed SNIS junctions is possibility to tune the critical voltage value by modifying Nb and/or Al film thicknesses. With observations of wide Shapiro steps up to 1.25 V at 6.3 K we show that this type of Josephson junctions can be successfully used at temperatures above 4.2 K. The presence of well-developed quantized voltage features even at 7.2 K means that Nb/Al-AlOx-Nb devices can successfully operate far above the liquid helium temperature and, in principle, are compatible with two-stage cryocoolers.