Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0310460 · Comptes Rendus Physique

Bose–Einstein transition temperature in a dilute repulsive gas

Markus Holzmann, Jean-Noël Fuchs, Gordon Baym, Jean-Paul Blaizot, Franck Laloë

Published Jan 1, 2004• 38 citations
arXivHTMLPDF

Abstract

We discuss certain specific features of the calculation of the critical temperature of a dilute repulsive Bose gas. Interactions modify the critical temperature in two different ways. First, for gases in traps, temperature shifts are introduced by a change of the density profile, arising itself from a modification of the equation of state of the gas (reduced compressibility); these shifts can be calculated simply within mean field theory. Second, even in the absence of a trapping potential (homogeneous gas in a box), temperature shifts are introduced by the interactions; they arise from the correlations introduced in the gas, and thus lie inherently beyond mean field theory – in fact, their evaluation requires more elaborate, non-perturbative, calculations. One illustration of this non-perturbative character is provided by the solution of self-consistent equations, which relate together non-linearly the various energy shifts of the single particle levels k . These equations predict that repulsive interactions shift the critical temperature (at constant density) by an amount which is positive, and simply proportional to the scattering length a ; nevertheless, the numerical coefficient is difficult to compute. Physically, the increase of the temperature can be interpreted in terms of the reduced density fluctuations introduced by the repulsive interactions, which facilitate the propagation of large exchange cycles across the sample.

DOI
10.1016/j.crhy.2004.01.003

Related papers

The Transition Temperature of the Dilute Interacting Bose Gas

Gordon Baym, Jean-Paul Blaizot, Markus Holzmann +2 more

We show that the critical temperature of a uniform dilute Bose gas increases linearly with the $s$-wave scattering length describing the repulsion between the particles. Because of infrared divergences, the magnitude of the shift cannot be obtained from perturbation theory, even in the weak coupling regime; rather, it is proportional to the size of the critical region in momentum space. By means of a self-consistent calculation of the quasiparticle spectrum at low momenta at the transition, we find an estimate of the effect in reasonable agreement with numerical simulations.

arXiv:cond-mat/9905430•Physical Review Letters•Aug 30, 1999•250 citations

BEC Transition Temperature of a Dilute Homogeneous Imperfect Bose Gas

Peter B. Arnold, Guy D. Moore

The leading-order effect of interactions on a homogeneous Bose gas is theoretically predicted to shift the critical temperature by an amount $\ensuremath{\Delta}{T}_{c}\ensuremath{\simeq}{\mathrm{ca}}_{\mathrm{sc}}{n}^{1/3}{T}_{0}$ from the ideal gas result ${T}_{0}$, where ${a}_{\mathrm{sc}}$ is the scattering length, $n$ is the density, and $c$ is a pure number. There have been several different theoretical estimates for $c$. We claim to settle the issue by measuring the numerical coefficient in a lattice simulation of O(2) ${\ensuremath{\varphi}}^{4}$ field theory in three dimensions---an effective theory which, as observed previously in the literature, can be systematically matched to the dilute Bose gas problem to reproduce nonuniversal quantities such as the critical temperature. We find $c\phantom{\rule{0ex}{0ex}}=\phantom{\rule{0ex}{0ex}}1.32\ifmmode\pm\else\textpm\fi{}0.02$.

arXiv:cond-mat/0103228•Physical Review Letters•Aug 28, 2001•203 citations

The non-interacting Bose gas

C. J. Pethick, H. Smith

The topic of Bose–Einstein condensation in a uniform, non-interacting gas of bosons is treated in most textbooks on statistical mechanics. In the present chapter we discuss the properties of a non-interacting Bose gas in a trap. We shall calculate equilibrium properties of systems in a semi-classical approximation, in which the energy spectrum is treated as a continuum. For this approach to be valid the temperature must be large compared with Δ∊/ k , where Δ∊ denotes the separation between neighbouring energy levels. As is well known, at temperatures below the Bose–Einstein condensation temperature, the lowest-energy state is not properly accounted for if one simply replaces sums by integrals, and it must be included explicitly. The statistical distribution function is discussed in Sec. 2.1, as is the single-particle density of states, which is a key ingredient in the calculations of thermodynamic properties. Calculations of the transition temperature and the fraction of particles in the condensate are described in Sec. 2.2. In Sec. 2.3 the semi-classical distribution function is introduced. From this we obtain the density profile and the velocity distribution of particles, and use these to determine the shape of an anisotropic cloud after free expansion. Thermodynamic properties of Bose gases are calculated as functions of the temperature in Sec. 2.4. Finally, Sec. 2.5 treats corrections to the transition temperature due to a finite particle number.

Cambridge University Press eBooks•Sep 11, 2008•1 citation

The non-interacting Bose gas

C. J. Pethick, H. Smith

The topic of Bose–Einstein condensation in a uniform, non-interacting gas of bosons is treated in most textbooks on statistical mechanics. In the present chapter we discuss the properties of a non-interacting Bose gas in a trap. We shall calculate equilibrium properties of systems in a semi-classical approximation, in which the energy spectrum is treated as a continuum. For this approach to be valid the temperature must be large compared with Δ∈/ k , where Δ∈ denotes the separation between neighbouring energy levels. As is well known, at temperatures below the Bose–Einstein condensation temperature, the lowest energy state is not properly accounted for if one simply replaces sums by integrals, and it must be included explicitly. The statistical distribution function is discussed in Sec. 2.1, as is the single-particle density of states, which is a key ingredient in the calculations of thermo dynamic properties. Calculations of the transition temperature and the fraction of particles in the condensate are described in Sec. 2.2. In Sec. 2.3 the semi-classical distribution function is introduced, and from this we determine the density profile and the velocity distribution of particles. Thermodynamic properties of Bose gases are calculated as functions of the temperature in Sec. 2.4. The final two sections are devoted to effects not captured by the simplest version of the semi-classical approximation: corrections to the transition temperature due to a finite particle number (Sec. 2.5), and thermodynamic properties of gases in lower dimensions (Sec. 2.6).

Cambridge University Press eBooks•Nov 29, 2001•0 citations

Transition Temperature of Dilute, Weakly Repulsive Bose Gas

Masudul Haque, Andrei E. Ruckenstein

Within a quasiparticle framework, we reconsider the issue of computing the Bose-Einstein condensation temperature ($T_c$) in a weakly non-ideal Bose gas. The main result of this and previous investigations is that $T_c$ increases with the scattering length $a$, with the leading dependence being either linear or log-linear in $a$. The calculation of $T_c$ reduces to that of computing the excitation spectrum near the transition. We report two approaches to regularizing the infrared divergence at the transition point. One leads to a $a\sqrt{|\ln{a}|}$-like shift in $T_c$, and the other allows numerical calculations for the shift.

arXiv:cond-mat/0212590•Dec 25, 2002•0 citations

Thermodynamics of a dilute Bose gas: A path-integral Monte Carlo study

G. Spada, Sebastiano Pilati, S. Giorgini

We present precise path-integral Monte Carlo results for the thermodynamics of a homogeneous dilute Bose gas. Pressure and energy are calculated as a function of temperature both below and above the Bose-Einstein transition. Specifically, we address interaction effects, focusing on deviations from the ideal-gas law in the thermodynamic limit. We also calculate the isothermal compressibility and the contact parameter, which provide a clear signature of the role played by interactions. In particular, we obtain indications of a discontinuity of the compressibility at the transition point. To gain physical insight, numerical results are systematically compared with the predictions of first-order Hartree-Fock and second-order Popov theories, both giving an approximate description of the gas thermodynamics. The comparison shows the extension of the critical region around the transition point, where the inaccuracies of the perturbative expansions are more pronounced.

arXiv:2110.00283•Physical Review A•Jan 31, 2022•12 citations
We discuss certain specific features of the calculation of the critical temperature of a dilute repulsive Bose gas. Interactions modify the critical temperature in two different ways. First, for gases in traps, temperature shifts are introduced by a change of the density profile, arising itself from a modification of the equation of state of the gas (reduced compressibility); these shifts can be calculated simply within mean field theory. Second, even in the absence of a trapping potential (homogeneous gas in a box), temperature shifts are introduced by the interactions; they arise from the correlations introduced in the gas, and thus lie inherently beyond mean field theory – in fact, their evaluation requires more elaborate, non-perturbative, calculations. One illustration of this non-perturbative character is provided by the solution of self-consistent equations, which relate together non-linearly the various energy shifts of the single particle levels k . These equations predict that repulsive interactions shift the critical temperature (at constant density) by an amount which is positive, and simply proportional to the scattering length a ; nevertheless, the numerical coefficient is difficult to compute. Physically, the increase of the temperature can be interpreted in terms of the reduced density fluctuations introduced by the repulsive interactions, which facilitate the propagation of large exchange cycles across the sample.
We show that the critical temperature of a uniform dilute Bose gas increases linearly with the sss-wave scattering length describing the repulsion between the particles. Because of infrared divergences, the magnitude of the shift cannot be obtained from perturbation theory, even in the weak coupling regime; rather, it is proportional to the size of the critical region in momentum space. By means of a self-consistent calculation of the quasiparticle spectrum at low momenta at the transition, we find an estimate of the effect in reasonable agreement with numerical simulations.
The leading-order effect of interactions on a homogeneous Bose gas is theoretically predicted to shift the critical temperature by an amount $\ensuremath{\Delta}{T}_{c}\ensuremath{\simeq}{\mathrm{ca}}_{\mathrm{sc}}{n}^{1/3}{T}_{0}$ from the ideal gas result T0{T}_{0}T0​, where asc{a}_{\mathrm{sc}}asc​ is the scattering length, nnn is the density, and ccc is a pure number. There have been several different theoretical estimates for ccc. We claim to settle the issue by measuring the numerical coefficient in a lattice simulation of O(2) ${\ensuremath{\varphi}}^{4}$ field theory in three dimensions---an effective theory which, as observed previously in the literature, can be systematically matched to the dilute Bose gas problem to reproduce nonuniversal quantities such as the critical temperature. We find $c\phantom{\rule{0ex}{0ex}}=\phantom{\rule{0ex}{0ex}}1.32\ifmmode\pm\else\textpm\fi{}0.02$.
The topic of Bose–Einstein condensation in a uniform, non-interacting gas of bosons is treated in most textbooks on statistical mechanics. In the present chapter we discuss the properties of a non-interacting Bose gas in a trap. We shall calculate equilibrium properties of systems in a semi-classical approximation, in which the energy spectrum is treated as a continuum. For this approach to be valid the temperature must be large compared with Δ∊/ k , where Δ∊ denotes the separation between neighbouring energy levels. As is well known, at temperatures below the Bose–Einstein condensation temperature, the lowest-energy state is not properly accounted for if one simply replaces sums by integrals, and it must be included explicitly. The statistical distribution function is discussed in Sec. 2.1, as is the single-particle density of states, which is a key ingredient in the calculations of thermodynamic properties. Calculations of the transition temperature and the fraction of particles in the condensate are described in Sec. 2.2. In Sec. 2.3 the semi-classical distribution function is introduced. From this we obtain the density profile and the velocity distribution of particles, and use these to determine the shape of an anisotropic cloud after free expansion. Thermodynamic properties of Bose gases are calculated as functions of the temperature in Sec. 2.4. Finally, Sec. 2.5 treats corrections to the transition temperature due to a finite particle number.
The topic of Bose–Einstein condensation in a uniform, non-interacting gas of bosons is treated in most textbooks on statistical mechanics. In the present chapter we discuss the properties of a non-interacting Bose gas in a trap. We shall calculate equilibrium properties of systems in a semi-classical approximation, in which the energy spectrum is treated as a continuum. For this approach to be valid the temperature must be large compared with Δ∈/ k , where Δ∈ denotes the separation between neighbouring energy levels. As is well known, at temperatures below the Bose–Einstein condensation temperature, the lowest energy state is not properly accounted for if one simply replaces sums by integrals, and it must be included explicitly. The statistical distribution function is discussed in Sec. 2.1, as is the single-particle density of states, which is a key ingredient in the calculations of thermo dynamic properties. Calculations of the transition temperature and the fraction of particles in the condensate are described in Sec. 2.2. In Sec. 2.3 the semi-classical distribution function is introduced, and from this we determine the density profile and the velocity distribution of particles. Thermodynamic properties of Bose gases are calculated as functions of the temperature in Sec. 2.4. The final two sections are devoted to effects not captured by the simplest version of the semi-classical approximation: corrections to the transition temperature due to a finite particle number (Sec. 2.5), and thermodynamic properties of gases in lower dimensions (Sec. 2.6).
Within a quasiparticle framework, we reconsider the issue of computing the Bose-Einstein condensation temperature (TcT_cTc​) in a weakly non-ideal Bose gas. The main result of this and previous investigations is that TcT_cTc​ increases with the scattering length aaa, with the leading dependence being either linear or log-linear in aaa. The calculation of TcT_cTc​ reduces to that of computing the excitation spectrum near the transition. We report two approaches to regularizing the infrared divergence at the transition point. One leads to a a∣ln⁡a∣a\sqrt{|\ln{a}|}a∣lna∣​-like shift in TcT_cTc​, and the other allows numerical calculations for the shift.
We present precise path-integral Monte Carlo results for the thermodynamics of a homogeneous dilute Bose gas. Pressure and energy are calculated as a function of temperature both below and above the Bose-Einstein transition. Specifically, we address interaction effects, focusing on deviations from the ideal-gas law in the thermodynamic limit. We also calculate the isothermal compressibility and the contact parameter, which provide a clear signature of the role played by interactions. In particular, we obtain indications of a discontinuity of the compressibility at the transition point. To gain physical insight, numerical results are systematically compared with the predictions of first-order Hartree-Fock and second-order Popov theories, both giving an approximate description of the gas thermodynamics. The comparison shows the extension of the critical region around the transition point, where the inaccuracies of the perturbative expansions are more pronounced.