We demonstrate theoretically the use of genetic-learning algorithms to coherently control the dynamics of a Bose-Einstein condensate. We consider specifically the situation of a condensate in an optical lattice formed by two counterpropagating laser beams. The frequency detuning between the lasers acts as a control parameter that can be used to precisely manipulate the condensate even in the presence of a significant mean-field energy. We illustrate this procedure in the coherent acceleration of a condensate and in the preparation of a superposition of prescribed relative phase.
We demonstrate theoretically the use of genetic-learning algorithms to coherently control the dynamics of a Bose-Einstein condensate. We consider specifically the situation of a condensate in an optical lattice formed by two counterpropagating laser beams. The frequency detuning between the lasers acts as a control parameter that can be used to precisely manipulate the condensate even in the presence of a significant mean-field energy. We illustrate this procedure in the coherent acceleration of a condensate and in the preparation of a superposition of prescribed relative phase.
This dissertation presents a theoretical analysis of methods to manipulate and control the momentum state of coherent matter waves. Of particular interest is the coherent acceleration of a quantum-degenerate atomic system, which, as a direct consequence of the form of the de Broglie wavelength, results in tunable source of matter waves. Such sources are of considerable importance for a number of potential applications in the field of atom optics, including the development of highly sensitive gyroscopes, accelerometers, gravity gradiometers or atom lithography and holography, as well as for potential uses in integrated atom optics. Our basic setup consists of a Bose-Einstein condensate in a moving optical lattice created by a pair of frequency-chirped counterpropagating laser beams acting as a "conveyor belt'' for ultracold atoms. Whereas the acceleration of ultracold but non-condensed atoms in such a lattice was demonstrated earlier, we extend this scheme to the case of Bose-Einstein condensates. As a first step, we investigate the acceleration efficiency for various acceleration rates and nonlinear interaction strengths. We find parameter regimes where efficient acceleration is possible, i.e. all atoms are accelerated to the same velocity and the initially sharp momentum distribution and thus its monochromaticity is preserved. However, in general we identify switch-on effects of the lattice, dynamical loss and nonlinear effects to be responsible for deterioration of the monochromaticity of the condensate: On the one hand, switch-on effects and dynamical loss induce a coupling of the initially populated momentum mode to other modes, thereby distributing the momentum over several modes. On the other hand, the nonlinear release of mean field energy during the acceleration process causes the mode profile itself to broaden, also leading to a contamination of the initial monochromaticity. As a second step, we discuss ways to improve this scheme by removing the restriction of constant accelerations. We employ genetic algorithms to optimize the time-dependent motion of the lattice. We show that with such flexibility, it is possible to achieve a fast and highly efficient coherent acceleration of condensates, even when mean-field effects cannot be neglected. The same scheme also enables the creation of arbitrary coherent superposition states in momentum space. The technique is thus suitable for building highly efficient momentum state beam splitters. In addition to simply accelerating condensates, it is desirable for many potential applications to transport atomic wave packets without dispersion over large distances. This can be achieved by launching bright atomic solitons, where the effects of the nonlinearity counterbalance the dispersion. Placing a Bose-Einstein condensate with repulsive interactions in a lattice, one can create a negative effective mass. Under these circumstances bright and stable soliton solutions exist, so-called gap solitons. After a careful analysis of the soliton properties, we use the tools we developed for condensate acceleration and demonstrate two feasible schemes to excite the solitons. Experimental data released after publication of our results demonstrating the acceleration of Bose-Einstein condensates in moving lattices and the very recent observation of atomic gap solitons indicates that our theoretical analysis was timely and indeed experimentally feasible. As an outlook, we briefly comment on a new direction in the field of atom optics that holds promise for future applications: the use of quantum degenerate Fermi gases. In atomic as well as in optical physics one often encounters situations where there exists a coupling between several modes of a system. Here, we illustrate the "toy model'' of a fermionic coupler where transitions between two internal states are induced by Raman coupling. Due to Fermi statistics and interatomic interactions, this is a simple example of a nonlinear multimode coupler. Investigation of this system consisting of only a few fermions already clearly illustrates the basic differences between bosonic and fermionic dynamics and sheds light on the role of two-body collisions. Understanding the basic mechanisms of this system is a first step towards more sophisticated coherent control of fermionic systems.
We report on the efficient design of quantum optimal-control protocols to manipulate the motional states of an atomic Bose-Einstein condensate (BEC) in a one-dimensional optical lattice.Our protocols operate on the momentum comb associated with the lattice.In contrast to previous works also dealing with control in discrete and large Hilbert spaces, our control schemes allow us to reach a wide variety of targets by varying a single parameter, the lattice position.With this technique, we experimentally demonstrate a precise, robust, and versatile control: we optimize the transfer of the BEC to a single or multiple quantized momentum states with full control on the relative phase between the different momentum components.This also allows us to prepare the BEC in a given eigenstate of the lattice band structure, or superposition thereof.
The precise and convenient control of quantum states is a major goal in atomic physics and optics, and is expected to lead to new physics and new applications. Several recent methods to manipulate a Bose–Einstein condensate (BEC) are given in this chapter. First, Majorana transition is used to generate a spinor condensate and a multicomponent spinor atom laser. Secondly, a cooperative scattering process as Superradiant Rayleigh scattering, is demonstrated tomanipulate the different momentum state of condensate with some new parameters, such as the variable incident angle, the different frequency components and their initial relative phase, the effective linewidth of laser beams. Thirdly, based on a sequence of standing wave pulses, an efficient coherent control for the specific momentum states and nonadiabatically loading a condensate into the ground state of a one-dimensional optical lattice are demonstrated. Finally, the first-order spatial correlations of a Bose gas released from an optical lattice, and multi-band energy structures of single-particle excitations with zero pseudo-momentum transfer for a wide range of lattice depths are measured.
In 1924/25, Satyendranath Bose and Albert Einstein predicted that particles of integer spin (today called bosons) should undergo a statistical phase transition when cooled to temperatures very close to absolute zero (Bose, 1924; Einstein, 1925). This phenomenon, nowadays called Bose-Einstein condensation, has been experimentally observed seventy years later using (nanokelvin temperatures) of bosonic neutral atoms (Anderson et al., 1995; Bradley et al., 1995; Davis et al., 1995c). This spectacular experimental achievement was awarded the Nobel price in 1995 and has triggered a new research direction ultracold gases with more than 200 groups worldwide today. 1 Bose-Einstein condensates (BEC) of atomic represent a fascinating exotic state of matter with properties entirely determined by the laws of mechanics. Although they consisting of several thousands up to millions of atoms, the state can in most cases be described by a single collective wave function with a common phase. This wave function usually has a spatial extent ranging between 1-100 microns, allowing us to observe mechanics essentially by eye using basic magnification optics. The Bose-Einstein condensate can be described as a coherent matter wave in close analogy to the optical field emitted by (or inside) a laser. This analogy has brought about the field of quantum-atom-optics which aims to implement standard elements and experiments known from laser optics using matter waves. As heavy rest mass particles, such as atoms, are very sensitive to gravity or acceleration/rotations, matter-wave interferometers promise orders of magnitude in sensitivity gain compared to their photonic counterparts (Berman, 1996). Over the last decade, experimental tools for the creation and manipulation of matter have reached an impressive degree of sophistication. This allows the construction of tailored Hamiltonians for the system and the quantum simulation of more general physical situations, not connected to atomic physics alone. Optical lattice potentials allow to mimic solid state physics with a high degree of control over essentially all experimental parameters. Particle interactions can be tuned via Feshbach resonances, allowing the study of superconductivity, superfluidity and the formation of
We have performed a number of experiments with a Bose-Einstein condensate (BEC) in a one-dimensional optical lattice. Making use of the small momentum spread of a BEC and standard atom optics techniques, a high level of coherent control over an artificial solid-state system is demonstrated. We are able to load the BEC into the lattice ground state with a very high efficiency by adiabatically turning on the optical lattice. We coherently transfer population between lattice states and observe their evolution. Methods are developed and used to perform band spectroscopy. We use these techniques to build a BEC accelerator and a novel, coherent, large-momentum-transfer beam-splitter.
Bose-Einstein condensates (BECs), a quantum state of matter formed when bosonic atoms are cooled close to absolute zero, have become the premier platform for investigating fundamental physics with atomic vapours. Experiments on Bose-Einstein condensates now achieve exquisite control over many aspects of the system, including interactions, trapping potential, and dynamics. This has precipitated a new wave of research into many-body quantum phenomena and, in particular, solitons. These structures are fundamental excitations of an interacting non-linear medium, of interest to a multitude of scientific disciplines from non-linear optics to financial markets. The highly controllable environment of BECs form an attractive playground for the study of solitons allowing the non-linearity to be dynamically tuned, facilitating deeper investigations into these structures. Consistently generating and analysing solitons in BEC experiments continues to be problematic. In particular, the non-linear dynamics of BECs, though required for the generation of solitons, produce particularly challenging control and optimization problems. These control problems must be solved before further investigations into the fundamental physics of soliton dynamics can be answered. This thesis makes three important advances in the control and measurement of BECs that will lead to better generation and observation of solitons. (1) a theoretical model for a control scheme capable of highly precise wavefunction engineering, (2) the experimental implementation of a machine learning algorithm for online optimisation, and (3) a continuous non-destructive imaging system capable of directly observing soliton dynamics in real-time. Together, these advances provide a suite of tools for manipulating and exploiting solitons in Bose-Einstein condensates. A novel technique was developed theoretically, offering control of the macroscopic wavefunction of a Bose-Einstein condensate with unprecedented spatial resolution and speed. The ability to control the atomic wavefunction at the fundamental length scale is key to the advancement of many quantum technologies such as quantum simulators. The magnetic resonance control scheme is demonstrated through simulation of a 87Rb condensate with the exemplar model generating a single dark soliton with corresponding π phase kink. The soliton represents a structure at the fundamental length scale of the system, and demonstrates the potential of the scheme for precision state engineering. The scheme is extended to generate higher-order soliton modes which are yet to be experimentally realised. A machine learning algorithm based on Gaussian processes was developed and implemented on the evaporative cooling stage of the production of a 87Rb Bose-Einstein condensate, successfully demonstrating fast optimisation to condensation. The Gaussian process develops a statistical model based on the data that enables the characterisation of the relationship between the experimental controls and resultant quality of the BEC. This relationship is often obfuscated through technical details of the apparatus, frustrating the use of theoretical models to design optimal evaporation ramps. These models often only consider ergodic dynamics with two-body s-wave interactions and no other loss rates with better ramps likely exploiting more complex interactions. The internal model generated from the Gaussian process utilised uncertainty in measured data, making the optimisation more robust to experimental noise than alternate methods. The algorithm is shown to produce high quality Bose-Einstein condensates in 10 times fewer experimental iterations than previously used online optimisation techniques. By exploiting information on the sensitivity of each control, the model can be used to aid experimental design. The convergence of the optimisation is further improved by eliminating a superfluous parameter identified by the model. The general usefulness of machine learning compared with bespoke optimisation algorithms has seen machine learning approach ubiquity. Finally, an experimentally straightforward technique for continuous non-destructive imaging of matter-wave solitons was developed and implemented, facilitating measurements of stochastic phenomena. The technique is readily practicable on any ultracold atom experiment with an existing absorption imaging system, simply requiring the probe laser be far-detuned from resonance. With a signal-to-noise of ∼ 33 at 1.25 GHz detuning, the technique is capable of producing 100 images with no observable heating or atom loss. Coupled with a fast optical phase locked loop, the technique can be used in conjunction with absorption imaging to generate a series of non-destructive images followed by a final high signal-to-noise absorption image solely through moving the laser on resonance for the final image. The high performance and utility of this imaging setup make it a powerful tool for ultra-cold atom experiments.