Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Construction and Performance Evaluation of QC-LDPC Codes over Finite Fields

Sohail Noor, Ihsan Ullah

Published Jan 1, 2010• 1 citation
OpenAlex

Abstract

Low Density Parity Check (LDPC) codes are one of the block coding techniques that can approach the Shannon’s limit within a fraction of a decibel for high block lengths. In many digital communication systems these codes have strong competitors of turbo codes for error control. LDPC codes performance depends on the excellent design of parity check matrix and many diverse research methods have been used by different study groups to evaluate the performance. In this research work finite fields construction method is used and diverse techniques like masking, dispersion and array dispersion for the construction of parity check matrix H. These constructed codes are then simulated to make the performance evaluation. The key interest of this research work was to inspect the performance of LDPC codes based on finite fields. A comprehensive masking technique was also an objective of this research work. Simulation was done for different rates using additive white Gaussian noise (AWGN) channel. In MATLAB a library of different functions was created to perform the task for base matrix construction, dispersion, masking, generator matrix construction etc. Results give an idea that even at BER of 10-6 these short length LDPC codes performed much better and have no error floor. BER curves are also with 2-3dB from Shannon’s limit at BER of 10-6 for different rates.

Related papers

Design and performance evaluation of low complexity encoding methods for LDPC codes

Ambar Bajpai, Lunchakorn Wuttisittikulkij, Piya Kovintavewat

There is an important breakthrough in the field of forward error correction techniques, low-density parity-check (LDPC) codes. These codes have potential to approach the Shannon limit with reliable performance on a given channel, known as the channel capacity. Recently, researchers pay much more attention towards LDPC codes because its performance is better than Turbo codes. However, the LDPC code is the best when it is an irregular code and uses with a very large block-length. Although, the short block-length LDPC codes perform not so well, they are easy to implement in various practical applications. Therefore, there is still a demand of new development on the encoding side of LDPC codes for various ranges of code rate and code length so as to capable of using in many applications.This thesis proposes the development of quasi-cyclic (QC) LDPC codes for column weight 3. In the first part of this thesis, we propose a new construction algorithm of QC-LDPC codes for medium to large block-length by combining QC-LDPC codes of small block-length as their component codes, via Chinese remainder theorem (CRT). Such component codes were constructed by permuting each column block sequentially to attain the desire local girth. After combining all component codes to generate an expanded parity-check matrix, the resulting girth is greater than or at least equal to the maximum girth of the component codes. Simulation results show that our proposed construction method of the parity-check matrix significantly outperforms the other well-known existing methods in terms of low error-floor, simple structure, high performance, and can reduce encoding complexity.In addition, this thesis also proposes two new construction methods for QC-LDPC codes, namely a base matrix method and a subtraction based method. A base matrix based method is a simple, less computational complexity method for constructing the exponent matrix (3, K) of girth 8, 10 and 12 of QC-LDPC codes. Another method is a subtraction method, which has a similar exponent matrix as a base matrix method and has a girth at least 8. Results indicate that the LDPC codes constructed from these two methods have flexibility for arbitrary block-column length K and have a similar BER performance if compared to existing methods.

•Jan 1, 2015•0 citations

Construction of Regular and Irregular QC-LDPC Codes: a Finite Field Approach and Masking

Xiaopeng Chen, Lin Zhou, Rui Zhao +1 more

Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes require less hardware resources due to the quasi-cyclic structure of parity-check matrices.In this paper, two improved methods for constructing QC-LDPC codes are proposed.Firstly, in order to make sure the masked LDPC codes have flexible code rate and code length, an improved construction of masking matrix is presented.The proposed regular masking matrix of QC-LDPC codes have the girth at least 6.Then, the irregular codes are constructed by using improved finite field approach and PEG algorithm, which result in large girth and less short cycles.Simulations demonstrate that the proposed QC-LDPC codes have both lower error floor and good waterfall performance.

International Symposium on Advances in Electrical, Electronics and Computer Engineering (ISAEECE)•Jan 1, 2016•1 citation

Performance evaluation of regular cycle non-binary LDPC codes in AWGN channel

Ameenudeen Pe, Anchare V. Babu

Low Density Parity Check Codes (LDPC) are a group of channel codes which can be decoded using a graph. LDPC codes are known to give near Shannon limit performance in Additive White Gaussian Channel (AWGN), but for large block-lengths and irregular construction. To overcome this limitation, it has been proposed to define codes over a higher order Galois Field. In this paper,we construct a regular cycle non binary LDPC code over GF(q), where q=2p.We use a Fast Fourier Transform (FFT) based low complexity algorithm to decode the LDPC code defined over a large Galois Field. We evaluate the performance of these codes in AWGN channel using computer simulations and show that they are giving excellent BER performance.

International Conference on Advances in Computing, Communications and Informatics (ICACCI)•Aug 3, 2012•0 citations

Error Floor Investigation and Girth Optimization for Certain Types of Low-Density Parity Check Codes

Lingyan Sun, Hongwei Song, B. V. K. Vijaya Kumar

Low-density parity check (LDPC) codes with their near-Shannon capacity limit error correcting performance and iterative decoding algorithm are being evaluated for digital communications applications. For LDPC codes to be used in real systems, their error floors need to be investigated. In this paper, we evaluate the performance of disjoint difference set (DDS)-based LDPC codes (with column weights 3, 4, 5) and array code-based LDPC codes (with column weights 3, 4, 5) in the additive white Gaussian noise (AWGN) channel using a high-speed field programmable gate array (FPGA) simulation platform. The error floor regions (bit error rates down to 10/sup -12/) of those codes are presented. For better performance of array codes, a girth optimization method is proposed and the FPGA evaluation results are presented.

IEEE International Conference on Acoustics Speech and Signal Processing•Oct 11, 2006•6 citations

Performance Evaluation of LDPC decoding Algorithm for GF (2)

D Patel Jigisha, Patel Ruchita Kumari

Low Density Parity Check (LDPC) codes are one of the block coding techniques that can approach the Shannon’s limit within a fraction of a decibel for high block lengths. In many digital communication systems, these codes have strong competitors of turbo codes for error control. LDPC codes performance depends on the excellent design of parity check matrix and many diverse research methods have been used by different study groups to evaluate the performance. Unlike many other classes of codes, LDPC codes are already equipped with a fast, probabilistic decoding algorithm. This makes LDPC codes not only attractive from a theoretical point of view, but also very suitable for practical applications. This paper throws hard decision and soft decision algorithm of LDPC. The hard decision algorithm contains Bit flipping algorithm and Soft decoding algorithm contains Sum product algorithm which is used to correct burst error. Sum Product algorithm is also called as belief propagation. Bit flipping and Sum Product algorithms are explained and can be implemented for the generated parity check matrix of (1016x508) for LDPC code with code rate 1/2.

Journal of Emerging Technologies and Innovative Research•Nov 1, 2014•0 citations

Low density parity check codes: construction based on finite geometries

Y. Kou, Shu Lin, M.P.C. Fossorier

Low density parity check (LDPC) codes with iterative decoding based on belief propagation (IDBP) achieve astonishing error performance close to the Shannon limit. Until now there has been no known method for constructing these Shannon limit approaching codes systematically. Good LDPC codes are largely generated by computer search. As a result, the encoding of long LDPC codes is in general very complex. This paper presents the first algebraic method for constructing LDPC codes systematically based on finite analytic geometries. Four classes of finite geometry LDPC codes with relatively good minimum distances are constructed. These codes are either cyclic or quasi-cyclic and therefore their encoding can be implemented with simple linear feedback shift registers. Long finite geometry LDPC codes have been constructed and they achieve an error performance only a few tenths of a dB away from the Shannon limit. Finite geometry LDPC codes are strong competitors to turbo codes for error control in communication and digital data storage systems.

Globecom•Nov 7, 2002•46 citations
Low Density Parity Check (LDPC) codes are one of the block coding techniques that can approach the Shannon’s limit within a fraction of a decibel for high block lengths. In many digital communication systems these codes have strong competitors of turbo codes for error control. LDPC codes performance depends on the excellent design of parity check matrix and many diverse research methods have been used by different study groups to evaluate the performance. In this research work finite fields construction method is used and diverse techniques like masking, dispersion and array dispersion for the construction of parity check matrix H. These constructed codes are then simulated to make the performance evaluation. The key interest of this research work was to inspect the performance of LDPC codes based on finite fields. A comprehensive masking technique was also an objective of this research work. Simulation was done for different rates using additive white Gaussian noise (AWGN) channel. In MATLAB a library of different functions was created to perform the task for base matrix construction, dispersion, masking, generator matrix construction etc. Results give an idea that even at BER of 10-6 these short length LDPC codes performed much better and have no error floor. BER curves are also with 2-3dB from Shannon’s limit at BER of 10-6 for different rates.
There is an important breakthrough in the field of forward error correction techniques, low-density parity-check (LDPC) codes. These codes have potential to approach the Shannon limit with reliable performance on a given channel, known as the channel capacity. Recently, researchers pay much more attention towards LDPC codes because its performance is better than Turbo codes. However, the LDPC code is the best when it is an irregular code and uses with a very large block-length. Although, the short block-length LDPC codes perform not so well, they are easy to implement in various practical applications. Therefore, there is still a demand of new development on the encoding side of LDPC codes for various ranges of code rate and code length so as to capable of using in many applications.This thesis proposes the development of quasi-cyclic (QC) LDPC codes for column weight 3. In the first part of this thesis, we propose a new construction algorithm of QC-LDPC codes for medium to large block-length by combining QC-LDPC codes of small block-length as their component codes, via Chinese remainder theorem (CRT). Such component codes were constructed by permuting each column block sequentially to attain the desire local girth. After combining all component codes to generate an expanded parity-check matrix, the resulting girth is greater than or at least equal to the maximum girth of the component codes. Simulation results show that our proposed construction method of the parity-check matrix significantly outperforms the other well-known existing methods in terms of low error-floor, simple structure, high performance, and can reduce encoding complexity.In addition, this thesis also proposes two new construction methods for QC-LDPC codes, namely a base matrix method and a subtraction based method. A base matrix based method is a simple, less computational complexity method for constructing the exponent matrix (3, K) of girth 8, 10 and 12 of QC-LDPC codes. Another method is a subtraction method, which has a similar exponent matrix as a base matrix method and has a girth at least 8. Results indicate that the LDPC codes constructed from these two methods have flexibility for arbitrary block-column length K and have a similar BER performance if compared to existing methods.
Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes require less hardware resources due to the quasi-cyclic structure of parity-check matrices.In this paper, two improved methods for constructing QC-LDPC codes are proposed.Firstly, in order to make sure the masked LDPC codes have flexible code rate and code length, an improved construction of masking matrix is presented.The proposed regular masking matrix of QC-LDPC codes have the girth at least 6.Then, the irregular codes are constructed by using improved finite field approach and PEG algorithm, which result in large girth and less short cycles.Simulations demonstrate that the proposed QC-LDPC codes have both lower error floor and good waterfall performance.
Low Density Parity Check Codes (LDPC) are a group of channel codes which can be decoded using a graph. LDPC codes are known to give near Shannon limit performance in Additive White Gaussian Channel (AWGN), but for large block-lengths and irregular construction. To overcome this limitation, it has been proposed to define codes over a higher order Galois Field. In this paper,we construct a regular cycle non binary LDPC code over GF(q), where q=2p.We use a Fast Fourier Transform (FFT) based low complexity algorithm to decode the LDPC code defined over a large Galois Field. We evaluate the performance of these codes in AWGN channel using computer simulations and show that they are giving excellent BER performance.
Low-density parity check (LDPC) codes with their near-Shannon capacity limit error correcting performance and iterative decoding algorithm are being evaluated for digital communications applications. For LDPC codes to be used in real systems, their error floors need to be investigated. In this paper, we evaluate the performance of disjoint difference set (DDS)-based LDPC codes (with column weights 3, 4, 5) and array code-based LDPC codes (with column weights 3, 4, 5) in the additive white Gaussian noise (AWGN) channel using a high-speed field programmable gate array (FPGA) simulation platform. The error floor regions (bit error rates down to 10/sup -12/) of those codes are presented. For better performance of array codes, a girth optimization method is proposed and the FPGA evaluation results are presented.
Low Density Parity Check (LDPC) codes are one of the block coding techniques that can approach the Shannon’s limit within a fraction of a decibel for high block lengths. In many digital communication systems, these codes have strong competitors of turbo codes for error control. LDPC codes performance depends on the excellent design of parity check matrix and many diverse research methods have been used by different study groups to evaluate the performance. Unlike many other classes of codes, LDPC codes are already equipped with a fast, probabilistic decoding algorithm. This makes LDPC codes not only attractive from a theoretical point of view, but also very suitable for practical applications. This paper throws hard decision and soft decision algorithm of LDPC. The hard decision algorithm contains Bit flipping algorithm and Soft decoding algorithm contains Sum product algorithm which is used to correct burst error. Sum Product algorithm is also called as belief propagation. Bit flipping and Sum Product algorithms are explained and can be implemented for the generated parity check matrix of (1016x508) for LDPC code with code rate 1/2.
Low density parity check (LDPC) codes with iterative decoding based on belief propagation (IDBP) achieve astonishing error performance close to the Shannon limit. Until now there has been no known method for constructing these Shannon limit approaching codes systematically. Good LDPC codes are largely generated by computer search. As a result, the encoding of long LDPC codes is in general very complex. This paper presents the first algebraic method for constructing LDPC codes systematically based on finite analytic geometries. Four classes of finite geometry LDPC codes with relatively good minimum distances are constructed. These codes are either cyclic or quasi-cyclic and therefore their encoding can be implemented with simple linear feedback shift registers. Long finite geometry LDPC codes have been constructed and they achieve an error performance only a few tenths of a dB away from the Shannon limit. Finite geometry LDPC codes are strong competitors to turbo codes for error control in communication and digital data storage systems.