Eigenface method used in face recognition is introduced to reduce the pattern of interference fringes appearing in the absorption image of cold rubidium atom cloud trapped by an atom chip. The standard method for processing the absorption image is proposed, and the origin of the interference fringes is analyzed. Compared with the standard processing method which uses only one reference image, we take advantage of fifty reference images and reconstruct a new reference image which is more similar to the absorption image than all of the fifty original reference images. Then obvious reduction of interference fringes can be obtained.
Eigenface method used in face recognition is introduced to reduce the pattern of interference fringes appearing in the absorption image of cold rubidium atom cloud trapped by an atom chip. The standard method for processing the absorption image is proposed, and the origin of the interference fringes is analyzed. Compared with the standard processing method which uses only one reference image, we take advantage of fifty reference images and reconstruct a new reference image which is more similar to the absorption image than all of the fifty original reference images. Then obvious reduction of interference fringes can be obtained.
Absorption imaging is a widely employed technique for detecting cold atom clouds and Bose-Einstein condensates (BECs). There are situations where such images may suffer from unwanted interference fringes, resulting in uncertainties in determining crucial parameters such as the atom number, temperatures, or even dynamics in small timescales. Reducing the acoustic vibrations and recording image frames synchronized with the source of such vibrations can largely reduce these fringes; however, some residual fringes still need to be taken care of for precision measurements. In this study, we propose an efficient image post-processing technique for noise reduction that effectively mitigates such interference patterns. Our approach makes use of the well-known eigenface recognition algorithm, combined with an optimized masking strategy applied to the image of the atomic cloud using a small number of basis sets. The use of a limited basis set ensures minimal computational time, allowing this method to be readily incorporated into every experimental run. Through the application of our technique, we successfully reduce interference fringes and improve the accuracy of parameter estimation by 50% in the absorption imaging of cold atoms. The temperature uncertainties of cold 87 Rb atoms are reduced by more than 50% after the algorithm is applied. This approach holds significant promise for enhancing the reliability and precision of experimental measurements in diverse research fields where absorption imaging is employed.
Many powerful imaging techniques for cold atoms are based on determining the optical density by comparing a beam image having passed through the atom cloud to a reference image taken under similar conditions with no atoms. In practice, the beam profile typically contains interference fringes whose phase is not stable between camera exposures. To reduce the error of these fringes in the computed optical density, an algorithm based on principle component analysis (PCA) is often employed. However, PCA is general purpose and not tailored to the specific case of interference fringes. Here we demonstrate an algorithm that takes advantage of the Fourier space structure of interference fringes to further reduce the residual fringe signatures in the optical density.
The noise in absorption imaging of cold atoms significantly impacts measurement accuracy across a range of applications with ultracold atoms. It is crucial to adopt an approach that offers effective denoising capabilities without compromising the unique structure of atom clouds. Here, we introduce, to our knowledge, a novel image enhancement algorithm for cold atomic absorption imaging. The algorithm successfully suppresses background noise, enhancing image contrast significantly. Experimental results showcase that this approach can improve the image's signal-to-noise ratio by about 10 dB and enhance the uncertainty of cold atom number measurements by approximately tenfold, preserving the spatial distribution of the atom clouds. Moreover, the method exhibits exceptional performance and robustness when confronted with fringe noise and multi-component imaging scenarios, offering high stability. Importantly, this method can perform denoising based on a single image (without the need to establish a reference library), and the optimization process is entirely automated, eliminating the need for manual parameter selection. The method is both compatible and practical, making it applicable to various cold atom absorption imaging fields.
Absorption imaging is the foundation for quantitative measurements in experiments on ultracold atoms. This technique mainly involves capturing images of both the probing light field and the atom absorption light field. In this process, the unavoidable jitter of the probing light introduces imaging noise of fringe patterns into the atomic optical density distribution OD. In conventional fringe removal algorithms, this type of noise can be normalized by constructing an optimal reference image from multiple reference images that have been actually taken, which shares similar fringe patterns to an absorption image (Fig. (a)). Although this method works well in the region without atomic signal, they often overlook the modulation of the noise signal due to atomic absorption effects, leading to persistent residual fringes on the atom clouds. This problem becomes more pronounced with atomic density increasing. Here, we propose an enhanced fringe removal algorithm that takes into account the effects of atomic absorption, and actively modulates the intensity of the noise signal in the reference image constructed by conventional fringe removal algorithms (Fig. (b)), effectively preventing the residual fringes from forming, thus significantly improving the signal-to-noise ratio of the atomic images. When applied to the absorption imaging of homogeneous Fermi gases with high density, as shown in Fig. (d), this new algorithm successfully reduces the relative standard deviation of optical depth characterizing atomic density fluctuations by approximately 37%, which is about 3 times the relative standard deviation by conventional algorithm. Three subgraphs in Fig. (e) show the optical depth distribution at corresponding data points labeled by square boxes in Fig. (d). Furthermore, we also use this technique to quantitatively determine the second sound in the unitary Fermi superfluid of 6Li atoms. Compared with conventional fringe removal methods, our new algorithm increases the correlation function’s contrast of the density wave nearly 4 times, therefore enhancing the intensity of the density response spectrum by approximately 15% with half the measured standard error, paving the way for quantitatively determining the speed and attenuation of the second sound. These results demonstrate that the enhanced fringe removal algorithm not only effectively suppresses fringe noise, but also facilitates the identification and detection of important physical phenomena in high-density atomic systems, such as some collective excitations and new quantum phases.
High-sensitivity imaging of ultracold atoms is often challenging when interference patterns are imprinted on the imaging light. Such image noises result in low signal-to-noise ratio and limit the capability of extracting subtle physical quantities. Here we demonstrate an advanced fringe removal algorithm for absorption imaging of ultracold atoms, which efficiently suppresses unwanted fringe patterns using a small number of sample images without taking additional reference images. The protocol is based on an image decomposition and projection method with an extended image basis. We apply this scheme to raw absorption images of degenerate Fermi gases for the measurement of atomic density fluctuations and temperatures. A quantitative analysis shows that image noises can be efficiently removed with only tens of reference images, which manifests the efficiency of our protocol. Our algorithm would be of particular interest for quantum emulation experiments in which several physical parameters need to be scanned within a limited time duration.
The fringe noises disrupt the precise measurement of the atom distribution in the process of the absorption images. The fringe removal algorithms have been proposed to reconstruct the ideal reference images of the absorption images to remove the fringe noises. However, the focus of these fringe removal algorithms is the association of the fringe removal performance with the physical systems, leaving the gap to analyze the workflows of different fringe removal algorithms. This survey reviews the fringe removal algorithms and classifies them into two categories: the image-decomposition based methods and the deep-learning based methods. Then this survey draws the workflow details of two classical fringe removal algorithms, and conducts experiments on the absDL ultracold image dataset. Experiments show that the singular value decomposition (SVD) method achieves outstanding performance, and the U-net method succeeds in implying the image inpainting idea. The main contribution of this survey is the interpretation of the fringe removal algorithms, which may help readers have a better understanding of the research status. Codes in this survey are available at https://github.com/leigaoyi/Atomic_Fringe_Denoise .