Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Andreev interferometry of flux qubits driven by radio frequency field

Chris Checkley

Published Jan 1, 2009• 0 citations
OpenAlex

Abstract

In this thesis we present the continuing work done examining a system in which an Andreev interferometer is used to probe the state of a flux qubit. In particular, we show that the back action of the interferometer on the qubit is low enough that an energy gap can still be observed in the qubit, and present the first experimental evidence of resonant excitation of a flux qubit detected using an Andreev interferometer. We begin by discussing the theory of flux qubits and Andreev interferometers individually. We then go on to examine what happens when with these two types of structures are combined, with particular attention being paid to the consequences for the coherence time of the qubit. We then discuss the practical elements of the experiment, notably the development of a tri-layer resists system that can be used to create high quality mesoscopic structures. We present the experimental results, which show the evidence for resonant excitation of a qubit detected using an Andreev interferometer. The quality of these resonances suggests that the system has a coherence time of less than 1ns. To conclude we examine some ways in which we believe the system can be improved in order to allow more detailed spectroscopic and time resolved measurements.

Related papers

Circuit Quantum Electrodynamics with Flux Qubits

Jean-Luc Orgiazzi

This thesis presents circuit quantum electrodynamic (cQED) experiments done with artificial atoms coupled to a high quality factor superconducting microwave resonator. This work discusses the theoretical framework, design, fabrication, implementation and characterization of a multi-qubit system using superconducting persistent current qubits, often referred as flux qubits. \n \nWe developed a new type of cryogenic aid for fast turnaround microwave experiments. The minimum turnaround time to perform microwave experiments in dilution refrigerators is typically a few days, as required by cooling down and warming up the entire refrigerator. The cryogenic microwave payload and wiring needed for each qubit and resonator add a significant heat load to \nthe system which typically only has a few µW s of cooling power at millikelvin temperatures. We present a new experimental approach we developed in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is reduced to 8 hours if the target temperature is 80 mK. This new measurement method increased our ability to successfully identify good devices with fast design-characterization iterations, while allowing months-long measurements at 30 mK. \n \nOur device architecture uses several qubits, each of which is controlled via on-chip fast flux bias lines. Readout of the qubit’s quantum state is performed by homodyne detection of the resonator field at large driving power. We observe long coherence times at the optimal bias point of the flux qubits and present decoherence measurements around this optimal point, where the \nflux qubits couple mostly to magnetic flux noise. Dynamical decoupling techniques employing fast microwave pulses are used to protect the qubit’s coherence and allow calculating the magnetic flux noise power spectral density of the qubit’s environment. Photon-mediated interaction between distant qubits in the resonator allows the implementation of a two-qubit controlled-NOT gate \nusing the selective darkening technique. \n \nThis multi-qubit superconducting design is an interesting platform to study the decoherence properties of flux qubits, the properties of strong interaction of electromagnetic radiation with macroscopic quantum systems. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.

•Sep 23, 2019•0 citations

Observation of metastable states in a superconducting Josephson circuit using an Andreev interferometer

Andrea Iagallo

We report on measurements of macroscopic quantum states in superconducting Josephson circuits using a highly sensitive hybrid quantum interferometer as the readout probe. The investigated Josephson circuit is one of the leading candidates as solid-state qubits (persistent current qubit), which are known to exhibit macroscopic quantum states with atomic-like properties. The readout device is a modified Andreev interferometer with semi-metallic normal segment in a “folded" geometry, and is designed to reduce the back action during measurement, as well as minimising the electromagnetic coupling between the circuit and the environment.\n A pulsed lock-in technique has been developed to perform continuous readout of the superconductor phase difference using pulse lengths down to 10 ns. The technique enables to control the energy of the probing quasiparticles in the normal segment of the interferometer, which in turn allows to control of the supercurrent owing in the SNS junction and prevents electron heating of the normal segment.\n An experimental set-up was designed and installed in a dilution fridge consisting of shielded wiring, magnetic screens, RF tight sample holder and printed circuit board to allow the injection of high frequency excitation signals, while minimising the environment effect on the qubit through careful electrical filtering. The effect of strong RF irradiation on Andreev interferometers allowed us to estimate the response time of the readout device to be less than 40 ps.\n The measurements show that two macroscopically distinct metastable states exist when the device is biased at the qubit degeneracy point, between which the system makes transitions that can be continuously monitored. Real time kinetics of the system has been investigated at different magnetic fluxes, pulse parameters, temperature and RF radiation. Based on statistical analysis of the transitions, we argue that the metastability is connected with macroscopic quantum tunnelling effects rather than thermal excitation. The experimental data support the hypothesis of a large low frequency noise causing low transition rates.

•Jan 1, 2011•0 citations

Superconducting flux qubit for quantum thermodynamics experiments

Upadhyay, Rishabh

Advancements in the field of cavity quantum electrodynamics (c-QED) have deepened understanding of quantum phenomena, enabled reliable Josephson junction-based devices, and facilitated their integration with other quantum technologies to explore new physics and applications. Motivated by these developments, this thesis aims to construct a testbed for studying quantum thermodynamics using a superconducting flux qubit. The flux qubit is particularly suited for thermodynamic experiments due to its strong anharmonicity and its galvanic coupling architectures that facilitate efficient energy transport. In this thesis, the on-chip components include harmonic oscillators realized as superconducting resonators, a strongly nonlinear superconducting flux qubit, two copper thermal reservoirs modelled as Johnson–Nyquist noise sources and NIS thermometers, integrated on a highly resistive silicon platform that acts as a phonon bath. These components enable the study and optimization of heat transport between the metallic reservoirs, mediated by the quantum circuit, with the flux qubit as the central, flux-tunable working substance. Heat transport through the qubit occurs via sequential excitation and relaxation cycles between its ground and excited states, where excitation extracts heat equal to the qubit’s energy gap from the hot reservoir, while relaxation releases the same energy into the cold reservoir. Enhancing the thermal device’s performance critically depends on the coupling strength between on-chip components, particularly between the qubit and resonator. This thesis commences with the investigation and demonstration of a robust qubit–resonator coupling design that achieves the ultrastrong regime experimentally. Building on this result, the developed architecture is extended to connect the qubit with two identical resonators, symmetrically positioned on the two sides. These resonators are, in turn, coupled to metallic reservoirs, enabling the first ever demonstration of flux qubit-controlled heat transport between the two reservoirs with excellent device performance. Added geometric asymmetry in the coupler, combined with the flux qubit’s strong anharmonicity, enables the successful demonstration--presented in this thesis--of a non-reciprocal device such as the Microwave Quantum Diode, which, together with the reservoirs, could potentially form an efficient thermal diode. Finally, the thesis concludes with a brief outlook on future directions and ongoing experiments that build on the flux qubit–based testbed developed here for exploring quantum thermodynamic phenomena and device applications.

•Jan 1, 2025•0 citations

Flux-tunable superconducting transmons for quantum information processing

Matthew Ware

In this thesis, I describe a series of experiments using flux-tunable transmon qubits for quantum information processing. These qubits are designed with different levels of Josephson junction asymmetry. The first two chapters of this thesis will introduce the reader to superconducting qubits and circuit quantum electrodynamics. I will present experiments using the cQED architecture to implement fast photon swapping between an asymmetric qubit and a superconducting resonator using flux-driven sidebands. This is the first experimental observation of flux-driven sidebands in a superconducting system. This process also allows photon swaps between qubit and resonator to first order in the qubit-resonator coupling strength. I will detail an experiment to study and optimize an all-microwave two-qubit gate using the cross-resonance effect. This work constitutes the first experimental study of the cross-resonance effect vs. frequency and confirms effects from the higher energy levels of the transmon in the effective coupling during a cross-resonant drive. Lastly, I will outline a theoretical analysis and initial experiments to study the coherence properties of asymmetric transmons.

•Jan 1, 2015•2 citations

Coherent processes in Superconducting quantum interferometers and qubits

J. Lantz

In this thesis we present theoretical investigations of the effects of Andreev bound states on the current transport in superconducting interferometers. We also investigate the slow dynamics of the Andreev states in a superconducting point contact, and the possible application as a quantum bit. We consider superconductor-normal metal-superconductor (SNS) and normal metalsuperconductor (NS) interferometers, where the contact region is a Y-shaped normal metal wave guide, and the two connection points to the same superconducting electrode can have different phases. The electric current in the interferometer is calculated as a function of the applied voltage and the phase difference . Andreev reflection in SNS and NS interferometers incorporates two features: interference in the arms of the Y-shaped normal region, and interplay with Andreev resonances. The latter feature yields rich phase dependent current structures in the subgap voltage region. The interference effect leads to a suppression of the current structures at . We investigate the effects on the Josephson current in NS interferometers due to current injection from the normal electrode. The two main effects of the nonequilibrium situation are: nonequilibrium population of the Andreev levels, which can result in enhancement, suppression, or even sign reversal of the Josephson current, and an anomalous interference Josephson effect, which gives rise to a long range Josephson effect, increasing with the voltage up to the superconducting gap . The two Andreev states in a superconducting quantum point contact can be accessed for manipulation and measurement by embedding the point contact in a superconducting loop. We calculate an effective Hamiltonian for the slow dynamics of the Andreev two-level system in the ring. Furthermore, we discuss methods of manipulation of the Andreev levels, and coupling of qubits. The state of the Andreev two-level system can be read out by monitoring the macroscopic quantum tunneling in a current biased Josephson junction, which is embedded in the superconducting ring of the qubit. We discuss the effects on the qubit, the readout scheme and the signal-to-noise ratio. THESIS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY Coherent processes in Superconducting quantum interferometers and qubits

•Jan 1, 2002•0 citations

Opportunities for the direct manipulation of a phase-driven Andreev spin qubit

Yoan Fauvel

Opportunités de manipulation directe d'un qubit de spin d'Andreev piloté en phase The research presented in this thesis delves into a theoretical exploration of Andreev bound states (ABS) hosted in Josephson junctions with spin-orbit coupling (SOC). ABS are fermionic bound states that appear at the junction between two superconducting electrodes forming a Josephson junction. These bound states are at the core of the microscopic description of the Josephson effect and provide an explanation for the transfer of Cooper pairs from one superconducting electrode to the other. Crucially, when the superconducting phase difference between the two electrodes is non-zero, a supercurrent can flow in the junction, depending on the occupancy of the ABS. The presence of this supercurrent facilitates the coupling between a microwave resonator and a junction due to its sensibility to the electromagnetic field. This coupling then allows for the detection and manipulation of ABS.Furthermore, in the presence of SOC along with a superconducting phase bias, the spin degeneracy of ABS can be lifted. Therefore such a junction provides a unique opportunity to realize a special kind of spin qubit known as Andreev spin qubit (ASQ). The qubit operation can be performed via an AC modulation of an electrostatic gate or magnetic flux, thanks to the sensitivity of the ABS to the electric potential or the phase difference, respectively. So far, the coherent manipulation of such qubits has been realized in gate-driven experiments as well as in flux-driven experiments with the use of additional Andreev levels. However, the direct transition between the two ABS forming the ASQ has remained out of reach in flux-driven experiments. In this thesis, we investigate two distinct types of Josephson junctions with SOC with the aim of estimating the amplitude of the matrix elements of the current operator between two ABS forming an ASQ. These elements characterize the coupling strength between the qubit and an external flux drive, indicating which transitions between ABS are within reach. Our first project focuses on a superconductor-normal-superconductor junction where the normal region consists of a nanowire with Rashba SOC. As a minimal model, we consider a generic scatterer located along the nanowire. Unless this scatterer possesses additional spatial (mirror) symmetries, it is responsible for inducing spin-flip transmission probability. Using the scattering formalism, we derive the energy spectrum of ABS and assess how SOC influences the spin-splitting between opposite spin states. We then obtain analytical expressions for the matrix elements of the current operator. Notably, our study reveals that SOC allows one to have finite elements between opposite spin states. In a second project, the system we study consists of a superconductor-double quantum dots-superconductor junction. A quantum dot consists of a tiny region defined by electrostatic gates or impurities. Due to its small size, Coulomb repulsion can be significant. However, in the simplest case of a quantum dot with a single level, even in the presence of SOC in the coupling between the dot and the leads, spin degeneracy of ABS is still preserved. However, recent experiments showed that additional levels allow to lift the spin degeneracy. Here, we introduce a second quantum dot which provides an additional level and offers more control on each level. By using an effective model, we identify the minimal ingredients that are necessary to lift the spin degeneracy. Our results reveal that this splitting is achievable through spin-dependent couplings with the leads and is reduced by the Coulomb repulsion. Additionally, the presence of a finite coupling between the two dots, combined with SOC in the couplings with the leads, allows one to have finite matrix elements of the current operator between opposite spin states, which we obtain numerically. In short, we present in this thesis two platforms for the realization of phase-driven ASQ.

•Apr 9, 2024•0 citations
In this thesis we present the continuing work done examining a system in which an Andreev interferometer is used to probe the state of a flux qubit. In particular, we show that the back action of the interferometer on the qubit is low enough that an energy gap can still be observed in the qubit, and present the first experimental evidence of resonant excitation of a flux qubit detected using an Andreev interferometer. We begin by discussing the theory of flux qubits and Andreev interferometers individually. We then go on to examine what happens when with these two types of structures are combined, with particular attention being paid to the consequences for the coherence time of the qubit. We then discuss the practical elements of the experiment, notably the development of a tri-layer resists system that can be used to create high quality mesoscopic structures. We present the experimental results, which show the evidence for resonant excitation of a qubit detected using an Andreev interferometer. The quality of these resonances suggests that the system has a coherence time of less than 1ns. To conclude we examine some ways in which we believe the system can be improved in order to allow more detailed spectroscopic and time resolved measurements.
This thesis presents circuit quantum electrodynamic (cQED) experiments done with artificial atoms coupled to a high quality factor superconducting microwave resonator. This work discusses the theoretical framework, design, fabrication, implementation and characterization of a multi-qubit system using superconducting persistent current qubits, often referred as flux qubits. \n \nWe developed a new type of cryogenic aid for fast turnaround microwave experiments. The minimum turnaround time to perform microwave experiments in dilution refrigerators is typically a few days, as required by cooling down and warming up the entire refrigerator. The cryogenic microwave payload and wiring needed for each qubit and resonator add a significant heat load to \nthe system which typically only has a few µW s of cooling power at millikelvin temperatures. We present a new experimental approach we developed in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is reduced to 8 hours if the target temperature is 80 mK. This new measurement method increased our ability to successfully identify good devices with fast design-characterization iterations, while allowing months-long measurements at 30 mK. \n \nOur device architecture uses several qubits, each of which is controlled via on-chip fast flux bias lines. Readout of the qubit’s quantum state is performed by homodyne detection of the resonator field at large driving power. We observe long coherence times at the optimal bias point of the flux qubits and present decoherence measurements around this optimal point, where the \nflux qubits couple mostly to magnetic flux noise. Dynamical decoupling techniques employing fast microwave pulses are used to protect the qubit’s coherence and allow calculating the magnetic flux noise power spectral density of the qubit’s environment. Photon-mediated interaction between distant qubits in the resonator allows the implementation of a two-qubit controlled-NOT gate \nusing the selective darkening technique. \n \nThis multi-qubit superconducting design is an interesting platform to study the decoherence properties of flux qubits, the properties of strong interaction of electromagnetic radiation with macroscopic quantum systems. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.
We report on measurements of macroscopic quantum states in superconducting Josephson circuits using a highly sensitive hybrid quantum interferometer as the readout probe. The investigated Josephson circuit is one of the leading candidates as solid-state qubits (persistent current qubit), which are known to exhibit macroscopic quantum states with atomic-like properties. The readout device is a modified Andreev interferometer with semi-metallic normal segment in a “folded" geometry, and is designed to reduce the back action during measurement, as well as minimising the electromagnetic coupling between the circuit and the environment.\n A pulsed lock-in technique has been developed to perform continuous readout of the superconductor phase difference using pulse lengths down to 10 ns. The technique enables to control the energy of the probing quasiparticles in the normal segment of the interferometer, which in turn allows to control of the supercurrent owing in the SNS junction and prevents electron heating of the normal segment.\n An experimental set-up was designed and installed in a dilution fridge consisting of shielded wiring, magnetic screens, RF tight sample holder and printed circuit board to allow the injection of high frequency excitation signals, while minimising the environment effect on the qubit through careful electrical filtering. The effect of strong RF irradiation on Andreev interferometers allowed us to estimate the response time of the readout device to be less than 40 ps.\n The measurements show that two macroscopically distinct metastable states exist when the device is biased at the qubit degeneracy point, between which the system makes transitions that can be continuously monitored. Real time kinetics of the system has been investigated at different magnetic fluxes, pulse parameters, temperature and RF radiation. Based on statistical analysis of the transitions, we argue that the metastability is connected with macroscopic quantum tunnelling effects rather than thermal excitation. The experimental data support the hypothesis of a large low frequency noise causing low transition rates.
Advancements in the field of cavity quantum electrodynamics (c-QED) have deepened understanding of quantum phenomena, enabled reliable Josephson junction-based devices, and facilitated their integration with other quantum technologies to explore new physics and applications. Motivated by these developments, this thesis aims to construct a testbed for studying quantum thermodynamics using a superconducting flux qubit. The flux qubit is particularly suited for thermodynamic experiments due to its strong anharmonicity and its galvanic coupling architectures that facilitate efficient energy transport. In this thesis, the on-chip components include harmonic oscillators realized as superconducting resonators, a strongly nonlinear superconducting flux qubit, two copper thermal reservoirs modelled as Johnson–Nyquist noise sources and NIS thermometers, integrated on a highly resistive silicon platform that acts as a phonon bath. These components enable the study and optimization of heat transport between the metallic reservoirs, mediated by the quantum circuit, with the flux qubit as the central, flux-tunable working substance. Heat transport through the qubit occurs via sequential excitation and relaxation cycles between its ground and excited states, where excitation extracts heat equal to the qubit’s energy gap from the hot reservoir, while relaxation releases the same energy into the cold reservoir. Enhancing the thermal device’s performance critically depends on the coupling strength between on-chip components, particularly between the qubit and resonator. This thesis commences with the investigation and demonstration of a robust qubit–resonator coupling design that achieves the ultrastrong regime experimentally. Building on this result, the developed architecture is extended to connect the qubit with two identical resonators, symmetrically positioned on the two sides. These resonators are, in turn, coupled to metallic reservoirs, enabling the first ever demonstration of flux qubit-controlled heat transport between the two reservoirs with excellent device performance. Added geometric asymmetry in the coupler, combined with the flux qubit’s strong anharmonicity, enables the successful demonstration--presented in this thesis--of a non-reciprocal device such as the Microwave Quantum Diode, which, together with the reservoirs, could potentially form an efficient thermal diode. Finally, the thesis concludes with a brief outlook on future directions and ongoing experiments that build on the flux qubit–based testbed developed here for exploring quantum thermodynamic phenomena and device applications.
In this thesis, I describe a series of experiments using flux-tunable transmon qubits for quantum information processing. These qubits are designed with different levels of Josephson junction asymmetry. The first two chapters of this thesis will introduce the reader to superconducting qubits and circuit quantum electrodynamics. I will present experiments using the cQED architecture to implement fast photon swapping between an asymmetric qubit and a superconducting resonator using flux-driven sidebands. This is the first experimental observation of flux-driven sidebands in a superconducting system. This process also allows photon swaps between qubit and resonator to first order in the qubit-resonator coupling strength. I will detail an experiment to study and optimize an all-microwave two-qubit gate using the cross-resonance effect. This work constitutes the first experimental study of the cross-resonance effect vs. frequency and confirms effects from the higher energy levels of the transmon in the effective coupling during a cross-resonant drive. Lastly, I will outline a theoretical analysis and initial experiments to study the coherence properties of asymmetric transmons.
In this thesis we present theoretical investigations of the effects of Andreev bound states on the current transport in superconducting interferometers. We also investigate the slow dynamics of the Andreev states in a superconducting point contact, and the possible application as a quantum bit. We consider superconductor-normal metal-superconductor (SNS) and normal metalsuperconductor (NS) interferometers, where the contact region is a Y-shaped normal metal wave guide, and the two connection points to the same superconducting electrode can have different phases. The electric current in the interferometer is calculated as a function of the applied voltage and the phase difference . Andreev reflection in SNS and NS interferometers incorporates two features: interference in the arms of the Y-shaped normal region, and interplay with Andreev resonances. The latter feature yields rich phase dependent current structures in the subgap voltage region. The interference effect leads to a suppression of the current structures at . We investigate the effects on the Josephson current in NS interferometers due to current injection from the normal electrode. The two main effects of the nonequilibrium situation are: nonequilibrium population of the Andreev levels, which can result in enhancement, suppression, or even sign reversal of the Josephson current, and an anomalous interference Josephson effect, which gives rise to a long range Josephson effect, increasing with the voltage up to the superconducting gap . The two Andreev states in a superconducting quantum point contact can be accessed for manipulation and measurement by embedding the point contact in a superconducting loop. We calculate an effective Hamiltonian for the slow dynamics of the Andreev two-level system in the ring. Furthermore, we discuss methods of manipulation of the Andreev levels, and coupling of qubits. The state of the Andreev two-level system can be read out by monitoring the macroscopic quantum tunneling in a current biased Josephson junction, which is embedded in the superconducting ring of the qubit. We discuss the effects on the qubit, the readout scheme and the signal-to-noise ratio. THESIS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY Coherent processes in Superconducting quantum interferometers and qubits
Opportunités de manipulation directe d'un qubit de spin d'Andreev piloté en phase The research presented in this thesis delves into a theoretical exploration of Andreev bound states (ABS) hosted in Josephson junctions with spin-orbit coupling (SOC). ABS are fermionic bound states that appear at the junction between two superconducting electrodes forming a Josephson junction. These bound states are at the core of the microscopic description of the Josephson effect and provide an explanation for the transfer of Cooper pairs from one superconducting electrode to the other. Crucially, when the superconducting phase difference between the two electrodes is non-zero, a supercurrent can flow in the junction, depending on the occupancy of the ABS. The presence of this supercurrent facilitates the coupling between a microwave resonator and a junction due to its sensibility to the electromagnetic field. This coupling then allows for the detection and manipulation of ABS.Furthermore, in the presence of SOC along with a superconducting phase bias, the spin degeneracy of ABS can be lifted. Therefore such a junction provides a unique opportunity to realize a special kind of spin qubit known as Andreev spin qubit (ASQ). The qubit operation can be performed via an AC modulation of an electrostatic gate or magnetic flux, thanks to the sensitivity of the ABS to the electric potential or the phase difference, respectively. So far, the coherent manipulation of such qubits has been realized in gate-driven experiments as well as in flux-driven experiments with the use of additional Andreev levels. However, the direct transition between the two ABS forming the ASQ has remained out of reach in flux-driven experiments. In this thesis, we investigate two distinct types of Josephson junctions with SOC with the aim of estimating the amplitude of the matrix elements of the current operator between two ABS forming an ASQ. These elements characterize the coupling strength between the qubit and an external flux drive, indicating which transitions between ABS are within reach. Our first project focuses on a superconductor-normal-superconductor junction where the normal region consists of a nanowire with Rashba SOC. As a minimal model, we consider a generic scatterer located along the nanowire. Unless this scatterer possesses additional spatial (mirror) symmetries, it is responsible for inducing spin-flip transmission probability. Using the scattering formalism, we derive the energy spectrum of ABS and assess how SOC influences the spin-splitting between opposite spin states. We then obtain analytical expressions for the matrix elements of the current operator. Notably, our study reveals that SOC allows one to have finite elements between opposite spin states. In a second project, the system we study consists of a superconductor-double quantum dots-superconductor junction. A quantum dot consists of a tiny region defined by electrostatic gates or impurities. Due to its small size, Coulomb repulsion can be significant. However, in the simplest case of a quantum dot with a single level, even in the presence of SOC in the coupling between the dot and the leads, spin degeneracy of ABS is still preserved. However, recent experiments showed that additional levels allow to lift the spin degeneracy. Here, we introduce a second quantum dot which provides an additional level and offers more control on each level. By using an effective model, we identify the minimal ingredients that are necessary to lift the spin degeneracy. Our results reveal that this splitting is achievable through spin-dependent couplings with the leads and is reduced by the Coulomb repulsion. Additionally, the presence of a finite coupling between the two dots, combined with SOC in the couplings with the leads, allows one to have finite matrix elements of the current operator between opposite spin states, which we obtain numerically. In short, we present in this thesis two platforms for the realization of phase-driven ASQ.