Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Phase-Conjugate Receiver for Gaussian-State Quantum Illumination

Baris I. Erkmen, Saikat Guha

Published Aug 1, 2010• 0 citations
OpenAlex

Abstract

An active optical sensor probes a region of free space that is engulfed in bright thermal noise to determine the presence (or absence) of a weakly reflecting target. The returned light (which is just thermal noise if no target is present, and thermal noise plus a weak reflection of the probe beam if a target is present) is measured and processed by a receiver and a decision is made on whether a target is present. It has been shown that generating an entangled pair of photons (which is a highly nonclassical state of light), using one photon as the probe beam and storing the other photon for comparison to the returned light, has superior performance to the traditional classical-light (coherent-state) target detection sensors. An entangled-photon transmitter and optimal receiver combination can yield up to a factor of 4 (i.e., 6 dB) gain in the error-probability exponent over a coherent state transmitter and optimal receiver combination, in a highly lossy and noisy scenario (when both sensors have the same number of transmitted photons). However, the receiver that achieves this advantage is not known. One structured receiver can close half of the 6-dB gap (i.e., a 3-dB improvement). It is based on phase-conjugating the returned light, then performing dual-balanced difference detection with the stored half of the entangled-photon pair. Active optical sensors are of tremendous value to NASA s missions. Although this work focuses on target detection, it can be extended to imaging (2D, 3D, hyperspectral, etc.) scenarios as well, where the image quality can be better than that offered by traditional active sensors. Although the current work is theoretical, NASA s future missions could benefit significantly from developing and demonstrating this capability. This is an optical receiver design whose components are, in principle, all implementable. However, the work is currently entirely theoretical. It is necessary to: 1. Demonstrate a bench-top proof of the theoretical principle, 2. Create an operational prototype off-the-bench, and 3. Build a practical sensor that can fly in a mission.

Related papers

Gaussian-state quantum-illumination receivers for target detection

Saikat Guha, Baris I. Erkmen

The signal half of an entangled twin beam, generated using spontaneous parametric downconversion, interrogates a region of space that is suspected of containing a target and has high loss and high (entanglement-breaking) background noise. A joint measurement is performed on the returned light and the idler beam that was retained at the transmitter. An optimal quantum receiver, whose implementation is not yet known, was shown to achieve 6 dB gain in the error-probability exponent relative to that achieved with a single coherent-state (classical) laser transmitter and the optimum receiver. We present two structured optical receivers that achieve up to 3 dB gain in the error exponent over that attained with the classical sensor. These are designs of quantum-optical sensors for target detection, which can be readily implemented in a proof-of-concept experiment, that appreciably outperform the best classical sensor in the low-signal-brightness, high-loss, and high-noise operating regime.

arXiv:0911.0950•Physical Review A•Nov 10, 2009•271 citations

Receiver design to harness quantum illumination advantage

Saikat Guha

An optical transmitter that uses entangled light generated by spontaneous parametric downconversion (SPDC), in conjunction with an optimal quantum-optical receiver (whose implementation is not yet known) is in principle capable of obtaining up to a 6 dB gain in the error-probability exponent over the optimum-reception un-entangled coherent-state lidar to detect the presence of a far-away target subject to entanglement-breaking loss and noise in the free-space link . We present an explicit design of a structured quantum-illumination receiver, which in conjunction with the SPDC transmitter is shown to achieve up to a 3 dB error-exponent advantage over the classical sensor. Apart from being fairly feasible for a proof-of-principle demonstration, this is to our knowledge the first structured design of a quantum-optical sensor for target detection that outperforms the comparable best classical lidar sensor appreciably in a low-brightness, lossy and noisy operating regime.

arXiv:0902.2932•IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2009•25 citations

Quantum Illumination with Gaussian States

Si-Hui Tan, Baris I. Erkmen, Vittorio Giovannetti +5 more

An optical transmitter irradiates a target region containing a bright thermal-noise bath in which a low-reflectivity object might be embedded. The light received from this region is used to decide whether the object is present or absent. The performance achieved using a coherent-state transmitter is compared with that of a quantum-illumination transmitter, i.e., one that employs the signal beam obtained from spontaneous parametric down-conversion. By making the optimum joint measurement on the light received from the target region together with the retained spontaneous parametric down-conversion idler beam, the quantum-illumination system realizes a 6 dB advantage in the error-probability exponent over the optimum reception coherent-state system. This advantage accrues despite there being no entanglement between the light collected from the target region and the retained idler beam.

arXiv:0810.0534•Physical Review Letters•Dec 18, 2008•694 citations

Quantum illumination for enhanced detection of Rayleigh-fading targets

Quntao Zhuang, Zheshen Zhang, Jeffrey H. Shapiro

Quantum illumination (QI) is an entanglement-enhanced sensing system whose performance advantage over a comparable classical system survives its usage in an entanglement-breaking scenario plagued by loss and noise. In particular, QI's error-probability exponent for discriminating between equally likely hypotheses of target absence or presence is 6 dB higher than that of the optimum classical system using the same transmitted power. This performance advantage, however, presumes that the target return, when present, has known amplitude and phase, a situation that seldom occurs in light detection and ranging (lidar) applications. At lidar wavelengths, most target surfaces are sufficiently rough that their returns are speckled, i.e., they have Rayleigh-distributed amplitudes and uniformly distributed phases. QI's optical parametric amplifier receiver---which affords a 3 dB better-than-classical error-probability exponent for a return with known amplitude and phase---fails to offer any performance gain for Rayleigh-fading targets. We show that the sum-frequency generation receiver [Zhuang et al., Phys. Rev. Lett. 118, 040801 (2017)]---whose error-probability exponent for a nonfading target achieves QI's full 6 dB advantage over optimum classical operation---outperforms the classical system for Rayleigh-fading targets. In this case, QI's advantage is subexponential: its error probability is lower than the classical system's by a factor of $1/ln(M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B})$, when $M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B}\ensuremath{\gg}1$, with $M\ensuremath{\gg}1$ being the QI transmitter's time-bandwidth product, ${N}_{S}\ensuremath{\ll}1$ its brightness, $\overline{\ensuremath{\kappa}}$ the target return's average intensity, and ${N}_{B}$ the background light's brightness.

arXiv:1706.05561•Physical Review A•Aug 15, 2017•52 citations

Not even 6 dB: Gaussian quantum illumination in thermal background

Tyler J. Volkoff

Abstract In analyses of target detection with Gaussian state transmitters in a thermal background, the thermal occupation is taken to depend on the target reflectivity in a way which simplifies the analysis of the symmetric quantum hypothesis testing problem. However, this assumption precludes comparison of target detection performance between an arbitrary transmitter and a vacuum state transmitter, i.e. ‘detection without illumination’, which is relevant in a bright thermal background because a target can be detected by its optical shadow or some other perturbation of the background. Using a target-agnostic thermal environment leads to the result that the oft-claimed 6 dB possible reduction in the quantum Chernoff exponent for a two-mode squeezed vacuum transmitter over a coherent state transmitter in high-occupation thermal background is an unachievable limiting value, only occurring in a limit in which the target detection problem is ill-posed. Further analyzing quantum illumination in a target-agnostic thermal environment shows that a weak single-mode squeezed transmitter performs worse than ‘no illumination’, which is explained by the noise-increasing property of reflected low-intensity squeezed light.

arXiv:2309.10071•Journal of Physics A Mathematical and Theoretical•Jan 12, 2024•6 citations

Quantum lidar scenario with simple detection

John Jeffers

Quantum Lidar is a future technology that can mean different things to different people. To some it means detection and identification of classical-type lidar signals reflected from an illuminated target at or near the single photon level. This is facilitated by advances in semiconductor detector technology that allow highly efficient photocounting. To others it is more stringent, requiring exploitation of covertness associated with being essentially undetectable by the target in a thermal background, whilst allowing the lidar operator to filter her own signal from this noise. Again there is nothing specifically quantum about this. Any source that mimics of the energy rate per bandwidth seen by the illuminated object in the direction of the source can appear covert. In order to exploit quantum optics one can use inherent correlations, whether entangled or otherwise between light beams. Simple correlated optical beams can do this in two ways, perhaps by storing one beam as a reference and later performing correlated detection with the return signal in a phase sensitive manner. This is the “gold standard” for quantum lidar, but will be difficult outside of laboratory situations. In microscopy such phase control might be possible, or perhaps in the radio or microwave region for a quantum radar. Less challenging is a scenario in which an immediate local measurement of one beam conditions the beam sent to the target, allowing the return signal to be sifted from noise more easily. Here we will consider such a simple system, providing a range equation for a basic quantum lidar if it is to be operated covertly or openly. Open operation allows increased quantum signal brightness but also provides a quantum advantage, unspoofability – the lidar operator can in principle recognise their own return signal. We will also provide an analysis of quantum lidar detection based on quantum hypothesis testing and use this to perform Monte Carlo simulation of both target detections and false positive avoidance in a noisy background. The theory will be applied to experimental data.

Emerging Imaging and Sensing Technologies for Security and Defence; and Advanced Manufacturing Technologies for Micro- and Nanosystems in Security and Defence•Sep 18, 2020•1 citation
An active optical sensor probes a region of free space that is engulfed in bright thermal noise to determine the presence (or absence) of a weakly reflecting target. The returned light (which is just thermal noise if no target is present, and thermal noise plus a weak reflection of the probe beam if a target is present) is measured and processed by a receiver and a decision is made on whether a target is present. It has been shown that generating an entangled pair of photons (which is a highly nonclassical state of light), using one photon as the probe beam and storing the other photon for comparison to the returned light, has superior performance to the traditional classical-light (coherent-state) target detection sensors. An entangled-photon transmitter and optimal receiver combination can yield up to a factor of 4 (i.e., 6 dB) gain in the error-probability exponent over a coherent state transmitter and optimal receiver combination, in a highly lossy and noisy scenario (when both sensors have the same number of transmitted photons). However, the receiver that achieves this advantage is not known. One structured receiver can close half of the 6-dB gap (i.e., a 3-dB improvement). It is based on phase-conjugating the returned light, then performing dual-balanced difference detection with the stored half of the entangled-photon pair. Active optical sensors are of tremendous value to NASA s missions. Although this work focuses on target detection, it can be extended to imaging (2D, 3D, hyperspectral, etc.) scenarios as well, where the image quality can be better than that offered by traditional active sensors. Although the current work is theoretical, NASA s future missions could benefit significantly from developing and demonstrating this capability. This is an optical receiver design whose components are, in principle, all implementable. However, the work is currently entirely theoretical. It is necessary to: 1. Demonstrate a bench-top proof of the theoretical principle, 2. Create an operational prototype off-the-bench, and 3. Build a practical sensor that can fly in a mission.
The signal half of an entangled twin beam, generated using spontaneous parametric downconversion, interrogates a region of space that is suspected of containing a target and has high loss and high (entanglement-breaking) background noise. A joint measurement is performed on the returned light and the idler beam that was retained at the transmitter. An optimal quantum receiver, whose implementation is not yet known, was shown to achieve 6 dB gain in the error-probability exponent relative to that achieved with a single coherent-state (classical) laser transmitter and the optimum receiver. We present two structured optical receivers that achieve up to 3 dB gain in the error exponent over that attained with the classical sensor. These are designs of quantum-optical sensors for target detection, which can be readily implemented in a proof-of-concept experiment, that appreciably outperform the best classical sensor in the low-signal-brightness, high-loss, and high-noise operating regime.
An optical transmitter that uses entangled light generated by spontaneous parametric downconversion (SPDC), in conjunction with an optimal quantum-optical receiver (whose implementation is not yet known) is in principle capable of obtaining up to a 6 dB gain in the error-probability exponent over the optimum-reception un-entangled coherent-state lidar to detect the presence of a far-away target subject to entanglement-breaking loss and noise in the free-space link . We present an explicit design of a structured quantum-illumination receiver, which in conjunction with the SPDC transmitter is shown to achieve up to a 3 dB error-exponent advantage over the classical sensor. Apart from being fairly feasible for a proof-of-principle demonstration, this is to our knowledge the first structured design of a quantum-optical sensor for target detection that outperforms the comparable best classical lidar sensor appreciably in a low-brightness, lossy and noisy operating regime.
An optical transmitter irradiates a target region containing a bright thermal-noise bath in which a low-reflectivity object might be embedded. The light received from this region is used to decide whether the object is present or absent. The performance achieved using a coherent-state transmitter is compared with that of a quantum-illumination transmitter, i.e., one that employs the signal beam obtained from spontaneous parametric down-conversion. By making the optimum joint measurement on the light received from the target region together with the retained spontaneous parametric down-conversion idler beam, the quantum-illumination system realizes a 6 dB advantage in the error-probability exponent over the optimum reception coherent-state system. This advantage accrues despite there being no entanglement between the light collected from the target region and the retained idler beam.
Quantum illumination (QI) is an entanglement-enhanced sensing system whose performance advantage over a comparable classical system survives its usage in an entanglement-breaking scenario plagued by loss and noise. In particular, QI's error-probability exponent for discriminating between equally likely hypotheses of target absence or presence is 6 dB higher than that of the optimum classical system using the same transmitted power. This performance advantage, however, presumes that the target return, when present, has known amplitude and phase, a situation that seldom occurs in light detection and ranging (lidar) applications. At lidar wavelengths, most target surfaces are sufficiently rough that their returns are speckled, i.e., they have Rayleigh-distributed amplitudes and uniformly distributed phases. QI's optical parametric amplifier receiver---which affords a 3 dB better-than-classical error-probability exponent for a return with known amplitude and phase---fails to offer any performance gain for Rayleigh-fading targets. We show that the sum-frequency generation receiver [Zhuang et al., Phys. Rev. Lett. 118, 040801 (2017)]---whose error-probability exponent for a nonfading target achieves QI's full 6 dB advantage over optimum classical operation---outperforms the classical system for Rayleigh-fading targets. In this case, QI's advantage is subexponential: its error probability is lower than the classical system's by a factor of $1/ln(M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B})$, when $M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B}\ensuremath{\gg}1$, with $M\ensuremath{\gg}1$ being the QI transmitter's time-bandwidth product, ${N}_{S}\ensuremath{\ll}1$ its brightness, $\overline{\ensuremath{\kappa}}$ the target return's average intensity, and NB{N}_{B}NB​ the background light's brightness.
Abstract In analyses of target detection with Gaussian state transmitters in a thermal background, the thermal occupation is taken to depend on the target reflectivity in a way which simplifies the analysis of the symmetric quantum hypothesis testing problem. However, this assumption precludes comparison of target detection performance between an arbitrary transmitter and a vacuum state transmitter, i.e. ‘detection without illumination’, which is relevant in a bright thermal background because a target can be detected by its optical shadow or some other perturbation of the background. Using a target-agnostic thermal environment leads to the result that the oft-claimed 6 dB possible reduction in the quantum Chernoff exponent for a two-mode squeezed vacuum transmitter over a coherent state transmitter in high-occupation thermal background is an unachievable limiting value, only occurring in a limit in which the target detection problem is ill-posed. Further analyzing quantum illumination in a target-agnostic thermal environment shows that a weak single-mode squeezed transmitter performs worse than ‘no illumination’, which is explained by the noise-increasing property of reflected low-intensity squeezed light.
Quantum Lidar is a future technology that can mean different things to different people. To some it means detection and identification of classical-type lidar signals reflected from an illuminated target at or near the single photon level. This is facilitated by advances in semiconductor detector technology that allow highly efficient photocounting. To others it is more stringent, requiring exploitation of covertness associated with being essentially undetectable by the target in a thermal background, whilst allowing the lidar operator to filter her own signal from this noise. Again there is nothing specifically quantum about this. Any source that mimics of the energy rate per bandwidth seen by the illuminated object in the direction of the source can appear covert. In order to exploit quantum optics one can use inherent correlations, whether entangled or otherwise between light beams. Simple correlated optical beams can do this in two ways, perhaps by storing one beam as a reference and later performing correlated detection with the return signal in a phase sensitive manner. This is the “gold standard” for quantum lidar, but will be difficult outside of laboratory situations. In microscopy such phase control might be possible, or perhaps in the radio or microwave region for a quantum radar. Less challenging is a scenario in which an immediate local measurement of one beam conditions the beam sent to the target, allowing the return signal to be sifted from noise more easily. Here we will consider such a simple system, providing a range equation for a basic quantum lidar if it is to be operated covertly or openly. Open operation allows increased quantum signal brightness but also provides a quantum advantage, unspoofability – the lidar operator can in principle recognise their own return signal. We will also provide an analysis of quantum lidar detection based on quantum hypothesis testing and use this to perform Monte Carlo simulation of both target detections and false positive avoidance in a noisy background. The theory will be applied to experimental data.