This poster was presented at NanoAfrica 2026 (Poster #31, 21 October 2026, Nelson Mandela University, Gqeberha, South Africa). It reports a pilot project of the NMU Quantum Computing Society. The project shows that a full hybrid quantum–classical chemistry workflow can be carried out at Nelson Mandela University, from classical electronic-structure calculations through to execution on real IBM quantum hardware. The poster is a workflow demonstration and a learning exercise. It makes no claim of methodological novelty or of quantum advantage. Workflow demonstrated Model systems: small stoichiometric (MoS₂)ₙ clusters (n = 1, 3) used as model fragments of MoS₂ quantum dots. Geometries were optimised at the PBE/def2-SVP level in PySCF. Classical references: PBE, PBE0 and HSE06 HOMO–LUMO gaps, Hartree–Fock, CASSCF and CASCI. CASCI in a (4e,4o) active space serves as the exact reference. Qubit Hamiltonian: Jordan–Wigner mapping in CASCI natural orbitals with PennyLane, giving 8 qubits, 193 Pauli terms and 44 measurement groups. Ansätze: UCCSD and GateFabric as benchmarks, plus ADAPT-VQE to obtain compact, hardware-friendly circuits. Noise-aware simulation: shot-based simulation with IBM Heron noise models, using readout correction (TREX) and zero-noise extrapolation (ZNE). Hardware execution: energy evaluation on the 156-qubit IBM Heron r2 processor ibm_kingston through the IBM Quantum Open Plan. Main observations For MoS₂, a compact ADAPT-VQE circuit with 6 two-qubit gates came within 0.70 mHa of the CASCI reference. UCCSD needed about 540 two-qubit gates. In the noise-model simulation, error mitigation reduced the error from 23.6 mHa to 0.6 ± 0.7 mHa. On real hardware (ibm_kingston), TREX + ZNE reduced the error from 123.1 ± 7.3 mHa to 25.8 ± 14.4 mHa. This shows that mitigation works on current devices, but the result is not yet at chemical accuracy (1.6 mHa). Scope and limitations: the clusters are small models, not full quantum dots. The errors quoted are total energies relative to CASCI in the same active space. Every circuit used is classically simulable. The work is intended as a reproducible starting point for quantum-computing-in-chemistry research and training at NMU. Acknowledgements: We acknowledge the Centre for High Performance Computing (CHPC), South Africa, for its support of computational research (Project: CHEM0864). We acknowledge the use of IBM Quantum services for this work. The views expressed are those of the authors and do not reflect the official policy or position of IBM or the IBM Quantum team. We also thank Nelson Mandela University, NITheCS, the NMU Quantum Computing Society and the African Quantum Consortium. Code and data: the analysis scripts, result files and figures are available in the accompanying MoS2_VQE_pipeline repository.
This poster was presented at NanoAfrica 2026 (Poster #31, 21 October 2026, Nelson Mandela University, Gqeberha, South Africa). It reports a pilot project of the NMU Quantum Computing Society. The project shows that a full hybrid quantum–classical chemistry workflow can be carried out at Nelson Mandela University, from classical electronic-structure calculations through to execution on real IBM quantum hardware. The poster is a workflow demonstration and a learning exercise. It makes no claim of methodological novelty or of quantum advantage. Workflow demonstrated Model systems: small stoichiometric (MoS₂)ₙ clusters (n = 1, 3) used as model fragments of MoS₂ quantum dots. Geometries were optimised at the PBE/def2-SVP level in PySCF. Classical references: PBE, PBE0 and HSE06 HOMO–LUMO gaps, Hartree–Fock, CASSCF and CASCI. CASCI in a (4e,4o) active space serves as the exact reference. Qubit Hamiltonian: Jordan–Wigner mapping in CASCI natural orbitals with PennyLane, giving 8 qubits, 193 Pauli terms and 44 measurement groups. Ansätze: UCCSD and GateFabric as benchmarks, plus ADAPT-VQE to obtain compact, hardware-friendly circuits. Noise-aware simulation: shot-based simulation with IBM Heron noise models, using readout correction (TREX) and zero-noise extrapolation (ZNE). Hardware execution: energy evaluation on the 156-qubit IBM Heron r2 processor ibm_kingston through the IBM Quantum Open Plan. Main observations For MoS₂, a compact ADAPT-VQE circuit with 6 two-qubit gates came within 0.70 mHa of the CASCI reference. UCCSD needed about 540 two-qubit gates. In the noise-model simulation, error mitigation reduced the error from 23.6 mHa to 0.6 ± 0.7 mHa. On real hardware (ibm_kingston), TREX + ZNE reduced the error from 123.1 ± 7.3 mHa to 25.8 ± 14.4 mHa. This shows that mitigation works on current devices, but the result is not yet at chemical accuracy (1.6 mHa). Scope and limitations: the clusters are small models, not full quantum dots. The errors quoted are total energies relative to CASCI in the same active space. Every circuit used is classically simulable. The work is intended as a reproducible starting point for quantum-computing-in-chemistry research and training at NMU. Acknowledgements: We acknowledge the Centre for High Performance Computing (CHPC), South Africa, for its support of computational research (Project: CHEM0864). We acknowledge the use of IBM Quantum services for this work. The views expressed are those of the authors and do not reflect the official policy or position of IBM or the IBM Quantum team. We also thank Nelson Mandela University, NITheCS, the NMU Quantum Computing Society and the African Quantum Consortium. Code and data: the analysis scripts, result files and figures are available in the accompanying MoS2_VQE_pipeline repository.
High Resolution Image Download MS PowerPoint Slide We investigate the variational quantum eigensolver (VQE) for estimating the ground-state energy of the BeH 2 molecule, emphasizing practical implementation and performance on current quantum hardware. Our research presents a comparative study of HEA and UCCSD ansätze on noiseless and noisy simulations and implements VQE on recent IBM quantum computer noise models and a real quantum computer, IBM Fez, providing a fully functional code employing Qiskit 1.2 . Our experiments confirm UCCSD’s reliability in ideal conditions, while the HEA demonstrates greater robustness to hardware noise, achieving chemical accuracy on state-vector simulation (SVS). The results reveal that achieving ground-state energy within chemical accuracy is feasible without error mitigation during VQE convergence. We demonstrate that current quantum devices effectively optimize circuit parameters despite misestimating simulated energies. The SVS-evaluated energies provide a more accurate representation of the solution quality compared to QPU-estimated energy values, indicating that VQE converges to the correct ground state despite quantum noise. Our study also applies noise mitigation as a postprocessing technique, using zero-noise extrapolation (ZNE) on a real quantum computer. The detailed methodologies presented in this study, including Hamiltonian construction and Fermionic-to-qubit transformations, facilitate flexible adaptation of the VQE approach for various algorithm variants and across different levels of algorithmic implementation.
This study investigates the Variational Quantum Eigensolver (VQE), a hybrid quantum-classical algorithm that partitions the computational workload between a quantum processing unit and a classical optimiser to determine the ground-state energies of molecular systems. The Qiskit SDK v1.x framework is employed, utilising the PySCFDriver module within the qiskit-nature package to construct second-quantised molecular electronic Hamiltonians for two representative systems: Hydrogen ( ) and Lithium Hydride ( ). For the complete active space is retained without spatial reduction, mapping the full Hamiltonian onto a 4-qubit register. However for the full STO-3G representation demands 12 qubits, rendering direct classical parameter optimisation computationally intractable. This bottleneck is resolved by applying an ActiveSpaceTransformer (num_electrons=2, num_spatial_orbitals=3) to freeze the chemically inactive lithium core electrons, reducing the active register to 6 qubits. Fermionic operators are subsequently converted to Pauli strings via the Jordan-Wigner transformation ( ) enabling the quantum processor to evaluate the molecular Hamiltonian as a circuit while preserving the fermionic anti-commutation relations. Under ideal, noise-free simulation using the StatevectorEstimator primitive paired with the COBYLA optimiser (maxiter=200), all VQE energy points converge precisely onto the Full Configuration Interaction (FCI) classical baseline across the full range of interatomic separations. This confirms that the hardware-efficient TwoLocal ansatz ( rotation layers and entanglement layers with reps=3) possesses sufficient expressive power to capture the molecular ground-state wavefunction. Introducing gate-level noise through AerSimulator backends calibrated from the FakeManilaV2 and FakeNairobiV2 hardware profiles—with optimisation driven by the SPSA algorithm (maxiter=150)—reveals two critical failure modes. A systematic upward energy bias is observed, attributable to depolarising gate errors and measurement readout faults that prevent the optimiser from reaching the true minimum energy eigenvalue. Additionally, severe stochastic oscillations between 1.0 Å and 1.5 Å on the curve induce premature convergence of the SPSA optimiser to spurious local minima. These results demonstrate that unmitigated hardware noise renders VQE incapable of reliably predicting equilibrium bond lengths on current NISQ devices, motivating the future integration of Zero-Noise Extrapolation (ZNE), readout error mitigation, and Virtual Distillation into the computational pipeline. Keywords—Variational Quantum Eigensolver (VQE); Qiskit 1.x; Potential Energy Curve; Molecular Ground-State Energy; Hardware-Efficient Ansatz; Gate-Level Noise Simulation; ActiveSpaceTransformer; NISQ Devices.
This presentation was given at the 45th SACI National Convention of the South African Chemical Institute, themed “Chemistry: A Window for Change.” It surveys Python-based quantum chemistry software in 2025 and asks how GPU acceleration, cloud access to quantum hardware, and interactive teaching platforms can be brought into chemistry education and research, especially in African institutions. Contents: Foundations. The quantum mechanical basis of computational chemistry and its main approximations: Born–Oppenheimer, Hartree–Fock, DFT, perturbation theory and coupled cluster. How method and basis set together define a “level of theory.” Where computational and data-driven chemistry sit among the paradigms of science, from empirical through computational to data-driven and AI. The software landscape. Quantum chemistry codes available through South Africa’s Centre for High Performance Computing (CHPC), and the Python ecosystem around MolSSI QCArchive (QCEngine, QCFractal, QCPortal). These give students one interface that works across many electronic-structure programs. Why quantum computing. The caffeine example shows how exact molecular simulation quickly outgrows classical resources, which motivates qubit-based approaches. The talk compares major quantum hardware and cloud providers on educational access and African partnerships, and gives an overview of Africa’s software-first quantum strategy. GPU-accelerated quantum chemistry. GPU4PySCF (v1.4.0, April 2025): reported speedups of up to about 1000× for density-fitting algorithms over single-core PySCF, and 20–50× for general DFT over a 32-core CPU node. CPU–GPU switching through to_gpu() / to_cpu(), and example applications. Educational platforms and pedagogy. Cloud quantum education programmes (IBM Quantum, Microsoft Azure Quantum, Google Quantum AI, QubitxQubit), interactive Jupyter-based teaching (eChem), and the main barriers to teaching quantum chemistry with matching technological fixes. A staged learning pathway runs from traditional theory through Python, interactive notebooks, GPU computing and real quantum hardware (e.g., VQE) to research integration. Applications and outlook. Industry case studies in drug discovery, energy and materials. Strategic recommendations for bringing GPU acceleration, quantum hardware access and proven educational platforms into quantum chemistry training. Author: Cyprian B. Moyo, Nelson Mandela University and National Institute for Theoretical and Computational Sciences (NITheCS), South Africa. Acknowledgements: CHPC/NICIS, NITheCS, the Wits Quantum Initiative (WitsQ), and IBM Quantum.
Electronic structure calculations become computationally expensive on classical computers as electron correlation increases. Quantum computing offers a promising alternative through hybrid quantum-classical Variational Quantum Eigensolver (VQE) on Noisy-Intermediate Scale Quantum (NISQ) devices. The choice of ansatz plays a pivotal role in the performance and scalability of the VQE, yet selecting an optimal ansatz remains challenging. Existing approaches including chemically inspired ansatz, adaptive schemes and Hardware Efficient Ansätze (HEA) lack a unified comparison. This gap makes the scalability and trade-offs of each method unclear for varying molecular sizes. This work presents a systematic benchmarking study comparing Unitary Couples Cluster Singles and Doubles Ansatz (UCCSD), fermionic ADAPT-VQE, BasicPCA HEA, and Excitation Preserving HEA across molecules of varying size like H2, LiH, N2. We evaluate trade-offs among circuit depth, parameter count, ground-state energy error, and NISQ feasibility. ADAPT-VQE achieves accuracy comparable to UCCSD with lower resource overhead, but becomes impractical for modest system sizes ($\sim$10 electrons) due to increasing circuit complexity. In contrast, HEA reduces hardware costs but requires more parameters and sacrifices accuracy, with performance strongly dependent on molecular size. The Excitation Preserving ansatz remains below chemical accuracy for H2 and LiH, and fails for N2, underscoring the need to balance expressibility and trainability. Overall, these results highlight key trade-offs between accuracy and resource efficiency across VQE ansätze, emphasizing the need to improve ADAPT-VQE scalability and HEA accuracy while addressing optimization challenges for near-term quantum hardware.
Abstract Quantum computers promise to solve electronic structure, lattice dynamics, and strongly correlated problems beyond classical reach. However, near-term noisy intermediate scale quantum (NISQ) processors require systematic benchmarking to establish where variational algorithms with error mitigation can achieve chemical accuracy and cor rectly predict physical phenomena. Here we present 28 quantum material simula tions implemented with Qiskit, spanning molecular hydrogen (H 2 ) through the iron molybdenum cofactor (FeMoco), one-dimensional Hubbard chains, Kitaev honeycomb spin liquids, topological insulators (SSH model), BCS superconductors, and disordered Anderson insulators. Using the variational quantum eigensolver (VQE) with UCCSD ansatz, we achieve chemical accuracy (±1.6 mHa) for H 2 across the full dissociation curve and recover exact ground-state energies for H4 within 9 mHa after zero-noise extrapolation (ZNE) — reducing raw VQE errors from 152 mHa to 9 mHa. We accu rately identify the transverse-field Ising quantum critical point (h c = J) with 4 qubits, resolve Majorana Dirac dispersions in the Kitaev spin liquid, and reproduce the Mott transition in the Fermi-Hubbard model at U c = 6t. Resource estimation for FeMoco reveals O(N 2.5 ) scaling, projecting chemical accuracy with ∼200 logical qubits. Across all benchmarks, we quantify the accuracy-circuit depth tradeoff, demonstrating that depth-6 VQE ans¨atze achieve chemical accuracy for small molecules while depth-10 is required for correlated lattices. These results establish a comprehensive benchmark suite for evaluating quantum hardware, error mitigation protocols, and variational al gorithms for materials science on NISQ processors.
We present a large-scale experimental study of quantum-computing-based molecular simulation carried out on IQM's Sirius 24-qubit superconducting processor, utilizing up to 16 operational qubits. The work employs Sample-based Quantum Diagonalization (SQD) together with the Local Unitary Cluster Jastrow (LUCJ) ansatz to estimate ground-state energies for a set of benchmark molecules, including H2, LiH, BeH2, H2O, and NH3. In addition, we introduce a Linear-CNOT variant of the Unitary Coupled-Cluster Singles and Doubles (LCNot-UCCSD) ansatz within the SQD workflow, trading higher circuit depth for reduced classical preprocessing. A comparison between these ansätze is provided, clarifying their respective strengths, limitations, and suitability for near-term quantum hardware. We further explore potential energy landscapes through 1D scans for H2 and HeH+ using both STO-3G and 6-31G basis sets, and for LiH and BeH2 in STO-3G. Extending beyond this, we demonstrate the experimental construction of a full 2D potential energy surface for the water molecule on quantum hardware, mapped over a 32 × 32 grid in bond length and bond angle. To move beyond small benchmark systems, we combine SQD(LUCJ) with Density Matrix Embedding Theory (DMET) to compute active-space energies for a set of ligand-like molecules, as well as the pharmacologically relevant amantadine system. Across all studies, the majority of quantum-computed energies agree with reference FCI results, as well as with DMET-CASCI energies for embedded systems, to within chemical accuracy for the chosen basis sets. These results demonstrate the reliability of sample-based diagonalization approaches and underscore the potential of hybrid embedding strategies for extending quantum simulations to increasingly complex molecular systems, while also highlighting their practicality on current IQM quantum hardware.