Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Entropy

Entropy-Based and Quadratic Conditional Innovation Metrics for Informed Dynamic Scheduling of Belief-Propagation Decoding for LDPC Codes

Tofar C.-Y. Chang, Chia-En Liu, Ying-Ren Jian, Di-Chun Liang

Published Nov 12, 2026• 0 citations
Publisher

Abstract

We propose two enhanced conditional innovation (CI) metrics for informed dynamic scheduling (IDS) in belief-propagation (BP) decoding of LDPC codes. The CI-based residual BP (CIRBP) algorithm uses the CI metric to guide the selection of the variable node (VN) to be updated and has been shown to outperform several existing IDS-based BP decoders, especially at the early decoding stage. However, the original CI metric uses only the absolute difference between the current and precomputed posterior probabilities and does not separately account for the reliability associated with each probability. By reformulating the CI metric relative to the decision boundary, we separate each posterior probability into its decision side and a linear-distance term reflecting reliability. Replacing the latter with the binary entropy complement yields the proposed entropy-based CI (E-CI) metric. Moreover, the proposed quadratic CI (Q-CI) metric is derived from the leading quadratic term in the local expansion of the entropy complement, avoiding the logarithmic operations required for direct E-CI evaluation. We apply both proposed metrics to the CIRBP decoder and its node-wise variant. Numerical results show that the proposed metrics generally provide lower frame error rates than the original CI metric, with their relative advantages depending on the code and decoding procedure.

DOI
10.3390/e28111246

Related papers

Belief-Propagation Decoding of LDPC Codes With Variable Node–Centric Dynamic Schedules

Tofar C.-Y. Chang, Pin-Han Wang, Jian-Jia Weng +2 more

Belief propagation (BP) decoding of low-density parity-check (LDPC) codes with various dynamic decoding schedules have been proposed to improve the efficiency of the conventional flooding schedule. As the ultimate goal of an ideal LDPC code decoder is to have correct bit decisions, a dynamic decoding schedule should be variable node (VN)-centric and be able to find the VNs with probable incorrect decisions and having a good chance to be corrected if chosen for update. We propose a novel and effective metric called conditional innovation (CI) which serves this design goal well. To make the most of dynamic scheduling which produces high-reliability bit decisions, we limit our search for the candidate VNs to those related to the latest updated nodes only. Based on the CI metric and the new search guideline separately or in combination, we develop several highly efficient decoding schedules. To reduce decoding latency, we introduce multi-edge updating versions which offer extra latency-performance tradeoffs. Numerical results show that both single-edge and multi-edge algorithms provide better decoding performance against most dynamic schedules and the CI-based algorithms are particularly impressive at the first few decoding iterations.

arXiv:2102.11089•IEEE Transactions on Communications•May 10, 2021•22 citations

Residual-Decaying-Based Informed Dynamic Scheduling for Belief-Propagation Decoding of LDPC Codes

Huilian Zhang, Shaoping Chen

Belief-propagation (BP) algorithm and its variants are well-established methods for iterative decoding of LDPC codes. Among them, residual belief-propagation (RBP), which is the most primitive and representative informed dynamic scheduling (IDS) strategy, can significantly accelerate the convergence speed. However, RBP decoding suffers from a poor convergence error-rate performance due to its greedy property, which is one of the challenging issues in the design of IDS strategies. To tackle this problem, a novel IDS scheme, namely residual-decaying-based residual belief-propagation (RD-RBP) algorithm, is presented in this paper. In RD-RBP, a decaying mechanism is introduced to manipulate the residuals of those check-to-variable messages, preventing the decoding resources from being unreasonably occupied by a small group of edges in the Tanner graph. The greediness is therefore alleviated and better performance of convergence error-rate is achieved. Besides, a two-stage scheduling scheme combining prior-art variable-node and variable-to-check-edge RBP (V-VCRBP) with RD-RBP, named V-VC-RD-RBP, is proposed for achieving both fast convergence speed and a low convergence error-rate. The simulation results validate the advantages of the proposed schemes.

IEEE Access•Jan 1, 2019•22 citations

Improved Decoding Algorithms of LDPC Codes Based on Reliability Metrics of Variable Nodes

Xingcheng Liu, Li'e Zi, Dong Yang +1 more

The informed dynamic scheduling (IDS) strategies for decoding of low-density parity-check codes obtained superior performance in error correction performance and convergence speed. However, there are still two problems existing in the current IDS algorithms. The first is that the current IDS algorithms only preferentially update the selected unreliable messages, but they do not guarantee the updating is performed with reliable information. In this paper, a two-step message selecting strategy is introduced. On the basis of the two reliability metrics and two types of variable node residuals, the residual belief propagation (BP) decoding algorithm, short for TRM-TVRBP, is proposed. With the algorithm, the reliability of the updating-messages can be improved. The second is the greediness problem, prevalently existed in the IDS-like algorithms. The problem arises mainly from the fact that the major computing resources are allocated to or concentrated on some nodes and edges. To overcome the problem, the reliability metric-based RBP algorithm (RM-RBP) is proposed, which can force every variable node to contribute its intrinsic information to the iterative decoding. At the same time, the algorithm can force the related variable nodes to be updated, and make every edge have an equal opportunity of being updated. The simulation results show that both the TRM-TVRBP and the RM-RBP have appealing convergence rate and error-correcting performance compared with the previous IDS decoders over the white Gaussian noise (AWGN) channel.

IEEE Access•Jan 1, 2019•14 citations

Reliability-Based-Layered Belief Propagation for Iterative Decoding of LDPC Codes

Rong Xia Sun, Xiaogeng Hou, Jingyuan Sun +2 more

Reliability-Based-Layered Belief Propagation (RBL-BP) decoding algorithm for LDPC codes is proposed in this paper. Being an informed dynamic schedule (IDS), it measures convergence and selects iterations by the absolute value of logarithmic likelihood ratio information obtained from channel (ABS-LLR-CH). Each variable node can select its own iterations by estimating its own convergence, and finish iterative decoding. Simulation results show that the proposed RBL-BP algorithm has better performance than those of flooding schedule, layered belief propagation (LBP) and variable-to-check residual belief propagation (VC-RBP). For the convergence property of IDS, the proposed algorithm has faster speed than those of flooding schedule and LBP with a little increase in complexity while it has almost no speed decrease with much lower computational complexity than VC-RBP.

IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2018•6 citations

Enhanced Informed Dynamic BP Decoding Scheduling Strategies for 5G NR LDPC Codes

Tofar C.-Y. Chang, I-Hsiang Lee, Pin-Han Wang +2 more

We present an enhanced informed dynamic scheduling (IDS) strategy to avoid propagations of unreliable messages in the residual belief-propagation (RBP) algorithm for decoding low-density parity-check (LDPC) codes. To reduce the resource needed for updating the degree-one variable nodes (VNs) in an RBP-based algorithm for decoding 5G New Radio (NR) LDPC codes, we further introduce a process consisting of several simple procedures for managing the resource consumption. Simulation results demonstrate that our RBP algorithm based on the proposed IDS strategy outperforms existing RBP-based algorithms at the early decoding iterations. By using our degree-one VN resource managing approach, the performance of both the proposed and the existing decoders is significantly improved in decoding the 5G NR codes.

arXiv:2611.09184•IEEE Vehicular Technology Conference•Sep 1, 2022•3 citations

Two Informed Dynamic Scheduling Strategies for Iterative LDPC Decoders

Huang–Chang Lee, Yeong-Luh Ueng, Shan-Ming Yeh +1 more

When residual belief-propagation (RBP), which is a kind of informed dynamic scheduling (IDS), is applied to low-density parity-check (LDPC) codes, the convergence speed in error-rate performance can be significantly improved. However, the RBP decoders presented in previous literature suffer from poor convergence error-rate performance due to the two phenomena explored in this paper. The first is the greedy-group phenomenon, which results in a small part of the decoding graph occupying most of the decoding resources. By limiting the number of updates for each edge message in the decoding graph, the proposed Quota-based RBP (Q-RBP) schedule can reduce the probability of greedy groups forming. The other phenomenon is the silent-variable-nodes issue, which is a condition where some variable nodes have no chance of contributing their intrinsic messages to the decoding process. As a result, we propose the Silent-Variable-Node-Free RBP (SVNF-RBP) schedule, which can force all variable nodes to contribute their intrinsic messages to the decoding process equally. Both the Q-RBP and the SVNF-RBP provide appealing convergence speed and convergence error-rate performance compared to previous IDS decoders for both dedicated and punctured LDPC codes.

IEEE Transactions on Communications•Feb 1, 2013•49 citations
We propose two enhanced conditional innovation (CI) metrics for informed dynamic scheduling (IDS) in belief-propagation (BP) decoding of LDPC codes. The CI-based residual BP (CIRBP) algorithm uses the CI metric to guide the selection of the variable node (VN) to be updated and has been shown to outperform several existing IDS-based BP decoders, especially at the early decoding stage. However, the original CI metric uses only the absolute difference between the current and precomputed posterior probabilities and does not separately account for the reliability associated with each probability. By reformulating the CI metric relative to the decision boundary, we separate each posterior probability into its decision side and a linear-distance term reflecting reliability. Replacing the latter with the binary entropy complement yields the proposed entropy-based CI (E-CI) metric. Moreover, the proposed quadratic CI (Q-CI) metric is derived from the leading quadratic term in the local expansion of the entropy complement, avoiding the logarithmic operations required for direct E-CI evaluation. We apply both proposed metrics to the CIRBP decoder and its node-wise variant. Numerical results show that the proposed metrics generally provide lower frame error rates than the original CI metric, with their relative advantages depending on the code and decoding procedure.
Belief propagation (BP) decoding of low-density parity-check (LDPC) codes with various dynamic decoding schedules have been proposed to improve the efficiency of the conventional flooding schedule. As the ultimate goal of an ideal LDPC code decoder is to have correct bit decisions, a dynamic decoding schedule should be variable node (VN)-centric and be able to find the VNs with probable incorrect decisions and having a good chance to be corrected if chosen for update. We propose a novel and effective metric called conditional innovation (CI) which serves this design goal well. To make the most of dynamic scheduling which produces high-reliability bit decisions, we limit our search for the candidate VNs to those related to the latest updated nodes only. Based on the CI metric and the new search guideline separately or in combination, we develop several highly efficient decoding schedules. To reduce decoding latency, we introduce multi-edge updating versions which offer extra latency-performance tradeoffs. Numerical results show that both single-edge and multi-edge algorithms provide better decoding performance against most dynamic schedules and the CI-based algorithms are particularly impressive at the first few decoding iterations.
Belief-propagation (BP) algorithm and its variants are well-established methods for iterative decoding of LDPC codes. Among them, residual belief-propagation (RBP), which is the most primitive and representative informed dynamic scheduling (IDS) strategy, can significantly accelerate the convergence speed. However, RBP decoding suffers from a poor convergence error-rate performance due to its greedy property, which is one of the challenging issues in the design of IDS strategies. To tackle this problem, a novel IDS scheme, namely residual-decaying-based residual belief-propagation (RD-RBP) algorithm, is presented in this paper. In RD-RBP, a decaying mechanism is introduced to manipulate the residuals of those check-to-variable messages, preventing the decoding resources from being unreasonably occupied by a small group of edges in the Tanner graph. The greediness is therefore alleviated and better performance of convergence error-rate is achieved. Besides, a two-stage scheduling scheme combining prior-art variable-node and variable-to-check-edge RBP (V-VCRBP) with RD-RBP, named V-VC-RD-RBP, is proposed for achieving both fast convergence speed and a low convergence error-rate. The simulation results validate the advantages of the proposed schemes.
The informed dynamic scheduling (IDS) strategies for decoding of low-density parity-check codes obtained superior performance in error correction performance and convergence speed. However, there are still two problems existing in the current IDS algorithms. The first is that the current IDS algorithms only preferentially update the selected unreliable messages, but they do not guarantee the updating is performed with reliable information. In this paper, a two-step message selecting strategy is introduced. On the basis of the two reliability metrics and two types of variable node residuals, the residual belief propagation (BP) decoding algorithm, short for TRM-TVRBP, is proposed. With the algorithm, the reliability of the updating-messages can be improved. The second is the greediness problem, prevalently existed in the IDS-like algorithms. The problem arises mainly from the fact that the major computing resources are allocated to or concentrated on some nodes and edges. To overcome the problem, the reliability metric-based RBP algorithm (RM-RBP) is proposed, which can force every variable node to contribute its intrinsic information to the iterative decoding. At the same time, the algorithm can force the related variable nodes to be updated, and make every edge have an equal opportunity of being updated. The simulation results show that both the TRM-TVRBP and the RM-RBP have appealing convergence rate and error-correcting performance compared with the previous IDS decoders over the white Gaussian noise (AWGN) channel.
Reliability-Based-Layered Belief Propagation (RBL-BP) decoding algorithm for LDPC codes is proposed in this paper. Being an informed dynamic schedule (IDS), it measures convergence and selects iterations by the absolute value of logarithmic likelihood ratio information obtained from channel (ABS-LLR-CH). Each variable node can select its own iterations by estimating its own convergence, and finish iterative decoding. Simulation results show that the proposed RBL-BP algorithm has better performance than those of flooding schedule, layered belief propagation (LBP) and variable-to-check residual belief propagation (VC-RBP). For the convergence property of IDS, the proposed algorithm has faster speed than those of flooding schedule and LBP with a little increase in complexity while it has almost no speed decrease with much lower computational complexity than VC-RBP.
We present an enhanced informed dynamic scheduling (IDS) strategy to avoid propagations of unreliable messages in the residual belief-propagation (RBP) algorithm for decoding low-density parity-check (LDPC) codes. To reduce the resource needed for updating the degree-one variable nodes (VNs) in an RBP-based algorithm for decoding 5G New Radio (NR) LDPC codes, we further introduce a process consisting of several simple procedures for managing the resource consumption. Simulation results demonstrate that our RBP algorithm based on the proposed IDS strategy outperforms existing RBP-based algorithms at the early decoding iterations. By using our degree-one VN resource managing approach, the performance of both the proposed and the existing decoders is significantly improved in decoding the 5G NR codes.
When residual belief-propagation (RBP), which is a kind of informed dynamic scheduling (IDS), is applied to low-density parity-check (LDPC) codes, the convergence speed in error-rate performance can be significantly improved. However, the RBP decoders presented in previous literature suffer from poor convergence error-rate performance due to the two phenomena explored in this paper. The first is the greedy-group phenomenon, which results in a small part of the decoding graph occupying most of the decoding resources. By limiting the number of updates for each edge message in the decoding graph, the proposed Quota-based RBP (Q-RBP) schedule can reduce the probability of greedy groups forming. The other phenomenon is the silent-variable-nodes issue, which is a condition where some variable nodes have no chance of contributing their intrinsic messages to the decoding process. As a result, we propose the Silent-Variable-Node-Free RBP (SVNF-RBP) schedule, which can force all variable nodes to contribute their intrinsic messages to the decoding process equally. Both the Q-RBP and the SVNF-RBP provide appealing convergence speed and convergence error-rate performance compared to previous IDS decoders for both dedicated and punctured LDPC codes.