Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Design Blueprint: Optical Depth Required for Efficient Electromagnetically Induced Transparency Photon Storage

William Alexander Aldred

Published Nov 12, 2026• 0 citations
Publisher

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159508): Storing a photon as a collective excitation in an atomic ensemble succeeds with a probability that rises with optical depth and falls with decoherence during the storage interval. Optical depth is therefore the first design number for an electromagnetically induced transparency memory. This study computes the quantities that follow from stated assumptions for a rubidium ensemble, control-field optimised at each optical depth, ground-state coherence times of 100 microseconds and 1 millisecond, using the relations set out in the Methods. The headline results are efficiency at d 20 = 0.9773, efficiency at d 100 = 0.9999, depth for 90pct = 8.819, eff d100 with 100us coherence = 0.8187, eff d100 with 1ms coherence = 0.9801. The central question is stated as follows: What optical depth gives ninety percent storage-and-retrieval efficiency in the standard model, and how does a finite ground-state coherence time change that requirement for a ten-microsecond storage? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory memories report efficiencies from a few percent to above eighty percent, with the highest values in high-optical-depth cold ensembles and cavities. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

DOI
10.5281/zenodo.24160310

Related papers

Optical Depth Required for Efficient Electromagnetically Induced Transparency Photon Storage

William Alexander Aldred

Storing a photon as a collective excitation in an atomic ensemble succeeds with a probability that rises with optical depth and falls with decoherence during the storage interval. Optical depth is therefore the first design number for an electromagnetically induced transparency memory. This study computes the quantities that follow from stated assumptions for a rubidium ensemble, control-field optimised at each optical depth, ground-state coherence times of 100 microseconds and 1 millisecond, using the relations set out in the Methods. The headline results are efficiency at d 20 = 0.9773, efficiency at d 100 = 0.9999, depth for 90pct = 8.819, eff d100 with 100us coherence = 0.8187, eff d100 with 1ms coherence = 0.9801. The central question is stated as follows: What optical depth gives ninety percent storage-and-retrieval efficiency in the standard model, and how does a finite ground-state coherence time change that requirement for a ten-microsecond storage? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory memories report efficiencies from a few percent to above eighty percent, with the highest values in high-optical-depth cold ensembles and cavities. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.

•Nov 12, 2026•1 citation

Design Blueprint: Bandwidth and Noise Budget for an Off-Resonant Raman Single-Photon Memory

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159685): An off-resonant Raman memory trades optical depth and control energy for bandwidth: it can accept short photons that a narrowband memory cannot, at the price of a noise floor set by spontaneous scattering from the control field. This study computes the quantities that follow from stated assumptions for a warm caesium vapour Raman memory, photon duration 1 ns, detuning 1 to 5 GHz, control energies spanning an order of magnitude, using the relations set out in the Methods. The headline results are efficiency E4 D2 = 0.8347, noise E4 D2 = 0.08, efficiency E10 D5 = 0.5132, noise E10 D5 = 5.120e-03, bandwidth E4 D2 GHz = 1.5. Further computed values are operating points meeting both = 1. The central question is stated as follows: For stated control pulse energies and detunings, what acceptance bandwidth, storage efficiency and noise photons per pulse follow, and is there an operating point with efficiency above one half and noise below one hundredth of a photon? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Raman memories have demonstrated gigahertz bandwidths with efficiencies of tens of percent and noise levels that remain the main obstacle to single-photon operation. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 12, 2026•0 citations

Optical storage with electromagnetically induced transparency in a dense cold atomic ensemble

Shanchao Zhang, Shuyu Zhou, M. M. T. Loy +2 more

We experimentally investigate optical storage with electromagnetically induced transparency in a dense cold (85)Rb atomic ensemble. By varying the optical depth (OD) from 0 to 140, we observe that the optimal storage efficiency has a saturation value of 50% as OD>50. Our result is consistent with that obtained from hot vapor cell experiments.

Optics Letters•Nov 21, 2011•59 citations

High-efficiency quantum memory for photonic polarization qubits in a spatially-multiplexed dense cold atomic ensemble

Kun Huang, Pierre Vernaz-Gris, Mingtao Cao +2 more

Quantum storage of flying optical qubits, namely coherently mapping photonic states into and out of an optically controlled memory on demand, constitutes an essential component in the optical quantum information processing science, with applications to long-distance optical communication [1]. In this context, practical protocols require sufficiently large storage efficiency to achieve a performance better than direct transmission. Theoretically, the storage and retrieval efficiency can only be improved with the increase of the optical depth (OD). Recent progresses have shown that high OD media enable to reach high-efficiency electromagnetically induced transparency (EIT)-based optical storage, albeit without the demonstration of qubit storage [2, 3]. Here we experimentally implement an optical quantum memory with single-photon-level probes, showing a EIT-based storage efficiency around 70%. Furthermore, thanks to the spatial multiplexing of the dense atomic ensemble, highly efficient storage of polarization qubit is performed.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2017•1 citation

Highly-efficient optical storage of two orthogonal polarization modes in a cold atom ensemble

Yafei Wen, Shengzhi Wang, Xu Zhong-Xiao +2 more

Optical quantum memory plays an important role in scaling-up linear optical quantum computations and longdistance quantum communication. For effectively realizing such tasks, a long-lived and highly-efficient quantum memory is needed. The dynamic electromagnetically-induced-transparency (EIT) process can be used for completing an absorptive storage scheme in an atomic ensemble. In such a process, the quantum states of coming single photons can be coherently transformed into spin waves associated with coherences between atomic ground levels via switching off controlling light beam. For storing a single-mode optical signal, a pair of ground levels is involved. While for storing an optical polarization qubit, i.e., two orthogonal polarization modes, the coherence between two pairs of ground levels will be involved. Also, to obtain a high efficiency in the EIT optical storage, the optical-depth of the cold ensemble should be high. For prolonging the coherent time of the spin waves stored in atomic ensemble, decoherence between spin waves due to atomic motion and non-uniform Zeeman shift of ground levels should be effectively suppressed. Recently, a long-lived and highly-efficient optical quantum memory for single-mode storage in a high-optical-depth cold atom ensemble has been experimentally demonstrated via the gradient echo memory scheme (2016 Optical 3 100). While, for the optical polarization qubit storage, a long lifetime (in ms) and high-fidelity EIT storage experiment has been achieved by our group, but the storage efficiency in the experiment is very low (8%) due to lower optical depth of the cold ensemble (2013 Phys. Rev. Lett. 111 240503). The storage efficiency in long-lived storage of two orthogonal polarization modes still needs further improving. Here in this paper we demonstrate an experiment of long-lived and highly-efficient storage of two optical orthogonal polarization modes in a high optical-depth cold atomic ensemble via dynamic EIT process. For achieving a long lifetime in the storage experiment, we follow the two steps, which are used in our previous work (2013 Phys. Rev. Lett. 111 240503). 1) We make the signal and writing-reading light beams collinearly pass through the cold-atom cloud along the z direction to suppress the decoherence between the spin waves due to atomic motion. 2) We apply a moderate magnetic field (13.5 G) to the cold-atom ensemble to lift Zeeman degeneracy. So, the magnetic-field-sensitive transitions are removed from EIT system and the two optical orthogonal polarization modes are stored as two magnetic-field-insensitive spin waves. In contrast to our previous experiment, we finish the storage in the high optical-depth cold atomic ensemble. To obtain such a high optical-depth cold atomic ensemble, we expand the diameters of the trapping laser beams and use a pair of rectangular magnetic coils in a magnetic optical trap (MOT) to prepare a cigar-shaped cold atomic ensemble. The MOT magnetic field is further compressed, and then the optical-depth of the cold atomic ensemble increases up to ~11 in the present experiment, which allows us to achieve a storage efficiency of 30%, which exceeds the previous value (8%). At an MOT repetition rate of 10 Hz, the measured zero-delay storage efficiencies for the two orthogonal polarization modes are symmetric, which go up to ~30%. The 1/e-folding lifetimes of the two orthogonal polarization modes rise up to 3 ms. We also measure the dependence of the zero-delay retrieval efficiency on the MOT repetition rate F and find that the storage efficiency is still more than 20% when the repetition rate F is 50 Hz. The present results will allow one to achieve a long lifetime and highly-efficient quantum memory for photonic polarization qubit and then find applications in scaling-up linear-optical quantum computations and long-distance quantum communication.

Acta Physica Sinica•Jan 1, 2018•1 citation

Towards highly-efficient single-photon storage based on electromagnetically induced transparency

Pin-Ju Tsai, Ya-Fen Hsiao, Ying-Cheng Chen

Optical quantum memories are important components in the long-distance quantum communication based on quantum repeater protocol. To outperform the direct transmission of light with quantum repeaters, it is crucial to develop quantum memories with high fidelity, high efficiency and long storage time. Recently, we demonstrate that it is feasible to achieve a high storage efficiency of 92% for electromagnetically-induced-transparency (EIT)-based memory with weak coherent signal pulses in cold atomic ensembles [1]. To realize the highly-efficient memory with quantum light, we have built a bright and narrowband photon-pair source which can be locked to atomic transition based on the cavity-enhanced spontaneous parametric down conversion [2]. Here, we present our results on the storage of single photons generated by such a source in EIT-based memories. A storage efficiency of 36% is obtained in initial runs. Future improvements toward a high efficiency are discussed. Such a development paves the way for the applications of photon-pair-based quantum repeater and multi-photon synchronization.

Advances in Photonics of Quantum Computing, Memory, and Communication•Mar 4, 2019•0 citations
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159508): Storing a photon as a collective excitation in an atomic ensemble succeeds with a probability that rises with optical depth and falls with decoherence during the storage interval. Optical depth is therefore the first design number for an electromagnetically induced transparency memory. This study computes the quantities that follow from stated assumptions for a rubidium ensemble, control-field optimised at each optical depth, ground-state coherence times of 100 microseconds and 1 millisecond, using the relations set out in the Methods. The headline results are efficiency at d 20 = 0.9773, efficiency at d 100 = 0.9999, depth for 90pct = 8.819, eff d100 with 100us coherence = 0.8187, eff d100 with 1ms coherence = 0.9801. The central question is stated as follows: What optical depth gives ninety percent storage-and-retrieval efficiency in the standard model, and how does a finite ground-state coherence time change that requirement for a ten-microsecond storage? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory memories report efficiencies from a few percent to above eighty percent, with the highest values in high-optical-depth cold ensembles and cavities. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Storing a photon as a collective excitation in an atomic ensemble succeeds with a probability that rises with optical depth and falls with decoherence during the storage interval. Optical depth is therefore the first design number for an electromagnetically induced transparency memory. This study computes the quantities that follow from stated assumptions for a rubidium ensemble, control-field optimised at each optical depth, ground-state coherence times of 100 microseconds and 1 millisecond, using the relations set out in the Methods. The headline results are efficiency at d 20 = 0.9773, efficiency at d 100 = 0.9999, depth for 90pct = 8.819, eff d100 with 100us coherence = 0.8187, eff d100 with 1ms coherence = 0.9801. The central question is stated as follows: What optical depth gives ninety percent storage-and-retrieval efficiency in the standard model, and how does a finite ground-state coherence time change that requirement for a ten-microsecond storage? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory memories report efficiencies from a few percent to above eighty percent, with the highest values in high-optical-depth cold ensembles and cavities. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159685): An off-resonant Raman memory trades optical depth and control energy for bandwidth: it can accept short photons that a narrowband memory cannot, at the price of a noise floor set by spontaneous scattering from the control field. This study computes the quantities that follow from stated assumptions for a warm caesium vapour Raman memory, photon duration 1 ns, detuning 1 to 5 GHz, control energies spanning an order of magnitude, using the relations set out in the Methods. The headline results are efficiency E4 D2 = 0.8347, noise E4 D2 = 0.08, efficiency E10 D5 = 0.5132, noise E10 D5 = 5.120e-03, bandwidth E4 D2 GHz = 1.5. Further computed values are operating points meeting both = 1. The central question is stated as follows: For stated control pulse energies and detunings, what acceptance bandwidth, storage efficiency and noise photons per pulse follow, and is there an operating point with efficiency above one half and noise below one hundredth of a photon? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Raman memories have demonstrated gigahertz bandwidths with efficiencies of tens of percent and noise levels that remain the main obstacle to single-photon operation. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Quantum storage of flying optical qubits, namely coherently mapping photonic states into and out of an optically controlled memory on demand, constitutes an essential component in the optical quantum information processing science, with applications to long-distance optical communication [1]. In this context, practical protocols require sufficiently large storage efficiency to achieve a performance better than direct transmission. Theoretically, the storage and retrieval efficiency can only be improved with the increase of the optical depth (OD). Recent progresses have shown that high OD media enable to reach high-efficiency electromagnetically induced transparency (EIT)-based optical storage, albeit without the demonstration of qubit storage [2, 3]. Here we experimentally implement an optical quantum memory with single-photon-level probes, showing a EIT-based storage efficiency around 70%. Furthermore, thanks to the spatial multiplexing of the dense atomic ensemble, highly efficient storage of polarization qubit is performed.
Optical quantum memory plays an important role in scaling-up linear optical quantum computations and longdistance quantum communication. For effectively realizing such tasks, a long-lived and highly-efficient quantum memory is needed. The dynamic electromagnetically-induced-transparency (EIT) process can be used for completing an absorptive storage scheme in an atomic ensemble. In such a process, the quantum states of coming single photons can be coherently transformed into spin waves associated with coherences between atomic ground levels via switching off controlling light beam. For storing a single-mode optical signal, a pair of ground levels is involved. While for storing an optical polarization qubit, i.e., two orthogonal polarization modes, the coherence between two pairs of ground levels will be involved. Also, to obtain a high efficiency in the EIT optical storage, the optical-depth of the cold ensemble should be high. For prolonging the coherent time of the spin waves stored in atomic ensemble, decoherence between spin waves due to atomic motion and non-uniform Zeeman shift of ground levels should be effectively suppressed. Recently, a long-lived and highly-efficient optical quantum memory for single-mode storage in a high-optical-depth cold atom ensemble has been experimentally demonstrated via the gradient echo memory scheme (2016 Optical 3 100). While, for the optical polarization qubit storage, a long lifetime (in ms) and high-fidelity EIT storage experiment has been achieved by our group, but the storage efficiency in the experiment is very low (8%) due to lower optical depth of the cold ensemble (2013 Phys. Rev. Lett. 111 240503). The storage efficiency in long-lived storage of two orthogonal polarization modes still needs further improving. Here in this paper we demonstrate an experiment of long-lived and highly-efficient storage of two optical orthogonal polarization modes in a high optical-depth cold atomic ensemble via dynamic EIT process. For achieving a long lifetime in the storage experiment, we follow the two steps, which are used in our previous work (2013 Phys. Rev. Lett. 111 240503). 1) We make the signal and writing-reading light beams collinearly pass through the cold-atom cloud along the z direction to suppress the decoherence between the spin waves due to atomic motion. 2) We apply a moderate magnetic field (13.5 G) to the cold-atom ensemble to lift Zeeman degeneracy. So, the magnetic-field-sensitive transitions are removed from EIT system and the two optical orthogonal polarization modes are stored as two magnetic-field-insensitive spin waves. In contrast to our previous experiment, we finish the storage in the high optical-depth cold atomic ensemble. To obtain such a high optical-depth cold atomic ensemble, we expand the diameters of the trapping laser beams and use a pair of rectangular magnetic coils in a magnetic optical trap (MOT) to prepare a cigar-shaped cold atomic ensemble. The MOT magnetic field is further compressed, and then the optical-depth of the cold atomic ensemble increases up to ~11 in the present experiment, which allows us to achieve a storage efficiency of 30%, which exceeds the previous value (8%). At an MOT repetition rate of 10 Hz, the measured zero-delay storage efficiencies for the two orthogonal polarization modes are symmetric, which go up to ~30%. The 1/e-folding lifetimes of the two orthogonal polarization modes rise up to 3 ms. We also measure the dependence of the zero-delay retrieval efficiency on the MOT repetition rate F and find that the storage efficiency is still more than 20% when the repetition rate F is 50 Hz. The present results will allow one to achieve a long lifetime and highly-efficient quantum memory for photonic polarization qubit and then find applications in scaling-up linear-optical quantum computations and long-distance quantum communication.
Optical quantum memories are important components in the long-distance quantum communication based on quantum repeater protocol. To outperform the direct transmission of light with quantum repeaters, it is crucial to develop quantum memories with high fidelity, high efficiency and long storage time. Recently, we demonstrate that it is feasible to achieve a high storage efficiency of 92% for electromagnetically-induced-transparency (EIT)-based memory with weak coherent signal pulses in cold atomic ensembles [1]. To realize the highly-efficient memory with quantum light, we have built a bright and narrowband photon-pair source which can be locked to atomic transition based on the cavity-enhanced spontaneous parametric down conversion [2]. Here, we present our results on the storage of single photons generated by such a source in EIT-based memories. A storage efficiency of 36% is obtained in initial runs. Future improvements toward a high efficiency are discussed. Such a development paves the way for the applications of photon-pair-based quantum repeater and multi-photon synchronization.