Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Diósi–Penrose Gravitational Decoherence Times Across Mass Scales with a Density Ceiling

William Alexander Aldred

Published Nov 11, 2026• 0 citations
Publisher

Abstract

This paper evaluates Diósi–Penrose gravitational decoherence times from the electron to macroscopic masses and asks whether a maximum density alters the picture. The computed time is 5.665e+19 seconds for a proton displaced by its own scale, 1.097e+15 seconds for a fullerene molecule, and 1.580e+00 seconds for a dust grain of 1e-15 kilograms. The density ceiling of 9.717e+57 kilograms per cubic metre lies far above the densities of all systems tabulated, so it leaves the standard gravitational decoherence estimates unchanged. The strong mass dependence, not the ceiling, is what separates microscopic superpositions, which persist, from macroscopic ones, which localise promptly in this model. The study is simulated and computed from stated assumptions; it is not a measurement.

DOI
10.5281/zenodo.24145232

Related papers

Observer Systems and the Density Ceiling: A Computed Bound on Coherent Laboratory Mass

William Alexander Aldred

This paper computes the largest laboratory mass that can remain coherent for one second under gravitational decoherence estimates, as a concrete form of the observer problem in measurement theory. The mass at which the Diósi–Penrose time falls to one second, for ordinary condensed-matter density, is 1.000e-12 kilograms. A mass of 1e-12 kilograms already decoheres in 9.802e-06 seconds and a mass of 1e-09 kilograms in 9.802e-11 seconds in this estimate. The density ceiling itself is never approached at laboratory densities; the operative limitation on coherent observers and memories is gravitational decoherence scaling, not the ceiling. Wigner-friend scenarios with macroscopic coherent laboratories therefore face a quantified timescale obstacle in this model. The study is simulated and computed from stated assumptions; it is not a measurement.

•Nov 11, 2026•0 citations

Technical Note Yukawa-Enhanced Diosi--Penrose Timescale for MAQRO-Like Superpositions

Mustafa Boudjerada

This note evaluates Diósi–Penrose gravitational self-energy decoherence for a MAQRO-like spatial superposition using a rigid homogeneous-sphere mass model. For (M=10^{10},\mathrm{amu}) and (s=100,\mathrm{nm}), the Newtonian DP timescale lies in the range (\sim 9)–(100) minutes across representative densities. A Yukawa correction (V(r)=-(Gm_1m_2/r),[1+\alpha e^{-r/\lambda}]) is incorporated by modifying the DP kernel; for (\lambda \gg {R,s}), the timescale is reduced approximately by a factor (1+\alpha). For the benchmark ((\alpha,\lambda)=(612.5,20.4,\mu\mathrm{m})), the predicted timescale is (\sim 0.9)–(9.7) seconds.

•Jan 9, 2026•0 citations

Technical Note Yukawa-Enhanced Diosi--Penrose Timescale for MAQRO-Like Superpositions

Mustafa Boudjerada

This note evaluates Diósi–Penrose gravitational self-energy decoherence for a MAQRO-like superposition using a rigid homogeneous-sphere mass model. For (M=10^{10},\mathrm{amu}) and (s=100,\mathrm{nm}), the Newtonian DP timescale spans (\sim 9)–(100) minutes across representative densities. A Yukawa correction (V(r)=-(Gm_1m_2/r)[1+\alpha e^{-r/\lambda}]) is included by modifying the DP kernel; for (\lambda \gg {R,s}), the timescale reduces approximately by (1+\alpha). For the benchmark ((\alpha,\lambda)=(612.5,20.4,\mu\mathrm{m})), the predicted timescale is (\sim 0.9)–(9.7) seconds.

•Jan 8, 2026•0 citations

Technical Note Yukawa-Enhanced Diosi--Penrose Timescale for MAQRO-Like Superpositions

Mustafa Boudjerada

This note evaluates Diósi–Penrose gravitational self-energy decoherence for a MAQRO-like superposition using a rigid homogeneous-sphere mass model. For (M=10^{10},\mathrm{amu}) and (s=100,\mathrm{nm}), the Newtonian DP timescale spans (\sim 9)–(100) minutes across representative densities. A Yukawa correction (V(r)=-(Gm_1m_2/r)[1+\alpha e^{-r/\lambda}]) is included by modifying the DP kernel; for (\lambda \gg {R,s}), the timescale reduces approximately by (1+\alpha). For the benchmark ((\alpha,\lambda)=(612.5,20.4,\mu\mathrm{m})), the predicted timescale is (\sim 0.9)–(9.7) seconds.

•Jan 8, 2026•0 citations

Material-Dependent Gravitational Decoherence: Thermodynamic Evaluation of the Pikovski Time-Dilation Mechanism

Nikolaj Weber

We evaluate the macroscopic entanglement-loss implications of gravitational time dilation, first identified by Pikovski et al. (2015). By moving beyond the idealized zero-temperature single-mode approximation to a continuous Debye model in the canonical ensemble, we derive the explicit phononic heat-capacity limits for spontaneous gravitational decoherence. We find that the decoherence rate driven by internal time-dilation variance strongly scales with $\sigma \propto T^{5/2}$ at ultra-low experimental temperatures ($T \ll \Theta_D$), vanishing strictly at absolute zero. Furthermore, we demonstrate mathematically that translational invariance renders proper-time differences between spatially distinct branches of an identical matter distribution identically zero. Thus, contrary to the Diósi-Penrose approach, an isolated mass in a pure superposition cannot undergo solely self-gravitational state-collapse. Decoherence requires either an external gravitational potential gradient or internal structural asymmetry. Lastly, we prove that the topological spectral dimension $d_s$ of the macroscopic test mass determines the decoherence rate scaling, creating a new class of ultra-sensitive 'fracton-gravity sensors'.

•Mar 9, 2026•0 citations

Continuous Spontaneous Localisation Rates Implied by a Maximum Density: A Computed Bound and Laboratory Comparison

William Alexander Aldred

This paper computes what a maximum mass density implies for the collapse rate in continuous spontaneous localisation models and compares the outcome with laboratory limits. The density ceiling adopted here is 9.717e+57 kilograms per cubic metre on the neutron branch. Translating the ceiling into an energy budget over a Hubble time gives a formal upper value for the collapse rate of 6.753e+57 per second, many orders of magnitude above both the conventional value of 1.00e-16 per second and the stronger value of 1.00e-08 per second sometimes advocated on phenomenological grounds. The associated heating at the conventional rate is only 2.973e-17 watts per kilogram. The ceiling therefore does not restrict the collapse rate within any range currently discussed; the binding restrictions remain the laboratory limits from spontaneous radiation and force-noise measurements, which are tighter by an enormous margin. The study is simulated and computed from stated assumptions; it is not a measurement.

•Nov 11, 2026•0 citations
This paper evaluates Diósi–Penrose gravitational decoherence times from the electron to macroscopic masses and asks whether a maximum density alters the picture. The computed time is 5.665e+19 seconds for a proton displaced by its own scale, 1.097e+15 seconds for a fullerene molecule, and 1.580e+00 seconds for a dust grain of 1e-15 kilograms. The density ceiling of 9.717e+57 kilograms per cubic metre lies far above the densities of all systems tabulated, so it leaves the standard gravitational decoherence estimates unchanged. The strong mass dependence, not the ceiling, is what separates microscopic superpositions, which persist, from macroscopic ones, which localise promptly in this model. The study is simulated and computed from stated assumptions; it is not a measurement.
This paper computes the largest laboratory mass that can remain coherent for one second under gravitational decoherence estimates, as a concrete form of the observer problem in measurement theory. The mass at which the Diósi–Penrose time falls to one second, for ordinary condensed-matter density, is 1.000e-12 kilograms. A mass of 1e-12 kilograms already decoheres in 9.802e-06 seconds and a mass of 1e-09 kilograms in 9.802e-11 seconds in this estimate. The density ceiling itself is never approached at laboratory densities; the operative limitation on coherent observers and memories is gravitational decoherence scaling, not the ceiling. Wigner-friend scenarios with macroscopic coherent laboratories therefore face a quantified timescale obstacle in this model. The study is simulated and computed from stated assumptions; it is not a measurement.
This note evaluates Diósi–Penrose gravitational self-energy decoherence for a MAQRO-like spatial superposition using a rigid homogeneous-sphere mass model. For (M=10^{10},\mathrm{amu}) and (s=100,\mathrm{nm}), the Newtonian DP timescale lies in the range (\sim 9)–(100) minutes across representative densities. A Yukawa correction (V(r)=-(Gm_1m_2/r),[1+\alpha e^{-r/\lambda}]) is incorporated by modifying the DP kernel; for (\lambda \gg {R,s}), the timescale is reduced approximately by a factor (1+\alpha). For the benchmark ((\alpha,\lambda)=(612.5,20.4,\mu\mathrm{m})), the predicted timescale is (\sim 0.9)–(9.7) seconds.
This note evaluates Diósi–Penrose gravitational self-energy decoherence for a MAQRO-like superposition using a rigid homogeneous-sphere mass model. For (M=10^{10},\mathrm{amu}) and (s=100,\mathrm{nm}), the Newtonian DP timescale spans (\sim 9)–(100) minutes across representative densities. A Yukawa correction (V(r)=-(Gm_1m_2/r)[1+\alpha e^{-r/\lambda}]) is included by modifying the DP kernel; for (\lambda \gg {R,s}), the timescale reduces approximately by (1+\alpha). For the benchmark ((\alpha,\lambda)=(612.5,20.4,\mu\mathrm{m})), the predicted timescale is (\sim 0.9)–(9.7) seconds.
This note evaluates Diósi–Penrose gravitational self-energy decoherence for a MAQRO-like superposition using a rigid homogeneous-sphere mass model. For (M=10^{10},\mathrm{amu}) and (s=100,\mathrm{nm}), the Newtonian DP timescale spans (\sim 9)–(100) minutes across representative densities. A Yukawa correction (V(r)=-(Gm_1m_2/r)[1+\alpha e^{-r/\lambda}]) is included by modifying the DP kernel; for (\lambda \gg {R,s}), the timescale reduces approximately by (1+\alpha). For the benchmark ((\alpha,\lambda)=(612.5,20.4,\mu\mathrm{m})), the predicted timescale is (\sim 0.9)–(9.7) seconds.
We evaluate the macroscopic entanglement-loss implications of gravitational time dilation, first identified by Pikovski et al. (2015). By moving beyond the idealized zero-temperature single-mode approximation to a continuous Debye model in the canonical ensemble, we derive the explicit phononic heat-capacity limits for spontaneous gravitational decoherence. We find that the decoherence rate driven by internal time-dilation variance strongly scales with σ∝T5/2\sigma \propto T^{5/2}σ∝T5/2 at ultra-low experimental temperatures (T≪ΘDT \ll \Theta_DT≪ΘD​), vanishing strictly at absolute zero. Furthermore, we demonstrate mathematically that translational invariance renders proper-time differences between spatially distinct branches of an identical matter distribution identically zero. Thus, contrary to the Diósi-Penrose approach, an isolated mass in a pure superposition cannot undergo solely self-gravitational state-collapse. Decoherence requires either an external gravitational potential gradient or internal structural asymmetry. Lastly, we prove that the topological spectral dimension dsd_sds​ of the macroscopic test mass determines the decoherence rate scaling, creating a new class of ultra-sensitive 'fracton-gravity sensors'.
This paper computes what a maximum mass density implies for the collapse rate in continuous spontaneous localisation models and compares the outcome with laboratory limits. The density ceiling adopted here is 9.717e+57 kilograms per cubic metre on the neutron branch. Translating the ceiling into an energy budget over a Hubble time gives a formal upper value for the collapse rate of 6.753e+57 per second, many orders of magnitude above both the conventional value of 1.00e-16 per second and the stronger value of 1.00e-08 per second sometimes advocated on phenomenological grounds. The associated heating at the conventional rate is only 2.973e-17 watts per kilogram. The ceiling therefore does not restrict the collapse rate within any range currently discussed; the binding restrictions remain the laboratory limits from spontaneous radiation and force-noise measurements, which are tighter by an enormous margin. The study is simulated and computed from stated assumptions; it is not a measurement.