Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Critical Crossings and Quantum Friction in a Finite-Time $XY$-Chain Otto Engine

Geronimo Allan Jerome Acosta, Cristine Dlr. Villagonzalo

Published Nov 11, 2026• 0 citations
Publisher

Abstract

Abstract We investigate the finite-time performance of a quantum Otto engine with a transverse-field anisotropic $XY$ spin chain as its working medium. By decomposing the chain into independent momentum sectors, we calculate mode-resolved transition probabilities during linear transverse-field ramps. We determine the resulting excitation density, work, heat, efficiency, and power for driving protocols in which the transverse field is varied linearly between prescribed endpoints during the two unitary strokes, while the anisotropy remains fixed. Protocols crossing one or both quantum critical points exhibit Kibble--Zurek scaling, $n_{\mathrm{ex}}\sim\tau^{-1/2}$, whereas protocols that maintain a nonzero energy gap throughout the ramps exhibit the faster decay $n_{\mathrm{ex}}\sim\tau^{-2}$, where $\tau$ is the duration of each ramp. The work separates into an endpoint-dependent adiabatic contribution and a nonnegative contribution associated with quantum friction. At short driving times, quantum friction can exceed the adiabatic work output and prevent heat-engine operation. At long driving times, the thermodynamic quantities approach adiabatic values determined by the endpoint spectra and thermal population imbalances. Increasing anisotropy suppresses excitations and hastens the approach to the adiabatic limit. These results distinguish endpoint thermodynamics from critical-crossing dynamics and clarify their roles in finite-time engine performance.

DOI
10.21203/rs.3.rs-11275667/v1

Related papers

From maximum work to maximum power in an optimally controlled quantum Ising Otto engine

Vincenzo Roberto Arezzo, Davide Rossini, Giuseppe E. Santoro +1 more

In finite-time quantum Otto engines, maximizing power requires balancing the duration of the unitary strokes against the losses from nonadiabatic excitations. We address this trade-off in an Otto engine with a free-fermion working medium, using quantum optimal control. Having determined the single-particle energy scales that maximize ideal work at fixed reservoir temperatures, we realize them as the two endpoint Hamiltonians of a transverse-field Ising chain, connected by a path that crosses the quantum critical point. Optimal control of the unitary strokes yields near-ideal work on a time scale growing linearly with system size, instead of quadratically as for linear driving. We derive a time-rescaling relation that maps protocols with different energy scales onto a single reference problem and, for complete thermalization strokes of fixed duration, use it to build an analytical model of the cycle power. The model predicts two competing maximum-power regimes: a slow branch that approaches the ideal work, and a fast, size-independent branch that trades work for a shorter cycle and dominates above a crossover size, in quantitative agreement with numerical optimal-control results. It also identifies power-optimal energy scales that differ from the work-optimal ones and further increase the power. Our results provide a predictive approach to jointly optimizing the operating conditions and finite-time dynamics of quantum heat engines.

arXiv:2611.08025•Nov 5, 2026•0 citations

Universal finite-time thermodynamics of many-body quantum machines from Kibble-Zurek scaling

B S Revathy, Victor Mukherjee, Uma Divakaran +1 more

We demonstrate the existence of universal features in the finite-time thermodynamics of quantum machines by considering a many-body quantum Otto cycle in which the working medium is driven across quantum critical points during the unitary strokes.Specifically, we consider a quantum engine powered by dissipative energizing and relaxing baths.We show that under very generic conditions, the output work is governed by the Kibble-Zurek mechanism; i.e., it exhibits a universal power-law scaling with the driving speed through the critical points.We also optimize the finite-time thermodynamics as a function of the driving speed.The maximum power and the corresponding efficiency take a universal form, and are reached for an optimal speed that is governed by the critical exponents.We exemplify our results by considering a transverse-field Ising spin chain as the working medium.For this model, we also show how the efficiency and power vary as the engine becomes critical.

arXiv:2003.06607•Physical Review Research•Nov 18, 2020•55 citations

Work processes in one-dimensional quantum Ising models

Vishnu Muraleedharan Sajitha

Although the idea of combining thermodynamics with quantum mechanics is more than a century old, quantum thermodynamics has seen significant development over the past few decades. Understanding work, heat, and entropy in the quantum regime has become increasingly important, particularly in light of advances in quantum technologies. This thesis investigates work processes in quantum spin chains. Quantum work processes can involve genuinely quantum features such as entanglement, coherence, and measurement back-action, which are absent in classical thermodynamic descriptions, making their characterization an area of ongoing interest in quantum thermodynamics. Focusing first on a single work step, we show that the frictional work due to finite-time driving for a non-integrable quantum spin chain can be well quantified by the diagonal entropy production. We further demonstrate that integrability breaking enhances work extraction in the adiabatic limit, while suppressing it in the non-adiabatic regime. We then study a quantum Otto cycle using the transverse-field Ising model as the working substance. We determine how different types of operation (engine, refrigerator, accelerator, heater) can emerge for different parameter regimes. We show that with infinitesimal work strokes, a thermal machine behaves either as an engine or an accelerator, and that these regimes can be characterized by equilibrium transverse magnetization. At low temperatures, these regimes are governed by low-energy excitations, while at high temperatures they follow from a free-energy expansion in inverse temperature. Frictional effects can emerge and suppress the engine performance during non-adiabatic driving. We show that these effects can be mitigated using an optimised drive protocol based on a geometric formulation of the path of the system through parameter space. Overall, this thesis provides a comprehensive understanding of how integrability, coherence, finite-time driving, and non-adiabatic transitions govern work extraction and thermal machine operation in quantum spin chains, and paves the way for understanding these processes in other quantum many-body systems.

•Aug 8, 2026•0 citations

Quantum Otto engine powered by an anisotropic Heisenberg XYZ model under independent local magnetic fields

Meiru Li, Maimaitiyiming Tusun, Fang Zhao +2 more

We study a quantum Otto heat engine whose working substance is an anisotropic two-qubit Heisenberg XYZ model. Independent local magnetic fields are used to control each spin individually. The influence of the longitudinal coupling, anisotropy, transverse coupling, and local fields on the net work output and efficiency is systematically examined. Reducing the longitudinal coupling is found to markedly improve both the maximum work and the peak efficiency. The engine performance reaches an optimum at a particular value of the anisotropy parameter. A local work analysis clarifies how work is produced during the cycle. Because of the asymmetric local fields and the intrinsic spin-spin interaction, the two qubits play markedly different thermodynamic roles; the interaction term itself contributes crucially to the total work. We further analyze the variation of quantum entanglement, quantified by concurrence, along the cycle. The results indicate that a pronounced change in entanglement between the hot and cold isomagnetic strokes is closely correlated with the efficiency enhancement. This work offers new insight into the operating principles and control of quantum Otto heat engines.

quant-pharXiv:2606.12877•Quantum Information Processing•Jun 12, 2026•0 citations

Measurement-based quantum Otto engine with a two-spin system coupled by anisotropic interaction: Enhanced efficiency at finite times

Chayan Purkait, Asoka Biswas

We have studied the performance of a measurement-based quantum Otto engine (QOE) in a working system of two spins coupled by Heisenberg anisotropic interaction. A nonselective quantum measurement fuels the engine. We have calculated thermodynamic quantities of the cycle in terms of the transition probabilities between the instantaneous energy eigenstates, and also between the instantaneous energy eigenstates and the basis states of the measurement, when the unitary stages of the cycle operate for a finite time τ. The efficiency attains a large value in the limit of τ→0 and then gradually reaches the adiabatic value in a long-time limit τ→∞. For finite values of τ and for anisotropic interaction, an oscillatory behavior of the efficiency of the engine is observed. This oscillation can be interpreted in terms of interference between the relevant transition amplitudes in the unitary stages of the engine cycle. Therefore, for a suitable choice of timing of the unitary processes in the short time regime, the engine can have a higher work output and less heat absorption, such that it works more efficiently than a quasistatic engine. In the case of an always-on heat bath, in a very short time, the bath has a negligible effect on its performance.

arXiv:2304.05877•Physical review. E•May 8, 2023•18 citations

Anisotropy-assisted thermodynamic advantage of a local-spin quantum thermal machine

Chayan Purkait, Suman Chand, Asoka Biswas

We study quantum Otto thermal machines with a two-spin working system coupled by anisotropic interaction. Depending on the choice of different parameters, the quantum Otto cycle can function as different thermal machines, including a heat engine, refrigerator, accelerator, and heater. We aim to investigate how the anisotropy plays a fundamental role in the performance of the quantum Otto engine (QOE) operating in different timescales. We find that while the engine's efficiency increases with the increase in anisotropy for the quasistatic operation, quantum internal friction and incomplete thermalization degrade the performance in a finite-time cycle. Further, we study the quantum heat engine (QHE) with one of the spins (local spin) as the working system. We show that the efficiency of such an engine can surpass the standard quantum Otto limit, along with maximum power, thanks to the anisotropy. This can be attributed to quantum interference effects. We demonstrate that the enhanced performance of a local-spin QHE originates from the same interference effects, as in a measurement-based QOE for their finite-time operation.

arXiv:2309.04757•Physical review. E•Apr 10, 2024•8 citations
Critical Crossings and Quantum Friction in a Finite-Time XYXYXY-Chain Otto Engine
Abstract We investigate the finite-time performance of a quantum Otto engine with a transverse-field anisotropic XYXYXY spin chain as its working medium. By decomposing the chain into independent momentum sectors, we calculate mode-resolved transition probabilities during linear transverse-field ramps. We determine the resulting excitation density, work, heat, efficiency, and power for driving protocols in which the transverse field is varied linearly between prescribed endpoints during the two unitary strokes, while the anisotropy remains fixed. Protocols crossing one or both quantum critical points exhibit Kibble--Zurek scaling, nex∼τ−1/2n_{\mathrm{ex}}\sim\tau^{-1/2}nex​∼τ−1/2, whereas protocols that maintain a nonzero energy gap throughout the ramps exhibit the faster decay nex∼τ−2n_{\mathrm{ex}}\sim\tau^{-2}nex​∼τ−2, where τ\tauτ is the duration of each ramp. The work separates into an endpoint-dependent adiabatic contribution and a nonnegative contribution associated with quantum friction. At short driving times, quantum friction can exceed the adiabatic work output and prevent heat-engine operation. At long driving times, the thermodynamic quantities approach adiabatic values determined by the endpoint spectra and thermal population imbalances. Increasing anisotropy suppresses excitations and hastens the approach to the adiabatic limit. These results distinguish endpoint thermodynamics from critical-crossing dynamics and clarify their roles in finite-time engine performance.
In finite-time quantum Otto engines, maximizing power requires balancing the duration of the unitary strokes against the losses from nonadiabatic excitations. We address this trade-off in an Otto engine with a free-fermion working medium, using quantum optimal control. Having determined the single-particle energy scales that maximize ideal work at fixed reservoir temperatures, we realize them as the two endpoint Hamiltonians of a transverse-field Ising chain, connected by a path that crosses the quantum critical point. Optimal control of the unitary strokes yields near-ideal work on a time scale growing linearly with system size, instead of quadratically as for linear driving. We derive a time-rescaling relation that maps protocols with different energy scales onto a single reference problem and, for complete thermalization strokes of fixed duration, use it to build an analytical model of the cycle power. The model predicts two competing maximum-power regimes: a slow branch that approaches the ideal work, and a fast, size-independent branch that trades work for a shorter cycle and dominates above a crossover size, in quantitative agreement with numerical optimal-control results. It also identifies power-optimal energy scales that differ from the work-optimal ones and further increase the power. Our results provide a predictive approach to jointly optimizing the operating conditions and finite-time dynamics of quantum heat engines.
We demonstrate the existence of universal features in the finite-time thermodynamics of quantum machines by considering a many-body quantum Otto cycle in which the working medium is driven across quantum critical points during the unitary strokes.Specifically, we consider a quantum engine powered by dissipative energizing and relaxing baths.We show that under very generic conditions, the output work is governed by the Kibble-Zurek mechanism; i.e., it exhibits a universal power-law scaling with the driving speed through the critical points.We also optimize the finite-time thermodynamics as a function of the driving speed.The maximum power and the corresponding efficiency take a universal form, and are reached for an optimal speed that is governed by the critical exponents.We exemplify our results by considering a transverse-field Ising spin chain as the working medium.For this model, we also show how the efficiency and power vary as the engine becomes critical.
Although the idea of combining thermodynamics with quantum mechanics is more than a century old, quantum thermodynamics has seen significant development over the past few decades. Understanding work, heat, and entropy in the quantum regime has become increasingly important, particularly in light of advances in quantum technologies. This thesis investigates work processes in quantum spin chains. Quantum work processes can involve genuinely quantum features such as entanglement, coherence, and measurement back-action, which are absent in classical thermodynamic descriptions, making their characterization an area of ongoing interest in quantum thermodynamics. Focusing first on a single work step, we show that the frictional work due to finite-time driving for a non-integrable quantum spin chain can be well quantified by the diagonal entropy production. We further demonstrate that integrability breaking enhances work extraction in the adiabatic limit, while suppressing it in the non-adiabatic regime. We then study a quantum Otto cycle using the transverse-field Ising model as the working substance. We determine how different types of operation (engine, refrigerator, accelerator, heater) can emerge for different parameter regimes. We show that with infinitesimal work strokes, a thermal machine behaves either as an engine or an accelerator, and that these regimes can be characterized by equilibrium transverse magnetization. At low temperatures, these regimes are governed by low-energy excitations, while at high temperatures they follow from a free-energy expansion in inverse temperature. Frictional effects can emerge and suppress the engine performance during non-adiabatic driving. We show that these effects can be mitigated using an optimised drive protocol based on a geometric formulation of the path of the system through parameter space. Overall, this thesis provides a comprehensive understanding of how integrability, coherence, finite-time driving, and non-adiabatic transitions govern work extraction and thermal machine operation in quantum spin chains, and paves the way for understanding these processes in other quantum many-body systems.
We study a quantum Otto heat engine whose working substance is an anisotropic two-qubit Heisenberg XYZ model. Independent local magnetic fields are used to control each spin individually. The influence of the longitudinal coupling, anisotropy, transverse coupling, and local fields on the net work output and efficiency is systematically examined. Reducing the longitudinal coupling is found to markedly improve both the maximum work and the peak efficiency. The engine performance reaches an optimum at a particular value of the anisotropy parameter. A local work analysis clarifies how work is produced during the cycle. Because of the asymmetric local fields and the intrinsic spin-spin interaction, the two qubits play markedly different thermodynamic roles; the interaction term itself contributes crucially to the total work. We further analyze the variation of quantum entanglement, quantified by concurrence, along the cycle. The results indicate that a pronounced change in entanglement between the hot and cold isomagnetic strokes is closely correlated with the efficiency enhancement. This work offers new insight into the operating principles and control of quantum Otto heat engines.
We have studied the performance of a measurement-based quantum Otto engine (QOE) in a working system of two spins coupled by Heisenberg anisotropic interaction. A nonselective quantum measurement fuels the engine. We have calculated thermodynamic quantities of the cycle in terms of the transition probabilities between the instantaneous energy eigenstates, and also between the instantaneous energy eigenstates and the basis states of the measurement, when the unitary stages of the cycle operate for a finite time τ. The efficiency attains a large value in the limit of τ→0 and then gradually reaches the adiabatic value in a long-time limit τ→∞. For finite values of τ and for anisotropic interaction, an oscillatory behavior of the efficiency of the engine is observed. This oscillation can be interpreted in terms of interference between the relevant transition amplitudes in the unitary stages of the engine cycle. Therefore, for a suitable choice of timing of the unitary processes in the short time regime, the engine can have a higher work output and less heat absorption, such that it works more efficiently than a quasistatic engine. In the case of an always-on heat bath, in a very short time, the bath has a negligible effect on its performance.
We study quantum Otto thermal machines with a two-spin working system coupled by anisotropic interaction. Depending on the choice of different parameters, the quantum Otto cycle can function as different thermal machines, including a heat engine, refrigerator, accelerator, and heater. We aim to investigate how the anisotropy plays a fundamental role in the performance of the quantum Otto engine (QOE) operating in different timescales. We find that while the engine's efficiency increases with the increase in anisotropy for the quasistatic operation, quantum internal friction and incomplete thermalization degrade the performance in a finite-time cycle. Further, we study the quantum heat engine (QHE) with one of the spins (local spin) as the working system. We show that the efficiency of such an engine can surpass the standard quantum Otto limit, along with maximum power, thanks to the anisotropy. This can be attributed to quantum interference effects. We demonstrate that the enhanced performance of a local-spin QHE originates from the same interference effects, as in a measurement-based QOE for their finite-time operation.