One major challenge that arises from quantum computing is to implement fast, high-accuracy quantum state readout. For superconducting circuits, this problem reduces to a time series classification problem on readout signals. We propose that using path signature methods to extract features can enhance existing techniques for quantum state discrimination. We demonstrate the superior performance of our proposed approach over conventional methods in distinguishing three different quantum states on real experimental data from a superconducting transmon qubit.
One major challenge that arises from quantum computing is to implement fast, high-accuracy quantum state readout. For superconducting circuits, this problem reduces to a time series classification problem on readout signals. We propose that using path signature methods to extract features can enhance existing techniques for quantum state discrimination. We demonstrate the superior performance of our proposed approach over conventional methods in distinguishing three different quantum states on real experimental data from a superconducting transmon qubit.
Abstract Measurement errors in quantum computers are very detrimental to quantum computations. The ability to efficiently and accurately readout quantum states is crucial for quantum error correction schemes and quantum algorithms. Readout fidelity is typically limited by a poor signal-to-noise (SNR) ratio between the quantum states we intend to classify, as well as energy relaxation (e.g., T1 decay) from an excited state to a lower state during readout. Superconducting quantum bits (qubit), one of the leading candidates for scalable quantum computing hardware, are particularly limited by energy relaxation due to their relatively short coherence times. While most approaches for classifying the results of readout on superconducting qubits typically utilize clustering algorithms (e.g., a Gaussian mixture model) on integrated readout signals, these cannot distinguish between a quantum bit that was in the ground state prior to measurement from a qubit that decays to the ground state during measurement. For this reason, we instead propose using machine learning (ML) on the raw (non-integrated) analog signal and classification models on the full time series data (i.e., the \emph{trajectory}). We observe that time series classification methods, such as our chosen long short-term memory (LSTM) model, in combination with filtering and feature engineering techniques, consistently outperform clustering models. In particular, we find that the largest improvements come from reclassifying points in the boundary regions between neighboring clusters. These boundary points correspond to measurement records that deviate from the typical cluster, likely due to transient or noisy features in the signal that are not captured when the data is integrated. By retaining temporal information, sequence-aware models such as LSTMs can better discriminate these trajectories, whereas clustering methods based on integrated values are more prone to misclassifications.
Accurate quantum state readout is crucial for error correction and algorithms, but measurement errors are detrimental. Readout fidelity is typically limited by a poor signal-to-noise ratio (SNR) and energy relaxation (T1 decay), a significant problem for superconducting qubits. While most approaches classify results using clustering algorithms on integrated readout signals, these methods cannot distinguish a qubit that was initially in the ground state from one that decayed to it during measurement. We instead propose using machine learning (ML) on the raw, non-integrated analog signal. We apply time-series classification models, such as a long short-term memory (LSTM) network, to the full data trajectory. We find that our LSTM model, combined with filtering and feature engineering, consistently outperforms clustering. The largest improvements come from reclassifying points in the boundary regions between clusters. These points correspond to atypical measurement records, likely due to transient or noisy features lost during data integration. By retaining temporal information, sequence-aware models like LSTMs can better discriminate these trajectories, whereas clustering methods based on integrated values are more prone to misclassification.
In addition to the need for stable and precisely controllable qubits, quantum computers take advantage of good readout schemes. Superconducting qubit states can be inferred from the readout signal transmitted through a dispersively coupled resonator. This work proposes a readout classification method for superconducting qubits based on a neural network pretrained with an autoencoder approach. A neural network is pretrained with qubit readout signals as autoencoders in order to extract relevant features from the data set. Afterward, the pretrained-network inner-layer values are used to perform a classification of the inputs in a supervised manner. We demonstrate that this method can enhance classification performance, particularly for short- and long-time measurements where more traditional methods present inferior performance.
Quantum processors require rapid and high-fidelity simultaneous measurements of many qubits. While superconducting qubits are among the leading modalities toward a useful quantum processor, their readout remains a bottleneck. Traditional approaches to processing measurement data often struggle to account for crosstalk present in frequency-multiplexed readout, the preferred method to reduce the resource overhead. Recent approaches to address this challenge use neural networks to improve the state-discrimination fidelity. However, they are computationally expensive to train and evaluate, resulting in increased latency and poor scalability as the number of qubits increases. We present an alternative machine learning approach based on next-generation reservoir computing that constructs polynomial features from the measurement signals and maps them to the corresponding qubit states. This method is highly parallelizable, avoids the costly nonlinear activation functions common in neural networks, and supports real-time training, enabling fast evaluation, adaptability, and scalability. Despite its lower computational complexity, our reservoir approach is able to maintain high qubit-state-discrimination fidelity. Relative to traditional methods, our approach achieves error reductions of up to 50% and 11% on single- and five-qubit datasets, respectively, and delivers up to 2.5x crosstalk reduction on the five-qubit dataset. Compared with recent machine-learning methods, evaluating our model requires 100x fewer multiplications for single-qubit and 2.5x fewer for five-qubit models. This work demonstrates that reservoir computing can enhance qubit-state discrimination while maintaining scalability for future quantum processors.
Quantum non-demolition measurement plays an essential role in quantum technology, crucial for quantum error correction, metrology, and sensing. Conventionally, the qubit state is classified from the raw or integrated time-domain measurement record. Here, we demonstrate a method to enhance the assignment fidelity of the readout by considering the "path signature" of this measurement record, where the path signature is a mathematical tool for analyzing stochastic time series. We evaluate this approach across five different hardware setups, including those with and without readout multiplexing and parametric amplifiers, and demonstrate a significant improvement in assignment fidelity across all setups. Moreover, we show that the path signature of the measurement record provides an expressive feature set that can be used to detect and classify state transitions that occurred during the measurement, improving the prediction of the qubit state at the end of the measurement. This method has the potential to become a foundational tool for quantum technology.
Open quantum systems can undergo dissipative phase transitions, and their critical behavior can be exploited in sensing applications. For example, it can be used to enhance the fidelity of superconducting qubit readout measurements, a central problem toward the creation of reliable quantum hardware. A recently introduced measurement protocol, named ``critical parametric quantum sensing'', uses the parametric (two-photon driven) Kerr resonator's driven-dissipative phase transition to reach single-qubit detection fidelity of 99.9\% [arXiv:2107.04503]. In this work, we improve upon the previous protocol by using machine learning-based classification algorithms to \textit{efficiently and rapidly} extract information from this critical dynamics, which has so far been neglected to focus only on stationary properties. These classification algorithms are applied to the time series data of weak quantum measurements (homodyne detection) of a circuit-QED implementation of the Kerr resonator coupled to a superconducting qubit. This demonstrates how machine learning methods enable a faster and more reliable measurement protocol in critical open quantum systems.