Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Asia-Pacific Conference on Antennas and Propagation

Angle-Dependent Electric-Field Distributions in a Rydberg Atomic Antenna Array for AoA Sensing

Yan-Qi Yin, Xu Li, Yuan-Gao Yan, Zheng Shao-Yong, Yi-Ming Zhang

Published Aug 1, 2026• 0 citations
Publisher

Abstract

This paper presents a full-wave electromagnetic study of a three-cell Rydberg atomic antenna array for angle-of-arrival (AoA) sensing, with emphasis on the angle-dependent field distributions inside the vapor cells. The analysis focuses on the electric-field magnitude sampled along the optical path of each cell under 2.75 GHz signal-only plane-wave incidence. The results show that, for the present design, the signal field inside the vapor cells exhibits clear angular dependence. For the single-cell case, the field distribution changes most significantly from 90° to 140°, while the responses gradually become similar from 150° to 180°. For the three-cell array, all cells show the strongest angle sensitivity in the range of 90° to 130°, whereas 160° to 180° forms a weak-response region. Additional comparison based on separate illumination of the second and third vapor cells shows that their field distributions remain nearly unchanged from those in the full array, indicating that the blockage effect is weak under the current layout. These results show that the proposed array preserves distinguishable angle-dependent electric-field distributions across different vapor cells, thereby supporting subsequent AoA experiments based on LO-assisted atomic mixing and IF-phase comparison and providing useful guidance for the layout optimization of multi-cell Rydberg atomic arrays.

DOI
10.1109/apcap70872.2026.11740355

Related papers

Rydberg-atom microwave angle-of-arrival detection via cylindrical vapor-cell-mediated field redistribution

Peicheng Liu, Xingchen Hu, Yong Gao +3 more

Microwave angle-of-arrival(AoA) measurement is essential for radar, communication, and spectrum mon-itoring. Existing Rydberg-atom-based AoA schemes employ phase-difference measurements with local oscil-lators, standing-wave fluorescence imaging, or amplitude-ratio readout with internal metal reflectors. Here we demonstrate a new approach: a cylindrical glass vapor cell serving directly as an angle-encoding dielectric structure, eliminating the need for multiple apertures, local oscillators, or imaging optics. The cylindrical geometry produces angle-dependent reflection and field redistribution, mapping the incident AoA onto the effective microwave field sampled by the Rydberg ensemble. This effective field is read out optically via the Autler-Townes(A-T) splitting in the electromagnetically induced transparency(EIT) spectrum. Full-wave simulations and experiments at 11.64 GHz confirm a deterministic, geometry-mediated response over 0°-90°.Over the monotonic operating range(55°-125°), the angular resolution(minimum distinguishable increment)is 0.05°, and the angular accuracy(RMSE of repeated measurements) is 0.13° across the full range, improving to 0.05° in the optimal region(65°-115°). Occupying a sensing volume of~2.5 cm3, this method offers a compact, single-sensor pathway toward Rydberg AoA receivers.

arXiv:2609.02044•Sep 2, 2026•0 citations

Rydberg-Atom-Based Angle-of-Arrival Estimation Method for Ku-Band Microwave Signals

Xingchen Hu, Hao Wu, Yong Gao +3 more

The determination of the angle of arrival (AoA) of Ku-band microwave signals is of great significance in satellite communications, spectrum monitoring, and national defense security, which has created an urgent demand for high-precision and interference-resistant passive detection techniques. In this study, we propose a Rydberg-atom-based passive measurement method for estimating the AoA of Ku-band incident signals. Based on well-established quantum optical techniques, the proposed method converts the EIT-AT splitting intervals induced by waves or signals incident from different directions in Rydberg atoms within a single vapor cell into the electric-field intensity at the atomic sensor. An electric-field-intensity-angle response model is then established for AoA estimation of a 13.6 GHz wave or signal. Simulation results demonstrate that the proposed method can determine the incident direction within a certain angular range, with an estimation error of less than 3.8°. Without the need for self-calibration and free from interference caused by actively emitted probing electromagnetic waves or reference electric fields, the proposed approach enables AoA determination of incident waves or signals using a single vapor cell with a length of 5 cm.

Sensors•Aug 11, 2026•1 citation

Angle-of-Arrival Determination of Radio-Frequency Fields Using Stark-Shifted Rydberg-EIT Spectra

Rajavardhan Talashila, Zoya B. Popovic, Nikunjkumar Prajapati +2 more

We demonstrate a method for determining the magnitude of the angle of arrival (AoA) of a linearly polarized radio-frequency (RF) field using the angle-dependent spectral amplitudes of AC Stark-shifted electromagnetically induced transparency (EIT) resonances. An off-resonant RF field produces distinct Stark shifts of the $|m_J|$ sublevels, while their relative excitation strengths depend strongly on the relative orientation of the RF and optical polarizations. Under the controlled polarization geometry considered here, this dependence enables determination of the AoA magnitude without requiring RF phase measurements or spatially separated sensing locations. We experimentally demonstrate the method at RF frequencies of 1.27 GHz, 2 GHz, 3 GHz, and 4 GHz using a subwavelength cesium vapor cell. Within the $20^\circ-40^\circ$ region of highest angular sensitivity, the estimated repeatability-based $1σ$ AoA uncertainty ranges from approximately $0.6^\circ$ to $2^\circ$ across the investigated RF frequencies. A model combining Floquet-Shirley calculations of the RF-dressed Rydberg states with a coherent hyperfine-to-fine-structure optical excitation model qualitatively reproduces the experimental observations. These results establish a path toward compact, phase-independent AoA sensing using spatially localized Rydberg-atom spectroscopy.

arXiv:2609.17459•Sep 15, 2026•0 citations

Digital Beamforming and Receiving Array Research Based on Rydberg Field Probes

Ruiqi Mao, Yi Lin, Yunqi Fu +2 more

The electric field sensing technology based on the Rydberg atom has attracted widespread attention due to its powerful detection ability for the amplitude, phase, and polarization of the electric field. In this work, based on the electromagnetically induced transparency (EIT) of the Rydberg atom and combined with a heterodyne Rydberg atom-based mixer, we measured the binary array composed of the Rydberg Field Probes (RFPs). The measured phase difference of the electric field at two different RFPs is related to the direction of incidence. We digitally transform the received signal at 2.63 GHz and conduct digital beamforming (DBF) processing to obtain its array pattern and beam direction. The measurement accuracy and reliability are greatly improved compared with the phase comparison method, and the angle-of-arrival (AOA) variance is less than 1.5°. The effectiveness of DBF based on the Rydberg atomic sensor is verified, which lays the foundation for the subsequent linear and planar array reception of the Rydberg atomic sensor. In addition, the occlusion based on RFPs is also measured, and its weak occlusion characteristics are confirmed. This unique feature provides feasible support for the 3-D receiving array based on the Rydberg atomic sensor.

IEEE Transactions on Antennas and Propagation•Nov 1, 2023•41 citations

Optimizing Vapor Cells for Rydberg Atom-Based Electrometer Applications

Dhriti Maurya, Alexandra B. Artusio‐Glimpse, Adil Meraki +2 more

We present a comprehensive numerical investigation into the radio frequency (RF) field behavior within miniaturized all-glass and hybrid vapor cell geometries designed for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant "open" cells and periodically structured "supported" cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle- and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. Our findings open new possibilities for optimizing vapor cell architectures to enhance field sensitivity, directional and polarization selectivity, and integration potential in chip-scale quantum sensing platforms based on Rydberg atoms.

arXiv:2509.07823•Sep 9, 2025•2 citations

Determining the angle-of-arrival of a radio-frequency source with a Rydberg atom-based sensor

Amy K. Robinson, Nikunjkumar Prajapati, Damir Senić +2 more

In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle of arrival of an incident radio frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside an atomic vapor cell. The phase difference at these two locations is related to the direction of arrival of the incident RF wave. To demonstrate this approach, we measure phase differences of an incident 19.18 GHz wave at two locations inside a vapor cell filled with cesium atoms for various incident angles. Comparisons of these measurements with both the full-wave simulation and the plane wave theoretical model show that these atom-based sub-wavelength phase measurements can be used to determine the angle of arrival of an RF field.

arXiv:2101.12071•Applied Physics Letters•Mar 15, 2021•178 citations
This paper presents a full-wave electromagnetic study of a three-cell Rydberg atomic antenna array for angle-of-arrival (AoA) sensing, with emphasis on the angle-dependent field distributions inside the vapor cells. The analysis focuses on the electric-field magnitude sampled along the optical path of each cell under 2.75 GHz signal-only plane-wave incidence. The results show that, for the present design, the signal field inside the vapor cells exhibits clear angular dependence. For the single-cell case, the field distribution changes most significantly from 90° to 140°, while the responses gradually become similar from 150° to 180°. For the three-cell array, all cells show the strongest angle sensitivity in the range of 90° to 130°, whereas 160° to 180° forms a weak-response region. Additional comparison based on separate illumination of the second and third vapor cells shows that their field distributions remain nearly unchanged from those in the full array, indicating that the blockage effect is weak under the current layout. These results show that the proposed array preserves distinguishable angle-dependent electric-field distributions across different vapor cells, thereby supporting subsequent AoA experiments based on LO-assisted atomic mixing and IF-phase comparison and providing useful guidance for the layout optimization of multi-cell Rydberg atomic arrays.
Microwave angle-of-arrival(AoA) measurement is essential for radar, communication, and spectrum mon-itoring. Existing Rydberg-atom-based AoA schemes employ phase-difference measurements with local oscil-lators, standing-wave fluorescence imaging, or amplitude-ratio readout with internal metal reflectors. Here we demonstrate a new approach: a cylindrical glass vapor cell serving directly as an angle-encoding dielectric structure, eliminating the need for multiple apertures, local oscillators, or imaging optics. The cylindrical geometry produces angle-dependent reflection and field redistribution, mapping the incident AoA onto the effective microwave field sampled by the Rydberg ensemble. This effective field is read out optically via the Autler-Townes(A-T) splitting in the electromagnetically induced transparency(EIT) spectrum. Full-wave simulations and experiments at 11.64 GHz confirm a deterministic, geometry-mediated response over 0°-90°.Over the monotonic operating range(55°-125°), the angular resolution(minimum distinguishable increment)is 0.05°, and the angular accuracy(RMSE of repeated measurements) is 0.13° across the full range, improving to 0.05° in the optimal region(65°-115°). Occupying a sensing volume of~2.5 cm3, this method offers a compact, single-sensor pathway toward Rydberg AoA receivers.
The determination of the angle of arrival (AoA) of Ku-band microwave signals is of great significance in satellite communications, spectrum monitoring, and national defense security, which has created an urgent demand for high-precision and interference-resistant passive detection techniques. In this study, we propose a Rydberg-atom-based passive measurement method for estimating the AoA of Ku-band incident signals. Based on well-established quantum optical techniques, the proposed method converts the EIT-AT splitting intervals induced by waves or signals incident from different directions in Rydberg atoms within a single vapor cell into the electric-field intensity at the atomic sensor. An electric-field-intensity-angle response model is then established for AoA estimation of a 13.6 GHz wave or signal. Simulation results demonstrate that the proposed method can determine the incident direction within a certain angular range, with an estimation error of less than 3.8°. Without the need for self-calibration and free from interference caused by actively emitted probing electromagnetic waves or reference electric fields, the proposed approach enables AoA determination of incident waves or signals using a single vapor cell with a length of 5 cm.
We demonstrate a method for determining the magnitude of the angle of arrival (AoA) of a linearly polarized radio-frequency (RF) field using the angle-dependent spectral amplitudes of AC Stark-shifted electromagnetically induced transparency (EIT) resonances. An off-resonant RF field produces distinct Stark shifts of the ∣mJ∣|m_J|∣mJ​∣ sublevels, while their relative excitation strengths depend strongly on the relative orientation of the RF and optical polarizations. Under the controlled polarization geometry considered here, this dependence enables determination of the AoA magnitude without requiring RF phase measurements or spatially separated sensing locations. We experimentally demonstrate the method at RF frequencies of 1.27 GHz, 2 GHz, 3 GHz, and 4 GHz using a subwavelength cesium vapor cell. Within the 20∘−40∘20^\circ-40^\circ20∘−40∘ region of highest angular sensitivity, the estimated repeatability-based 1σ1σ1σ AoA uncertainty ranges from approximately 0.6∘0.6^\circ0.6∘ to 2∘2^\circ2∘ across the investigated RF frequencies. A model combining Floquet-Shirley calculations of the RF-dressed Rydberg states with a coherent hyperfine-to-fine-structure optical excitation model qualitatively reproduces the experimental observations. These results establish a path toward compact, phase-independent AoA sensing using spatially localized Rydberg-atom spectroscopy.
The electric field sensing technology based on the Rydberg atom has attracted widespread attention due to its powerful detection ability for the amplitude, phase, and polarization of the electric field. In this work, based on the electromagnetically induced transparency (EIT) of the Rydberg atom and combined with a heterodyne Rydberg atom-based mixer, we measured the binary array composed of the Rydberg Field Probes (RFPs). The measured phase difference of the electric field at two different RFPs is related to the direction of incidence. We digitally transform the received signal at 2.63 GHz and conduct digital beamforming (DBF) processing to obtain its array pattern and beam direction. The measurement accuracy and reliability are greatly improved compared with the phase comparison method, and the angle-of-arrival (AOA) variance is less than 1.5°. The effectiveness of DBF based on the Rydberg atomic sensor is verified, which lays the foundation for the subsequent linear and planar array reception of the Rydberg atomic sensor. In addition, the occlusion based on RFPs is also measured, and its weak occlusion characteristics are confirmed. This unique feature provides feasible support for the 3-D receiving array based on the Rydberg atomic sensor.
We present a comprehensive numerical investigation into the radio frequency (RF) field behavior within miniaturized all-glass and hybrid vapor cell geometries designed for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant "open" cells and periodically structured "supported" cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle- and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. Our findings open new possibilities for optimizing vapor cell architectures to enhance field sensitivity, directional and polarization selectivity, and integration potential in chip-scale quantum sensing platforms based on Rydberg atoms.
In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle of arrival of an incident radio frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside an atomic vapor cell. The phase difference at these two locations is related to the direction of arrival of the incident RF wave. To demonstrate this approach, we measure phase differences of an incident 19.18 GHz wave at two locations inside a vapor cell filled with cesium atoms for various incident angles. Comparisons of these measurements with both the full-wave simulation and the plane wave theoretical model show that these atom-based sub-wavelength phase measurements can be used to determine the angle of arrival of an RF field.