Crossing a quantum critical point in finite time challenges the adiabatic condition due to the closing of the energy gap, which ultimately results in the formation of excitations. Such nonadiabatic excitations are typically deemed detrimental in many scenarios, and consequently several strategies have been put forward to circumvent their formation. Here, however, we show how these nonadiabatic excitations—originated from the failure to meet the adiabatic condition due to the presence of a quantum critical point—can be controlled and thus harnessed to perform certain tasks advantageously. We focus on closed cycles reaching the quantum critical point of fully connected models analyzing two examples. First, a quantum battery that is loaded by approaching a quantum critical point, whose stored and extractable work increases exponentially via repeating cycles. Second, a scheme for the fast preparation of spin squeezed states containing multipartite entanglement that offer a metrological advantage, analogous to a two-axis twisting scheme. The corresponding figure of merit in both examples crucially depends on the universal critical exponents and the scaling of the protocol in the vicinity of the transition. Our results highlight the rich interplay between quantum thermodynamics and metrology with critical nonequilibrium dynamics.
Crossing a quantum critical point in finite time challenges the adiabatic condition due to the closing of the energy gap, which ultimately results in the formation of excitations. Such nonadiabatic excitations are typically deemed detrimental in many scenarios, and consequently several strategies have been put forward to circumvent their formation. Here, however, we show how these nonadiabatic excitations—originated from the failure to meet the adiabatic condition due to the presence of a quantum critical point—can be controlled and thus harnessed to perform certain tasks advantageously. We focus on closed cycles reaching the quantum critical point of fully connected models analyzing two examples. First, a quantum battery that is loaded by approaching a quantum critical point, whose stored and extractable work increases exponentially via repeating cycles. Second, a scheme for the fast preparation of spin squeezed states containing multipartite entanglement that offer a metrological advantage, analogous to a two-axis twisting scheme. The corresponding figure of merit in both examples crucially depends on the universal critical exponents and the scaling of the protocol in the vicinity of the transition. Our results highlight the rich interplay between quantum thermodynamics and metrology with critical nonequilibrium dynamics.
Crossing a quantum critical point in finite time challenges the adiabatic condition due to the closing of the energy gap, which ultimately results in the formation of excitations.Such nonadiabatic excitations are typically deemed detrimental in many scenarios, and consequently several strategies have been put forward to circumvent their formation.Here, however, we show how these nonadiabatic excitations-originated from the failure to meet the adiabatic condition due to the presence of a quantum critical point-can be controlled and thus harnessed to perform certain tasks advantageously.We focus on closed cycles reaching the quantum critical point of fully connected models analyzing two examples.First, a quantum battery that is loaded by approaching a quantum critical point, whose stored and extractable work increases exponentially via repeating cycles.Second, a scheme for the fast preparation of spin squeezed states containing multipartite entanglement that offer a metrological advantage, analogous to a two-axis twisting scheme.The corresponding figure of merit in both examples crucially depends on the universal critical exponents and the scaling of the protocol in the vicinity of the transition.Our results highlight the rich interplay between quantum thermodynamics and metrology with critical nonequilibrium dynamics.
Abstract Starting from the observation that the reduced state of a system strongly coupled to a bath is, in general, an athermal state, we introduce and study a cyclic battery–charger quantum device that is in thermal equilibrium, or in a ground state, during the charge storing stage. The cycle has four stages: the equilibrium storage stage is interrupted by disconnecting the battery from the charger, then work is extracted from the battery, and then the battery is reconnected with the charger; finally, the system is brought back to equilibrium. At no point during the cycle are the battery–charger correlations artificially erased. We study the case where the battery and charger together comprise a spin-1/2 Ising chain, and show that the main characteristics—the extracted energy and the thermodynamic efficiency—can be enhanced by operating the cycle close to the quantum phase transition point. When the battery is just a single spin, we find that the output work and efficiency show a scaling behavior at criticality and derive the corresponding critical exponents. Due to always present correlations between the battery and the charger, operations that are equivalent from the perspective of the battery can entail different energetic costs for switching the battery–charger coupling. This happens only when the coupling term does not commute with the battery’s bare Hamiltonian, and we use this purely quantum leverage to further optimize the performance of the device.
Driven quantum systems are systems in which a set of parameters obeys a time-dependent protocol, both periodic and non-periodic. The study of these systems bridges theoretical advances with experimental realizations in a variety of platforms—these range from quantum dot arrays to molecular junctions to trapped ions. The theoretical study is challenging due to the inherent non-equilibrium nature of the problem. These systems offer an interesting playground for quantum thermodynamics. They can be studied as quantum machines, such as refrigerators, heat pumps or engines. This poses the challenge of redefining the laws of thermodynamics in the quantum realm. This effort implies taking into account the presence of coherence, entanglement and strong correlations with the environment. In this conceptual framework, we attempt to shed new light on specific setups with applications in quantum metrology. In the first part of the Thesis, we present novel results on the thermodynamics and transport properties of quantum dots. After thoroughly introducing the main methods, namely non-equilibrium Green's functions and scattering matrix techniques, we apply these tools to adiabatic charge pumping. In this context, quantum dots, subjected to external periodic driving, act as nano-mechanical engines, transferring charge from a source to a drain. We investigate the conditions under which the pumped charge becomes quantized and how thermodynamic quantities behave in this regime. Next, we will focus on the charge shuttle mechanism in movable quantum dots as an example of a quantum clock. This physical model describes transport through a molecular state bound to two leads by van der Waals forces, with an electric field pushing the molecule from the source to the drain. The periodic oscillations arising from the system's dissipative limit cycle solution provide the basis for time measurement. We examine quantum noise primarily associated with the tunnelling process. In the second part, we propose a quantum clock that utilizes the free energy resources generated by coupling to a quantum battery, consisting of an integrable spin chain driven out of equilibrium by a quench in a chosen parameter. The operating conditions of the clock in the manifold of parameters are examined, leading to the requirement of the crossing of the critical point in the battery. The lifetime of the battery's resources is found to be extensive in its size, even when choosing a global coupling observable in the battery.
Generating macroscopic quantum entanglement is central to quantum metrology. While traversing a quantum critical point yields Heisenberg-limited precision, adiabatic schemes are restricted by slow dynamics and decoherence. Here, we propose a non-adiabatic Floquet protocol in a single-cavity Bose-Einstein condensate to circumvent these limitations. By applying rapid rotations and phase jumps, we dynamically synthesize effective Two-Axis Twisting (TAT) interactions from native longitudinal couplings. To evaluate this beyond mean-field limits, we develop an exact finite-state automaton Matrix Product Operator (MPO) encoding that strictly bounds the virtual dimension to O(1), enabling exact DMRG and TDVP simulations for large systems. Tracking non-equilibrium Floquet TAT dynamics and environmental decoherence for N=103 ensembles, we demonstrate that the quench rapidly generates Heisenberg-limited spin squeezing (ξR2∼1/N). The microsecond timescale of this protocol decouples the generation process from typical millisecond decoherence, with phenomenological models revealing an optimal extraction time near t≈3.26μs. This work establishes a feasible route for realizing Heisenberg-limited metrology in current cavity-QED platforms.
Abstract Achieving rapid charging in quantum batteries requires the efficient harnessing of quantum resources, which is a task with great challenge experimentally. Here we propose and experimentally realize a quantum battery charging protocol that enables fast injection of substantial energy using a trapped-ion platform governed by the quantum Rabi model (QRM). The core of the protocol lies in the employment of the squeezing effect and the QRM criticality. Reinforcement learning further improves the charging performance by optimizing the preparation of the squeezed and anti-squeezed states and accelerating energy inflow near criticality. Experimental implementation with a single 171Yb+ ion demonstrates the feasibility of the protocol, where the vibrational mode (i.e., quantized phonons) acts as the quantum battery. We witness that both the maximally extractable work (i.e., ergotropy) and the charging power exhibit criticality-induced enhancement. This work provides a practical pathway toward criticality-enhanced quantum batteries, underscoring the potential of squeezing-mediated amplification and displacement-based energy storage in realistic quantum systems.
We investigate the physical requirements to reach the ultimate limits of ground-state metrology -- i.e., the estimation of an unknown parameter θ of an N-body Hamiltonian via measurements on its ground state -- using many-body probes featuring either short-range or long-range interactions. We characterize the conditions to saturate two fundamental limits of the quantum Fisher information Fθ: the static ground-state bound Fθ≲N2/Δ2, where Δ is the spectral gap, and the dynamical Heisenberg limit Fθ≲N2τ2, where τ is the total protocol duration. To saturate the static limit, we argue that short-range interacting systems require a spectral gap that closes with N. At second-order quantum critical points this leads to a universal condition on the critical exponents, ν(d+z)=1, which can be approached arbitrarily closely, as we show for the XXZ chain; cat-like ground states at first-order transitions provide an alternative route to static optimality. In contrast, we find that all-to-all interacting models can achieve optimality even in gapped regimes. Furthermore, reaching the dynamical bound is tightly related to the ground-state preparation time; we demonstrate that its optimal, inverse-gap profile can be obtained via local adiabatic protocols. By analyzing paradigmatic systems -- the transverse-field Ising chain, the XXZ chain, a squeezing Hamiltonian, and the two-mode Bose-Hubbard model -- we identify specific many-body probes capable of approaching both limits. Overall, our results provide a theoretical basis for the design of (local) many-body ground-state sensors operating at the ultimate limits of quantum precision.