Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Towards ultrafast quantum processing: generation and storage of ultrafast photonic quantum states

Kai Shinbrough

Published May 21, 2024• 0 citations
OpenAlex

Abstract

This thesis is divided into five parts, each with an accompanying publication. In Chapter 1, I motivate the broad scientific pursuit that underlies this thesis: the quest to build universal, fault-tolerant technology that operates on the principles of quantum mechanics and quantum information theory. I motivate the use of single photons as the quantum particles of choice for this task, and I describe the open challenges facing the field of researchers embarking on this quest. This motivation pervades each subsequent chapter of this thesis, which focus in turn on overcoming four distinct technological and scientific hurdles related to these open challenges. The first of these open challenges is to demonstrate experimentally a useful single-photon source. This source of single photons ought to release just one photon at a time, in an on-demand fashion, with high-rate, low-latency, and high quantum-state purity and indistinguishability, in a single spatial mode, at the right wavelengths for a given application, and ought to satisfy certain practical constraints on size, weight, power, and sensitivity to environmental noise and perturbation. This is a long list of performance metrics, some of which are orthogonal, some not, and non-trivial tradeoffs often exist between metrics. While in this thesis we do not present a solution to this general open problem, we modestly expand scientific knowledge of one of the fundamental mechanisms behind single-photon generation. In particular, we present a new formalism for describing the quantum properties of spontaneous Stokes scattering in the Raman interaction, and we probe its effects on the quantum state purity of resulting Stokes photons both experimentally and theoretically. This is the focus of Chapter 2. Another open challenge to universal, fault-tolerant photonic quantum processing is the experimental demonstration of a useful photonic quantum memory—a device that is capable of storing and releasing single photons in a quantum-information-conserving manner, and which possesses sufficiently high performance across, again, a large set of non-orthogonal metrics. On this challenge, we have made several substantial contributions. Chapter 3 describes a novel approach to optimizing the efficiency of photonic quantum memories in atomic ensembles possessing a three-level Lambda-type energy level structure, in an experimentally friendly fashion. Chapter 4 discusses the practical side of implementing robust quantum memory in these atomic systems, where we carefully consider the theoretical sensitivity of these systems to experimental noise and perturbation. These two Chapters lead up to the experimental work described in Chapter 5, where we experimentally demonstrate a state-of-the-art and best-in-class photonic quantum memory in neutral barium vapor that possesses simultaneously high efficiency, broad bandwidth, and low noise. Our experimental demonstration features >95% storage efficiency, at roughly 3 orders of magnitude larger bandwidth (higher speed) than the previous state of the art, as well as record-low noise for Lambda-type atomic memories. The noise is so low, and the bandwidth so large, that we are able to perform a novel characterization experiment to extract the temporal amplitude and phase of the photons retrieved from our memory, based on spectral interferometry with a known reference. This is the most demanding possible characterization of one of these memories, and has direct implications for using this type of memory in quantum processing tasks that require temporally indistinguishable photons. In Chapter 6 I do the requisite summing up of the thesis, and discuss ongoing and future work on the memory project. In the various and sundry appendices I include information that will chiefly be useful for my successors in the lab, but may be of passing interest to other readers.

Related papers

Engineering a noise-free quantum memory for temporal mode manipulation

T. M. Hird

An optical quantum memory, a device which can store and retrieve on demand an arbitrary quantum state at the single photon level, has been identified as a significant cornerstone of photonic quantum technologies. The development of such a memory would allow the creation and development of a large number of quantum technologies. These would range from the ability to synchronise processing steps in an optical quantum computer, to the construction of a quantum repeater which would allow faithful transmission of quantum states over arbitrarily long distances. In this thesis I investigate broadband light storage in a room-temperature Raman memory for purposes of quantum information processing with photons. During the course of this thesis, a novel scheme to suppress four-wave mixing noise is simulated, based on equations derived to describe the physics of the memory interaction. The experimental arrangement to test the suppression method is described and an original method using photon statistics is demonstrated. The results of these experiments prove the ability of the memory to retrieve and maintain the non-classicality of the state, given a single photon input. Following the affirmation that, using this noise suppression technique, the memory can function at the single-photon level, I go on to consider how the temporal-spectral properties of a pulsed mode of light may be manipulated using the memory. There are two primary reasons for this investigation: 1) Increasing the efficiency of the read-in process by carving the optimum mode of the memory 2) Using the memory as a device operating in a high dimensional quantum information basis. The restrictions of such applications are considered and a method to test the efficacy of transformations in this basis is devised and experimentally tested. I also perform demonstrations of light storage using conventional temporal modes using a novel method of velocity selection within warm vapour. Finally I detail further experiments that are achievable with the Raman quantum memory given the progress that has been achieved during my DPhil research. The results show that the Raman memory is a viable candidate for a practical route towards low-noise quantum storage and for manipulation of temporal modes of light.

•Jan 1, 2021•0 citations

Efficient, low noise, mode-selective quantum memory

Sarah E. Thomas

Photonic quantum information processing is a key element for scalable quantum technologies, and has applications in secure long-distance quantum communication and connecting nodes of a quantum computation network. However, logical photon-photon gates and state-of-the-art single photon sources rely on probabilistic processes. Quantum memories are devices that enable storage and on-demand recall of quantum states of light, and have been highlighted as a vital component in photonic networks to overcome the scaling problem by synchronising probabilistic processes. The Raman memory has a large storage bandwidth and high synchronising capacity, and is an ideal candidate for local synchronisation. However, previous demonstrations of the Raman memory suffer from four-wave mixing noise, which prohibits quantum level operation. In this thesis I investigate methods to increase the signal to noise ratio in the Raman memory. I investigate increasing the light-matter coupling strength to boost the memory efficiency, and then explore two different methods to suppress four-wave mixing noise. I demonstrate that operating the Raman memory in a cavity is successful in reducing four-wave mixing, but it is technically challenging to maintain a high memory efficiency. I investigate a new method of noise suppression by introducing an absorption feature at the frequency of the unwanted noise field. This technically simple method is successful in reducing the noise by an order of magnitude, and will be applicable to many quantum memory protocols. In the final section of this thesis I explore the temporal mode properties of the Raman memory. I demonstrate that the Raman memory is single mode and can be used to separate and manipulate temporal modes of light. This positions the Raman memory as a key device for enabling high-dimensional photonic quantum information processing, and enhancing light-matter interactions. These results pave the way towards an efficient, low-noise, mode-selective quantum memory.

•Apr 1, 2019•0 citations

Single-photon-level quantum memory for photonic states encoded in orbital angular momentum space

Bao‐Sen Shi, Guang‐Can Guo

Quantum memory is a key component of quantum networks. A successful development in enabling the distribution of quantum information requires the storage of single-photon light. Usually quantum information is encoded using a 2D space, spanned, for example, by the orthogonal polarization states of a photon. In this case, each photon carries a quantum bit of information. If the photon could be encoded in a high-dimensional space instead, the information carried by each photon could be increased from a bit to |$\log {}_2d$| bits, where d is the dimension of the Hilbert space in which the photon is described. The channel capacity of the network and the transmission efficiency would then be greatly enlarged [1]. Moreover, storing high-dimensional states in quantum memory can reduce its sensitivity to memory coherence time [2], leading to significant improvements in storage capacity [3]. It is thus no surprise that many research groups are actively working on different physical systems for storing light encoded using a high-dimensional space. The degrees of freedom for position, linear momentum, time-bin or orbital angular momentum (OAM) of a photon can all be considered as a high-dimensional space for encoding. The photon's OAM has the most potential for encoding [4]. Electromagnetic waves have both spin and OAM. Spin angular momentum produces polarization. Photons with OAM can be regarded as helices with left and right handedness twisted to varying degrees (Fig. 1). Information is encoded using this handedness and the amount of twist. Because of the inherent infinite degrees of freedom for OAM, a photon can in principle carry an arbitrarily large amount of information, and hence the eagerness to store light encoded in OAM space. Although some work on this has been reported for different physical systems, what is lacking is a way of storing and releasing at some later time a true single photon, including its shape and structure [5–7]. Constructing this basic element of quantum memory has been a major challenge. The wavefront of an OAM light is a helical structure (left and center), with an optical vortex at its center in the intensity distribution of light (right). The vortex of light can carry non-zero OAM of any order m. OAM states of a different order are orthogonal. A group at the Key Laboratory of Quantum Information, Chinese Academy of Science, at the University of Science and Technology of China finally resolved this problem [8]. They reported on the first experimental realization of a true single-photon-carrying OAM stored via electromagnetically induced transparency (EIT) in a cold atomic ensemble (Fig. 2). With such a suitable candidate, this work indicates a means of constructing high-dimensional quantum memory. After this, similar results were reported by Laurat's group at Laboratoire Kastler Brossel, at Université Pierre et Marie Curie in France [9], where an extremely weak laser at single-photon level carrying OAM was also stored via EIT in a cold atomic ensemble. Ding et al. [8] first prepared two cold 85Rb atomic clouds in two magnetic-optical traps (MOT) using laser cooling and trapping techniques. They generated non-classical correlated photon pairs using spontaneous four-wave mixing in an atomic cloud. One photon of each pair was used as a trigger; the other mapped and stored in a second atomic cloud via EIT. Each photon to be stored carried one OAM unit. After a programed storage time, the photon was retrieved. What they achieved during storage included (1) proof that the non-classical correlation between the trigger photon and the retrieved photon is retained by demonstrating a strong violation of the Cauchy–Schwarz inequality, (2) a demonstration that the single-photon property of the signal photon is maintained by performing the Hanbury–Brown and Twiss experiment on the trigger photon, (3) proof that the spatial structure of the photon is also very well preserved by showing a high similarity between input and output, and (4) evidence, gathered by Sagnac interferometry, that the coherence of a single photon is also preserved. A heralded single photon is generated through spontaneous four-wave mixing in MOT 1 (a); this single photon carrying OAM is then stored through EIT in MOT 2 (b); (c) shows an image of the photon carrying OAM. Experimental measurements in the transverse position of the image carried by the photon before and after storage are presented in (d) and (e), respectively; (f) shows the simplified experimental setup for storage of a superposition of OAM. Interference patterns taken at different angle settings of the half-wave plate are shown in (g). The left column represents the experimental angle settings of the half-wave and the quarter-wave plates, the middle column gives the experimental results, and the right column gives results from theoretical simulations; (h) and (i) present the interference patterns of the input signal photon and the retrieved signal with plate angle, respectively. This is a significant breakthrough towards the realization of a quantum internet and, potentially, quantum computing. This work addresses the ability to generate, store, retrieve on demand an arbitrary single-photon-level photonic state encoded in OAM space. It signifies an important step in the development of practical quantum-enabled technologies, opens up the possibility for realizing high-dimensional quantum memories based on this degree of freedom of light, and will have a large impact in a broad physical community, especially in the quantum information and quantum optics communities. The Technology Review website of MIT comments on their work very positively with an article entitled ‘First Quantum Memory That Records the Shape of a Single Photon Unveiled in China’. Further, Nature Photonics selected this work as a research highlight. Clearly, memory that can preserve the spatial structure of photons will make the internet far more flexible and capable. Of course, there are still many basic problems remaining that need to be solved to build the future quantum internet, one of which is the construction of quantum memory exploiting entanglement. This derives from the fact that a quantum network needs the distribution of quantum-entangled photons over channels between different nodes [10]. A high-dimensional quantum internet needs to store OAM-entangled states and perform entanglement swapping to efficiently extend the achievable communication distances. While Ding et al. [8] reported the storage of light with OAM at the single-photon level, the photon was, however, still encoded in a 2D space. Therefore, whether it is possible to construct a high-dimensional quantum memory remains an open issue that needs to be investigated further.

National Science Review•Aug 20, 2014•2 citations

Towards storage and retrieval of non-classical light in a broadband quantum memory - An investigation of free-space and cavity Raman memories

T. F. M. Champion

Photonic quantum information processing has emerged as a powerful platform for realising quantum-enhanced technologies. In order to be scalable, many of these technologies depend on the availability of a suitable quantum memory for the coherent storage and on-demand retrieval of photonic quantum states. In this thesis, I investigate broadband light storage in a room-temperature Raman memory, implemented both in free space and, for the first time, inside a low-finesse optical cavity designed for low-noise operation. The ability of the Raman memory to preserve phase coherence was tested by storing coherent polarisation states in two spatially separate atomic ensembles. Polarisation storage with a fidelity of up to 97 ± 1% was demonstrated by performing full process tomography on the system. The Raman memory was then interfaced for the first time with a spontaneous parametric downconversion (SPDC) source of heralded, GHz-bandwidth single photons. The memory performance was characterised by measuring the second-order autocorrelation of the retrieved fields. While the SPDC input photon statistics showed a clear influence on the statistics of the retrieved field, four-wave mixing (FWM) noise, stimulated by spontaneous Raman scattering, prevented the preservation of non-classical photon statistics during read-out. Suppressing this source of noise represents the last remaining challenge for realising a broadband single-photon Raman memory suitable for quantum information applications. To this end, I demonstrate a novel cavity implementation of the Raman memory which reduces the FWM contribution relative to the signal field by re-distributing the density of states into which the noise photons can be scattered. Cavity-enhanced memory operation was investigated using weak coherent input states, showing a significant improvement of the signal-to-noise ratio compared to the free-space memory implementation. This proof-of-principle demonstration suggests that cavity Raman memories may offer a practical route towards low-noise, high-bandwidth quantum storage at room temperature.

•Jan 1, 2015•0 citations

Photonic quantum information science for stochastic simulation and non-locality

Farzad Ghafari

Since its inception, quantum information processing (QIP) has been branched into many new directions. As well as well-known applications such as teleportation and metrology, researchers are beginning to investigate interdisciplinary areas such as quantum machine learning. One of the interesting areas is where quantum information science meets stochastic modelling, from the field of complexity science. Recently, it has been shown theoretically that, for simulating classical systems, quantumassisted models and simulators are more efficient in terms of memory storage they require to do simulations, compared with classical computers. That is, for most systems, classical simulators demand an excessive amount of memory storage, while quantum simulators can do the same simulation with less memory. The main focus of this thesis is on experimental realisation of quantum simulators that are capable of simulating stochastic processes with a reduced amount of memory. To implement the (nearly) exact simulation of stochastic processes using quantum simulators, it is essential to have low-noise state preparation, robust unitary operations, and high-precision read-out. These requirements, and the flexibility and precision of photonic quantum optics, make photonics the ideal system for developing the science of this new quantum advantage and for making strides towards its technological realisation. In the context of stochastic simulation, I have experimentally studied three key problems that serve as stepping stones in advancing this new field. In the first experiment, an error-tolerant quantum simulator was designed, and realised to simulate a 1D Ising spin chain, using internal states that store less information than the corresponding classical approach. Furthermore, an interesting and fundamental phenomenon named the ambiguity of simplicity is witnessed. This is the inconsistency that we observe in the order of relative complexity of two systems when we change the simulators from classical to quantum. In the second experiment, a quantum simulator was built that can simulate classical processes for more than one step of the simulation at a time, storing the information from multiple steps coherently. In the third experiment, a new type of quantum memory advantage, which is based on the dimensionality of the memory register, rather than on information entropy measure, is demonstrated. This advantage is realisable in a single simulator, in contrast to previous works. Realising the dimensionality memory advantage in practical applications does not rely on running multiple simulators in parallel.In the field of optical QIP, realising an ideal single-photon source has been a longstanding challenge. In another part of my PhD, I have worked on a source that aims to tackle some of the existing issues in this context. We built a source of high-quality entangled photons with a high heralding efficiency, which has the potential to be used in multi-photon experiments. This source was also essential to demonstrate a fundamental task in quantum non-locality, one-way steering, which was performed conclusively for the first time.

•Jul 8, 2019•0 citations

Towards scalable photonics via quantum storage

Joshua Nunn, Nathan K. Langford, W. S. Kolthammer +6 more

Single photons are a vital resource for optical quantum information processing. Efficient and deterministic single photon sources do not yet exist, however. To date, experimental demonstrations of quantum processing primitives have been implemented using non-deterministic sources combined with heralding and/or postselection. Unfortunately, even for eight photons, the data rates are already so low as to make most experiments impracticable. It is well known that quantum memories, capable of storing photons until they are needed, are a potential solution to this `scaling catastrophe'. Here, we analyze in detail the benefits of quantum memories for producing multiphoton states, showing how the production rates can be enhanced by many orders of magnitude. We identify the quantity $eta B$ as the most important figure of merit in this connection, where $eta$ and $B$ are the efficiency and time-bandwidth product of the memories, respectively. We go on to review our progress in implementing the most broadband memory to date, with $B<1000$, in room-temperature cesium vapour. We consider the noise properties for single photon storage and the integration of the memory using waveguides.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 6, 2013•2 citations
This thesis is divided into five parts, each with an accompanying publication. In Chapter 1, I motivate the broad scientific pursuit that underlies this thesis: the quest to build universal, fault-tolerant technology that operates on the principles of quantum mechanics and quantum information theory. I motivate the use of single photons as the quantum particles of choice for this task, and I describe the open challenges facing the field of researchers embarking on this quest. This motivation pervades each subsequent chapter of this thesis, which focus in turn on overcoming four distinct technological and scientific hurdles related to these open challenges. The first of these open challenges is to demonstrate experimentally a useful single-photon source. This source of single photons ought to release just one photon at a time, in an on-demand fashion, with high-rate, low-latency, and high quantum-state purity and indistinguishability, in a single spatial mode, at the right wavelengths for a given application, and ought to satisfy certain practical constraints on size, weight, power, and sensitivity to environmental noise and perturbation. This is a long list of performance metrics, some of which are orthogonal, some not, and non-trivial tradeoffs often exist between metrics. While in this thesis we do not present a solution to this general open problem, we modestly expand scientific knowledge of one of the fundamental mechanisms behind single-photon generation. In particular, we present a new formalism for describing the quantum properties of spontaneous Stokes scattering in the Raman interaction, and we probe its effects on the quantum state purity of resulting Stokes photons both experimentally and theoretically. This is the focus of Chapter 2. Another open challenge to universal, fault-tolerant photonic quantum processing is the experimental demonstration of a useful photonic quantum memory—a device that is capable of storing and releasing single photons in a quantum-information-conserving manner, and which possesses sufficiently high performance across, again, a large set of non-orthogonal metrics. On this challenge, we have made several substantial contributions. Chapter 3 describes a novel approach to optimizing the efficiency of photonic quantum memories in atomic ensembles possessing a three-level Lambda-type energy level structure, in an experimentally friendly fashion. Chapter 4 discusses the practical side of implementing robust quantum memory in these atomic systems, where we carefully consider the theoretical sensitivity of these systems to experimental noise and perturbation. These two Chapters lead up to the experimental work described in Chapter 5, where we experimentally demonstrate a state-of-the-art and best-in-class photonic quantum memory in neutral barium vapor that possesses simultaneously high efficiency, broad bandwidth, and low noise. Our experimental demonstration features >95% storage efficiency, at roughly 3 orders of magnitude larger bandwidth (higher speed) than the previous state of the art, as well as record-low noise for Lambda-type atomic memories. The noise is so low, and the bandwidth so large, that we are able to perform a novel characterization experiment to extract the temporal amplitude and phase of the photons retrieved from our memory, based on spectral interferometry with a known reference. This is the most demanding possible characterization of one of these memories, and has direct implications for using this type of memory in quantum processing tasks that require temporally indistinguishable photons. In Chapter 6 I do the requisite summing up of the thesis, and discuss ongoing and future work on the memory project. In the various and sundry appendices I include information that will chiefly be useful for my successors in the lab, but may be of passing interest to other readers.
An optical quantum memory, a device which can store and retrieve on demand an arbitrary quantum state at the single photon level, has been identified as a significant cornerstone of photonic quantum technologies. The development of such a memory would allow the creation and development of a large number of quantum technologies. These would range from the ability to synchronise processing steps in an optical quantum computer, to the construction of a quantum repeater which would allow faithful transmission of quantum states over arbitrarily long distances. In this thesis I investigate broadband light storage in a room-temperature Raman memory for purposes of quantum information processing with photons. During the course of this thesis, a novel scheme to suppress four-wave mixing noise is simulated, based on equations derived to describe the physics of the memory interaction. The experimental arrangement to test the suppression method is described and an original method using photon statistics is demonstrated. The results of these experiments prove the ability of the memory to retrieve and maintain the non-classicality of the state, given a single photon input. Following the affirmation that, using this noise suppression technique, the memory can function at the single-photon level, I go on to consider how the temporal-spectral properties of a pulsed mode of light may be manipulated using the memory. There are two primary reasons for this investigation: 1) Increasing the efficiency of the read-in process by carving the optimum mode of the memory 2) Using the memory as a device operating in a high dimensional quantum information basis. The restrictions of such applications are considered and a method to test the efficacy of transformations in this basis is devised and experimentally tested. I also perform demonstrations of light storage using conventional temporal modes using a novel method of velocity selection within warm vapour. Finally I detail further experiments that are achievable with the Raman quantum memory given the progress that has been achieved during my DPhil research. The results show that the Raman memory is a viable candidate for a practical route towards low-noise quantum storage and for manipulation of temporal modes of light.
Photonic quantum information processing is a key element for scalable quantum technologies, and has applications in secure long-distance quantum communication and connecting nodes of a quantum computation network. However, logical photon-photon gates and state-of-the-art single photon sources rely on probabilistic processes. Quantum memories are devices that enable storage and on-demand recall of quantum states of light, and have been highlighted as a vital component in photonic networks to overcome the scaling problem by synchronising probabilistic processes. The Raman memory has a large storage bandwidth and high synchronising capacity, and is an ideal candidate for local synchronisation. However, previous demonstrations of the Raman memory suffer from four-wave mixing noise, which prohibits quantum level operation. In this thesis I investigate methods to increase the signal to noise ratio in the Raman memory. I investigate increasing the light-matter coupling strength to boost the memory efficiency, and then explore two different methods to suppress four-wave mixing noise. I demonstrate that operating the Raman memory in a cavity is successful in reducing four-wave mixing, but it is technically challenging to maintain a high memory efficiency. I investigate a new method of noise suppression by introducing an absorption feature at the frequency of the unwanted noise field. This technically simple method is successful in reducing the noise by an order of magnitude, and will be applicable to many quantum memory protocols. In the final section of this thesis I explore the temporal mode properties of the Raman memory. I demonstrate that the Raman memory is single mode and can be used to separate and manipulate temporal modes of light. This positions the Raman memory as a key device for enabling high-dimensional photonic quantum information processing, and enhancing light-matter interactions. These results pave the way towards an efficient, low-noise, mode-selective quantum memory.
Quantum memory is a key component of quantum networks. A successful development in enabling the distribution of quantum information requires the storage of single-photon light. Usually quantum information is encoded using a 2D space, spanned, for example, by the orthogonal polarization states of a photon. In this case, each photon carries a quantum bit of information. If the photon could be encoded in a high-dimensional space instead, the information carried by each photon could be increased from a bit to |log⁡2d\log {}_2dlog2​d| bits, where d is the dimension of the Hilbert space in which the photon is described. The channel capacity of the network and the transmission efficiency would then be greatly enlarged [1]. Moreover, storing high-dimensional states in quantum memory can reduce its sensitivity to memory coherence time [2], leading to significant improvements in storage capacity [3]. It is thus no surprise that many research groups are actively working on different physical systems for storing light encoded using a high-dimensional space. The degrees of freedom for position, linear momentum, time-bin or orbital angular momentum (OAM) of a photon can all be considered as a high-dimensional space for encoding. The photon's OAM has the most potential for encoding [4]. Electromagnetic waves have both spin and OAM. Spin angular momentum produces polarization. Photons with OAM can be regarded as helices with left and right handedness twisted to varying degrees (Fig. 1). Information is encoded using this handedness and the amount of twist. Because of the inherent infinite degrees of freedom for OAM, a photon can in principle carry an arbitrarily large amount of information, and hence the eagerness to store light encoded in OAM space. Although some work on this has been reported for different physical systems, what is lacking is a way of storing and releasing at some later time a true single photon, including its shape and structure [5–7]. Constructing this basic element of quantum memory has been a major challenge. The wavefront of an OAM light is a helical structure (left and center), with an optical vortex at its center in the intensity distribution of light (right). The vortex of light can carry non-zero OAM of any order m. OAM states of a different order are orthogonal. A group at the Key Laboratory of Quantum Information, Chinese Academy of Science, at the University of Science and Technology of China finally resolved this problem [8]. They reported on the first experimental realization of a true single-photon-carrying OAM stored via electromagnetically induced transparency (EIT) in a cold atomic ensemble (Fig. 2). With such a suitable candidate, this work indicates a means of constructing high-dimensional quantum memory. After this, similar results were reported by Laurat's group at Laboratoire Kastler Brossel, at Université Pierre et Marie Curie in France [9], where an extremely weak laser at single-photon level carrying OAM was also stored via EIT in a cold atomic ensemble. Ding et al. [8] first prepared two cold 85Rb atomic clouds in two magnetic-optical traps (MOT) using laser cooling and trapping techniques. They generated non-classical correlated photon pairs using spontaneous four-wave mixing in an atomic cloud. One photon of each pair was used as a trigger; the other mapped and stored in a second atomic cloud via EIT. Each photon to be stored carried one OAM unit. After a programed storage time, the photon was retrieved. What they achieved during storage included (1) proof that the non-classical correlation between the trigger photon and the retrieved photon is retained by demonstrating a strong violation of the Cauchy–Schwarz inequality, (2) a demonstration that the single-photon property of the signal photon is maintained by performing the Hanbury–Brown and Twiss experiment on the trigger photon, (3) proof that the spatial structure of the photon is also very well preserved by showing a high similarity between input and output, and (4) evidence, gathered by Sagnac interferometry, that the coherence of a single photon is also preserved. A heralded single photon is generated through spontaneous four-wave mixing in MOT 1 (a); this single photon carrying OAM is then stored through EIT in MOT 2 (b); (c) shows an image of the photon carrying OAM. Experimental measurements in the transverse position of the image carried by the photon before and after storage are presented in (d) and (e), respectively; (f) shows the simplified experimental setup for storage of a superposition of OAM. Interference patterns taken at different angle settings of the half-wave plate are shown in (g). The left column represents the experimental angle settings of the half-wave and the quarter-wave plates, the middle column gives the experimental results, and the right column gives results from theoretical simulations; (h) and (i) present the interference patterns of the input signal photon and the retrieved signal with plate angle, respectively. This is a significant breakthrough towards the realization of a quantum internet and, potentially, quantum computing. This work addresses the ability to generate, store, retrieve on demand an arbitrary single-photon-level photonic state encoded in OAM space. It signifies an important step in the development of practical quantum-enabled technologies, opens up the possibility for realizing high-dimensional quantum memories based on this degree of freedom of light, and will have a large impact in a broad physical community, especially in the quantum information and quantum optics communities. The Technology Review website of MIT comments on their work very positively with an article entitled ‘First Quantum Memory That Records the Shape of a Single Photon Unveiled in China’. Further, Nature Photonics selected this work as a research highlight. Clearly, memory that can preserve the spatial structure of photons will make the internet far more flexible and capable. Of course, there are still many basic problems remaining that need to be solved to build the future quantum internet, one of which is the construction of quantum memory exploiting entanglement. This derives from the fact that a quantum network needs the distribution of quantum-entangled photons over channels between different nodes [10]. A high-dimensional quantum internet needs to store OAM-entangled states and perform entanglement swapping to efficiently extend the achievable communication distances. While Ding et al. [8] reported the storage of light with OAM at the single-photon level, the photon was, however, still encoded in a 2D space. Therefore, whether it is possible to construct a high-dimensional quantum memory remains an open issue that needs to be investigated further.
Photonic quantum information processing has emerged as a powerful platform for realising quantum-enhanced technologies. In order to be scalable, many of these technologies depend on the availability of a suitable quantum memory for the coherent storage and on-demand retrieval of photonic quantum states. In this thesis, I investigate broadband light storage in a room-temperature Raman memory, implemented both in free space and, for the first time, inside a low-finesse optical cavity designed for low-noise operation. The ability of the Raman memory to preserve phase coherence was tested by storing coherent polarisation states in two spatially separate atomic ensembles. Polarisation storage with a fidelity of up to 97 ± 1% was demonstrated by performing full process tomography on the system. The Raman memory was then interfaced for the first time with a spontaneous parametric downconversion (SPDC) source of heralded, GHz-bandwidth single photons. The memory performance was characterised by measuring the second-order autocorrelation of the retrieved fields. While the SPDC input photon statistics showed a clear influence on the statistics of the retrieved field, four-wave mixing (FWM) noise, stimulated by spontaneous Raman scattering, prevented the preservation of non-classical photon statistics during read-out. Suppressing this source of noise represents the last remaining challenge for realising a broadband single-photon Raman memory suitable for quantum information applications. To this end, I demonstrate a novel cavity implementation of the Raman memory which reduces the FWM contribution relative to the signal field by re-distributing the density of states into which the noise photons can be scattered. Cavity-enhanced memory operation was investigated using weak coherent input states, showing a significant improvement of the signal-to-noise ratio compared to the free-space memory implementation. This proof-of-principle demonstration suggests that cavity Raman memories may offer a practical route towards low-noise, high-bandwidth quantum storage at room temperature.
Since its inception, quantum information processing (QIP) has been branched into many new directions. As well as well-known applications such as teleportation and metrology, researchers are beginning to investigate interdisciplinary areas such as quantum machine learning. One of the interesting areas is where quantum information science meets stochastic modelling, from the field of complexity science. Recently, it has been shown theoretically that, for simulating classical systems, quantumassisted models and simulators are more efficient in terms of memory storage they require to do simulations, compared with classical computers. That is, for most systems, classical simulators demand an excessive amount of memory storage, while quantum simulators can do the same simulation with less memory. The main focus of this thesis is on experimental realisation of quantum simulators that are capable of simulating stochastic processes with a reduced amount of memory. To implement the (nearly) exact simulation of stochastic processes using quantum simulators, it is essential to have low-noise state preparation, robust unitary operations, and high-precision read-out. These requirements, and the flexibility and precision of photonic quantum optics, make photonics the ideal system for developing the science of this new quantum advantage and for making strides towards its technological realisation. In the context of stochastic simulation, I have experimentally studied three key problems that serve as stepping stones in advancing this new field. In the first experiment, an error-tolerant quantum simulator was designed, and realised to simulate a 1D Ising spin chain, using internal states that store less information than the corresponding classical approach. Furthermore, an interesting and fundamental phenomenon named the ambiguity of simplicity is witnessed. This is the inconsistency that we observe in the order of relative complexity of two systems when we change the simulators from classical to quantum. In the second experiment, a quantum simulator was built that can simulate classical processes for more than one step of the simulation at a time, storing the information from multiple steps coherently. In the third experiment, a new type of quantum memory advantage, which is based on the dimensionality of the memory register, rather than on information entropy measure, is demonstrated. This advantage is realisable in a single simulator, in contrast to previous works. Realising the dimensionality memory advantage in practical applications does not rely on running multiple simulators in parallel.In the field of optical QIP, realising an ideal single-photon source has been a longstanding challenge. In another part of my PhD, I have worked on a source that aims to tackle some of the existing issues in this context. We built a source of high-quality entangled photons with a high heralding efficiency, which has the potential to be used in multi-photon experiments. This source was also essential to demonstrate a fundamental task in quantum non-locality, one-way steering, which was performed conclusively for the first time.
Single photons are a vital resource for optical quantum information processing. Efficient and deterministic single photon sources do not yet exist, however. To date, experimental demonstrations of quantum processing primitives have been implemented using non-deterministic sources combined with heralding and/or postselection. Unfortunately, even for eight photons, the data rates are already so low as to make most experiments impracticable. It is well known that quantum memories, capable of storing photons until they are needed, are a potential solution to this `scaling catastrophe'. Here, we analyze in detail the benefits of quantum memories for producing multiphoton states, showing how the production rates can be enhanced by many orders of magnitude. We identify the quantity etaBeta BetaB as the most important figure of merit in this connection, where etaetaeta and BBB are the efficiency and time-bandwidth product of the memories, respectively. We go on to review our progress in implementing the most broadband memory to date, with B<1000B<1000B<1000, in room-temperature cesium vapour. We consider the noise properties for single photon storage and the integration of the memory using waveguides.