Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

RF Infrastructure for DC-Controlled Josephson Phased Arrays in the Ka-Band

Ilan Kurtser, Eldad Holdengreber, S. E. Schacham, Eliyahu Farber

Published Jan 1, 2026• 0 citations
Publisher

Abstract

Modern cryogenic phased arrays require low-loss beam-steering mechanisms, but conventional RF phase shifters introduce insertion loss and thermal-management challenges at cryogenic temperatures. High-temperature superconducting (HTSC) Josephson junctions offer a promising alternative through their DC-tunable Josephson inductance. However, a practical RF architecture that connects reproducible junction fabrication with system-level phased-array implementation remains insufficiently developed. This work proposes a fabrication-compatible 28 GHz cryogenic phased-array architecture developed around the graphoepitaxial step-edge Josephson junction technology introduced by Faley and co-workers at Forschungszentrum Jülich. The proposed 2 × 2 array integrates planar spiral radiators, optimized junction-to-antenna transitions that mitigate the impedance discontinuity between microscopic junction regions and macroscopic antenna elements, with high-impedance RF chokes that enable independent DC-bias routing. The complete RF/DC architecture supports main-beam steering of up to 20° under representative phase distributions imposed directly at the RF ports. These results establish a system-level engineering framework that links an established HTSC step-edge junction fabrication platform with scalable superconducting phased arrays and provides a basis for future fabrication and experimental validation.

DOI
10.1109/tasc.2026.3740349

Related papers

DC-operated Josephson junction arrays as a cryogenic on-chip microwave measurement platform

Senne Vervoort, Lukas Nulens, Davi A. D. Chaves +8 more

Abstract Providing radio frequency (RF) signals to cryogenic circuits requires bulky and expensive cabling interfacing specialized RF electronics at room temperature. Superconducting-normal metal-superconducting Josephson junction arrays (JJAs) can change this paradigm by placing the RF source and detector on-chip. In this work, we demonstrate that DC-biased JJAs can emit signals in the C-band frequency spectrum and beyond, with a minimal linewidth of 106.5 ± 0.1 MHz and maximum power of 11.9 fW. We fabricate JJAs comprised of amorphous MoGe or NbTiN superconducting islands and metallic Au weak links. Temperature, magnetic field, applied current, and device design are explored to control the RF sources, while we identify important features that affect the ideal source behavior. Combined with the ability of these JJAs to detect microwave radiation, these sources allow us to propose a fully DC-operated cryogenic on-chip measurement platform that is an alternative to the high-frequency circuitry currently required for quantum applications.

arXiv:2412.17576•Communications Physics•Jul 12, 2025•4 citations

High Temperature Superconducting Josephson Junction Array Systems Phase 1

J. Martens, A. Pance, K. Char +2 more

High temperature superconducting Josephson arrays were investigated as possible millimeter wave sources. A junction technology was selected and improved to the point where radiation, near 1 microwatt off-chip, was measured from a variety of 2-dimensional arrays in the 70-160 GHz range. The arrays were tunable and were successfully coupled to a number of antennas for broadband, tunable transmission. Antennas for a variety of specific applications were selected on the basis of bandwidth requirements, impedance levels, polarization, and the possibility of sufficient monolithic integration. The final part of the program was a study of potential subsystems that would utilize these arrays. Interchip communications transceivers were studied and interchip coupling was demonstrated using two antenna-coupled arrays. The most promising application may be a monolithic clock source, near 100 GHz, for communications and signal processing systems. Josephson arrays, mm-wave sources.

Final Report•Jan 25, 1994•0 citations

High temperature superconducting Josephson Junction array systems. Phase 1. Final report, 1 July-31 December 1993

J. Martens, A. Pance, K. Char +2 more

High temperature superconducting Josephson arrays were investigated as possible millimeter wave sources. A junction technology was selected and improved to the point where radiation, near 1 microwatt off-chip, was measured from a variety of 2-dimensional arrays in the 70-160 GHz range. The arrays were tunable and were successfully coupled to a number of antennas for broadband, tunable transmission. Antennas for a variety of specific applications were selected on the basis of bandwidth requirements, impedance levels, polarization, and the possibility of sufficient monolithic integration. The final part of the program was a study of potential subsystems that would utilize these arrays. Interchip communications transceivers were studied and interchip coupling was demonstrated using two antenna-coupled arrays. The most promising application may be a monolithic clock source, near 100 GHz, for communications and signal processing systems.

•Jan 25, 1994•0 citations

Central Frequency/Wideband Quasioptical Josephson Oscillator Arrays

A. Pance, G. Pance, Michael J. Wengler

In this paper we present new design of quasioptical Josephson oscillators: the Central Frequency/ Wideband design. In this design, tuning structures composed of inductances, radial stubs and quarter wave transformers are integrated with every junction of the array in order to tune out the junction capacitance and match the junction impedance to the antenna impedance for the efficient output power coupling. Each junction feeds an antenna and power from individual junctions is quasioptically combined. We present a variation of the design where a sub-array replaces every single junction of the array. Preliminary results for the array designed for 98 GHz fundamental frequency and fabricated in Hypres NIVA10xThth technology are presented. Introduction In recent years there has been a growing effort within the superconducting research community to develop oscillators based on Josephson junction arrays. Submillimeter Josephson arrays with power levels of the order of 11,1W have been made at Stony Brook [1] and NIST [2]. Two-dimensional array of parallel biased Josephson junctions coupled to small antennas with quasioptically combined output power has been proposed as a promising approach for achieving larger power levels and reasonable radiation linewidths [3]. It has been shown that the performance of these arrays would critically depend on the way the Josephson junctions' capacitances are tuned out [4]. We have proposed arrays with microstrip tuning structures integrated with every junction as potentially the best solution RI Because of inherent frequency limitations of tuning circuits, these arrays are designed for one central frequency with the requirement of as large bandwidth as possible. This design will be referred to as the Central Frequency/Wideband (CFW) Design. Here we describe the basic CFW design and one of its modifications, and present preliminary results obtained from arrays fabricated in NIVA10x/Nb technology. Generic CFW array design The generic CFW design is presented in Figure 1. MS2 is a very short length transmission line whose inductance tunes out the junction capacitance. A radial stub at the end of MS2 serves as the broadband short. MS1 is the quarter wave transformer that matches the junction impedance to the antenna impedance. That way, all of the rf power produced by the junction is coupled to the * Present address: Conductus, Inc., 969 West Maude Ave, Sunnyvale, CA 94086 Page 478 Fourth International Symposium on Space Terahertz Technology antenna and radiated in the broadside direction. This design has successfully been used in SIS mixers [5] (see elsewhere in this issue). A detailed account of this and other applicable designs of tuning elements can be found in [6]. We have designed 492 GHz CFW arrays for the following parameters: critical current density je = 4000 A/cm, junction capacitance Cj = 60 fF/pm and junction area A = 71= . The impedance of the log-periodic antenna is around 79 on silicon substrate and is independent of frequency in the designed frequency range. Since there is a basic trade-off between the coupling and the bandwidth, careful design of the tuning elements provides a predicted bandwidth of 80 GHz with 75% power coupling at the central frequency of 492 GHz (Figure 2). The design of the tuning structure is performed in Touchstone [7] with effects of the superconducting kinetic inductance accounted for. The tuning element design values are: Z i = 18 CI, 1 1 = 62.5 pm (MS 1) and 12 = 3.5 pm, Z2 = 15 CI (MS2). The 360 junction array is predicted to deliver 2011W of RF power at 492 GHz. A dramatic increase in performance, in terms of both the bandwidth and the coupling is possible with advanced sub-micron and high current density fabrication processes. Figure 3 shows the fabricated 492 GHz array. It employs 360 log-periodic antennas on a chip 6 mm X 6 mm in size, with integrated tuning structures on one arm of the antenna. All junctions are DC biased in parallel. The array periods are dx = 240 gm, dy = 264 gm. Unfortunately, this fabrication run did not yield working devices because of the minor problem during fabrication. New fabrication runs should be performed in the near future. Antenna-coupled lumped array A ready extension of the generic CFW design can be made for arrays at relatively smaller frequencies. Single junction can be replaced by a lumped parallel sub-array of junctions in order to increase the output power. The overall size of the sub-array must be much smaller than the wavelength at the desired operation frequency. Usual tuning structures can be used to tune out the capacitance of the sub-array and to transform the small impedance of the sub-an-ay to the large antenna impedance. If an is composed of several antennas and sub-arrays biased in parallel, the power from different sub-arrays would be quasioptically combined. Figure 4a shows a single sub-array fabricated in Nb/A10x/Nb technology at Hypres, Inc. A compact parallel array of 64 Josephson junctions is placed on one arm of logperiodic antenna on a silicon substrate (Figure 4b). A microstrip transmission line is used as a coupling structure between the sub-array and the antenna. Its electrical length is somewhat bigger than 90° so that the excess portion tunes out the big capacitance of the sub-array and the 90° portion serves as an impedance transformer. Although the bandwidth of this design is rather narrow, it has a nice feature that it works not only at the designed frequency fo, but at a set of frequencies approximately given by the sequence fo, 3f0, 5fo, ...(2k4) f0. (1) Array from Fig. 4 was designed for the fundamental frequency of fo = 98 GHz. The fabrication process parameters were jc=983A/cm 2 , q=38fF/pm , A=12.2 gm , RN=16.4 11. In order to increase the available power, we have placed identical microstrip-coupled sub-array on the opposite arm of the antenna. The two sub-arrays feed the antenna in parallel. The schematic of the electrical circuit is given in Figure 5. The microstrip line was designed with impedance of Z=1.42 S2 and electrical length of 93° at 98 GHz. The measured dc I-V curve of the whole array reveals a series of seven resonant peaks (Figure 6a). A small amount of DC magnetic field was applied Fourth International Symposium on Space Terahertz Technology Page 479 along the chip surface to enhance the resonances. When no magnetic field is applied (Figure 6.b) one of the steps (5 counted from Vdc=0) has disappeared. The visible critical current (1.25mA , Fig. 6b) is much smaller than about 15mA expected from the size of the quasiparticle current rise at the gap voltage, which we attribute to noise. The approximate frequencies of resonant peaks are inferred from the I-V curve and are given in Table 1 below. Resonant step # Frequency [GI-14 81 2 129 3 210 4 243 5 356 6 405 7 518 Table 1. Resonant steps from the I-V curve (Figure 6) of the array in Figure 4. The first step is at the fundamental frequency fo = 81 GHz and is down-shifted from the designed 98 GHz value because of the slight discrepancy between the designed and obtained fabrication parameters. Steps #4 and #6 correspond to higher oscillator modes given by k=2 and k=3 (1). At these three frequencies, the two sub-arrays work coherently supplying the RF power to the antenna. The remaining resonant peaks roughly correspond to the sequence of modes with f0 resonant frequencies (2j-1) —2-, where j = 2, 3, 5 and 6 for the steps #2, #3, #5 and #7, respectively. In these modes, one sub-array supplies the RF power to the other sub-array, and practically no power is radiated through the antenna. From the size of the resonant steps in the oscillator modes we estimate that the available RF power is less than a RW. The experiments for coupling the array radiation to the off-chip SIS detector are in progress . For radiated power in the range ofp,W, a two-dimensional array of parallel biased antenna/sub-arrays should be employed. Discussion and Summary We have presented a new Central Frequency/Wideband design of quasioptical Josephson arrays that effectively deals with the parasitic junction capacitances. Because of the independent tuning of individual junction capacitances, CFW oscillators would tolerate large scattering in process parameters. Further, because of impedance matching between the junctions and the antennas, these arrays would be very efficient sources. The major disadvantage of the CFA' design is the size of the unit cell, i.e. much smaller number of junctions can be utilized per given array area, compared to compact 2-D arrays. This disadvantage is offset by the array efficiency. First fabricated arrays show evidence of likely coherent array operation at a set of frequencies. The design promises Josephson submillimeter oscillators of unprecedented performance. Page 480 Fourth International Symposium on Space Terahertz Technology Acknowledgments We are pleased to acknowledge Hypres, Inc. for the fabrication of the antenna-coupled lumped-array oscillator. This work was supported by the Air Force Office of Scientific Research grant AFOSR-90-0233. Gordana Pance was partially supported by the IEEE Microwave Theory and Techniques Society Graduate Fellowship.

•Apr 1, 1993•0 citations

Tuning Y–Ba–Cu–O Focused Helium Ion Beam Josephson Junctions for Use as THz Mixers

Anthony Cortez, Ethan Y. Cho, Hao Li +3 more

We present Josephson junctions fabricated from high transition temperature superconductor YBa2Cu3O7coupled to spiral THz antennas. The fabrication process involves creating a Josephson junction at the center of a superconducting bridge embedded into a THz spiral antenna using irradiation from a focused helium ion beam. For low doses of helium irradiation, the junctions have metallic barriers and operate at temperatures as high as 67 K. For higher doses of irradiation, insulator barriers are created. These devices have higher resistance but require cooling to lower temperatures (~10 K) due to smaller critical currents. Through optimization of the dose and by trimming the width of the junctions, we have created high resistance devices to improve the impedance match to a spiral antenna. Under 90-GHz radiation, we observe up to 17 Shapiro steps in the I-V curve out to approximately 3 mV at a temperature of 10 K.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•13 citations

Low-Temperature Superconductor rf-SQUIDs-Based Fully Integrated Reflective-Type Analog Phase Shifter for Quantum Applications

Navjot K. Khaira, Tejinder Singh, Raafat R. Mansour

This article presents a low-temperature superconductor (LTS)-based microwave phase shifter. The device utilizes a superconducting hybrid coupler monolithically integrated with two tunable reflective loads. An array of radio frequency superconducting quantum interference devices (rf-SQUIDs) is used to achieve inductive tuning in reflective loads, resulting in a broadband true time delay phase shift. The rf-SQUIDs are current controlled using an on-chip dc bias circuitry. The proof-of-concept fabricated device provides excellent RF performance in the${X}$- and Ku -band with a phase shift of 49° at 10 GHz and 67° at 15 GHz. The insertion loss is < 1.5 dB for the entire range from 8 to 18 GHz. The methods to further improve the obtained phase shift are discussed. The overall device has a chip footprint of 0.6 mm2 and is fabricated using MIT-Lincoln Lab (MIT-LL) SFQ5ee eight-layer Niobium (Nb)-based superconducting fabrication process.

IEEE Transactions on Microwave Theory and Techniques•Nov 24, 2022•9 citations
Modern cryogenic phased arrays require low-loss beam-steering mechanisms, but conventional RF phase shifters introduce insertion loss and thermal-management challenges at cryogenic temperatures. High-temperature superconducting (HTSC) Josephson junctions offer a promising alternative through their DC-tunable Josephson inductance. However, a practical RF architecture that connects reproducible junction fabrication with system-level phased-array implementation remains insufficiently developed. This work proposes a fabrication-compatible 28 GHz cryogenic phased-array architecture developed around the graphoepitaxial step-edge Josephson junction technology introduced by Faley and co-workers at Forschungszentrum Jülich. The proposed 2 × 2 array integrates planar spiral radiators, optimized junction-to-antenna transitions that mitigate the impedance discontinuity between microscopic junction regions and macroscopic antenna elements, with high-impedance RF chokes that enable independent DC-bias routing. The complete RF/DC architecture supports main-beam steering of up to 20° under representative phase distributions imposed directly at the RF ports. These results establish a system-level engineering framework that links an established HTSC step-edge junction fabrication platform with scalable superconducting phased arrays and provides a basis for future fabrication and experimental validation.
Abstract Providing radio frequency (RF) signals to cryogenic circuits requires bulky and expensive cabling interfacing specialized RF electronics at room temperature. Superconducting-normal metal-superconducting Josephson junction arrays (JJAs) can change this paradigm by placing the RF source and detector on-chip. In this work, we demonstrate that DC-biased JJAs can emit signals in the C-band frequency spectrum and beyond, with a minimal linewidth of 106.5 ± 0.1 MHz and maximum power of 11.9 fW. We fabricate JJAs comprised of amorphous MoGe or NbTiN superconducting islands and metallic Au weak links. Temperature, magnetic field, applied current, and device design are explored to control the RF sources, while we identify important features that affect the ideal source behavior. Combined with the ability of these JJAs to detect microwave radiation, these sources allow us to propose a fully DC-operated cryogenic on-chip measurement platform that is an alternative to the high-frequency circuitry currently required for quantum applications.
High temperature superconducting Josephson arrays were investigated as possible millimeter wave sources. A junction technology was selected and improved to the point where radiation, near 1 microwatt off-chip, was measured from a variety of 2-dimensional arrays in the 70-160 GHz range. The arrays were tunable and were successfully coupled to a number of antennas for broadband, tunable transmission. Antennas for a variety of specific applications were selected on the basis of bandwidth requirements, impedance levels, polarization, and the possibility of sufficient monolithic integration. The final part of the program was a study of potential subsystems that would utilize these arrays. Interchip communications transceivers were studied and interchip coupling was demonstrated using two antenna-coupled arrays. The most promising application may be a monolithic clock source, near 100 GHz, for communications and signal processing systems. Josephson arrays, mm-wave sources.
High temperature superconducting Josephson arrays were investigated as possible millimeter wave sources. A junction technology was selected and improved to the point where radiation, near 1 microwatt off-chip, was measured from a variety of 2-dimensional arrays in the 70-160 GHz range. The arrays were tunable and were successfully coupled to a number of antennas for broadband, tunable transmission. Antennas for a variety of specific applications were selected on the basis of bandwidth requirements, impedance levels, polarization, and the possibility of sufficient monolithic integration. The final part of the program was a study of potential subsystems that would utilize these arrays. Interchip communications transceivers were studied and interchip coupling was demonstrated using two antenna-coupled arrays. The most promising application may be a monolithic clock source, near 100 GHz, for communications and signal processing systems.
In this paper we present new design of quasioptical Josephson oscillators: the Central Frequency/ Wideband design. In this design, tuning structures composed of inductances, radial stubs and quarter wave transformers are integrated with every junction of the array in order to tune out the junction capacitance and match the junction impedance to the antenna impedance for the efficient output power coupling. Each junction feeds an antenna and power from individual junctions is quasioptically combined. We present a variation of the design where a sub-array replaces every single junction of the array. Preliminary results for the array designed for 98 GHz fundamental frequency and fabricated in Hypres NIVA10xThth technology are presented. Introduction In recent years there has been a growing effort within the superconducting research community to develop oscillators based on Josephson junction arrays. Submillimeter Josephson arrays with power levels of the order of 11,1W have been made at Stony Brook [1] and NIST [2]. Two-dimensional array of parallel biased Josephson junctions coupled to small antennas with quasioptically combined output power has been proposed as a promising approach for achieving larger power levels and reasonable radiation linewidths [3]. It has been shown that the performance of these arrays would critically depend on the way the Josephson junctions' capacitances are tuned out [4]. We have proposed arrays with microstrip tuning structures integrated with every junction as potentially the best solution RI Because of inherent frequency limitations of tuning circuits, these arrays are designed for one central frequency with the requirement of as large bandwidth as possible. This design will be referred to as the Central Frequency/Wideband (CFW) Design. Here we describe the basic CFW design and one of its modifications, and present preliminary results obtained from arrays fabricated in NIVA10x/Nb technology. Generic CFW array design The generic CFW design is presented in Figure 1. MS2 is a very short length transmission line whose inductance tunes out the junction capacitance. A radial stub at the end of MS2 serves as the broadband short. MS1 is the quarter wave transformer that matches the junction impedance to the antenna impedance. That way, all of the rf power produced by the junction is coupled to the * Present address: Conductus, Inc., 969 West Maude Ave, Sunnyvale, CA 94086 Page 478 Fourth International Symposium on Space Terahertz Technology antenna and radiated in the broadside direction. This design has successfully been used in SIS mixers [5] (see elsewhere in this issue). A detailed account of this and other applicable designs of tuning elements can be found in [6]. We have designed 492 GHz CFW arrays for the following parameters: critical current density je = 4000 A/cm, junction capacitance Cj = 60 fF/pm and junction area A = 71= . The impedance of the log-periodic antenna is around 79 on silicon substrate and is independent of frequency in the designed frequency range. Since there is a basic trade-off between the coupling and the bandwidth, careful design of the tuning elements provides a predicted bandwidth of 80 GHz with 75% power coupling at the central frequency of 492 GHz (Figure 2). The design of the tuning structure is performed in Touchstone [7] with effects of the superconducting kinetic inductance accounted for. The tuning element design values are: Z i = 18 CI, 1 1 = 62.5 pm (MS 1) and 12 = 3.5 pm, Z2 = 15 CI (MS2). The 360 junction array is predicted to deliver 2011W of RF power at 492 GHz. A dramatic increase in performance, in terms of both the bandwidth and the coupling is possible with advanced sub-micron and high current density fabrication processes. Figure 3 shows the fabricated 492 GHz array. It employs 360 log-periodic antennas on a chip 6 mm X 6 mm in size, with integrated tuning structures on one arm of the antenna. All junctions are DC biased in parallel. The array periods are dx = 240 gm, dy = 264 gm. Unfortunately, this fabrication run did not yield working devices because of the minor problem during fabrication. New fabrication runs should be performed in the near future. Antenna-coupled lumped array A ready extension of the generic CFW design can be made for arrays at relatively smaller frequencies. Single junction can be replaced by a lumped parallel sub-array of junctions in order to increase the output power. The overall size of the sub-array must be much smaller than the wavelength at the desired operation frequency. Usual tuning structures can be used to tune out the capacitance of the sub-array and to transform the small impedance of the sub-an-ay to the large antenna impedance. If an is composed of several antennas and sub-arrays biased in parallel, the power from different sub-arrays would be quasioptically combined. Figure 4a shows a single sub-array fabricated in Nb/A10x/Nb technology at Hypres, Inc. A compact parallel array of 64 Josephson junctions is placed on one arm of logperiodic antenna on a silicon substrate (Figure 4b). A microstrip transmission line is used as a coupling structure between the sub-array and the antenna. Its electrical length is somewhat bigger than 90° so that the excess portion tunes out the big capacitance of the sub-array and the 90° portion serves as an impedance transformer. Although the bandwidth of this design is rather narrow, it has a nice feature that it works not only at the designed frequency fo, but at a set of frequencies approximately given by the sequence fo, 3f0, 5fo, ...(2k4) f0. (1) Array from Fig. 4 was designed for the fundamental frequency of fo = 98 GHz. The fabrication process parameters were jc=983A/cm 2 , q=38fF/pm , A=12.2 gm , RN=16.4 11. In order to increase the available power, we have placed identical microstrip-coupled sub-array on the opposite arm of the antenna. The two sub-arrays feed the antenna in parallel. The schematic of the electrical circuit is given in Figure 5. The microstrip line was designed with impedance of Z=1.42 S2 and electrical length of 93° at 98 GHz. The measured dc I-V curve of the whole array reveals a series of seven resonant peaks (Figure 6a). A small amount of DC magnetic field was applied Fourth International Symposium on Space Terahertz Technology Page 479 along the chip surface to enhance the resonances. When no magnetic field is applied (Figure 6.b) one of the steps (5 counted from Vdc=0) has disappeared. The visible critical current (1.25mA , Fig. 6b) is much smaller than about 15mA expected from the size of the quasiparticle current rise at the gap voltage, which we attribute to noise. The approximate frequencies of resonant peaks are inferred from the I-V curve and are given in Table 1 below. Resonant step # Frequency [GI-14 81 2 129 3 210 4 243 5 356 6 405 7 518 Table 1. Resonant steps from the I-V curve (Figure 6) of the array in Figure 4. The first step is at the fundamental frequency fo = 81 GHz and is down-shifted from the designed 98 GHz value because of the slight discrepancy between the designed and obtained fabrication parameters. Steps #4 and #6 correspond to higher oscillator modes given by k=2 and k=3 (1). At these three frequencies, the two sub-arrays work coherently supplying the RF power to the antenna. The remaining resonant peaks roughly correspond to the sequence of modes with f0 resonant frequencies (2j-1) —2-, where j = 2, 3, 5 and 6 for the steps #2, #3, #5 and #7, respectively. In these modes, one sub-array supplies the RF power to the other sub-array, and practically no power is radiated through the antenna. From the size of the resonant steps in the oscillator modes we estimate that the available RF power is less than a RW. The experiments for coupling the array radiation to the off-chip SIS detector are in progress . For radiated power in the range ofp,W, a two-dimensional array of parallel biased antenna/sub-arrays should be employed. Discussion and Summary We have presented a new Central Frequency/Wideband design of quasioptical Josephson arrays that effectively deals with the parasitic junction capacitances. Because of the independent tuning of individual junction capacitances, CFW oscillators would tolerate large scattering in process parameters. Further, because of impedance matching between the junctions and the antennas, these arrays would be very efficient sources. The major disadvantage of the CFA' design is the size of the unit cell, i.e. much smaller number of junctions can be utilized per given array area, compared to compact 2-D arrays. This disadvantage is offset by the array efficiency. First fabricated arrays show evidence of likely coherent array operation at a set of frequencies. The design promises Josephson submillimeter oscillators of unprecedented performance. Page 480 Fourth International Symposium on Space Terahertz Technology Acknowledgments We are pleased to acknowledge Hypres, Inc. for the fabrication of the antenna-coupled lumped-array oscillator. This work was supported by the Air Force Office of Scientific Research grant AFOSR-90-0233. Gordana Pance was partially supported by the IEEE Microwave Theory and Techniques Society Graduate Fellowship.
We present Josephson junctions fabricated from high transition temperature superconductor YBa2Cu3O7coupled to spiral THz antennas. The fabrication process involves creating a Josephson junction at the center of a superconducting bridge embedded into a THz spiral antenna using irradiation from a focused helium ion beam. For low doses of helium irradiation, the junctions have metallic barriers and operate at temperatures as high as 67 K. For higher doses of irradiation, insulator barriers are created. These devices have higher resistance but require cooling to lower temperatures (~10 K) due to smaller critical currents. Through optimization of the dose and by trimming the width of the junctions, we have created high resistance devices to improve the impedance match to a spiral antenna. Under 90-GHz radiation, we observe up to 17 Shapiro steps in the I-V curve out to approximately 3 mV at a temperature of 10 K.
This article presents a low-temperature superconductor (LTS)-based microwave phase shifter. The device utilizes a superconducting hybrid coupler monolithically integrated with two tunable reflective loads. An array of radio frequency superconducting quantum interference devices (rf-SQUIDs) is used to achieve inductive tuning in reflective loads, resulting in a broadband true time delay phase shift. The rf-SQUIDs are current controlled using an on-chip dc bias circuitry. The proof-of-concept fabricated device provides excellent RF performance in theX{X}X- and Ku -band with a phase shift of 49° at 10 GHz and 67° at 15 GHz. The insertion loss is < 1.5 dB for the entire range from 8 to 18 GHz. The methods to further improve the obtained phase shift are discussed. The overall device has a chip footprint of 0.6 mm2 and is fabricated using MIT-Lincoln Lab (MIT-LL) SFQ5ee eight-layer Niobium (Nb)-based superconducting fabrication process.