The reliability and long-term stability of Earth Observation (EO) data products depend fundamentally on the accurate calibration of optical and infrared detectors. Current spaceborne radiometers, spectrometers, and imaging payloads rely on onboard blackbody sources, sun diffusers, deep space calibration port and ground-based reference targets. Although these techniques are mature, they remain limited by ageing effects and degradation, contamination, spectral non-uniformity, and the absence of true absolute traceability. These limitations impact climate data records, the reliability and stability of the data, the performances and quality of the products, inter-mission consistency, and the ability to meet increasingly stringent scientific and user requirements in domains such as environmental monitoring, atmospheric composition, disaster management, and climate services. The QUASAR concept proposes a quantum-based on-board calibration architecture that derives detector efficiency from fundamental photon pair correlations. By exploiting the absolute properties of quantum states, this approach removes the dependence on external radiometric reference standards and enables intrinsically traceable, self-contained, and highly stable in-flight calibration. The study investigates the feasibility of implementing a compact quantum optical source within EO payloads, with the objective of providing real-time, absolute calibration of Charge-Coupled Device, Complementary Metal-Oxide-Semiconductor, and Single-Photon Avalanche Diode-array detectors across the visible to short-wave infrared spectrum. The work presented assesses QUASAR as an integrated application that links advanced quantum technologies with the operational needs of EO user communities. The study addresses four dimensions essential to end-to-end solution development: 1. Scientific relevance, by identifying EO application sectors where improved calibration stability directly enhances societal and environmental decision-making; 2. Future potential, by quantifying performance improvements relative to current techniques and evaluating benefits for users who depend on long-term climate records and high-precision retrievals; 3. Feasibility, through architectural and engineering analyses that consider mass, power, thermal stability, and optical integration constraints for space deployment; 4. Strategic alignment, by situating the concept within the broader service value chain that supports climate services, environmental monitoring, and policy-driven EO programmes. By introducing an absolute radiometric reference that is independent of ageing and external targets, QUASAR has the potential to reinforce the robustness and societal impact of EO applications that rely on continuous, high-quality and stable data streams. The concept represents a cross-disciplinary pathfinder that bridges quantum technology, space engineering, and user-driven climate services, and offers a promising avenue for future integrated EO systems. The study is conducted as part of an activity funded by the European Space Agency and carried out in collaboration between INRIM, Starion Italia S.p.A., ASTRO S.r.l., and Politecnico di Torino.
The reliability and long-term stability of Earth Observation (EO) data products depend fundamentally on the accurate calibration of optical and infrared detectors. Current spaceborne radiometers, spectrometers, and imaging payloads rely on onboard blackbody sources, sun diffusers, deep space calibration port and ground-based reference targets. Although these techniques are mature, they remain limited by ageing effects and degradation, contamination, spectral non-uniformity, and the absence of true absolute traceability. These limitations impact climate data records, the reliability and stability of the data, the performances and quality of the products, inter-mission consistency, and the ability to meet increasingly stringent scientific and user requirements in domains such as environmental monitoring, atmospheric composition, disaster management, and climate services. The QUASAR concept proposes a quantum-based on-board calibration architecture that derives detector efficiency from fundamental photon pair correlations. By exploiting the absolute properties of quantum states, this approach removes the dependence on external radiometric reference standards and enables intrinsically traceable, self-contained, and highly stable in-flight calibration. The study investigates the feasibility of implementing a compact quantum optical source within EO payloads, with the objective of providing real-time, absolute calibration of Charge-Coupled Device, Complementary Metal-Oxide-Semiconductor, and Single-Photon Avalanche Diode-array detectors across the visible to short-wave infrared spectrum. The work presented assesses QUASAR as an integrated application that links advanced quantum technologies with the operational needs of EO user communities. The study addresses four dimensions essential to end-to-end solution development: 1. Scientific relevance, by identifying EO application sectors where improved calibration stability directly enhances societal and environmental decision-making; 2. Future potential, by quantifying performance improvements relative to current techniques and evaluating benefits for users who depend on long-term climate records and high-precision retrievals; 3. Feasibility, through architectural and engineering analyses that consider mass, power, thermal stability, and optical integration constraints for space deployment; 4. Strategic alignment, by situating the concept within the broader service value chain that supports climate services, environmental monitoring, and policy-driven EO programmes. By introducing an absolute radiometric reference that is independent of ageing and external targets, QUASAR has the potential to reinforce the robustness and societal impact of EO applications that rely on continuous, high-quality and stable data streams. The concept represents a cross-disciplinary pathfinder that bridges quantum technology, space engineering, and user-driven climate services, and offers a promising avenue for future integrated EO systems. The study is conducted as part of an activity funded by the European Space Agency and carried out in collaboration between INRIM, Starion Italia S.p.A., ASTRO S.r.l., and Politecnico di Torino.
Quantum sensing has emerged as a promising approach for spaceborne Earth Observation (EO) with the potential to offer higher accuracy, sensitivity and stability than instruments used in EO missions so far. While several quantum sensors have been developed and successfully tested in ground-based experiments, with some of them even available as commercial devices, the identification of their potential applications in space remains a challenge. Nevertheless, there are some promising technologies, including cold-atom interferometers, Rydberg receivers, atomic vapor- and Nitrogen-Vacancy center-based magnetometers, and quantum lidar, that show potential for enhancing EO capabilities. In this presentation, we will discuss the latest developments and challenges in quantum sensing for EO at the European Space Agency (ESA), highlighting the most promising technologies and their potential applications. We will also discuss ongoing efforts at ESA to identify potential applications of these sensors and the roadmap for their deployment. Finally, we will conclude with a discussion of the future prospects for quantum sensing in EO and the wider space exploration domain.
Optical quantum computing, as well as sensing technology based on quantum correlations are in preparation. These require photodiodes with close to perfect quantum efficiency for the detection of about 10^16 to 10^18 photons per second. Already the radiometric calibration is a challenge. Here, we provide the proof of concept of the quantum radiometric calibration (QRC) method, which is based on Heisenberg's uncertainty principle, derive the formula for its precision, and exclude the potential sources of systematic error. As an example, we calibrate a pair of the most efficient commercial photodiode at 1550 nm to the previously unknown system detection efficiency of (97.20 +/- 0.37)% using 10-dB-squeezed vacuum states. This value is unexpectedly low, too low for planned gravitational wave detectors and for continuous-variable optical quantum computing. With further improved precision, our work opens up the second true end-user application of the advantage provided by quantum correlations.
Globally, space agencies actively evaluate quantum sensing for its practical applications in space-based Earth Observation (EO), focusing on how it can improve accuracy, stability and enable new operational concepts. The near future looks promising for specific quantum technologies like Cold-Atom Interferometers (CAI), Rydberg Receivers (RR), and Nitrogen-Vacancy (NV) center-based magnetometers. These have the potential to enhance existing EO instrumentation in specific areas. A key task ahead is to identify and evaluate these potential improvements in the context of EO missions and to explore new observational concepts that may be enabled by these technologies. In our presentation, we will discuss the ongoing and planned activities in this area supported by the European Space Agency’s (ESA). This includes work on CAI for gravimetry, RRs in microwave radiometry, and NV center-based magnetometers for studying the Earth’s magnetosphere.
Quantum computing has introduced novel perspectives for tackling and improving machine learning tasks. Moreover, the integration of quantum technologies together with well-known deep learning (DL) architectures has emerged as a potential research trend gaining attraction across various domains, such as Earth Observation (EO) and many other research fields. However, prior related works in EO literature have mainly focused on convolutional architectural advancements, leaving several essential topics unexplored. Consequently, this research investigates through three cases of study fundamental aspects of hybrid quantum machine models for EO tasks aiming to provide a solid groundwork for future research studies towards more adequate simulations and looking at the post-NISQ era. More in detail, we firstly (1) investigate how different quantum libraries behave when training hybrid quantum models, assessing their computational efficiency and effectiveness. Secondly, (2) we analyze the stability/sensitivity to initialization values (i.e., seed values) in both traditional model and quantum-enhanced counterparts. Finally, (3) we explore the benefits of hybrid quantum attention-based models in EO applications, examining how integrating quantum circuits into ViTs can improve model performance.
Quantum technologies are moving from foundational science toward engineered systems in sensing and metrology, computing and simulation, communication and networking, and security. The transition is uneven in technological maturity: atomic clocks and several quantum sensors are operational; quantum key distribution has reached field deployment but remains constrained by integration, assurance and network architecture; post-quantum cryptography is entering standards-based migration; and general-purpose fault-tolerant quantum computing remains an engineering objective despite major progress in error correction. This treatise develops a mathematically grounded and application-oriented account of what quantum technologies are, what physical resources they exploit, what advantages have been proved or demonstrated, and where claims remain speculative. It distinguishes among scientific feasibility, engineering readiness, operational utility, economic value and societal legitimacy. Across fundamental physics, Earth and space sciences, environmental monitoring, health and life sciences, cybersecurity, critical infrastructure, hazards, defense, finance, decision support and AI-enabled systems, this work identifies bottlenecks and proposes a systems roadmap for robust, scalable, efficient, verifiable and responsible quantum-enabled capabilities.
Quantum computer deployment in space remains constrained by demanding hardware, environmental, and communications requirements. This paper reviews the opportunities and challenges of using quantum computing in space systems. It focuses on payload integration, radiation protection, quantum-memory stability, autonomous hybrid classical–quantum control, and quantum-network performance. The work is integrative, not novel in algorithms, architecture, optimization, or experiments. It organizes reviewed literature around system-level deployment barriers and highlights open research gaps. Compared with existing reviews, this paper adds a category taxonomy, a system-level constraint framing, updated coverage, and an integration of rate–loss fundamentals. The analysis highlights the need for standardized interfaces, autonomous classical–quantum control, and evolutionary qualification of subsystems in orbit. Modular, radiation-adaptive payloads and calibration-aware classical processing are identified as important strategies for improving reliability and mission resilience. The industrial outlook indicates a gradual transition from subsystem demonstrations toward standardized, interoperable, and vertically integrated quantum-communication services, including LEO QKD constellations, space-qualified protocol stacks, and CubeSat-scale photonic devices. Readiness claims are classified using a multi-stage ladder: launch, power-on, communication, calibration, quantum operation, and peer-reviewed useful computational performance. Fully fault-tolerant quantum computing in orbit remains a longer-term objective requiring advances in logical-qubit overhead, radiation tolerance, low-power control, memory performance, and repeater architectures.