Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Pushing the boundaries of Matrix Product States in quantum many-body physics and computing

Guglielmo Lami

Published Dec 18, 2023• 0 citations
OpenAlex

Abstract

The Thesis explores the application of Matrix Product States (MPS) in the domain of quantum many-body systems and quantum computing, show casing the versatility and effectiveness of MPS for addressing complex com putational challenges. The opening chapter introduces essential tools for Tensor Networks, addressing the curse of dimensionality and elucidating the main characteristics of Matrix Product States and Matrix Product Op erators. The discussion encompasses also important numerical techniques, including Density Matrix Renormalization Group and Time Evolving Block Decimation. Furthermore, the relation between MPS and quantum circuits is discussed. The subsequent Chapters delve into specific applications of MPS. In the second Chapter, we introduce a Tensor Network ansatz inspired by the backflow transformation for correlated systems. This extension of the MPS representation ensures an area law for entanglement in dimensions one or greater. We employ an optimization scheme combining DMRG and variational Monte Carlo algorithms for efficient ground-state search. Bench marking against spin models demonstrates high accuracy. The third Chapter explores quantum annealing for optimizing complex classical spin Hamil tonians, as the Hopfield model and the binary perceptron. We introduce an efficient Tensor Network representation for the adiabatic time evolution of quantum annealing, enabling scalable classical simulations. The use of MPS in mitigating Trotter errors and mapping to quantum circuits is also explored. In the fourth Chapter we present a novel method for evaluating the amount of nonstabilizerness (also known as quantum magic) contained in an MPS. We overcome the exponentially hard evaluation of this quan tity by employing a simple perfect sampling technique of Pauli string. Our innovative MPS approach enables efficient computation. Benchmarked on magic states and the quantum Ising chain ground state, this method offers easy access to the non-equilibrium dynamics of nonstabilizerness following a quantum quench. The Appendices provide additional insights, including: an introduction to variational Monte Carlo, technical details on MPS simula tions for the quantum annealing and a comprehensive overview on stabilizer formalism and nonstabilizerness.

Related papers

Tensor Network Techniques for Quantum Computation

Mario Collura, Guglielmo Lami, Nishan Ranabhat +1 more

This book serves as an introductory yet thorough guide to tensor networks and their applications in quantum computation and quantum information, designed for advanced undergraduate and graduate-level readers. In Part I, foundational topics are covered, including tensor structures and network representations like Matrix Product States (MPS) and Tree Tensor Networks (TTN). These preliminaries provide readers with the core mathematical tools and concepts necessary for quantum physics and quantum computing applications, bridging the gap between multi-linear algebra and complex quantum systems. Part II explores practical applications of tensor networks in simulating quantum dynamics, with a particular focus on the efficiency they offer for systems of high computational complexity. Key topics include Hamiltonian dynamics, quantum annealing, open system dynamics, and optimization strategies using TN frameworks. A final chapter addresses the emerging role of “quantum magic” in tensor networks. It delves into non-stabilizer states and their contribution to quantum computational power beyond classical simulability, featuring methods such as stabilizer-enhanced MPS and the Clifford-dressed TDVP. In presenting tensor networks as tools for understanding quantum complexity, this book aims to foster a deeper collaboration between the many-body physics and quantum computing communities, inviting a broader audience to engage with these recent developments.

arXiv:2503.04423•Dec 1, 2024•12 citations

Simulating quantum systems on classical computers with matrix product states

Adrian Kleine, Ulrich Schollwöck

In this thesis, the numerical simulation of strongly-interacting many-body quantum-mechanical systems using matrix product states (MPS) is considered. Compared to classical systems, quantum many-body systems possess an exponentially enlarged number of degrees of freedom, significantly complicating a simulation on a classical computer. Matrix-Product-States are a novel representation of arbitrary quantum many-body states. Using quantum information theory, it is possible to show that Matrix-Product-States provide a polynomial-sized representation of one-dimensional quantum systems, thus allowing an efficient simulation of one-dimensional quantum system on classical computers. Matrix-Product-States form the conceptual framework of the density-matrix renormalization group (DMRG). Based upon this connection, deeper understanding of the density matrix renormalization group can be obtained. After a general introduction in the first chapter of this thesis, the second chapter deals with Matrix-Product-States, focusing on the development of fast and stable algorithms. It is possible to extend the Matrix-Product-States approach to be able to represent arbitrary operators, the so-called Matrix-Product-Operators, which allows a fast and flexible calculation of arbitrary expectation values. To obtain algorithms to efficiently calculate groundstates, the density-matrix renormalization group is reformulated using the Matrix-Product-States framework. Further, time-dependent problems are considered. Two different algorithms are presented, one based on a Trotter decomposition of the time-evolution operator, the other one on Krylov subspaces. Finally, the evaluation of dynamical spectral functions is discussed, and a correction vector-based method is presented. In the following chapters, the methods presented in the second chapter, are applied to a number of different physical problems. The third chapter deals with the existence of chiral phases in isotropic one-dimensional quantum spin systems. A preceding analytical study based on a mean-field approach indicated the possible existence of those phases in an isotopic Heisenberg model with a frustrating zig-zag interaction and a magnetic field. In this thesis, the existence of the chiral phases will be shown numerically by using Matrix-Product-States-based algorithms. A key effect of interacting one-dimensional quantum-mechanical many-body systems is the spin-charge separation. However, up to now only signs of the spin-charge separation have been observed in experiments. In the fourth chapter, we propose an experiment using ultracold atomic gases in optical lattices, which allows a well controlled observation of the spin-charge separation (of different hyperfine states of the ultracold atoms) with current state of the art experimental techniques. Ultracold atoms in optical lattices are well described by (Bose)-Hubbard models. In order to support this proposal, we present numerical results for realistic system parameters. Matrix-Product-States are an excellent tool for the simulation of one-dimensional quantum systems, however, they are not well suited for the simulation of higher dimensional systems. For strongly-correlated systems, for instance cuprates-based high-temperature superconductors, quantum fluctuations play an essential role. Classical mean-field theories neglect any kind of fluctuations, thus they are not suitable to describe strongly-correlated systems. The dynamical mean-field theory (DMFT) fully takes local quantum fluctuations into account but neglects any kind of spatial fluctuations. The many-body problem on the lattice is mapped onto an impurity problem, which needs to be solved self-consistently. In the last chapter of this thesis, Matrix-Product-States-based algorithms are used to solve the impurity problem of the dynamical mean-field theory. We present results for a Hubbard model on a one-dimensional lattice and on a Bethe lattice obtained by the dynamical mean-field and compare them with exact results.

•Jan 1, 2010•1 citation

Who can compete with quantum computers? Lecture notes on quantum inspired tensor networks computational techniques

Xavier Waintal, Chen-How Huang, Christoph W. Groth

This is a set of lectures on tensor networks with a strong emphasis on the core algorithms involving Matrix Product States (MPS) and Matrix Product Operators (MPO). Compared to other presentations, particular care has been given to disentangle aspects of tensor networks from the quantum many-body problem: MPO/MPS algorithms are presented as a way to deal with linear algebra on extremely (exponentially) large matrices and vectors, regardless of any particular application. The lectures include well-known algorithms to find eigenvectors of MPOs (the celebrated DMRG), solve linear problems, and recent learning algorithms that allow one to map a known function into an MPS (the Tensor Cross Interpolation, or TCI, algorithm). The lectures end with a discussion of how to represent functions and perform calculus with tensor networks using the "quantics" representation. They include the detailed analytical construction of important MPOs such as those for differentiation, indefinite integration, convolution, and the quantum Fourier transform. Three concrete applications are discussed in detail: the simulation of a quantum computer (either exactly or with compression), the simulation of a quantum annealer, and techniques to solve partial differential equations (e.g. Poisson, diffusion, or Gross-Pitaevskii) within the "quantics" representation. The lectures have been designed to be accessible to a first-year PhD student and include detailed proofs of all statements.

quant-pharXiv:2601.03035•SciPost Physics Lecture Notes•Jan 7, 2026•17 citations

Tensor networks for the simulation of strongly correlated systems

Stefan Depenbrock

This thesis treats the classical simulation of strongly-interacting many-body quantum-mechanical systems in more than one dimension using matrix product states and the more general tensor product states. Contrary to classical systems, quantum many-body systems possess an exponentially larger number of degrees of freedom, thereby significantly complicating their numerical treatment on a classical computer. For this thesis two different representations of quantum many-body states were employed. The first, the so-called matrix product states (MPS) form the basis for the extremely successful density matrix renormalization group (DMRG) algorithm. While originally conceived for one-dimensional systems, MPS are in principle capable of describing arbitrary quantum many-body states. Using concepts from quantum information theory it is possible to show that MPS provide a representation of one-dimensional quantum systems that scales polynomially in the number of particles, therefore allowing an efficient simulation of one-dimensional systems on a classical computer. One of the key results of this thesis is that MPS representations are indeed efficient enough to describe even large systems in two dimensions, thereby enabling the simulation of such systems using DMRG. As a demonstration of the power of the DMRG algorithm, it is applied to the Heisenberg antiferromagnet with spin $S = 1/2$ on the kagome lattice. This model's ground state has long been under debate, with proposals ranging from static spin configurations to so-called quantum spin liquids, states where quantum fluctuations destroy conventional order and give rise to exotic quantum orders. Using a fully $SU(2)$-symmetric implementation allowed us to handle the exponential growth of entanglement and to perform a large-scale study of this system, finding the ground state for cylinders of up to 700 sites. Despite employing a one-dimensional algorithm for a two-dimensional system, we were able to compute the spin gap (i.e. the energy gap to the first spinful excitation) and study the ground state properties, such as the decay of correlation functions, the static spin structure factors, and the structure and distribution of the nearest-neighbor spin-spin correlations. Additionally, by applying a new tool from quantum information theory, the topological entanglement entropy, we could also with high confidence demonstrate the ground state of this model to be the elusive gapped $Z_2$ quantum spin liquid with topological order. To complement this study, we also considered the extension of MPS to higher dimensions, known as tensor product states (TPS). We implemented an optimization algorithm exploiting symmetries for this class of states and applied it to the bilinear-biquadratic-bicubic Heisenberg model with spin $S=3/2$ on the $z=3$ Bethe lattice. By carefully analyzing the simulation data we were able to determine the presence of both conventional and symmetry-protected topological order in this model, thereby demonstrating the analytically predicted existence of the Haldane phase in higher dimensions within an extended region of the phase diagram. Key properties of this symmetry-protected topological order include a doubling of the levels in the entanglement spectrum and the presence of edge spins, both of which were confirmed in our simulations. This finding simultaneously validated the applicability of the novel TPS algorithms to the search for exotic order.

•Jan 1, 2013•2 citations

Introduction to matrix-product states and tensor networks

Grégoire Misguich

These notes provide an introduction to tensor-network methods in quantum many-body physics, with an emphasis on matrix-product states (MPS). They develop the basic tensor-network language, including graphical notation, virtual indices, bond dimensions, gauge freedom, canonical forms, QR and singular-value decompositions, and the role of entanglement in controlling the efficiency of the representation. The main MPS algorithms are then introduced, including contractions, correlation functions, matrix-product operators, DMRG, and time-evolution methods. The notes also briefly discuss projected entangled-pair states (PEPS) as a higher-dimensional generalization of MPS, together with the basic ideas behind approximate PEPS contraction. Finally, tensor-network representations of mixed states, quantum channels, and Lindblad dynamics are presented, with applications to thermal states and open quantum systems. The presentation is accompanied by short Julia code examples based on ITensor, ITensorMPS, and TensorMixedStates. These notes were written for the 9th Les Houches Summer School on Computational Physics: Open Quantum Systems, held in June 2026.

cond-mat.str-elCross-listedarXiv:2606.24803•Jun 24, 2026•3 citations

Tensor network approaches: Ground states and dynamics in quantum many-body systems

Ho N. Phien

The study of interacting quantum many-body systems is one of the central challenges in modern physics. Interestingly, by understanding the physical properties of such systems from a microscopic description, one can explain many complex quantum phenomena such as the high-temperature superconductivity, fractional quantum Hall effect, etc. However, due to high complexity of these systems, theoretical investigations such as analytical and perturbation theories are limited to studying only a small subset of problems. In the past few decades, numerical simulation has emerged as an indispensable method for studying many phenomena, and has led to immense success and progress in recent years. The main obstacle in addressing quantum many-body systems is that the number of parameters required to represent a state of the system scales exponentially with the system size. However, one hardly needs the full Hilbert space but only a small subspace to describe physical properties of the system. From the point of view in quantum information theory, quantum entanglement is one of the main factors that is responsible for the complexity of studying quantum many-body systems. In particular, the amount of quantum entanglement in such system quantifies the correlation between constituents and therefore it determines how big the subspace is required to represent the system. In this thesis, we are interested in using tensor network states, a new emerging numerical technique to study dynamical and ground state properties of the system. The key ingredient is that a tensor network state which consists of a fairly small number of parameters can represent very well the complete wave function of a system. In one spatial dimension, Matrix Product State (MPS) has become a standard tool, combined with related algorithms such as Time Evolving Block Decimation algorithm (TEBD) to study dynamical properties of a locally-perturbed quantum lattice system. In this thesis, we introduce a technique called ``infinite boundary conditions'' that allows us to use a finite-size MPS to represent the state of an infinite-size system. As a result, one can simulate dynamics of a system for a longer time with a significant computational cost reduction compared to traditional methods. In two spatial dimensions, the tensor network known as Projected Entangled Pair States (PEPS) is emerging as a useful approach. However algorithms for optimizing the matrix elements of these tensors are complex and not very efficient. In particular, the efficiency of the optimization depends critically on the quality of the so-called ``environment'', which is expensive to compute. We have introduced a new method to accelerate the convergence of calculating the PEPS ground state by recycling the environment tensors for many optimization steps, vastly reducing the number of times that the full environment needs to be calculated.

•Jan 1, 2013•0 citations
The Thesis explores the application of Matrix Product States (MPS) in the domain of quantum many-body systems and quantum computing, show casing the versatility and effectiveness of MPS for addressing complex com putational challenges. The opening chapter introduces essential tools for Tensor Networks, addressing the curse of dimensionality and elucidating the main characteristics of Matrix Product States and Matrix Product Op erators. The discussion encompasses also important numerical techniques, including Density Matrix Renormalization Group and Time Evolving Block Decimation. Furthermore, the relation between MPS and quantum circuits is discussed. The subsequent Chapters delve into specific applications of MPS. In the second Chapter, we introduce a Tensor Network ansatz inspired by the backflow transformation for correlated systems. This extension of the MPS representation ensures an area law for entanglement in dimensions one or greater. We employ an optimization scheme combining DMRG and variational Monte Carlo algorithms for efficient ground-state search. Bench marking against spin models demonstrates high accuracy. The third Chapter explores quantum annealing for optimizing complex classical spin Hamil tonians, as the Hopfield model and the binary perceptron. We introduce an efficient Tensor Network representation for the adiabatic time evolution of quantum annealing, enabling scalable classical simulations. The use of MPS in mitigating Trotter errors and mapping to quantum circuits is also explored. In the fourth Chapter we present a novel method for evaluating the amount of nonstabilizerness (also known as quantum magic) contained in an MPS. We overcome the exponentially hard evaluation of this quan tity by employing a simple perfect sampling technique of Pauli string. Our innovative MPS approach enables efficient computation. Benchmarked on magic states and the quantum Ising chain ground state, this method offers easy access to the non-equilibrium dynamics of nonstabilizerness following a quantum quench. The Appendices provide additional insights, including: an introduction to variational Monte Carlo, technical details on MPS simula tions for the quantum annealing and a comprehensive overview on stabilizer formalism and nonstabilizerness.
This book serves as an introductory yet thorough guide to tensor networks and their applications in quantum computation and quantum information, designed for advanced undergraduate and graduate-level readers. In Part I, foundational topics are covered, including tensor structures and network representations like Matrix Product States (MPS) and Tree Tensor Networks (TTN). These preliminaries provide readers with the core mathematical tools and concepts necessary for quantum physics and quantum computing applications, bridging the gap between multi-linear algebra and complex quantum systems. Part II explores practical applications of tensor networks in simulating quantum dynamics, with a particular focus on the efficiency they offer for systems of high computational complexity. Key topics include Hamiltonian dynamics, quantum annealing, open system dynamics, and optimization strategies using TN frameworks. A final chapter addresses the emerging role of “quantum magic” in tensor networks. It delves into non-stabilizer states and their contribution to quantum computational power beyond classical simulability, featuring methods such as stabilizer-enhanced MPS and the Clifford-dressed TDVP. In presenting tensor networks as tools for understanding quantum complexity, this book aims to foster a deeper collaboration between the many-body physics and quantum computing communities, inviting a broader audience to engage with these recent developments.
In this thesis, the numerical simulation of strongly-interacting many-body quantum-mechanical systems using matrix product states (MPS) is considered. Compared to classical systems, quantum many-body systems possess an exponentially enlarged number of degrees of freedom, significantly complicating a simulation on a classical computer. Matrix-Product-States are a novel representation of arbitrary quantum many-body states. Using quantum information theory, it is possible to show that Matrix-Product-States provide a polynomial-sized representation of one-dimensional quantum systems, thus allowing an efficient simulation of one-dimensional quantum system on classical computers. Matrix-Product-States form the conceptual framework of the density-matrix renormalization group (DMRG). Based upon this connection, deeper understanding of the density matrix renormalization group can be obtained. After a general introduction in the first chapter of this thesis, the second chapter deals with Matrix-Product-States, focusing on the development of fast and stable algorithms. It is possible to extend the Matrix-Product-States approach to be able to represent arbitrary operators, the so-called Matrix-Product-Operators, which allows a fast and flexible calculation of arbitrary expectation values. To obtain algorithms to efficiently calculate groundstates, the density-matrix renormalization group is reformulated using the Matrix-Product-States framework. Further, time-dependent problems are considered. Two different algorithms are presented, one based on a Trotter decomposition of the time-evolution operator, the other one on Krylov subspaces. Finally, the evaluation of dynamical spectral functions is discussed, and a correction vector-based method is presented. In the following chapters, the methods presented in the second chapter, are applied to a number of different physical problems. The third chapter deals with the existence of chiral phases in isotropic one-dimensional quantum spin systems. A preceding analytical study based on a mean-field approach indicated the possible existence of those phases in an isotopic Heisenberg model with a frustrating zig-zag interaction and a magnetic field. In this thesis, the existence of the chiral phases will be shown numerically by using Matrix-Product-States-based algorithms. A key effect of interacting one-dimensional quantum-mechanical many-body systems is the spin-charge separation. However, up to now only signs of the spin-charge separation have been observed in experiments. In the fourth chapter, we propose an experiment using ultracold atomic gases in optical lattices, which allows a well controlled observation of the spin-charge separation (of different hyperfine states of the ultracold atoms) with current state of the art experimental techniques. Ultracold atoms in optical lattices are well described by (Bose)-Hubbard models. In order to support this proposal, we present numerical results for realistic system parameters. Matrix-Product-States are an excellent tool for the simulation of one-dimensional quantum systems, however, they are not well suited for the simulation of higher dimensional systems. For strongly-correlated systems, for instance cuprates-based high-temperature superconductors, quantum fluctuations play an essential role. Classical mean-field theories neglect any kind of fluctuations, thus they are not suitable to describe strongly-correlated systems. The dynamical mean-field theory (DMFT) fully takes local quantum fluctuations into account but neglects any kind of spatial fluctuations. The many-body problem on the lattice is mapped onto an impurity problem, which needs to be solved self-consistently. In the last chapter of this thesis, Matrix-Product-States-based algorithms are used to solve the impurity problem of the dynamical mean-field theory. We present results for a Hubbard model on a one-dimensional lattice and on a Bethe lattice obtained by the dynamical mean-field and compare them with exact results.
This is a set of lectures on tensor networks with a strong emphasis on the core algorithms involving Matrix Product States (MPS) and Matrix Product Operators (MPO). Compared to other presentations, particular care has been given to disentangle aspects of tensor networks from the quantum many-body problem: MPO/MPS algorithms are presented as a way to deal with linear algebra on extremely (exponentially) large matrices and vectors, regardless of any particular application. The lectures include well-known algorithms to find eigenvectors of MPOs (the celebrated DMRG), solve linear problems, and recent learning algorithms that allow one to map a known function into an MPS (the Tensor Cross Interpolation, or TCI, algorithm). The lectures end with a discussion of how to represent functions and perform calculus with tensor networks using the "quantics" representation. They include the detailed analytical construction of important MPOs such as those for differentiation, indefinite integration, convolution, and the quantum Fourier transform. Three concrete applications are discussed in detail: the simulation of a quantum computer (either exactly or with compression), the simulation of a quantum annealer, and techniques to solve partial differential equations (e.g. Poisson, diffusion, or Gross-Pitaevskii) within the "quantics" representation. The lectures have been designed to be accessible to a first-year PhD student and include detailed proofs of all statements.
This thesis treats the classical simulation of strongly-interacting many-body quantum-mechanical systems in more than one dimension using matrix product states and the more general tensor product states. Contrary to classical systems, quantum many-body systems possess an exponentially larger number of degrees of freedom, thereby significantly complicating their numerical treatment on a classical computer. For this thesis two different representations of quantum many-body states were employed. The first, the so-called matrix product states (MPS) form the basis for the extremely successful density matrix renormalization group (DMRG) algorithm. While originally conceived for one-dimensional systems, MPS are in principle capable of describing arbitrary quantum many-body states. Using concepts from quantum information theory it is possible to show that MPS provide a representation of one-dimensional quantum systems that scales polynomially in the number of particles, therefore allowing an efficient simulation of one-dimensional systems on a classical computer. One of the key results of this thesis is that MPS representations are indeed efficient enough to describe even large systems in two dimensions, thereby enabling the simulation of such systems using DMRG. As a demonstration of the power of the DMRG algorithm, it is applied to the Heisenberg antiferromagnet with spin S=1/2S = 1/2S=1/2 on the kagome lattice. This model's ground state has long been under debate, with proposals ranging from static spin configurations to so-called quantum spin liquids, states where quantum fluctuations destroy conventional order and give rise to exotic quantum orders. Using a fully SU(2)SU(2)SU(2)-symmetric implementation allowed us to handle the exponential growth of entanglement and to perform a large-scale study of this system, finding the ground state for cylinders of up to 700 sites. Despite employing a one-dimensional algorithm for a two-dimensional system, we were able to compute the spin gap (i.e. the energy gap to the first spinful excitation) and study the ground state properties, such as the decay of correlation functions, the static spin structure factors, and the structure and distribution of the nearest-neighbor spin-spin correlations. Additionally, by applying a new tool from quantum information theory, the topological entanglement entropy, we could also with high confidence demonstrate the ground state of this model to be the elusive gapped Z2Z_2Z2​ quantum spin liquid with topological order. To complement this study, we also considered the extension of MPS to higher dimensions, known as tensor product states (TPS). We implemented an optimization algorithm exploiting symmetries for this class of states and applied it to the bilinear-biquadratic-bicubic Heisenberg model with spin S=3/2S=3/2S=3/2 on the z=3z=3z=3 Bethe lattice. By carefully analyzing the simulation data we were able to determine the presence of both conventional and symmetry-protected topological order in this model, thereby demonstrating the analytically predicted existence of the Haldane phase in higher dimensions within an extended region of the phase diagram. Key properties of this symmetry-protected topological order include a doubling of the levels in the entanglement spectrum and the presence of edge spins, both of which were confirmed in our simulations. This finding simultaneously validated the applicability of the novel TPS algorithms to the search for exotic order.
These notes provide an introduction to tensor-network methods in quantum many-body physics, with an emphasis on matrix-product states (MPS). They develop the basic tensor-network language, including graphical notation, virtual indices, bond dimensions, gauge freedom, canonical forms, QR and singular-value decompositions, and the role of entanglement in controlling the efficiency of the representation. The main MPS algorithms are then introduced, including contractions, correlation functions, matrix-product operators, DMRG, and time-evolution methods. The notes also briefly discuss projected entangled-pair states (PEPS) as a higher-dimensional generalization of MPS, together with the basic ideas behind approximate PEPS contraction. Finally, tensor-network representations of mixed states, quantum channels, and Lindblad dynamics are presented, with applications to thermal states and open quantum systems. The presentation is accompanied by short Julia code examples based on ITensor, ITensorMPS, and TensorMixedStates. These notes were written for the 9th Les Houches Summer School on Computational Physics: Open Quantum Systems, held in June 2026.
The study of interacting quantum many-body systems is one of the central challenges in modern physics. Interestingly, by understanding the physical properties of such systems from a microscopic description, one can explain many complex quantum phenomena such as the high-temperature superconductivity, fractional quantum Hall effect, etc. However, due to high complexity of these systems, theoretical investigations such as analytical and perturbation theories are limited to studying only a small subset of problems. In the past few decades, numerical simulation has emerged as an indispensable method for studying many phenomena, and has led to immense success and progress in recent years. The main obstacle in addressing quantum many-body systems is that the number of parameters required to represent a state of the system scales exponentially with the system size. However, one hardly needs the full Hilbert space but only a small subspace to describe physical properties of the system. From the point of view in quantum information theory, quantum entanglement is one of the main factors that is responsible for the complexity of studying quantum many-body systems. In particular, the amount of quantum entanglement in such system quantifies the correlation between constituents and therefore it determines how big the subspace is required to represent the system. In this thesis, we are interested in using tensor network states, a new emerging numerical technique to study dynamical and ground state properties of the system. The key ingredient is that a tensor network state which consists of a fairly small number of parameters can represent very well the complete wave function of a system. In one spatial dimension, Matrix Product State (MPS) has become a standard tool, combined with related algorithms such as Time Evolving Block Decimation algorithm (TEBD) to study dynamical properties of a locally-perturbed quantum lattice system. In this thesis, we introduce a technique called ``infinite boundary conditions'' that allows us to use a finite-size MPS to represent the state of an infinite-size system. As a result, one can simulate dynamics of a system for a longer time with a significant computational cost reduction compared to traditional methods. In two spatial dimensions, the tensor network known as Projected Entangled Pair States (PEPS) is emerging as a useful approach. However algorithms for optimizing the matrix elements of these tensors are complex and not very efficient. In particular, the efficiency of the optimization depends critically on the quality of the so-called ``environment'', which is expensive to compute. We have introduced a new method to accelerate the convergence of calculating the PEPS ground state by recycling the environment tensors for many optimization steps, vastly reducing the number of times that the full environment needs to be calculated.