Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Instrumentation and Measurement Technology Conference

Preliminary Analysis of the Impact of External Parameters on the Performance of a 2-Qubit NMR Desktop Quantum Computer

Marco Carratù, Giuseppe Di Leo, Vincenzo Gallo, Valter Laino, Consolatina Liguori, Antonio Pietrosanto

Published May 1, 2026• 0 citations
Publisher

Abstract

In recent years, quantum computing has become increasingly relevant across many application domains, partly due to the growing availability of the latest generation of desktop quantum computers. However, since these systems are relatively less expensive and lack sophisticated conditioning and isolation mechanisms, they may be prone to computational errors or deviations from expected results caused by various factors. For this reason, developing methods to minimize or correct quantum errors, both in terms of spurious outcomes and quantum decoherence, is essential, as these effects may arise from the influence of external parameters within the computer's operating environment. Nevertheless, as this is an emerging paradigm, standardized procedures for sensitivity analysis and device characterization are still needed. This work represents an initial step toward establishing characterization procedures aimed at estimating the repeatability of results produced by a 2-qubit Nuclear Magnetic Resonance (NMR)-based desktop quantum computer under controlled external parameters.

DOI
10.1109/i2mtc66907.2026.11694570

Related papers

Reliability analysis of algorithms on a desk Quantum Computer

Marco Carratù, Giuseppe Di Leo, Vincenzo Gallo +4 more

Quantum computing, a data processing technology based on quantum mechanics, is one of the most promising technologies in the current research scenario. Indeed, this new paradigm disrupts how information is conceived, stored, and processed thus making quantum computers still complicated to manage and program. Added to this complexity is the need to guarantee quantum coherence, which could fail due to either noise or the influence of external parameters. While high-power quantum computers are usually conditioned and protected by complex and expensive systems supplied by the manufacturer itself, relatively low-cost desk quantum computers are only accompanied by data sheets reporting operation limits within influence parameters should be constrained but no analytical information is provided about computer sensitivity to the parameters. In this paper, the authors report the experimental results of a desk two-qubit quantum computer performance characterization carried out by evaluating its sensitivity to influence parameters during the execution of elementary algorithms. The aim is to help face the use of this frontier computing resource also in research projects where funds cannot cover the cost of complex conditioning systems. After a brief introduction on quantum computing and circuits, the adopted test method is described, and the experimental results discussed in detail.

Measurement Sensors•Feb 20, 2025•3 citations

The impact of noise on the simulation of NMR spectroscopy on NISQ devices

Andisheh Khedri, Pascal Stadler, Kirsten Bark +5 more

With the surge of quantum computing platforms that continue to push the boundaries of capabilities of noisy intermediate-scale quantum computers, there is a growing interest in finding relevant applications and quantifying the corresponding error budgets. We present a simulation of nuclear magnetic resonance (NMR) spectroscopy of small organic molecules on publicly available cloud quantum computers. We are using two quantum computing platforms, namely IBM's quantum processors based on superconducting qubits and IonQ's Aria trapped ion quantum computer addressed via Amazon Braket. We analyze the impact of noise on the obtained NMR spectra, and we formulate an effective decoherence rate that quantifies the threshold noise that our proposed algorithm can tolerate. We show that the effective decoherence rate can be calculated using simple fidelity metrics that are available by cloud quantum computing providers. Our investigation paves the way to better employ such application-driven quantum tasks on current noisy quantum devices.

arXiv:2404.18903•Apr 29, 2024•11 citations

Assessment of Larmor-Related Spectral Stability as a Function of Port Count and Mechanical Vibrations

Marco Carratù, Giuseppe Di Leo, Vincenzo Gallo +3 more

The latest generation of low-cost quantum computers, such as desktop NMR-based systems, is becoming increasingly attractive for both scientific and academic applications. For this reason, it is essential to assess the reliability and stability of the fundamental parameters of such devices, especially as circuit complexity increases or when they are exposed to external factors, since these conditions may cause parameter shifts that can lead to erroneous results. Systematic procedures for the sensitivity analysis and characterization of such devices are still underdeveloped, yet they are essential to ensure their proper operation. This work aims to assess the repeatability of the Larmor-related spectral component in the rotating frame, used as a practical indicator for the Larmor frequency, under increasing circuit depth and in the presence of external disturbances, such as mechanical vibrations. The proposed approach provides the foundation for establishing quantitative metrics of stability and reproducibility, which are essential for ensuring the robustness of next-generation quantum computing platforms.

IEEE International Instrumentation and Measurement Technology Conference•May 1, 2026•0 citations

Toward a personal quantum computer

Henry Chong

The realization of nuclear magnetic resonance (NMR) as a means to perform useful quantum computations has warranted a detailed discussion regarding the physics and instrumentation underlying the construction of a NMR quantum computer to facilitate the design of a desktop quantum computer. A brief overview of classical mechanics, quantum mechanics, and statistical mechanics is presented with Newton’s first law as a starting point. A correspondence between an initially postulated classical magnetic moment model and first principles will be made, and methods for the measurement and interpretation of macroscopically manifest observables are discussed. An introduction to quantum computation will delineate the elements required for computation in analogy to those required for conventional digital computation. The advantages afforded through the use of quantum computational algorithms are discussed, and the employment of NMR to perform quantum computations is presented. Design considerations for the instrumentation necessary to observe NMR with the cost and physical constraints of a desktop apparatus are reviewed. Low-noise and radio-frequency (RF) instrumentation design needs and constraints are explained in the context of refining sensitivity and frequency resolution requirements of an NMR spectrometer. Experimental considerations for the use of physical processes to enhance sensitivity and spectral resolution are also described. Results from a desktop NMR spectrometer is presented with a prescription for future progress. Thesis Supervisor: Neil A. Gershenfeld Title: Director, Physics and Media Group, MIT Media Laboratory

•Jan 1, 1997•0 citations

Quantum Control of Nuclear Spins

J. S. Hodges, Paola Cappellaro, Timothy F. Havel +1 more

Nuclear magnetic resonance (NMR) spectroscopy has proven to be a facile means of achieving small-scale demonstrations of quantum information processing. This was in large part made possible by the sophisticated methods of quantum control that have been developed by the NMR community over a span of more than 50 years. The traditional control methods, already perhaps the most complex examples of open-loop control available, were nevertheless designed primarily to assist in identifying the physical parameters of the underlying spin system, rather than to control the system with high precision. We have therefore extended the traditional methods in a variety of ways so as to achieve precise control, by taking advantage of prior knowledge of the physical parameters as determined by traditional methods. Due to the experimental challenges of real-time control, these developments relied upon our ability to simulate the evolution of the system under the action of radio-frequency control fields with essentially arbitrary precision, subject only to the available computing power. This talk presents an overview of our work in quantum control together with some of the on-going challenges still facing us

IEEE Conference on Decision and Control (CDC)•Jan 1, 2006•0 citations

Error characterization and quantum control benchmarking in liquid state NMR using quantum information processing techniques

Martin Laforest

Quantum information processing has been the subject of countless discoveries since the early 1990's. It is believed to be the way of the future for computation: using quantum systems permits one to perform computation exponentially faster than on a regular classical computer. Unfortunately, quantum systems that not isolated do not behave well. They tend to lose their quantum nature due to the presence of the environment. If key information is known about the noise present in the system, methods such as quantum error correction have been developed in order to reduce the errors introduced by the environment during a given quantum computation. In order to harness the quantum world and implement the theoretical ideas of quantum information processing and quantum error correction, it is imperative to understand and quantify the noise present in the quantum processor and benchmark the quality of the control over the qubits. Usual techniques to estimate the noise or the control are based on quantum process tomography (QPT), which, unfortunately, demands an exponential amount of resources. \n \nThis thesis presents work towards the characterization of noisy processes in an efficient manner. The protocols are developed from a purely abstract setting with no system-dependent variables. To circumvent the exponential nature of quantum process tomography, three different efficient protocols are proposed and experimentally verified. The first protocol uses the idea of quantum error correction to extract relevant parameters about a given noise model, namely the correlation between the dephasing of two qubits. Following that is a protocol using randomization and symmetrization to extract the probability that a given number of qubits are simultaneously corrupted in a quantum memory, regardless of the specifics of the error and which qubits are affected. Finally, a last protocol, still using randomization ideas, is developed to estimate the average fidelity per computational gates for single and multi qubit systems. \n \nEven though liquid state NMR is argued to be unsuitable for scalable quantum information processing, it remains the best test-bed system to experimentally implement, verify and develop protocols aimed at increasing the control over general quantum information processors. For this reason, all the protocols described in this thesis have been implemented in liquid state NMR, which then led to further development of control and analysis techniques.

•Sep 12, 2008•9 citations
In recent years, quantum computing has become increasingly relevant across many application domains, partly due to the growing availability of the latest generation of desktop quantum computers. However, since these systems are relatively less expensive and lack sophisticated conditioning and isolation mechanisms, they may be prone to computational errors or deviations from expected results caused by various factors. For this reason, developing methods to minimize or correct quantum errors, both in terms of spurious outcomes and quantum decoherence, is essential, as these effects may arise from the influence of external parameters within the computer's operating environment. Nevertheless, as this is an emerging paradigm, standardized procedures for sensitivity analysis and device characterization are still needed. This work represents an initial step toward establishing characterization procedures aimed at estimating the repeatability of results produced by a 2-qubit Nuclear Magnetic Resonance (NMR)-based desktop quantum computer under controlled external parameters.
Quantum computing, a data processing technology based on quantum mechanics, is one of the most promising technologies in the current research scenario. Indeed, this new paradigm disrupts how information is conceived, stored, and processed thus making quantum computers still complicated to manage and program. Added to this complexity is the need to guarantee quantum coherence, which could fail due to either noise or the influence of external parameters. While high-power quantum computers are usually conditioned and protected by complex and expensive systems supplied by the manufacturer itself, relatively low-cost desk quantum computers are only accompanied by data sheets reporting operation limits within influence parameters should be constrained but no analytical information is provided about computer sensitivity to the parameters. In this paper, the authors report the experimental results of a desk two-qubit quantum computer performance characterization carried out by evaluating its sensitivity to influence parameters during the execution of elementary algorithms. The aim is to help face the use of this frontier computing resource also in research projects where funds cannot cover the cost of complex conditioning systems. After a brief introduction on quantum computing and circuits, the adopted test method is described, and the experimental results discussed in detail.
With the surge of quantum computing platforms that continue to push the boundaries of capabilities of noisy intermediate-scale quantum computers, there is a growing interest in finding relevant applications and quantifying the corresponding error budgets. We present a simulation of nuclear magnetic resonance (NMR) spectroscopy of small organic molecules on publicly available cloud quantum computers. We are using two quantum computing platforms, namely IBM's quantum processors based on superconducting qubits and IonQ's Aria trapped ion quantum computer addressed via Amazon Braket. We analyze the impact of noise on the obtained NMR spectra, and we formulate an effective decoherence rate that quantifies the threshold noise that our proposed algorithm can tolerate. We show that the effective decoherence rate can be calculated using simple fidelity metrics that are available by cloud quantum computing providers. Our investigation paves the way to better employ such application-driven quantum tasks on current noisy quantum devices.
The latest generation of low-cost quantum computers, such as desktop NMR-based systems, is becoming increasingly attractive for both scientific and academic applications. For this reason, it is essential to assess the reliability and stability of the fundamental parameters of such devices, especially as circuit complexity increases or when they are exposed to external factors, since these conditions may cause parameter shifts that can lead to erroneous results. Systematic procedures for the sensitivity analysis and characterization of such devices are still underdeveloped, yet they are essential to ensure their proper operation. This work aims to assess the repeatability of the Larmor-related spectral component in the rotating frame, used as a practical indicator for the Larmor frequency, under increasing circuit depth and in the presence of external disturbances, such as mechanical vibrations. The proposed approach provides the foundation for establishing quantitative metrics of stability and reproducibility, which are essential for ensuring the robustness of next-generation quantum computing platforms.
The realization of nuclear magnetic resonance (NMR) as a means to perform useful quantum computations has warranted a detailed discussion regarding the physics and instrumentation underlying the construction of a NMR quantum computer to facilitate the design of a desktop quantum computer. A brief overview of classical mechanics, quantum mechanics, and statistical mechanics is presented with Newton’s first law as a starting point. A correspondence between an initially postulated classical magnetic moment model and first principles will be made, and methods for the measurement and interpretation of macroscopically manifest observables are discussed. An introduction to quantum computation will delineate the elements required for computation in analogy to those required for conventional digital computation. The advantages afforded through the use of quantum computational algorithms are discussed, and the employment of NMR to perform quantum computations is presented. Design considerations for the instrumentation necessary to observe NMR with the cost and physical constraints of a desktop apparatus are reviewed. Low-noise and radio-frequency (RF) instrumentation design needs and constraints are explained in the context of refining sensitivity and frequency resolution requirements of an NMR spectrometer. Experimental considerations for the use of physical processes to enhance sensitivity and spectral resolution are also described. Results from a desktop NMR spectrometer is presented with a prescription for future progress. Thesis Supervisor: Neil A. Gershenfeld Title: Director, Physics and Media Group, MIT Media Laboratory
Nuclear magnetic resonance (NMR) spectroscopy has proven to be a facile means of achieving small-scale demonstrations of quantum information processing. This was in large part made possible by the sophisticated methods of quantum control that have been developed by the NMR community over a span of more than 50 years. The traditional control methods, already perhaps the most complex examples of open-loop control available, were nevertheless designed primarily to assist in identifying the physical parameters of the underlying spin system, rather than to control the system with high precision. We have therefore extended the traditional methods in a variety of ways so as to achieve precise control, by taking advantage of prior knowledge of the physical parameters as determined by traditional methods. Due to the experimental challenges of real-time control, these developments relied upon our ability to simulate the evolution of the system under the action of radio-frequency control fields with essentially arbitrary precision, subject only to the available computing power. This talk presents an overview of our work in quantum control together with some of the on-going challenges still facing us
Quantum information processing has been the subject of countless discoveries since the early 1990's. It is believed to be the way of the future for computation: using quantum systems permits one to perform computation exponentially faster than on a regular classical computer. Unfortunately, quantum systems that not isolated do not behave well. They tend to lose their quantum nature due to the presence of the environment. If key information is known about the noise present in the system, methods such as quantum error correction have been developed in order to reduce the errors introduced by the environment during a given quantum computation. In order to harness the quantum world and implement the theoretical ideas of quantum information processing and quantum error correction, it is imperative to understand and quantify the noise present in the quantum processor and benchmark the quality of the control over the qubits. Usual techniques to estimate the noise or the control are based on quantum process tomography (QPT), which, unfortunately, demands an exponential amount of resources. \n \nThis thesis presents work towards the characterization of noisy processes in an efficient manner. The protocols are developed from a purely abstract setting with no system-dependent variables. To circumvent the exponential nature of quantum process tomography, three different efficient protocols are proposed and experimentally verified. The first protocol uses the idea of quantum error correction to extract relevant parameters about a given noise model, namely the correlation between the dephasing of two qubits. Following that is a protocol using randomization and symmetrization to extract the probability that a given number of qubits are simultaneously corrupted in a quantum memory, regardless of the specifics of the error and which qubits are affected. Finally, a last protocol, still using randomization ideas, is developed to estimate the average fidelity per computational gates for single and multi qubit systems. \n \nEven though liquid state NMR is argued to be unsuitable for scalable quantum information processing, it remains the best test-bed system to experimentally implement, verify and develop protocols aimed at increasing the control over general quantum information processors. For this reason, all the protocols described in this thesis have been implemented in liquid state NMR, which then led to further development of control and analysis techniques.