The rapid growth of Consumer Internet-of-Things (CIoT) devices within Zero-Trust Architectures (ZTA) requires authentication mechanisms that provide post-quantum security, privacy, and accountability. Traditional Public Key Infrastructures (PKI) using RSA or ECC are vulnerable to quantum adversaries via Shor’s algorithm, while existing ring signature schemes lack conditional traceability or Zero-Trust integration. This paper presents QuantumRing-ZT, a Conditional Privacy-Preserving Authentication (CPPA) framework integrating lattice-based traceable zero-knowledge ring signatures with Zero-Trust policy enforcement. The scheme provides: (1) post-quantum security under Module-LWE and Module-SIS assumptions; (2) computational signer anonymity with 1/Nguessing probability; (3) conditional traceability viat-of-kthreshold decryption; (4) domain-specific linkability for double-signing detection; and (5) continuous Zero-Trust compliance via multi-factor trust scoring. We present an eight-step construction with formal security proofs in the Quantum Random Oracle Model (QROM) and validation on ESP32-C3 and Raspberry Pi 4. Experimental results show signing latency of 61.5 ms (33.4% faster than baseline lattice ring signatures), signature size of 11.2 KB forN= 64 (2.1× reduction vs. linear-growth schemes), and energy consumption of 9.8 mJ (30.5% improvement over comparable traceable schemes). Compared to Dilithium3, QuantumRing-ZT adds full anonymity and traceability with 26.3% signing overhead. These results confirm viability for battery-operated CIoT deployments with 1.5-year battery life at 1 signature/minute.
The rapid growth of Consumer Internet-of-Things (CIoT) devices within Zero-Trust Architectures (ZTA) requires authentication mechanisms that provide post-quantum security, privacy, and accountability. Traditional Public Key Infrastructures (PKI) using RSA or ECC are vulnerable to quantum adversaries via Shor’s algorithm, while existing ring signature schemes lack conditional traceability or Zero-Trust integration. This paper presents QuantumRing-ZT, a Conditional Privacy-Preserving Authentication (CPPA) framework integrating lattice-based traceable zero-knowledge ring signatures with Zero-Trust policy enforcement. The scheme provides: (1) post-quantum security under Module-LWE and Module-SIS assumptions; (2) computational signer anonymity with 1/Nguessing probability; (3) conditional traceability viat-of-kthreshold decryption; (4) domain-specific linkability for double-signing detection; and (5) continuous Zero-Trust compliance via multi-factor trust scoring. We present an eight-step construction with formal security proofs in the Quantum Random Oracle Model (QROM) and validation on ESP32-C3 and Raspberry Pi 4. Experimental results show signing latency of 61.5 ms (33.4% faster than baseline lattice ring signatures), signature size of 11.2 KB forN= 64 (2.1× reduction vs. linear-growth schemes), and energy consumption of 9.8 mJ (30.5% improvement over comparable traceable schemes). Compared to Dilithium3, QuantumRing-ZT adds full anonymity and traceability with 26.3% signing overhead. These results confirm viability for battery-operated CIoT deployments with 1.5-year battery life at 1 signature/minute.
With the rapid development of quantum computers and quantum computing, Internet of Things (IoT) networks equipped with traditional cryptographic algorithms have become very weak against quantum attacks. This paper focuses on the privacy-preserving problem in IoT networks and proposes a certificateless ring signature (CLRS) scheme. This CLRS is constructed with lattice theories, which show promising advantages in resisting quantum attacks. Meanwhile, the certificateless mechanism reduces the key control ability of the key generation center (KGC) by adding personal secret keys to the private key generated by the system. Meanwhile, the ring signature mechanism protects users' privacy information through a non-central control mechanism. Next, the security proof in a random oracle model is given, which shows that this CLRS scheme can obtain unforgeability and ensure the signer's anonymity. Its security properties include non-repudiation, traceability, and post-quantum security. Then, the efficiency comparison and performance results show that this CLRS scheme is more efficient and practical than similar schemes. Moreover, this work presents an exploration of the post-quantum cryptographic algorithm and its application in IoT networks.
With the rapid expansion of consumer electronics and the Internet of Things (IoT) ecosystem, ensuring secure communication in resource-constrained edge devices has become a critical challenge, especially under the threat of quantum attacks. Although lattice-based cryptographic schemes provide post-quantum security, they often suffer from large key storage and high computational overhead, limiting their applicability in edge environments. To address these challenges, we propose an identity-based linkable ring signcryption scheme constructed on the post quantum Lattice cryptography, tailored for edge-enabled IoT systems. The scheme employs a trapdoor generation algorithm to establish the master keys, utilizes compact Gaussian sampling to derive private keys for ring members, and integrates rejection sampling to generate user signatures with strong anonymity. Furthermore, a key encapsulation mechanism ensures identity protection during encryption. Security analysis under the Random Oracle Model (ROM) demonstrates the scheme's resistance to forgery and its linkability property. Performance evaluation shows that the proposed approach achieves smaller public keys, reduced encryption/decryption costs, and enhanced efficiency, making it well-suited for lightweight IoT and consumer electronics applications in the post-quantum era.
A ring signature (RS) scheme enables a group member to sign messages on behalf of its group without revealing the definite signer identify, but this also leads to the abuse of anonymity by malicious signers, which can be prevented by traceable ring signatures (TRS). Up until that point, traceable ring signatures have been secure based on the difficult problem of number-theoretic (discrete logarithms or RSA), but since the advent of quantum computers, traditional traceable ring signatures may no longer be secure. Thus Feng proposed a lattice based TRS, which are resistant to attacks by quantum computers. However, that works did not tackle the certificate management problem. To close this gap, a quantum-resistant certificateless TRS scheme was proposed in the study. To the best of our knowledge, this is the first lattice based certificateless TRS. In detail, a specific TRS scheme was combined with the lattice-based certificateless signature technology to solve the certificate management problem while avoid key escrow problem. Additionally, a better zero-knowledge protocol is used to improve the computational efficiency of the scheme, and by reducing the soundness error of the zero-knowledge protocol, the number of runs of the zero-knowledge protocol is reduced, so that the communication overhead of the scheme is reduced. Under random oracle model, the proposed scheme satisfies tag-linkability, anonymity, exculpability and is secure based on the SIS problem and the DLWE problem. In conclusion, the proposed scheme is more practical and promising in e-voting.
The Edge-enabled Industrial Internet of Things (Edge-IIoT) has emerged as a fundamental architecture for intelligent manufacturing by enabling low-latency data collection, processing, and communication among distributed industrial devices. However, the open and distributed nature of Edge-IIoT introduces significant challenges to secure data authentication and privacy preservation. Meanwhile, conventional public key infrastructure incurs considerable certificate management overhead and is not well suited for future industrial environments in the presence of quantum computing. To address these challenges, this paper proposes a lattice-based certificateless blind signature scheme for secure and privacy-preserving authentication in Edge-IIoT. The proposed scheme integrates the Dilithium signature algorithm with certificateless public key cryptography and blind signature techniques to simultaneously provide anonymous authentication, data integrity, conditional identity revocation, and post-quantum security while eliminating the certificate management overhead associated with traditional public key infrastructures. Furthermore, the proposed construction improves existing lattice-based certificateless blind signature schemes by addressing identified security weaknesses and strengthening resistance against forgery attacks, while effectively avoiding the key escrow problem inherent in identity-based cryptography. The correctness, blindness, and unforgeability of the proposed scheme are formally proved in the random oracle model based on the hardness of the Module Short Integer Solution (MSIS) problem. In addition, theoretical performance analysis demonstrates that the proposed scheme incurs acceptable computational, communication, and storage overhead while providing comprehensive security properties, including certificateless operation, identity anonymity, no key escrow, conditional revocation, and post-quantum security. Overall, the proposed scheme achieves an effective balance between security, privacy preservation, and efficiency, which exhibits favorable theoretical security-efficiency trade-offs for secure industrial data authentication in resource-constrained Edge-IIoT environments. Practical implementation is left for future investigation.
Current cellular authentication mechanisms rely primarily on SIM-based Authentication and Key Agreement (AKA), which have scaled successfully worldwide but face challenges as the Internet of Things (IoT) grows to billions of devices. SIM provisioning and lifecycle management become increasingly costly, while reliance on long-term symmetric keys limits revocation flexibility and cross-operator support. To address these issues, we propose a SIM-less, certificate-based authentication framework that integrates Public Key Infrastructure (PKI) with post-quantum cryptography (PQC). Specifically, the framework employs Kyber for key encapsulation and Dilithium for digital signatures, providing quantum-resistant protection for future networks. A key challenge is the computational overhead of PQC on constrained IoT devices; we address this by offloading cryptographic operations to trusted edge servers, whose integrity is validated using attestation mechanisms such as Trusted Platform Modules (TPMs) or secure enclaves. We implement and evaluate the framework in a simulated FutureG environment, comparing IoT-only execution against edge-assisted configurations. Results show that edge offloading reduces TLS handshake latency by up to 96% while maintaining minimal resource usage on devices. These findings demonstrate that PQC-enabled PKI, combined with edge-assisted execution, offers a scalable and practical complement to SIM/AKA for secure and quantum-resilient authentication in FutureG IoT deployments.
The rapid expansion of consumer technologies such as Internet of Things devices, smart home systems, and wearable electronics has created new security challenges, especially as quantum computing threatens traditional encryption methods. This paper proposes PrivShield-CQ, a chaotic–quantum encryption framework designed for post-quantum secure consumer applications. The framework integrates a six-dimensional hyperchaotic Chen system for high-entropy key generation with National Institute of Standards and Technology (NIST) standardized post-quantum algorithms, including Module Lattice Key Encapsulation Mechanism (ML-KEM), Module Lattice Digital Signature Algorithm (ML-DSA), and Stateless Hash Digital Signature Algorithm (SLH-DSA). Extensive experiments across devices such as ESP32, Raspberry Pi 4B, and Galaxy S23 demonstrate significant improvements: 99.7% quantum attack resistance, 65.4% lower authentication latency with 3.7 ms average response, 31.4% energy savings, and 33.0% extended battery life compared to existing post-quantum cryptography approaches. Shannon entropy analysis (7.9973/8.0) and successful completion of all 15 National Institute of Standards and Technology randomness tests confirm cryptographic strength. Validated through a six-month real-world deployment with over 10,000 secure interactions per hour, PrivShield-CQ bridges the gap between theoretical quantum-safe cryptography and practical consumer use, enabling scalable, energy-efficient, and quantum-resistant security for next-generation connected ecosystems. • Proposes PrivShield-CQ, a hybrid chaotic-quantum encryption framework for post-quantum secure consumer applications. • Achieves 99.7% quantum resistance effectiveness against simulated quantum attacks. • Reduces authentication latency by 65.4% with an average response time of 3.7 ms. • Optimizes energy consumption with 31.4% savings and extends battery life by 33.0%. • Ensures 94.2% cross-platform compatibility across heterogeneous consumer device ecosystems.