This document proposes an experimentally testable method for quantum control in thepresence of temporally correlated environmental noise. The central hypothesis is not thatnon-Markovianity necessarily improves quantum control, but that measured environmentalmemory may contain predictive information that can be incorporated into control optimization.Version 2.0 introduces a strict separation between three objects that were partially con-flated in the previous formulation:1. the environmental noise power spectral density S(ω);2. the quantum gate filter function Fgate(ω; u);3. the classical control-line transfer function Hctrl(ω).The proposed method therefore does not identify an arbitrary transfer function with thequantum filter function. Instead, the environmental spectrum and temporal correlationsare first characterized experimentally, after which control waveforms are optimized using amemory-aware objective.Three control models are defined:M0: conventional reference control;M1: memory-unaware optimized control using the measured noise spectrum but not its tem-poral memory structure;M2: memory-aware optimized control using both spectral and temporal-correlation informa-tion.The primary scientific comparison is M2 versus M1 under matched experimental con-straints. This design tests whether explicit memory information provides additional predic-tive/control value beyond knowledge of the stationary noise spectrum.The framework is deliberately phenomenological. It does not claim a new fundamentaltheory of quantum mechanics, nor does it assume that non-Markovian noise is universallyadvantageous. The proposed experiment is designed to determine whether measurable envi-ronmental memory can produce a statistically significant reduction in gate infidelity undermatched control resources.
This document proposes an experimentally testable method for quantum control in thepresence of temporally correlated environmental noise. The central hypothesis is not thatnon-Markovianity necessarily improves quantum control, but that measured environmentalmemory may contain predictive information that can be incorporated into control optimization.Version 2.0 introduces a strict separation between three objects that were partially con-flated in the previous formulation:1. the environmental noise power spectral density S(ω);2. the quantum gate filter function Fgate(ω; u);3. the classical control-line transfer function Hctrl(ω).The proposed method therefore does not identify an arbitrary transfer function with thequantum filter function. Instead, the environmental spectrum and temporal correlationsare first characterized experimentally, after which control waveforms are optimized using amemory-aware objective.Three control models are defined:M0: conventional reference control;M1: memory-unaware optimized control using the measured noise spectrum but not its tem-poral memory structure;M2: memory-aware optimized control using both spectral and temporal-correlation informa-tion.The primary scientific comparison is M2 versus M1 under matched experimental con-straints. This design tests whether explicit memory information provides additional predic-tive/control value beyond knowledge of the stationary noise spectrum.The framework is deliberately phenomenological. It does not claim a new fundamentaltheory of quantum mechanics, nor does it assume that non-Markovian noise is universallyadvantageous. The proposed experiment is designed to determine whether measurable envi-ronmental memory can produce a statistically significant reduction in gate infidelity undermatched control resources.
Quantum systems are rarely isolated from their surroundings. These hidden environments can retain information and return it later, producing correlated errors in quantum computers and complicating the interpretation of experiments. On a quantum processor, for example, one job can therefore leave an environmental trace that affects the next, even after the qubits themselves have been reset. Learning how this hidden influence persists and affects later behavior is therefore important, but the environment is often impossible to measure directly, and fully reconstructing its effects through tomography rapidly becomes impractical. Here, we introduce a response matrix that uses controlled interventions and observations of the system alone to reveal the temporal structure of environmental memory. The matrix records how future observations change across different controlled histories. Its spectrum characterizes how memory is structured and how it persists under specified system resets, while suitable linear combinations of its entries can rule out specified classical models of that memory. Because its history-future queries can be evaluated independently, numerical response matrices can be assembled in parallel. We establish the framework theoretically, characterize response spectra in an interacting spin process, and certify quantum memory in a two-qubit benchmark. This approach turns system observations into a probe of inaccessible environments and could support the diagnosis of correlated noise, tests of open system models, and memory-aware control design.
Environmental Memory as a Control Resource for Quantum Coherence Abstract The dominant paradigm in quantum technologies relies on suppressing environmental interactions to approximate a Markovian bath. While effective for isolated components at cryogenic temperatures, this strategy faces scaling and energetic constraints. Here we propose an alternative control framework in which structured environmental correlations are reconstructed and actively exploited. Using a memory-kernel description of open-system dynamics, we show that control fields can be designed to selectively sample stable spectral features of the environment, transforming it from a source of decoherence into a phase reference. This leads to a falsifiable prediction: a localized “coherence ridge” in the control landscape, where the effective coherence time increases under phase-matched driving. We formulate experimental protocols and mechanism- breaking ablations that distinguish genuine memory-assisted stabilization from drift or estimator bias. The results recast robustness as synchronization with environmental memory rather than isolation from noise.
We introduce a theoretical framework for resource-efficient characterization and control of non-Markovian open quantum systems, which naturally allows for the integration of given, experimentally motivated, control capabilities and constraints.This is achieved by developing a transfer filter-function formalism based on the general notion of a frame and by appropriately tying the choice of frame to the available control.While recovering the standard frequency-based filter-function formalism as a special instance, this control-adapted generalization affords intrinsic flexibility and, crucially, it permits an efficient representation of the relevant control matrix elements and dynamical integrals if an appropriate finite-size frame condition is obeyed.Our frame-based formulation overcomes important limitations of existing approaches.In particular, we show how to implement quantum noise spectroscopy in the presence of nonstationary noise sources, and how to effectively achieve control-driven model reduction for noise-optimized prediction and quantum gate design.
Environmental noise is a major source of decoherence and errors in quantum systems. In a non-Markovian environment, the noise has a finite correlation time, and the system can retain information about its previous interactions with the environment. Here, we investigate how such environmental memory can be observed through a finite-duration coherent quantum operation. Coherent control dynamically reshapes the stochastic coupling operator and thereby changes how two-time noise correlations affect the quantum process. For Ornstein-Uhlenbeck noise, we show analytically that two different limits reduce the information on the correlation time. In the short-memory limit, the leading dynamics depend on the integrated-noise combination σ/τc, where σ is the noise variance and τc is the correlation time, making these parameters locally degenerate. In the long-memory limit, the stochastic field becomes quasi-static during the operation, and sensitivity to the correlation time is suppressed. Exact stochastic simulations for a driven single-qubit Xπ rotation and a two-qubit exchange gate show that independent correlation-time information becomes largest between these limits, when the environmental and control timescales are comparable. Noncommuting controls enhance this information, whereas commuting controls do not. Simulations at different gate durations tg further show that the information window approximately follows the dimensionless correlation ratio τc/tg. These results provide a timescale-matching principle for probing finite-correlation non-Markovian noise with coherent quantum control.
Abstract In the scale-up of quantum computers, the framework underpinning fault-tolerance generally relies on the strong assumption that environmental noise affecting qubit logic is uncorrelated (Markovian). However, as physical devices progress well into the complex multi-qubit regime, attention is turning to understanding the appearance and mitigation of correlated — or non-Markovian — noise, which poses a serious challenge to the progression of quantum technology. This error type has previously remained elusive to characterisation techniques. Here, we develop a framework for characterising non-Markovian dynamics in quantum systems and experimentally test it on multi-qubit superconducting quantum devices. Where noisy processes cannot be accounted for using standard Markovian techniques, our reconstruction predicts the behaviour of the devices with an infidelity of 10 −3 . Our results show this characterisation technique leads to superior quantum control and extension of coherence time by effective decoupling from the non-Markovian environment. This framework, validated by our results, is applicable to any controlled quantum device and offers a significant step towards optimal device operation and noise reduction.
Precise environmental-noise characterisation in open quantum systems is a key step toward high-fidelity quantum control and targeted decoherence suppression in computing and sensing applications. Non-parametric quantum noise spectroscopy (QNS) provides a general-purpose, model-agnostic framework for estimating the spectral properties of an environment. The ability to perform such protocols under realistic constraints is key to their practical applicability. Notably, it is important to account for control constraints and understand how they limit the ability to learn about noise correlations as experiment-agnostic objects. We show how adopting a control-centric point of view allows one to recast the noise spectroscopy problem in such a way that (i) the central objects are now the time-ordered polyspectra, (ii) control filter functions are no longer encumbered by time-ordering. In particular, we show that this approach enables the seamless generalisation of frequency-comb QNS protocols to arbitrary control scenarios without introducing additional control symmetries that effectively remove time-ordering from filter functions, improving estimation in typically pathological scenarios. We demonstrate the targeted reconstruction of the time-ordered polyspectra across classical Gaussian and quantum non-Gaussian environments via simulations.