Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the noisy intermediate-scale quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various well known strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides an assessment of current quantum algorithms for molecular modeling on real quantum hardware, highlighting the impact of noise and hardware limitations on the achievable accuracy.
Quantum computing has emerged as a transformative approach for tackling complex problems in quantum chemistry, particularly in simulating multielectron systems and electron-phonon interactions. However, the current noisy intermediate-scale quantum (NISQ) devices face significant challenges in implementing practical quantum algorithms due to error accumulation caused by increased circuit depth, qubit counts, and gate operations. To address these challenges, we present TenCirChem, an open-source Python package specifically designed for implementing variational quantum algorithms in quantum computational chemistry. TenCirChem demonstrates exceptional performance in simulating unitary coupled-cluster circuits through its innovative use of compact representations for quantum states and excitation operators. This package supports noisy circuit simulation and provides advanced algorithms for variational quantum dynamics, enabling researchers to explore complex chemical phenomena. Its capabilities are exemplified in various applications, including the calculation of potential energy curves and the investigation of quantum gate error impacts on molecular systems. Moreover, TenCirChem’s seamless integration with real quantum hardware makes it a versatile tool for both simulation and experimentation. A key innovation developed within the TenCirChem framework is the Clifford-based Hamiltonian engineering approach for molecules (CHEM). This algorithm addresses the critical challenge of achieving chemical accuracy with shallow quantum circuits, a fundamental requirement for practical applications on NISQ devices. CHEM employs a sophisticated Clifford-based Hamiltonian transformation that operates within the variational quantum eigensolver (VQE) framework using hardware-efficient ansatz. The method ensures four crucial advantages: (1) generation of initial circuit parameters corresponding to Hartree-Fock energy, (2) maximization of initial energy gradients with respect to circuit parameters, (3) minimal classical processing overhead without additional quantum resource requirements, and (4) compatibility with any circuit topology. Through quantum hardware emulator demonstrations, CHEM has achieved chemical accuracy for systems up to 12 qubits with fewer than 30 two-qubit gates, representing a significant advancement in practical quantum computational chemistry. To enhance the efficiency of variational quantum algorithms, we developed the sequential optimization with approximate parabola (SOAP) method, specifically designed for parameter optimization in unitary coupled-cluster ansatz. SOAP addresses the critical bottleneck of measurement requirements in VQE by implementing an innovative optimization strategy that approximates the energy landscape as quadratic functions. This approach minimizes the number of energy evaluations while incorporating parameter correlations through the integration of average directions from previous iterations. Benchmark studies demonstrate SOAP’s superior performance, showing faster convergence and enhanced noise robustness compared to traditional optimization methods. The method’s scalability has been validated through numerical simulations of up to 20 qubits, and its practical efficacy has been confirmed through experiments on superconducting quantum computers. For simulating electron-phonon systems, we introduce a variational basis state encoding algorithm that significantly reduces resource requirements compared to conventional unary and binary encoding schemes. Our approach achieves smaller scaling than traditional methods for qubits and gates for systems obeying the area law of entanglement entropy, this remarkable reduction in resource requirements comes at the cost of a constant amount of additional measurements. The algorithm’s effectiveness has been validated through both numerical simulations and quantum hardware experiments, demonstrating that using just one or two qubits per phonon mode can produce quantitatively accurate results across various coupling regimes. The integration of these innovations within the TenCirChem library represents a significant advancement in quantum computational chemistry. The software package provides researchers with a comprehensive toolkit for developing, testing, and implementing quantum algorithms, while the novel methods address fundamental challenges in circuit depth, parameter optimization, and resource efficiency. These developments collectively enhance the practicality of quantum computing for addressing real-world chemical problems in the NISQ era, offering improved accuracy, efficiency, and noise robustness.
One of the first practical applications of quantum computers is expected to be molecular modelling. Performing this task would profoundly affect areas such as chemistry, materials science and drug synthesis. Modelling of molecules, which are classically intractable, can be achieved with just over
30 qubits, whereas state of the art quantum computers already have more than
50 qubits. The Variational Quantum Eigensolver (VQE) algorithm and VQE based protocols, are promising candidates to enable this task on emerging Noisy Intermediate-Scale Quantum (NISQ) computers. These protocols require short quantum circuits and short coherence times, and are particularly resilient to quantum errors. Nevertheless, there is still a significant gap between the accuracy and the coherence times of current NISQ computers, and the hardware requirements of VQE protocols to simulate practically interesting molecules. In this thesis, I present my contribution to narrowing this gap by developing VQE protocols for molecular modelling that are less demanding on quantum hardware. The VQE relies on the Rayleigh-Ritz variational principle to estimate the eigenvalues of a Hamiltonian operator, by minimizing its expectation value with respect to a trial quantum state, prepared by an ansatz. A major challenge for the practical realisation of VQE protocols on NISQ computers is to construct an ansatz that: (1) can accurately approximate the eigenstates of the Hamiltonian; (2) is easy to optimize; and (3) can be implemented by a shallow circuit, within the capabilities of a NISQ computer. The most widely used, unitary coupled cluster (UCC), type of ans\"atze mathematically correspond to a product of unitary evolutions of fermionic excitation operators. Owing to their fermionic structure, UCC ans\"atze preserve the symmetries of electronic wavefunctions, and thus are accurate and easy to optimize. Nevertheless, UCC ans\"atze are implemented by high depth circuits, which severely limit the size of the molecules that can be reliably simulated on NISQ computers. In this thesis, I begin by constructing efficient quantum circuits to perform evolutions of fermionic excitation operators. The circuits are optimized in the number of two-qubit entangling gates, which are the current bottleneck of NISQ computers. Compared to the standard circuits used to implement evolutions of fermionic excitation operators, the circuits derived in this thesis reduce the number of two-qubit entangling gates by more than
70% on average. As an intermediate result, I also derive efficient circuits to perform evolutions of qubit excitation operators (excitation operators that account for qubit, rather than fermionic commutation relations). Even with the fermionic-excitation-evolution circuits derived here, UCC ans\"atze still require very long circuits, with a particularly large number of two-qubit entangling gates. In this thesis, I consider the use of alternative VQE ans\"atze, based on evolutions of qubit excitation operators. Due to not accounting for fermionic anticommutation, evolutions of qubit excitation operators can be performed by circuits that require asymptotically fewer two-qubit entangling gates. Furthermore, qubit excitation operators preserve many of the physical properties of fermionic excitation operators. Performing a number of classical numerical VQE simulations for small molecules, I show that qubit-excitation-based ans\"atze can approximate molecular electronic wavefunctions almost as accurately as fermionic-excitation-based ans\"atze. Hence, I argue that evolutions of qubit excitation operators are more suitable to construct molecular ans\"atze than evolutions of fermionic excitation operators, especially in the era of NISQ computers. Motivated by the advantage of qubit-excitation-based ans\"atze, I introduce the qubit-excitation-based adaptive variational quantum eigensolver (QEB-ADAPT-VQE). The QEB-ADAPT-VQE belongs to a family of ADAPT-VQE protocols for molecular modelling that grow a problem-tailored ansatz by iteratively appending unitary operators sampled from a predefined finite-size pool of operators. The operator at each iteration is sampled based on an ansatz-growing strategy, which aims to achieve the lowest estimate for the Hamiltonian expectation value at each iteration. In this way, ADAPT-VQE protocols construct shallow-circuit, few-parameter ans\"atze tailored specifically to the molecular systems of interest. In the case of the QEB-ADAPT-VQE, the operator pool is defined by a set of evolutions of single and double qubit excitation operators. I benchmark the performance of the QEB-ADAPT-VQE, by performing classical numerical simulations. I demonstrate that it can construct ans\"atze that are several orders of magnitude more accurate, and require significantly shallower circuits, than standard UCC ans\"atze. I also compare the QEB-ADAPT-VQE against the original fermionic-ADAPT-VQE, which utilizes a pool of fermionic excitation evolutions, and the qubit-ADAPT-VQE, which utilizes a pool of Pauli-string evolutions. I demonstrate that, in terms of circuit efficiency and convergence speed, the QEB-ADAPT-VQE systematically outperforms the qubit-ADAPT-VQE, which to my knowledge was the previous most circuit-efficient, scalable VQE protocol for molecular modeling. The QEB-ADAPT-VQE protocol, therefore represents a significant improvement in the field of VQE protocols for molecular modelling and brings us closer to achieving practical quantum advantage. Lastly, I outline a modified version of the QEB-ADAPT-VQE, the excited-QEB-ADAPT-VQE, designed to estimate energies of excited molecular states. The excited-QEB-ADAPT-VQE is more robust to initial simulation conditions, at the expense of increased computational complexity.
The ADAPT-VQE algorithm is a promising method for generating a compact ansatz based on derivatives of the underlying cost function, and it yields accurate predictions of electronic energies for molecules. In this work, we report the implementation and performance of ADAPT-VQE with our recently developed sparse wave function circuit solver (SWCS) in terms of accuracy and efficiency for molecular systems with up to 52 spin orbitals. The SWCS can be tuned to balance computational cost and accuracy, which extends the application of ADAPT-VQE for molecular electronic structure calculations to larger basis sets and a larger number of qubits. Using this tunable feature of the SWCS, we propose an alternative optimization procedure for ADAPT-VQE to reduce the computational cost of the optimization. By preoptimizing a quantum simulation with a parametrized ansatz generated with ADAPT-VQE/SWCS, we aim to utilize the power of classical high-performance computing in order to minimize the work required on noisy intermediate-scale quantum hardware, which offers a promising path toward demonstrating quantum advantage for chemical applications.
Variational quantum eigensolver (VQE) is a hybrid quantum-classical algorithm designed for noisy intermediate-scale quantum (NISQ) computers. It is promising for quantum chemical calculations (QCC) because it can calculate the ground-state energy of a target molecule. Although VQE has a potential to achieve a higher accuracy than classical approximation methods in QCC, it is challenging to achieve it on current NISQ computers due to the significant impact of noises. Density matrix embedding theory (DMET) is a well-known technique to divide a molecule into multiple fragments, which is available to mitigate the noise impact on VQE. However, our preliminary evaluation shows that the naive combination of DMET and VQE does not outperform a gold standard classical method. In this work, we present three approaches to mitigate the noise impact for the DMET+VQE combination. (1) The size of quantum circuits used by VQE is decreased by reducing the number of bath orbitals which represent interactions between multiple fragments in DMET. (2) Reduced density matrices (RDMs), which are used to calculate a molecular energy in DMET, are calculated accurately based on expectation values obtained by executing quantum circuits using a noise-less quantum computer simulator. (3) The parameters of a quantum circuit optimized by VQE are refined with mathematical post-processing. The evaluation using a noisy quantum computer simulator shows that our approaches significantly improve the accuracy of the DMET+VQE combination. Moreover, we demonstrate that on a real NISQ device, the DMET+VQE combination applying our three approaches achieves a higher accuracy than the gold standard classical method.
High Resolution Image Download MS PowerPoint Slide The adaptive derivative-assembled pseudo-Trotter variational quantum eigensolver (ADAPT-VQE) has emerged as a pivotal promising approach for electronic structure challenges in quantum chemistry with noisy quantum devices. Nevertheless, to surmount existing technological constraints, this study endeavors to enhance ADAPT-VQE’s efficacy. Leveraging insights from the electronic structure theory, we concentrate on optimizing state preparation without added computational burden and guiding ansatz expansion to yield more concise wave functions with expedited convergence toward exact solutions. These advancements culminate in shallower circuits and, as demonstrated, reduced measurement requirements. This research delineates these enhancements and assesses their performance across mono, di, and tridimensional arrangements of H 4 models, as well as in the water molecule. Ultimately, this work attests to the viability of physically motivated strategies in fortifying ADAPT-VQE’s efficiency, marking a significant stride in quantum chemistry simulations.