The development of superconducting qubits, particularly the Transmon architecture, has emerged as a leading platform for scalable quantum computing due to significant advancements in coherence times and operational fidelity. In Brazil, the Quantum Device Physics Laboratory (LFDQ-IFGW) has established a full fabrication and measurement suite for these devices. This work details the design, fabrication, and cryogenic characterization of Transmon qubits developed entirely within the country, aiming to establish a fundamental baseline for national superconducting quantum hardware.
The development of superconducting qubits, particularly the Transmon architecture, has emerged as a leading platform for scalable quantum computing due to significant advancements in coherence times and operational fidelity. In Brazil, the Quantum Device Physics Laboratory (LFDQ-IFGW) has established a full fabrication and measurement suite for these devices. This work details the design, fabrication, and cryogenic characterization of Transmon qubits developed entirely within the country, aiming to establish a fundamental baseline for national superconducting quantum hardware.
Superconducting transmon qubits have seen significant progress in the last five years. By optimizing and exploring different fabrication process and superconducting material, transmon lifetime is more than 100 us with single-qubit gate and two-qubit gate fidelity is higher than to 99.8%. This thesis reports work to realize a transmon qubit fabrication process and experiment test bed. The experiment stage at the mixing chamber of the dilution fridge is designed and the microwave setup for qubit control and characterization is demonstrated. The qubit fabrication recipe using aluminum and Al/AlOx/Al junction is developed and measured. The qubit lifetime reach an average of 10 us and single-qubit gate fidelity is F = 99.883 +- 0.007%. While the parameters are moderate compared to the state of the art, this system is a good stepping stone to explore qubit scaling and optimization.
Abstract Superconducting qubits are multilevel micro-fabricated artificial atoms based on superconducting materials. They are mainly operated in the low microwave frequency range (2–8 GHz) and require to be cooled below 20 mK to maintain quantum coherence. They enable precise engineering of transition frequencies and coupling strengths, facilitating advancements in quantum information processing and light-matter interactions. The field has evolved from early devices, characterized by short coherence times, to modern architectures with improved noise resilience, scalability, and fidelity. Better performances have been achieved through innovations in materials, fabrication, control electronics, and circuit design, enabling qubits with millisecond coherence times and gate fidelities exceeding 99.9%. However, challenges remain in mitigating two-level system defects, scaling devices, and addressing the cryogenic and infrastructure needs of larger quantum processing units. Current research focuses on modular and scalable architectures, error correction, and application. The field’s progress highlights the potential for superconducting qubits to drive advancements in quantum computation.
This work presents a conceptual architecture and technological roadmap for a scalable superconducting quantum computing platform based on modular design principles. Rather than introducing a new qubit technology, the proposal focuses on addressing critical engineering bottlenecks that currently limit the large-scale deployment of quantum processors, including wiring complexity, electromagnetic crosstalk, fabrication yield, and latency in error-correction feedback loops.The proposed framework introduces a modular hybrid architecture (“Quantum Mesh”), where medium-scale quantum chiplets containing 25–50 superconducting transmon qubits are interconnected through advanced 3D packaging and cryogenic infrastructure. This approach aims to improve manufacturing yield, reduce wiring density, and enable rack-level integration of quantum processing units while maintaining high gate fidelities and manageable thermal loads.A second central element of the proposal is the integration of a high-fidelity digital twin environment capable of simulating qubit dynamics, noise sources, control latency, and thermal constraints at nanosecond resolution. This predictive framework is intended to support hardware iteration cycles prior to fabrication, potentially accelerating design optimization and system validation.The document outlines a three-year development pathway targeting 100–200 physical qubits and several logical qubits using surface code error correction, followed by a longer-term scaling strategy toward quantum fabrics exceeding one thousand qubits. By combining modular quantum chiplets, partial cryogenic electronics, and predictive digital twin modeling, the proposed architecture explores a plausible industrial pathway toward large-scale quantum computing systems.
The superconducting transmon qubit is a leading platform for quantum computing and quantum science. Building large, useful quantum systems based on transmon qubits will require significant improvements in qubit relaxation and coherence times, which are orders of magnitude shorter than limits imposed by bulk properties of the constituent materials. This indicates that relaxation likely originates from uncontrolled surfaces, interfaces, and contaminants. Previous efforts to improve qubit lifetimes have focused primarily on designs that minimize contributions from surfaces. However, significant improvements in the lifetime of two-dimensional transmon qubits have remained elusive for several years. Here, we fabricate two-dimensional transmon qubits that have both lifetimes and coherence times with dynamical decoupling exceeding 0.3 milliseconds by replacing niobium with tantalum in the device. We have observed increased lifetimes for seventeen devices, indicating that these material improvements are robust, paving the way for higher gate fidelities in multi-qubit processors.
Superconducting transmon qubits are a leading technology for quantum information processing, yet their reliable operation rests on meticulous calibration and characterization routines. These processes have been fine-tuned and are relatively well understood by the quantum computing community. Nevertheless, it is often challenging for newcomers to compile all the available information into a practical experimental flow. In this tutorial, we present a comprehensive walkthrough for the characterization and optimization of tunable transmon qubits, demonstrated on a commercial five-qubit processor. Moving beyond theoretical description, we detail in a straightforward manner the complete workflow, from cryogenic setup and wiring to parametric amplifier optimum operation, flux sweet-spot identification, pulse calibration, and readout optimization. We also demonstrate the characterization of qubit-qubit coupling, covering all steps before multiqubit operations. This guide serves as a reference for experimentalists seeking to efficiently bring up transmon-based quantum devices.
This thesis mainly summarizes two experiments that relate to building a quantum computer out of superconducting transmon qubits. Transmon qubits have emerged as one of the foremost solid state qubits, realizing processors with more than ten qubits and demonstrating small scale quantum algorithms as well as quantum error correction schemes. Right now, there is a race between different academic and industry research groups to scale up transmon qubit processors. The first experiment was a demonstration of qubit control by selective broadcasting in order to reduce the scaling of expensive electronics with the number of qubits for individual single-qubit control. We demonstrated that we can bring two transmon qubits to the same frequency (combining fabrication accuracy and in-situ fine tuning) and use the same hardware to control both, routing the pulses with a nanosecond-timescale vector switch matrix. Despite the compromises required by this technique, we show a scalable path to single qubit control beyond the threshold required for quantum error correction. In benchmarking, we take into account gate leakage due to the fact that transmons are fundamentally multi-level systems. In the second experiment we establish entanglement between two transmon qubits on different chips. We use an entanglement by measurement scheme and demonstrate that we can overcome minor fabrication imperfections by shaping our measurement pulses. Ultimately, performance is mainly limited by photon loss between the chips and up to the amplification chain. This entanglement mediated by traveling photons could be used to make a distributed transmon processor where computations are spread across several chip modules. This modularity could enable connectivities that cannot be realized on chip and ease fabrication requirements, as modules could be individually fabricated and selected. Thus, both of these experiments fit into the larger effort to converge on the hardware, control equipment and architecture of a future large-scale transmon quantum computer. Other experiments I contributed to are summarized in the conclusion chapter to show the diverse physics that can be studied in cQED experiments.