Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Modelling and experimental control of hot rubidium vapour in hollow-core fibres

Daniel R Häupl

Published Sep 15, 2025• 0 citations
Publisher

Abstract

Having a strong interaction between hot alkali vapour and light is important for Rydberg physics and nonlinear optics. In optical fibres, the tight confinement by the core offers high laser intensities for even moderate powers. With the invention of hollow-core photonic crystal fibres (HC-PCFs), the interaction of alkali atoms with high intensities over long distances could be studied. In the past, setups combining alkali atoms and a HC-PCF have suffered from long waiting times until atoms are evenly distributed along the fibre. The large size of the used vacuum chambers entailed technical challenges when trying to heat the system uniformly. In this thesis, an all-glass vapour cell incorporating a hollow-core fibre is presented. Its compact size allows fast and precise control of the temperature. Measurements have shown that this cell drastically reduces the time required for equilibration to only hours. Furthermore, the cell’s all-glass design permits unobstructed optical access from all sides. The optical access can be used to record the fluorescence emitted by atoms along the inside of the fibre core. In a first experiment, the frequency-dependent fluorescence along the fibre position was monitored while alkali vapour was diffusing out of the fibre. The atomic density was successfully retrieved using a numerical model based on the optical Bloch equations. Promising technical improvements of the cell design using fibre tapers are discussed, which could lead to an all-fibre vapour cell with fibre-integrated light delivery. The high laser intensity inside a HC-PCF can easily exceed the linear spectroscopy regime. Staying below the saturation intensity inside a waveguide might not always be easy—or even desired. However, established numerical software packages, such as ElecSus, are limited to the weak-probe regime. For that reason, an open-source software based on the Lindblad master equation was developed in this work. The software allows predicting the absolute value of the electric susceptibility for many experimental parameters of hot alkali vapours, including the isotope ratio, temperature or magnetic field strength. Most distinctly, it includes the laser intensity and effects such as optical pumping and transit-time broadening. To verify the model accuracy, spectra of 87Rb-filled cells were measured in a magnetic field of 0.6 T. Entering the hyperfine Paschen-Back regime, individual atomic resonances can be addressed, allowing further benchmarking of the model based on open and closed transitions. Comparing the experimental data with simulated spectra, very good agreement for three different beam diameters and for laser intensities over a range of more than five orders of magnitude was found. Finally, Rydberg states of rubidium—with their multitude of possible transitions—are discussed as a possible source of light in the terahertz (THz) region. In contrast to some other existing sources, THz from hot atomic vapour is expected to be very narrowband. In one report, the successful generation of THz in a four-level-system in hot rubidium vapour was observed. Here, a very similar setup was employed, but unfortunately no THz emission was detected. It is unclear if the reason is of fundamental or experimental nature. One potential route to enhance the THz signal strength at the detector is to channel the signal as much as possible by guiding it inside a waveguide. Appropriate waveguides were investigated, which in contrast to optical frequencies use polymers as a material. Using polymers, waveguides using the 3D printing technique were fabricated and guidance of THz light was observed.

DOI
10.25593/open-fau-2273

Related papers

Modelling spectra of hot alkali vapour in the saturation regime

Daniel R Häupl, Clare R. Higgins, Danielle Pizzey +5 more

Abstract Laser spectroscopy of hot atomic vapours has been studied extensively. Theoretical models that predict the absolute value of the electric susceptibility are crucial for optimising the design of photonic devices that use hot vapours, and for extracting parameters, such as external fields, when these devices are used as sensors. To date, most of the models developed have been restricted to the weak-probe regime. However, fulfilling the weak-probe power constraint may not always be easy, desired or necessary. Here we present a model for simulating the spectra of alkali-metal vapours for a variety of experimental parameters, most distinctly at intensities beyond weak laser fields. The model incorporates optical pumping effects and transit-time broadening. We test the performance of the model by performing spectroscopy of 87Rb in a magnetic field of 0.6 T, where isolated atomic resonances can be addressed. We find very good agreement between the model and data for three different beam diameters and a variation of intensity of over five orders of magnitude. The non-overlapping absorption lines allow us to differentiate the saturation behaviour of open and closed transitions. While our model was only experimentally verified for the D2 line of rubidium, the software is also capable of simulating spectra of rubidium, sodium, potassium and caesium over both D lines.

arXiv:2410.19916•New Journal of Physics•Feb 18, 2025•4 citations

Non-linear spectroscopy of rubidium in hollow-core fibres

Christopher Perrella

[Truncated] This thesis concerns a new photonic technology based on hollow-core photonic-crystal fibre (HC-PCF) that has been loaded with an atomic vapour. It was demonstrated that this technology may have important applications in the fields of metrology and quantum optics. Furthermore, the small size and robustness of HC-PCF allows these devices to potentially be miniaturised for possible commercial and industrial applications. By filling the HC-PCF with an atomic vapour, excellent light-atom coupling can be attained as both the atoms and light are confined within the same volume. The small transverse dimensions of the fibre’s optical mode leads to high intensities at low input powers, enabling efficient driving of non-linear transitions which would otherwise be difficult with free-space optical systems. Additionally, long interaction lengths, obtained through an arbitrary length of HC-PCF, lead to large optical depths on these typically weak non-linear transitions. The non-linear transition employed here is the 5S1/2 → 5D5/2 rubidium (Rb) two-photon transition. This system is of great interest due to its non-linearity, long excited state lifetime, efficient excitation and large optical depth attained within the HC-PCF. A number of methods for loading a HC-PCF with Rb are discussed, along with proposed ideas for making this process more efficient. Spectroscopic techniques were used to investigate the effect of the fibre’s confined geometry upon the atomic spectra. Extensive theoretical modelling was employed to confirm the observed spectra and give insight to the mechanisms behind the observations. Using this experimental and theoretical knowledge, two applications were targeted: optical atomic frequency standards; and cross phase modulation for quantum logic gates.

•Jan 1, 2013•0 citations

Spatially resolved spectroscopy of alkali metal vapour diffusing inside hollow-core photonic crystal fibres

Daniel R Häupl, Daniel Weller, Robert Löw +1 more

Abstract We present a new type of compact and all-glass based vapour cell integrating hollow-core photonic crystal fibres. The absence of metals, as in a traditional vacuum chamber and the much more compact geometry allows for fast and homogeneous heating. As a consequence we can fill the fibres on much faster timescales, ranging from minutes to hours. Additionally the all-glass design ensures optical access along the fibre. This allows live monitoring of the diffusion of rubidium atoms inside the hollow-core by measuring the frequency-dependent fluorescence from the atoms. The atomic density is numerically retrieved using a five-level system of Bloch-equations.

arXiv:2205.06148•New Journal of Physics•Oct 27, 2022•9 citations

Atomic vapours filled hollow core photonic crystal fibre for magneto-optical spectroscopy

Thomas D. Bradley

This thesis describes developments in atomic vapour loading in hollow core photonic crystal fibre (HC-PCF) for fabrication of atomic vapour loaded photonic microcells (PMC). These developments have been targeted at addressing some of the issues associated with loading atomic vapours in confined waveguiding geometries such as increased dephasing and physio-chemical wall absorptions. Atomic vapour loaded HC-PCF and PMC’s have applications in laser metrology, coherent optics and magneto optical spectroscopy. State of the art HC-PCF have been fabricated for loading with atomic vapour including both photonic bandgap (PBG) guiding and inhibited coupling (IC) hypocycloidal core shape Kagome HC-PCF. Record loss of 70 dB/km has been achieved in IC hypocycloid core shape Kagome HC-PCF in the spectral region centred at 800 nm. This fibre retains excellent single mode propagation combined with large core and increased optical bandwidth in comparison with specialist PBG HC-PCF optimised for operation around 800 nm. Aluminosilicate sol-gel coatings have been developed and successfully applied to the inner core wall of HC-PCF’s to reduce the atomic vapour surface interaction. Confining atomic vapours in micron scaled HC-PCF results in increased dephasing rates because of the frequent atom wall collisions. Anti relaxation coating materials have been applied to the inner core wall and the longitudinal relaxation time has been measured in coated and uncoated fibres utilising a magneto optical technique. Additionally sub Doppler transparencies are investigated in anti relaxation coated and uncoated HC-PCF.

•Feb 26, 2014•2 citations

Applications of the Faraday effect in hot atomic vapours

Mark A. Zentile

This thesis presents both a computational and experimental investigation into light propagation in hot alkali-metal vapours, with a particular focus on utilizing the Faraday effect for practical applications. A model to calculate various spectra for a weak-probe laser beam in an atomic medium with an applied axial magnetic field is presented. A computer program (ElecSus) was developed which implements this model efficiently. Using ElecSus we design optical devices such as Faraday filters and laser frequency stabilizing references. The design of Faraday filters utilizing compact vapour cells is shown, along with excellent agreement with experiment. The importance of including the effect of self broadening in the model is shown for these short path length vapour cells. Also, a Faraday filter is presented that can potentially be used for quantum optics experiments on the caesium D$_1$ line (894~nm). The filter displays the highest ratio of transmission to equivalent noise bandwidth to date for a linear Faraday filter, demonstrating the power of computerized optimization for this application. Furthermore, a Faraday filter is presented for use as an intra-cavity element in an external-cavity diode laser. A proof-of-principle experiment is demonstrated which shows that using a short external cavity with the Faraday filter eliminates mode-hops. Experimentally and theoretically the Faraday effect is investigated in large magnetic fields where alkali-metal atoms enter the hyperfine Paschen-Back regime. This hyperfine Paschen-Back Faraday effect is shown to allow a direct measure of the refractive indices for left and right circular polarized light. Furthermore, fitting the weak-probe spectra using ElecSus is found to give measures of the magnetic field with a fractional precision of the order of $10^{-4}$. In addition we study slow-light pulse propagation in a high density rubidium vapour, showing that our theoretical model for the electric susceptibility is valid for short pulses as well as continuous-wave light. This shows that the model is accurate for predicting weak-probe pulse propagation.

•Jan 1, 2015•4 citations

Compact and versatile caesium thermal photonic-cells based on microstructured hollow core fibres for frequency and time references

Marcelo Botelho Alonso

The recent developments in fabrication of hollow core Photonic crystal fibres (HC-PCFs), especially Anti-resonant fibres (ARFs), made this class of fibre very attractive for gas-phase applications, which ultimately led to the concept of photonic reference cell. This device is a fully-connectorised, stand-alone, HC-PCF filled with a gas specimen. Its application spans from instrument calibration, quantum optics to high-resolution spectroscopy and metrology. For time and frequency applications, the use of alkali metals with narrow atomic features (in the kHz range) is a requirement for ultra-stable reference signals. However, the coherence time of atoms is strongly dependent on the vapour dynamics and photonic cell geometry. This dependency limits the use of alkali vapour in miniaturised reference cells, such as photonic cells, because of the short coherence time that leads to atomic features in the MHz range, for reference cells with cross-section of 100 μm, operating at room temperature. The diffusion of the vapour can be tailored by adding a mixture of inert gas (buffer gas), with resulting atomic features between kHz and sub-kHz range. This is a very well-known method widely used in standard reference cells. This thesis reports on the advances in HC-PCFs technology for time and frequency reference applications. Firstly, I present a method to interconnect solid core fibres and HC-PCFs with dissimilar core sizes by employing a mode field adapter (MFA) to mediate the joint. I model and demonstrate the use of such MFAs for a photonic cell, fully-connectorised to SMFs. Secondly, I demonstrate for the first time spectroscopy of coherent population trapping (CPT) dark resonance in Kagome-lattice ARFs filled with Cs. CPT is a quantum effect very useful in frequency reference applications as it can provide an indirect measurement of the Cs clock transition (~9.2 GHz). I model and demonstrate world record line-width narrowing of CPT dark resonance in HC-PCFs and micro-metre scale capillaries filled with thermal Cs-vapour, with experimental observation of line-widths below 50 kHz for a Kagome-lattice ARF with a hollow core diameter of 125 μm.

•Jan 1, 2019•0 citations
Having a strong interaction between hot alkali vapour and light is important for Rydberg physics and nonlinear optics. In optical fibres, the tight confinement by the core offers high laser intensities for even moderate powers. With the invention of hollow-core photonic crystal fibres (HC-PCFs), the interaction of alkali atoms with high intensities over long distances could be studied. In the past, setups combining alkali atoms and a HC-PCF have suffered from long waiting times until atoms are evenly distributed along the fibre. The large size of the used vacuum chambers entailed technical challenges when trying to heat the system uniformly. In this thesis, an all-glass vapour cell incorporating a hollow-core fibre is presented. Its compact size allows fast and precise control of the temperature. Measurements have shown that this cell drastically reduces the time required for equilibration to only hours. Furthermore, the cell’s all-glass design permits unobstructed optical access from all sides. The optical access can be used to record the fluorescence emitted by atoms along the inside of the fibre core. In a first experiment, the frequency-dependent fluorescence along the fibre position was monitored while alkali vapour was diffusing out of the fibre. The atomic density was successfully retrieved using a numerical model based on the optical Bloch equations. Promising technical improvements of the cell design using fibre tapers are discussed, which could lead to an all-fibre vapour cell with fibre-integrated light delivery. The high laser intensity inside a HC-PCF can easily exceed the linear spectroscopy regime. Staying below the saturation intensity inside a waveguide might not always be easy—or even desired. However, established numerical software packages, such as ElecSus, are limited to the weak-probe regime. For that reason, an open-source software based on the Lindblad master equation was developed in this work. The software allows predicting the absolute value of the electric susceptibility for many experimental parameters of hot alkali vapours, including the isotope ratio, temperature or magnetic field strength. Most distinctly, it includes the laser intensity and effects such as optical pumping and transit-time broadening. To verify the model accuracy, spectra of 87Rb-filled cells were measured in a magnetic field of 0.6 T. Entering the hyperfine Paschen-Back regime, individual atomic resonances can be addressed, allowing further benchmarking of the model based on open and closed transitions. Comparing the experimental data with simulated spectra, very good agreement for three different beam diameters and for laser intensities over a range of more than five orders of magnitude was found. Finally, Rydberg states of rubidium—with their multitude of possible transitions—are discussed as a possible source of light in the terahertz (THz) region. In contrast to some other existing sources, THz from hot atomic vapour is expected to be very narrowband. In one report, the successful generation of THz in a four-level-system in hot rubidium vapour was observed. Here, a very similar setup was employed, but unfortunately no THz emission was detected. It is unclear if the reason is of fundamental or experimental nature. One potential route to enhance the THz signal strength at the detector is to channel the signal as much as possible by guiding it inside a waveguide. Appropriate waveguides were investigated, which in contrast to optical frequencies use polymers as a material. Using polymers, waveguides using the 3D printing technique were fabricated and guidance of THz light was observed.
Abstract Laser spectroscopy of hot atomic vapours has been studied extensively. Theoretical models that predict the absolute value of the electric susceptibility are crucial for optimising the design of photonic devices that use hot vapours, and for extracting parameters, such as external fields, when these devices are used as sensors. To date, most of the models developed have been restricted to the weak-probe regime. However, fulfilling the weak-probe power constraint may not always be easy, desired or necessary. Here we present a model for simulating the spectra of alkali-metal vapours for a variety of experimental parameters, most distinctly at intensities beyond weak laser fields. The model incorporates optical pumping effects and transit-time broadening. We test the performance of the model by performing spectroscopy of 87Rb in a magnetic field of 0.6 T, where isolated atomic resonances can be addressed. We find very good agreement between the model and data for three different beam diameters and a variation of intensity of over five orders of magnitude. The non-overlapping absorption lines allow us to differentiate the saturation behaviour of open and closed transitions. While our model was only experimentally verified for the D2 line of rubidium, the software is also capable of simulating spectra of rubidium, sodium, potassium and caesium over both D lines.
[Truncated] This thesis concerns a new photonic technology based on hollow-core photonic-crystal fibre (HC-PCF) that has been loaded with an atomic vapour. It was demonstrated that this technology may have important applications in the fields of metrology and quantum optics. Furthermore, the small size and robustness of HC-PCF allows these devices to potentially be miniaturised for possible commercial and industrial applications. By filling the HC-PCF with an atomic vapour, excellent light-atom coupling can be attained as both the atoms and light are confined within the same volume. The small transverse dimensions of the fibre’s optical mode leads to high intensities at low input powers, enabling efficient driving of non-linear transitions which would otherwise be difficult with free-space optical systems. Additionally, long interaction lengths, obtained through an arbitrary length of HC-PCF, lead to large optical depths on these typically weak non-linear transitions. The non-linear transition employed here is the 5S1/2 → 5D5/2 rubidium (Rb) two-photon transition. This system is of great interest due to its non-linearity, long excited state lifetime, efficient excitation and large optical depth attained within the HC-PCF. A number of methods for loading a HC-PCF with Rb are discussed, along with proposed ideas for making this process more efficient. Spectroscopic techniques were used to investigate the effect of the fibre’s confined geometry upon the atomic spectra. Extensive theoretical modelling was employed to confirm the observed spectra and give insight to the mechanisms behind the observations. Using this experimental and theoretical knowledge, two applications were targeted: optical atomic frequency standards; and cross phase modulation for quantum logic gates.
Abstract We present a new type of compact and all-glass based vapour cell integrating hollow-core photonic crystal fibres. The absence of metals, as in a traditional vacuum chamber and the much more compact geometry allows for fast and homogeneous heating. As a consequence we can fill the fibres on much faster timescales, ranging from minutes to hours. Additionally the all-glass design ensures optical access along the fibre. This allows live monitoring of the diffusion of rubidium atoms inside the hollow-core by measuring the frequency-dependent fluorescence from the atoms. The atomic density is numerically retrieved using a five-level system of Bloch-equations.
This thesis describes developments in atomic vapour loading in hollow core photonic crystal fibre (HC-PCF) for fabrication of atomic vapour loaded photonic microcells (PMC). These developments have been targeted at addressing some of the issues associated with loading atomic vapours in confined waveguiding geometries such as increased dephasing and physio-chemical wall absorptions. Atomic vapour loaded HC-PCF and PMC’s have applications in laser metrology, coherent optics and magneto optical spectroscopy. State of the art HC-PCF have been fabricated for loading with atomic vapour including both photonic bandgap (PBG) guiding and inhibited coupling (IC) hypocycloidal core shape Kagome HC-PCF. Record loss of 70 dB/km has been achieved in IC hypocycloid core shape Kagome HC-PCF in the spectral region centred at 800 nm. This fibre retains excellent single mode propagation combined with large core and increased optical bandwidth in comparison with specialist PBG HC-PCF optimised for operation around 800 nm. Aluminosilicate sol-gel coatings have been developed and successfully applied to the inner core wall of HC-PCF’s to reduce the atomic vapour surface interaction. Confining atomic vapours in micron scaled HC-PCF results in increased dephasing rates because of the frequent atom wall collisions. Anti relaxation coating materials have been applied to the inner core wall and the longitudinal relaxation time has been measured in coated and uncoated fibres utilising a magneto optical technique. Additionally sub Doppler transparencies are investigated in anti relaxation coated and uncoated HC-PCF.
This thesis presents both a computational and experimental investigation into light propagation in hot alkali-metal vapours, with a particular focus on utilizing the Faraday effect for practical applications. A model to calculate various spectra for a weak-probe laser beam in an atomic medium with an applied axial magnetic field is presented. A computer program (ElecSus) was developed which implements this model efficiently. Using ElecSus we design optical devices such as Faraday filters and laser frequency stabilizing references. The design of Faraday filters utilizing compact vapour cells is shown, along with excellent agreement with experiment. The importance of including the effect of self broadening in the model is shown for these short path length vapour cells. Also, a Faraday filter is presented that can potentially be used for quantum optics experiments on the caesium D1_11​ line (894~nm). The filter displays the highest ratio of transmission to equivalent noise bandwidth to date for a linear Faraday filter, demonstrating the power of computerized optimization for this application. Furthermore, a Faraday filter is presented for use as an intra-cavity element in an external-cavity diode laser. A proof-of-principle experiment is demonstrated which shows that using a short external cavity with the Faraday filter eliminates mode-hops. Experimentally and theoretically the Faraday effect is investigated in large magnetic fields where alkali-metal atoms enter the hyperfine Paschen-Back regime. This hyperfine Paschen-Back Faraday effect is shown to allow a direct measure of the refractive indices for left and right circular polarized light. Furthermore, fitting the weak-probe spectra using ElecSus is found to give measures of the magnetic field with a fractional precision of the order of 10−410^{-4}10−4. In addition we study slow-light pulse propagation in a high density rubidium vapour, showing that our theoretical model for the electric susceptibility is valid for short pulses as well as continuous-wave light. This shows that the model is accurate for predicting weak-probe pulse propagation.
The recent developments in fabrication of hollow core Photonic crystal fibres (HC-PCFs), especially Anti-resonant fibres (ARFs), made this class of fibre very attractive for gas-phase applications, which ultimately led to the concept of photonic reference cell. This device is a fully-connectorised, stand-alone, HC-PCF filled with a gas specimen. Its application spans from instrument calibration, quantum optics to high-resolution spectroscopy and metrology. For time and frequency applications, the use of alkali metals with narrow atomic features (in the kHz range) is a requirement for ultra-stable reference signals. However, the coherence time of atoms is strongly dependent on the vapour dynamics and photonic cell geometry. This dependency limits the use of alkali vapour in miniaturised reference cells, such as photonic cells, because of the short coherence time that leads to atomic features in the MHz range, for reference cells with cross-section of 100 μm, operating at room temperature. The diffusion of the vapour can be tailored by adding a mixture of inert gas (buffer gas), with resulting atomic features between kHz and sub-kHz range. This is a very well-known method widely used in standard reference cells. This thesis reports on the advances in HC-PCFs technology for time and frequency reference applications. Firstly, I present a method to interconnect solid core fibres and HC-PCFs with dissimilar core sizes by employing a mode field adapter (MFA) to mediate the joint. I model and demonstrate the use of such MFAs for a photonic cell, fully-connectorised to SMFs. Secondly, I demonstrate for the first time spectroscopy of coherent population trapping (CPT) dark resonance in Kagome-lattice ARFs filled with Cs. CPT is a quantum effect very useful in frequency reference applications as it can provide an indirect measurement of the Cs clock transition (~9.2 GHz). I model and demonstrate world record line-width narrowing of CPT dark resonance in HC-PCFs and micro-metre scale capillaries filled with thermal Cs-vapour, with experimental observation of line-widths below 50 kHz for a Kagome-lattice ARF with a hollow core diameter of 125 μm.