Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Aspects of optical bistability in atomic sodium

Werner E Schulz

Published Jan 1, 1985• 0 citations
OpenAlex

Abstract

Experiments were performed on a bistable system consisting of a low finesse cavity and sodium atoms as the nonlinear medium. The atoms were excited by a dye laser system tuned to the D lines. Both ring and Fabry-Perot configurations were employed, and steady-state as well as transient behaviour was investigated. Flat mirrors of approximately 93% reflectivity were used in all experiments. With sodium vapour as the medium, experiments were performed in steady state, and a marked difference was observed in the behaviour of the Fabry-Perot cavity as compared to the ring set-up. This discrepancy could be explained when the sodium transition was modelled as a three - level lambda -type system, where the Doppler width is of the same order of magnitude as the ground state splitting. In this case the atoms with a Doppler shift close to half the ground state splitting have a major influence on the macroscopic refractive index. Extensive computer simulations were performed using this three -level model, and good qualitative agreement between experiment and theory was obtained for both types of cavity. A vacuum system containing a multiple atomic beam apparatus was constructed in order to reduce the Doppler width. Both the ring and the Fabry-Perot configuration could be set up inside the vacuum chamber.. The steady-state experiments displayed bistability when the laser intensity, laser frequency or cavity frequency were cycled. At higher atomic densities the system showed instabilities and multiple switching.

Related papers

Time-dependent Studies of Optical Bistability in Atomic Sodium

W. Schulz, W. R. MacGillivray, M. C. Standage

A bistable system consisting of an optical cavity with a medium of sodium atomic beams has been subjected to square pulses of light resonant with a D transition. The lifetimes of the field in the cavity and of the atomic medium are approximately equal. The system transmission data recorded has been compared with simulated data calculated from a theoretical model which treats the atomic energy configuration associated with the D lines as a three-level, lambda-type. Good qualitative agreement is obtained showing the system switching on to the high transmission branch. In particular, as the intensity of the input pulse ends, from the high intensity side, to the low to high branch transition threshold, switching is delayed by a time which is more than one order of magnitude longer than the field and atomic lifetimes.

Australian Journal of Physics•Jun 1, 1989•2 citations

Behavior of sodium atomic vapor in optical cavities below the threshold for bistability

W. Schulz, W. R. MacGillivray, M. C. Standage

A study is presented of the transmission characteristics of low-finesse ring and Fabry-Perot optical cavities containing sodium vapor and operated below the threshold for optical bistability. Novel features are observed in the transmission signals obtained as the laser light frequency is swept through resonance with a sodium D transition. The ring cavity transmission peaks display a broad absorption profile except for the peak which is tuned to the center of the profile which is almost completely transmitted. A similarly tuned cavity transmission peak in the Fabry-Perot \'etalon is split into three, with the central peak being very narrow. A theoretical description for each cavity is developed in terms of a \ensuremath{\Lambda}-type, three-state model for the atomic energy levels associated with the transition. Using parameter values based on the experimental conditions, theoretical transmission signals for the linear cavity are obtained which are in good detailed agreement with the experimental results. For the ring cavity, agreement is also good except for the degree of absorption of the central peak.

Physical Review A•Aug 1, 1987•2 citations

Optical Bistability with Two-State Atoms: Steady States and Dynamical Instabilities

Harry J. Kimble, Albert T. Rosenberger, Luis A. Orozco +1 more

Beams of homogeneously broadened two-state sodium atoms in a confocal ring resonator have been employed to investigate the steady-state characteristics of absorptive [1] and dispersive optical bistability. Also studied in the same system is the dynamical behavior due to the intrinsic single-longitudinal-mode instability [2] originating in the alteration of the atomic absorption profile by a strong field as in the Lorenz-type instability in the homogeneously broadened laser. All experimental parameters are carefully measured and corrected for transit broadening, finite absorption, and residual Doppler broadening in order to be able to make an absolute comparison with the single-Gaussian-transverse-mode theory [3-6]. Despite the frequency degeneracy of the transverse modes of the resonator, the agreement with this theory for absorptive bistability is remarkably good. The dispersive bistability data are more difficult to interpret, but they seem to be in reasonable agreement with the theory; the same can be said of the results for the domain and oscillation frequency of the instability, at least within a certain region of parameter space. Outside this region, multiple unstable states appear for various intracavity intensities; recent observations suggest that these may be due in part to instabilities involving higher-order transverse modes of the resonator.

Topical Meeting on Optical Bistability (OB)•Jan 1, 1985•1 citation

Optical Bistability Experiments Using Samarium Vapour

Weston J. Sandle, Christian G. Parigger

Experimental investigations of optical bistability (OB) for systems with degenerate lower states have up to now relied principally on atomic sodium [1-4]. The study of the influence of lower level coherence effects in OB [5] is greatly aided by the use of a nonlinear medium having a transition with integral electronic angular momentum character. A suitable choice upon which we report here is the 4f6 6s2 (7F1) to 4f6 6s6p (7Foo) 570.68-nm transition in SmI, driven by linearly polarized laser excitation in a near-concentric Fabry-Perot cavity. Unlike the case of the Na J = 1/2 to J = 1/2 D1 transition, for which polarization asymmetry in switching (PS) develops spontaneously [1-4], for the above transition we find that the symmetry in the polarization is conserved. No polarization differences of σ+ with respect to σ− develop in the output from the optical cavity. This behaviour accords with the theoretical expectation [6] that PS is suppressed by transverse optical pumping.

Topical Meeting on Optical Bistability (OB)•Jan 1, 1985•0 citations

Experimental study of the response of a bad cavity bistable system to fast light switch-on

W. E. Schulz, W. R. MacGillivray, M. C. Standage

Abstract Preliminary results are reported on the response of an intrinsic bistable system to the rapid switch-on of an injected light field. The bistable system consists of a linear array of 25 sodium atomic beams contained in a low finesse Fabry—Perot etalon. The beams are aligned perpendicular to the direction of propagation of the cavity field and are collimated sufficiently to resolve the D-line ground state 32S1/2 hyperfine structure. The etalon conditions are such that the cavity lifetime is an estimated 6 ns compared with the atomic lifetime of 16 ns; hence the system approaches the bad cavity limit in which the atom dynamics should be observable. The radiation from a single-mode ring dye laser is switched on to the bistable system in approximately 1 ns. Although preliminary results show low branch to high branch switching there is no evidence of the expected nutational oscillations.

Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences•Dec 18, 1984•3 citations

Observation of absorptive bistability with two-level atoms in a ring cavity

Albert T. Rosenberger, Luis A. Orozco, Harry J. Kimble

Observations of steady-state hysteresis in absorptive bistability are reported for well-collimated atomic beams of sodium within a traveling-wave interferometer. The atomic medium approximates a system of homogeneously broadened "two-level" atoms, and effects due to standing waves are eliminated. The experiment thus represents the first demonstration of optical bistability under conditions that have been widely employed in theoretical models. Absolute measurements of switching intensities versus atomic cooperativity $C$ are reported, and a preliminary comparison with Gaussian-beam theory is made.

Physical Review A•Oct 1, 1983•144 citations
Experiments were performed on a bistable system consisting of a low finesse cavity and sodium atoms as the nonlinear medium. The atoms were excited by a dye laser system tuned to the D lines. Both ring and Fabry-Perot configurations were employed, and steady-state as well as transient behaviour was investigated. Flat mirrors of approximately 93% reflectivity were used in all experiments. With sodium vapour as the medium, experiments were performed in steady state, and a marked difference was observed in the behaviour of the Fabry-Perot cavity as compared to the ring set-up. This discrepancy could be explained when the sodium transition was modelled as a three - level lambda -type system, where the Doppler width is of the same order of magnitude as the ground state splitting. In this case the atoms with a Doppler shift close to half the ground state splitting have a major influence on the macroscopic refractive index. Extensive computer simulations were performed using this three -level model, and good qualitative agreement between experiment and theory was obtained for both types of cavity. A vacuum system containing a multiple atomic beam apparatus was constructed in order to reduce the Doppler width. Both the ring and the Fabry-Perot configuration could be set up inside the vacuum chamber.. The steady-state experiments displayed bistability when the laser intensity, laser frequency or cavity frequency were cycled. At higher atomic densities the system showed instabilities and multiple switching.
A bistable system consisting of an optical cavity with a medium of sodium atomic beams has been subjected to square pulses of light resonant with a D transition. The lifetimes of the field in the cavity and of the atomic medium are approximately equal. The system transmission data recorded has been compared with simulated data calculated from a theoretical model which treats the atomic energy configuration associated with the D lines as a three-level, lambda-type. Good qualitative agreement is obtained showing the system switching on to the high transmission branch. In particular, as the intensity of the input pulse ends, from the high intensity side, to the low to high branch transition threshold, switching is delayed by a time which is more than one order of magnitude longer than the field and atomic lifetimes.
A study is presented of the transmission characteristics of low-finesse ring and Fabry-Perot optical cavities containing sodium vapor and operated below the threshold for optical bistability. Novel features are observed in the transmission signals obtained as the laser light frequency is swept through resonance with a sodium D transition. The ring cavity transmission peaks display a broad absorption profile except for the peak which is tuned to the center of the profile which is almost completely transmitted. A similarly tuned cavity transmission peak in the Fabry-Perot \'etalon is split into three, with the central peak being very narrow. A theoretical description for each cavity is developed in terms of a \ensuremath{\Lambda}-type, three-state model for the atomic energy levels associated with the transition. Using parameter values based on the experimental conditions, theoretical transmission signals for the linear cavity are obtained which are in good detailed agreement with the experimental results. For the ring cavity, agreement is also good except for the degree of absorption of the central peak.
Beams of homogeneously broadened two-state sodium atoms in a confocal ring resonator have been employed to investigate the steady-state characteristics of absorptive [1] and dispersive optical bistability. Also studied in the same system is the dynamical behavior due to the intrinsic single-longitudinal-mode instability [2] originating in the alteration of the atomic absorption profile by a strong field as in the Lorenz-type instability in the homogeneously broadened laser. All experimental parameters are carefully measured and corrected for transit broadening, finite absorption, and residual Doppler broadening in order to be able to make an absolute comparison with the single-Gaussian-transverse-mode theory [3-6]. Despite the frequency degeneracy of the transverse modes of the resonator, the agreement with this theory for absorptive bistability is remarkably good. The dispersive bistability data are more difficult to interpret, but they seem to be in reasonable agreement with the theory; the same can be said of the results for the domain and oscillation frequency of the instability, at least within a certain region of parameter space. Outside this region, multiple unstable states appear for various intracavity intensities; recent observations suggest that these may be due in part to instabilities involving higher-order transverse modes of the resonator.
Experimental investigations of optical bistability (OB) for systems with degenerate lower states have up to now relied principally on atomic sodium [1-4]. The study of the influence of lower level coherence effects in OB [5] is greatly aided by the use of a nonlinear medium having a transition with integral electronic angular momentum character. A suitable choice upon which we report here is the 4f6 6s2 (7F1) to 4f6 6s6p (7Foo) 570.68-nm transition in SmI, driven by linearly polarized laser excitation in a near-concentric Fabry-Perot cavity. Unlike the case of the Na J = 1/2 to J = 1/2 D1 transition, for which polarization asymmetry in switching (PS) develops spontaneously [1-4], for the above transition we find that the symmetry in the polarization is conserved. No polarization differences of σ+ with respect to σ− develop in the output from the optical cavity. This behaviour accords with the theoretical expectation [6] that PS is suppressed by transverse optical pumping.
Abstract Preliminary results are reported on the response of an intrinsic bistable system to the rapid switch-on of an injected light field. The bistable system consists of a linear array of 25 sodium atomic beams contained in a low finesse Fabry—Perot etalon. The beams are aligned perpendicular to the direction of propagation of the cavity field and are collimated sufficiently to resolve the D-line ground state 32S1/2 hyperfine structure. The etalon conditions are such that the cavity lifetime is an estimated 6 ns compared with the atomic lifetime of 16 ns; hence the system approaches the bad cavity limit in which the atom dynamics should be observable. The radiation from a single-mode ring dye laser is switched on to the bistable system in approximately 1 ns. Although preliminary results show low branch to high branch switching there is no evidence of the expected nutational oscillations.
Observations of steady-state hysteresis in absorptive bistability are reported for well-collimated atomic beams of sodium within a traveling-wave interferometer. The atomic medium approximates a system of homogeneously broadened "two-level" atoms, and effects due to standing waves are eliminated. The experiment thus represents the first demonstration of optical bistability under conditions that have been widely employed in theoretical models. Absolute measurements of switching intensities versus atomic cooperativity CCC are reported, and a preliminary comparison with Gaussian-beam theory is made.