Scaling superconducting quantum processors to hundreds of qubits requires frequency-multiplexed readout architectures, where the non-uniform gain profile of Traveling-Wave Parametric Amplifiers (TWPAs) creates a critical bottleneck. We present an automated optimization framework that addresses the weakest link problem in multiplexed readout by employing a geometric mean cost function to maintain a uniform signal-to-noise ratio (SNR) profile across all channels. Through systematic characterization of a 5-qubit system, we demonstrate that readout fidelity saturates above SNR ≈ 2.5, indicating that in the high-performance regime SNR is a more effective optimization metric for TWPAs than readout fidelity. Our optimization framework, based on the Nelder-Mead simplex algorithm with continuous parameter tuning, reaches the optimized operating point in ∼100 measurements, reducing the search effort by a factor of 4.5 compared to a 451-point exhaustive grid method. Notably, the continuous optimization surpasses the grid search maximum by 12.8% in geometric mean SNR, confirming its superior efficiency over conventional grid search methods. This automated approach provides a scalable solution for maintaining a uniformly high level of readout fidelity across various amplifier devices in large-scale quantum processors.
Scaling superconducting quantum processors to hundreds of qubits requires frequency-multiplexed readout architectures, where the non-uniform gain profile of Traveling-Wave Parametric Amplifiers (TWPAs) creates a critical bottleneck. We present an automated optimization framework that addresses the weakest link problem in multiplexed readout by employing a geometric mean cost function to maintain a uniform signal-to-noise ratio (SNR) profile across all channels. Through systematic characterization of a 5-qubit system, we demonstrate that readout fidelity saturates above SNR ≈ 2.5, indicating that in the high-performance regime SNR is a more effective optimization metric for TWPAs than readout fidelity. Our optimization framework, based on the Nelder-Mead simplex algorithm with continuous parameter tuning, reaches the optimized operating point in ∼100 measurements, reducing the search effort by a factor of 4.5 compared to a 451-point exhaustive grid method. Notably, the continuous optimization surpasses the grid search maximum by 12.8% in geometric mean SNR, confirming its superior efficiency over conventional grid search methods. This automated approach provides a scalable solution for maintaining a uniformly high level of readout fidelity across various amplifier devices in large-scale quantum processors.
Increasing the size and complexity of quantum information systems requires highly-multiplexed readout architectures, as well as amplifier chains operating near the quantum limit (QL) of added noise. While documented prior efforts in KI-TWPA integration in quantum systems are scarce, in this work we demonstrate integration of a KI-TWPA with a multiplexed-qubit device. To quantify the system noise improvement we perform an ac Stark shift calibration to precisely determine noise power levels on-chip (at each cavity's reference plane) and the total system gain. We then characterize the qubit state measurement fidelity and the corresponding signal-to-noise ratio (SNR). To conduct the most faithful measurement of the benefits offered by the KI-TWPA we perform these measurements for readout chains where the high electron mobility transistor (HEMT) amplifier is the first-stage amplifier (FSA) – with none of the external hardware required to operate the KI-TWPA – and with the KI-TWPA as the FSA. While some readout cavities fall outside the KI-TWPA bandwidth, for those inside the bandwidth we demonstrate a maximum improvement in the state measurement SNR by a factor of 1.45, and increase the fidelity from 96.2% to 97.8%. These measurements demonstrate a system noise below 5 quantareferenced on-chipand we bound the KI-TWPA excess noise to be below 4 quanta for the six cavities inside its bandwidth. These results show a promising path forward for realizing quantum-limited readout chains in large qubit systems using a single parametric amplifier.
Low-noise parametric amplifiers are widely used as the first-stage amplifier in qubit readout chains. The performance of parametric amplifiers depends sensitively on the choice of the pump condition. We propose a strategy for determining the pump condition that is tailored for fast multiplexed readout. Choosing the amplifier pump to maximize the signal-to-noise ratio (SNR) improvement at the readout frequency of the limiting qubit--the qubit that requires the longest readout time to reach a target SNR--minimizes the total multiplexed readout time. We demonstrate our pump calibration strategy experimentally on a five-qubit multiplexed readout chain with a traveling-wave parametric amplifier. Using our strategy, we reduce the multiplexed readout time by 320 ns compared to optimizing the average SNR improvement on all qubits, without degrading the target SNR for any qubit.
Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in Si MOS transistorlike devices eases future industrial-scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radio-frequency reflectometry only requires the already existing transistor gates to read a quantum dot state, which alleviates the need for additional elements. In this effort toward scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below that of typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3-GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in Si MOS multigate devices, with SNR enhanced due to a Josephson traveling-wave parametric amplifier (JTWPA). The broad tunable 2-GHz amplification bandwidth combined with more than 10-dB ON-OFF SNR improvement of the JTWPA enables frequency and time-division-multiplexed readout of interdot transitions, and noise performance consistent with JTWPA characteristics at higher frequencies. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performance up to a magnetic field of 1.1 T at the quantum dot device, compatible with standard Si MOS spin-qubit experiments.
Advancing error-corrected quantum computing and fundamental science necessitates quantum-limited amplifiers with near-ideal quantum efficiency and multiplexing capability. However, existing solutions achieve one at the expense of the other; for example, Josephson traveling wave parametric amplifiers (JTWPAs) are highgain, broadband, and chip-based quantum amplifiers that conventionally incur a bandwidth-noise tradeoff. When operated at 20-dB gain and instantaneous bandwidths of a few GHz, JTWPAs typically reach near-quantum limited intrinsic efficiencies of 70% - 85% relative to that of an ideal phase-preserving quantum amplifier. This is due to information leakage to the sidebands of the JTWPA, which can be recovered by adiabatically transforming the input modes to Floquet modes of the system within the device. In this thesis, we experimentally demonstrate the first Floquet-mode travelingwave parametric amplifier (Floquet TWPA). Fabricated in a superconducting qubit process, this Floquet TWPA achieves minimal dissipation, quantum-limited noise performance, and broadband operation. Our device exhibits > 20-dB amplification over a 3-GHz instantaneous bandwidth, <0.5 -dB average in-band insertion loss, and the highest-reported intrinsic quantum efficiency for a TWPA of 92.1±7.6%, relative to an ideal phase-preserving amplifier. When measuring a superconducting qubit, our Floquet TWPA enables a system measurement efficiency of 65.1 ± 5.8%, the highest-reported in a superconducting qubit readout experiment utilizing phase-preserving amplifiers to the best of our knowledge. Finally, we discuss the noise limitations of our current experimental setup, as well as impedance matching strategies that will enable us to push towards ideal JTWPA performance. These general-purpose Floquet TWPAs are suitable for fast, high-fidelity multiplexed readout in large-scale quantum systems and future monolithic integration with quantum processors.
Advancing fault-tolerant quantum computing and fundamental science necessitates quantum-limited amplifiers with near-ideal quantum efficiency and multiplexing capability. However, existing solutions typically achieve one at the expense of the other. In this work, we experimentally demonstrate the first Floquet-mode traveling-wave parametric amplifier (Floquet TWPA), which achieves nearly quantum-limited noise performance, minimal dissipation, and broadband operation, breaking the presumption that broadband amplifiers introduce higher noise. We achieve a system measurement efficiency of 65.1±5.8% when measuring a superconducting qubit, which to our knowledge is the highest-reported in a superconducting qubit readout experiment utilizing phase-preserving amplifiers. Our device exhibits >20-dB amplification over a 3-GHz instantaneous bandwidth, <0.5-dB average in-band insertion loss, and the highest reported intrinsic quantum efficiency for a TWPA of 92.1±7.6%, relative to an ideal phase-preserving amplifier. Fabricated in a superconducting qubit process, these general-purpose Floquet TWPAs are suitable for fast, high-fidelity multiplexed readout in large-scale quantum systems and future monolithic integration with quantum processors.
In order to build a large-scale quantum computer, one of the requirements is high-fidelity
multiplexed qubit readout, which in turn relies on the use of ultralow-noise
amplifiers. While Josephson Parametric Amplifiers (JPAs), using a cavity with
few Josephson junctions, have shown promising results for single qubit readout,
they have limitations such as low saturation power and a gain-bandwidth product
restriction. This makes them less suited for frequency multiplexed qubit readout. A
current-pumped Josephson Travelling-Wave Parametric Amplifier (JTWPA), using
4-wave mixing in a lumped-element transmission line, features both high saturation
power as well as no restriction on large bandwidth and high gain. This is possible
due to multiple junctions and the lack of a cavity. However, also this current pumped
JTWPA has an inherent problem, namely phase mismatch between the pump and
the signal. This prevents exponential gain. In this thesis, a current pumped JTWPA
using the resonant phase matching (RPM) technique to reduce the phase mismatch
problem is studied and characterised. The JTWPA shows high gain, high saturation
power and a large signal-to-noise ratio improvement. The JTWPA is also used for
qubit readout, for which it clearly improves the readout fidelity.